Professional Qualification: Career Objective
Professional Qualification: Career Objective
Professional Qualification: Career Objective
PROFESSIONAL QUALIFICATION
Supervision of civil and Structural works with the aid of Contract specification, PUB
Specification, COP & BCA regulations.
9. Conduct the monthly progress meeting and prepare the meeting notes.
Supervision of civil and Structural works with the aid of Contract specification, LTA M&W
Specification, COP & BCA regulations.
Deep excavation for gas pipe (Hand mine tunneling through the RC wall Base)
Sheet piling – Supervising the Pile installation, supporting (waler and strut), dismantling the
supports and extracting the sheet piles.
III. RC works.
Suspended and non-suspended slabs, apron slab, retaining wall, pile cap and footing for all
kind of supports.
Rebar works - Check the rebar with construction drawing. (Size, spacing, cleanness,
trimming bars, anchorage and lapping).
Form work – Checking the stability with the formwork design, free of void and straight
enough to maintain the shape.
Casting – Test slump of the fresh concrete at the point of delivery, make test cubes for
every 24m3 and allow casting with proper vibration.
RC retaining wall construction (max height 6.3 m height with 3m retaining capacity)
Prepare rebar schedule.
Check the rebar binding, cleanness and verticality of the foam work and mark the finishing
level.
Supervise the concrete casting in proper manner to avoid segregation and cold joint.
6. Maintain proper and updated daily record of all works done, including records of tests, inspections,
status of works, safety, site diary, materials and equipment on site, etc.
Responsible for Bored Piling work in soil Investigation, depth confirmation, site-in-charge at
lowering Steel cages, pouring concrete at bored piles and Monitoring in deep Excavation, pile
rectification work .
o Check pile reinforcement with construction drawing.
o Depth & Verticality confirmation of the pile.
o Concrete pouring.
o Arrange piling related tests (Ultimate load test, working load test, and PIT and PDA
tests).
Arrange site inspection by coordinate with RTO/RE.
Installation and monitoring the Sheet pile.
Co-ordinate with the clients, consultants on all project aspects.
Liaising with relevant professional staff.
Conducted meetings with sub-contractors on technical and quality issues.
Ensure safe work procedures and environmental control measures are implemented at the work
site.
Prepare method of statements and other submissions.
Prepare and submit all daily/weekly reports as required.
Bridge engineer : 15 March 2011 – 31 May 2012 Srilanka
Company : United Nations office for Project services (UNOPS)
Project : RCC Arch Bridge project. (Proposed bridge is a rigid frame RCC Arch bridge , 95m in
length, has 220m approach road both ends.)
Responsibilities:
Supervision – supervision of all activities in connection with RCC Arch bridge construction such as
formwork, reinforcement works & concreting.
Responsible for Bored cast- in-situ piling works.
Preparation and submission of progress report.
Preparation of work schedules, materials and machinery requirements and follow up with the
contractor accordingly to achieve results.
Organizing site meetings, monthly meetings and preparing relevant reports.
CERTIFICATES
PROFESSIONAL MEMBERSHIP
Associate member of Institution of Engineers, Sri Lanka (IESL- Mem no: AM 14552)
Member of Tunnelling and underground construction society Singapore (TUCSS-Mem no:1936)