Scribd
Upload
259 views1 page

Error Code Bizhub 350

The document lists various malfunction codes, malfunction names, and detection timings for a printer or copier. It includes malfunctions for the main motor, imaging unit motor, EDH fan motor, cooling fan, power unit cooling fan, IU cooling fan, abnormal image transfer voltage, fusing warm-up failure for the main unit, and fusing warm-up failure for the sub unit. Detection involves monitoring signals and temperatures and looking for abnormalities over set periods of time for motors and temperatures.

Uploaded by

Fotocopy Chanel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
259 views1 page

Error Code Bizhub 350

The document lists various malfunction codes, malfunction names, and detection timings for a printer or copier. It includes malfunctions for the main motor, imaging unit motor, EDH fan motor, cooling fan, power unit cooling fan, IU cooling fan, abnormal image transfer voltage, fusing warm-up failure for the main unit, and fusing warm-up failure for the sub unit. Detection involves monitoring signals and temperatures and looking for abnormalities over set periods of time for motors and temperatures.

Uploaded by

Fotocopy Chanel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Malfunction Code Malfunction Name Detection Timing

C0000 Main Motor Failure


• The Transport Motor Lock signal remains set to H
for a set period of time while the Transport Motor is turning.

C0010 Imaging Unit Motor Failure


• The Imaging Unit Motor Lock signal remains set to H for a set
period of time while the Imaging Unit Motor is turning.
• The Imaging Unit Motor Lock signal remains set to
L for a set period of time while the Imaging Unit
Motor remains stopped.

C0044 EDH Fan Motor Failure


• Refer to the Service Manual for the relevant option.

C0045 Cooling Fan Failure


• The Cooling Fan Motor Lock signal remains set to
H for a set period of time while the Cooling Fan
Motor is turning.
• The Cooling Fan Motor Lock signal remains set to
L for a set period of time while the Cooling Fan
Motor remains stopped.

C004E Power Unit Cooling Fan Failure


• The Power Unit Cooling Fan Motor Lock signal
remains set to H for a set period of time while the
Power Unit Cooling Fan Motor is turning.
• The Power Unit Cooling Fan Motor Lock signal
remains set to L for a set period of time while the
Power Unit Cooling Fan Motor remains stopped.

C004F IU Cooling Fan Failure


• The I/U Cooling Fan Motor Lock signal remains set
to H for a set period of time while the I/U Cooling Fan Motor is turning.
• The I/U Cooling Fan Motor Lock signal remains set to L for
a set period of time while the I/U Cooling Fan Motor remains stopped.

C0214 Abnormal Image Transfer Voltage


• The image transfer voltage exceeds 100 V for the
set period of time while the Imaging Unit Motor
remains stopped.

C0500 Fusing Warm-Up Failure (Main)


• The Fusing Roller Thermistor does not detect the
required temperature within 30 sec. after a warmcycle has begun;
therefore, the copier does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not
reach the required level even after the set period of
time has elapsed during a warm-up cycle.

C0501 Fusing Warm-Up Failure(Sub)


• The Fusing Roller Sub Thermistor does not detect
the required temperature within 30 sec. after a warm-up cycle has
begun;
therefore, the copier does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not reach the required level
even after the set period of time has elapsed during a warm-up cycle.

You might also like