Consensus Standards Referenced in OR-OSHA Standards

Available in the Resource Center unless otherwise noted

Standards Referenced in OR-OSHA Standards OR-OSHA Standard Latest Date Available Comments

ANSI Z87.1-1989, "Occupational and Educational

Eye and Face Protection" Div 2/I - 1910.133 1997

CGA G-7.1-1989, "Compressed Gas Association

Commodity Specification for Air" Div 2/I - 1910.134 1997

ANSI Z89.1-1969, "Industrial Head Protection" Div 2/I - 1910.135 1997

ANSI Z41-1991, "Personal Protection - Protective

Footwear" Div 2/I - 1910.136 1999

ANSI Z41.1-1967, "Men's Safety-Toe Footwear" Div 2/I - 1910.136 Now in ANSI Z41

ANSI A120.1-1970, "Powered Platforms for Exterior

Building Maintenance" Div 2/F - 1910.66 2001

NFPA 70-1971 Div 2/F - 1910.66 2002

ANSI A92.2-1969, "Vehicle Mounted Elevating and

Rotating Work Platforms" Div 2/F - 1910.67 2002

ANSI/ASME A90.1-1969, "Manlifts" Div 2/F - 1910.68 1997

ANSI B15.1-1953 (R 1958) Div 2/F - 1910.68 2000

Superseeded by
ANSI A12.1-1967 Div 2/F - 1910.68 A1264.1-1995

ANSI A14.3-1956 Div 2/F - 1910.68 1992

ANSI Z33.1-1961, "Design and Operation of Local Superseeded by

Exhaust Systems" Div 2/G - 1910.94 NFPA 91-1999

NFPA No. 33-1969 Div 2/G - 1910.94 2000

ANSI/AIHA Z9.2-1960 Div 2/G - 1910.94 2001

ANSI S1.4-1971 (R1976) Div 2/G - 1910.95 1983 (R2001)

ANSI Z48.1-1954, "Marking Portable Compressed

Gas Containers to Identify the Material Contained" Div 2/H - 1910.103 2000 Now CGA C7-2000

ANSI/ASME Boiler and Pressure Vessel Code, Building Codes have

Section VIII Unfired Pressure Vessels, 1968 Div 2/H - 1910.103 2001 these

ANSI/ASME B31.1-1967, "Industrial Gas and Air

Piping" Div 2/H - 1910.103 1998

ANSI/ASME B31.3-1966 Div 2/H - 1910.103 1999

NFPA 33-1989 Div 2/H - 1910.107 2000

 Now - National
Electrical Safety
ANSI/IEEE C2-1990 Div 2/H - 1910.107 2002 Code

ANSI A14.5-1992 Div 2/D - 437-002-0026 2000

ANSI A14.1-1994 Div 2/D - 437-002-0026 2000

ANSI/ASME A39.1-1987 Div 2/D - 1910.30 1995

ANSI/IES RP7-1990, "Industrial Lighting" Div 2/J - 437-002-0144 2001

Cancelled/Not
ANSI A10.2-1944 Div 2/J - 1910.144 1944 superseeded

Not found anymore

ASAE R276, 1967 Div 2/J - 1910.144 on ASAE

ASAE S276.5 Div 2/J - 1910.144 1998

ANSI Z87.1-1968 Div 2/L - 437-002-0182 1989(R1998)

ANSI/CGA Standard G7.1-1989 Div 2/L - 437-002-0182 1997

ANSI/ASME B20.1-1957, "Safety Code for

Conveyors, Cableways, and Related Equipment" Div 2/N - 437-002-0221 2000

ANSI/ALI B153.1-1990, "Automotive Lifts - Now ANSI/ALI

Construction, Testing and Validation" Div 2/N - 437-002-0221 1998 ALCTV-1998

ANSI D6.1e-1989 - (MUTCD) Div 2/N - 437-002-0223 1989 Latest on order

ANSI/ASME B56.1-1969, "Powered Industrial

Trucks" Div 2/N - 1910.178 2000

ANSI/ASME B30.9-1971, "Safety Code for Slings" Div 2/N - 1910.179 1996

ANSI/ASME B30.2.0-1967 Div 2/N - 1910.179 1996

ANSI/ASME A14.3-1956 Div 2/N - 1910.179 1992

ANSI/ASME B30.5-1968, "Crawler, Locomotive, and

Truck Cranes" Div 2/N - 1910.180 2000

ANSI/ASME B30.6-1969, "Derricks" Div 2/N - 1910.180 1995

ASTM 391/A391M-1998 Div 2/N - 1910.184 1998

ANSI/ASME B7.1-1970, "Use, Care, and Protection

of Abrasive Wheels" Div 2/O - 1910.215 2000

ANSI/ASME B31.1.0-1967 Div 2/O - 1910.215 1998

ANSI/ASME B20.1-1957 Div 2/O - 1910.215 2000

ANSI B7.1-1970 Div 2/O - 1910.215 2000

ANSI/IES RP7-1991 Div 2/O - 1910.215 2001

ANSI B175.1-1985 Div 2/P - 1910.243 2000

ANSI A10.3-1970, "Explosive-Actuated Fastening
Tools" Div 2/P - 1910.243 1995

ANSI B71.1-X1968, "Power Lawnmowers: Div 2/P - 1910.243 1998

ANSI Z87.1-1968, "Education Eye and Face

Protection" Div 2/Q - 1910.252 1989(R1998)

ANSI/AWS Z49.1-1967, "Safety in Welding and

Cutting" Div 2/Q - 1910.252 1999

ANSI Z54.1-1963, "Non-Medical X-ray and Sealed

Gamma-Ray Sources" Withdrawn Now NBS
HDBK 114-1975.
Could also be part of
N43.3-1993 for
Div 2/Q - 1910.252 1993 installation.

ANSI Z48.1-1954, "Method for Marking Portable

Compressed Gas Containers to Identify the Material
Contained" Div 2/Q - 1910.253 2000 Now CGA 7-2000

ANSI B57.1-1965, "Compressed Gas Cylinder Valve

Outlet and Inlet Connections" Div 2/Q - 1910.253 2000 Now CGA V1-2000

ANSI B31.1-1967, "Pressure Piping" Div 2/Q - 1910.253 1998

Now ASTM B88-

ASTM B88-66a Div 2/Q - 1910.253 1999 99e1

ANSI A13.1-1956, "Scheme for the Identification of

Piping Systems" Div 2/Q - 1910.253 1996

NEMA EW-1-1962, "Requirements for Electric Arc-

Welding Apparatus" Div 2/Q - 1910.254 1988(R1999)

ANSI C33.2-1956, "Transformer-Type Arc-Welding

Machines" Div 2/Q - 1910.254 1994(R1999) Now UL 551-1994

ANSI A10.14-1975 Div 2/R - 437-002-0307 1991

ANSI B175.1-1985 Div 2/R - 437-002-0308 2000

ANSI/ASME B30.9-1984 Div 2/R - 437-002-0309 1996

ANSI/ASME B30.9a-1985 Div 2/R - 437-002-0309 1997

ANSI/ASME B30.9b-1987 Div 2/R - 437-002-0309 1998

ANSI A14.1-1982, "Safety Requirements for

Portable Wood Ladders, or nonconductive" Div 2/R - 437-002-0309 2000

ANSI A14.2-1982, "Safety Requirements for

Portable Metal Ladders" Div 2/R - 437-002-0309 2000

ANSI A13.1-1981(R1993), "Scheme for the

Identification of Piping Systems" Div 2/R - 437-002-0312 1996

ANSI A14.1-1990, "Safety Code for Portable Wood

Ladders" Div 2/R - 437-002-0312 2000
ANSI A14.2-1990, "Safety Code for Portable Metal
Ladders" Div 2/R - 437-002-0312 2000

ANSI A14.3-1990, "Safety Code for Fixed Ladders" Div 2/R - 437-002-0312 1992

ANSI/ASME B30.2-1990, "Safety Code for Cranes,

Derricks, and Hoists" Div 2/R - 437-002-0312 1996

ANSI/ASME B30.17-1992, "Overhead and Gantry

Cranes" Div 2/R - 437-002-0312 1998

ANSI/ASME B30.8-1993, "Crawler, Locomotive, and

Truck Cranes" Div 2/R - 437-002-0312 1999

ANSI 01.1-1992, "Safety Code for Woodworking

Machinery" Div 2/R - 437-002-0312

ANSI S3.19-1974(R1990), "Method of Measurement

of Real-Ear Protection of Hearing Protectors - Now ANSI S12.6-
Physical Attenuation of Ear Muffs" Div 2/R - 437-002-0312 1997 1997

ANSI Z87.1-1989, "Practice for Occupational and

Educational Eye and Face Protection" Div 2/R - 437-002-0312 (R1998)

ANSI Z4.1-1986, "Requirements for Sanitation in

Places of Employment" Div 2/R - 437-002-0312 (R1995)

ANSI/AIHA Z9.2-1979(R1991), "Fundamentals

Governing the Design and Operation of Local
Exhaust Systems" Div 2/R - 437-002-0312 2001

ANSI Z88.2-1992, "Practices for Respiratory

Protection" Div 2/R - 437-002-0312 No change

ANSI Z89.1-1986, "Safety Requirements for

Industrial Head Protection" Div 2/R - 437-002-0312 1997

ANSI Z535.1-1991, "Safety Color Code" Div 2/R - 437-002-0312 1998

ANSI/ASME A17.2-1988, "Practice for the Inspection

of Elevators (Inspector's Manual)" Div 2/R - 437-002-0312 2002

ANSI/ASME A17.1-1990, "Safety Code for

Elevators, Dumbwaiters, and Moving Walks" Div 2/R - 437-002-0312 2000

ANSI/ASME B15.1-1992, "Safety Code for

Mechanical Power-Transmission Apparatus" Div 2/R - 437-002-0312 2000

ANSI/ASME B20.1-1993, "Safety Code for

Conveyors, Cableways, and Related Equipment" Div 2/R - 437-002-0312 2000

ANSI/ASME B31.1-1992, "Power Piping" Div 2/R - 437-002-0312 1998

ANSI/ASME B56.1, "Safety Code for Powered

Industrial Trucks" Div 2/R - 437-002-0312 1993

ANSI/IES RP-990, "Practice for Industrial Lighting" Div 2/R - 437-002-0312 2001 Now RP7-01
ANSI/NFPA 91-1992, "Installation of Blower and
Exhaust Systems for Dust, Stock, and Vapor
Removal or Conveying" Div 2/R - 437-002-0312 1999

ANSI/NFPA 1404-1989, "Fire Department Self-

Contained Breathing Apparatus Program" Div 2/R - 437-002-0312 1996

ANSI/UL 641-1985, "Safety Code for Ventilation and Low Temp Venting
Operation of Open-Surface Tanks" Div 2/R - 437-002-0312 1994 Systems ANSI/Z9.1

NFPA 101-1991, "Building Exits Code for Life Safety

from Fire" Div 2/R - 437-002-0312 2000

NFPA 655-1993, "Prevention of Sulfur Fires and

Explosions" Div 2/R - 437-002-0312 2001

Safety in the Transportation, Storage, Handling and

Use of Explosives, IME Pamphlet No. 17, March
1987, Institute of Makers of Explosives Div 2/R - 437-002-0312 1996

ANSI/IES-RP-1990 Div 2/R - 437-002-0312 2001 Now RP7-01

ANSI/ASME B20.1-1993 Div 2/R - 437-002-0312 2000

ANSI Z535.1 Div 2/R - 437-002-0312 1998

ANSI/ASME B15.1-1992 Div 2/R - 437-002-0312 2000

ANSI 01.1-1992 Div 2/R - 437-002-0312 No Change

ANSI/ASME B15.1-1992 Div 2/R - 437-002-0312 2000

ANSI/NFPA 91-1992 Div 2/R - 437-002-0312 1999

ANSI/AIHA Z9.2-1979 (R1991) Div 2/R - 437-002-0312 2001

ANSI/ASME B31.1-1992 Div 2/R - 437-002-0312 1998

ANSI/UL 641-1985 Div 2/R - 437-002-0312 1994

ANSI/NFPA 1404-1989 Div 2/R - 437-002-0312 1996

ANSI Z88.2-1980 Div 2/R - 437-002-0312 1992

ANSI 01.1-1992 Div 2/R - 437-002-0312 No Change

ANSI/IES RP-1990 Div 2/R - 437-002-0312 2001 Now RP7-01

ANSI/ASME A17.1-1990 Div 2/R - 437-002-0312 2000

ANSI D6.1e-1989, "Manual on Uniform Traffic

Control Devices for Streets and Highways" Div 2/R - 1910.268 No Change

ANSI Z89.2-1971, "Safety Requirements for

Industrial Protective Helmets for Electrical Workers, Now Part of Z89.1-
Class B" Div 2/R - 1910.268 1997

ANSI/ASME B30.6-1969, "Safety Code for Derricks" Div 2/R - 1910.268 1995

ANSI/SIA A92.2-1969 Div 2/R - 1910.268 2002

ANSI/IEEE C2-1987 Div 2/R - 1910.269 2002

Now ANSI/IEEE 4-
ANSI/IEEE Standard No.4, March 1943 Div 2/R - 1910.269 1995 1995

ANSI/IEEE 516-1987, "IEEE Guide for Maintenance

Methods on Energized Power Lines" Div 2/R - 1910.269 1995

ANSI/SIA A92.2-1990, "Vehicle-Mounted Elevating

and Rotating Aerial Devices" Div 2/R - 1910.269 2002

ANSI C2-1993 Div 2/R - 1910.269 2002

ANSI Z133.1-1988, "Pruning, Trimming, Repairing,

Maintaining, and Removing Trees, and for Cutting
Brush" Div 2/R - 1910.269 2001

ANSI/ASME B20.1-1990 Div 2/R - 1910.269 2000

ANSI/IEEE 4-1978 Div 2/R - 1910.269 1995

ANSI/IEEE 100-1988 Div 2/R - 1910.269 2000

ANSI/IEEE 516-1987 Div 2/R - 1910.269 1995

ANSI/IEEE 935-1989 Div 2/R - 1910.269 (R1995)

ANSI/IEEE 957-1987 Div 2/R - 1910.269 1995

ANSI/IEEE 978-1984 Div 2/R - 1910.269 (R1990)

ANSI/NFPA 61B, "Grain elevators and facilities Now NFPA 61 drop

handling bulk raw agricultural commodities" Div 2/R - 1910.272 1999 "B", "C", & "D"

ANSI/NFPA 61C, "Feed mills" Div 2/R - 1910.272 1999

ANSI/NFPA 61, "Facilities handling agricultural

commodities for human consumption" Div 2/R - 1910.272 1999 Just NFPA 61-1999

ANSI/NFPA 66, "Pneumatic conveying systems for Now NFPA 654-

agricultural commodities" Div 2/R - 1910.272 2000 2000

ANSI/NFPA 68, "Guide for explosion venting" Div 2/R - 1910.272 1998

ANSI/NFPA 69, "Explosion prevention systems" Div 2/R - 1910.272 1997

ANSI/NFPA 91, "Dust removal and exhaust

systems" Div 2/R - 1910.272 1999

ANSI/ASME A17.1-71, "Safety Code for Elevators,

Dumbwaiters, Escalators and Moving Walks" Div 2/R - 1910.272 2000

ANSI B9.1-71, "Safety Code for Mechanical Now ANSI/ASHRAE

Refrigeration" Div 2/R - 1910.272 1994 15-1994

ANSI/ASME B30.2-76, "Safety Code for Overhead

and Gantry Cranes" Div 2/R - 1910.272 1996
ANSI/ASME B30.3-75, "Hammerhead Tower
Cranes" Div 2/R - 1910.272 1996

ANSI/ASME B30.4-73, "Safety Code for Portal,

Tower, and Pillar Cranes" Div 2/R - 1910.272 1996

ANSI/ASME B30.5-68, "Safety Code for Crawler,

Locomotive, and Truck Cranes" Div 2/R - 1910.272 1995(R2000)

ANSI/ASME B30.6-77, "Derricks" Div 2/R - 1910.272 1995

ANSI/ASME B30.7-77, "Base Mounted Drum Hoists" Div 2/R - 1910.272 1995

ANSIASME B30.8-71, "Safety Code for Floating

Cranes and Floating Derricks" Div 2/R - 1910.272 1993

ANSI/ASME B30.11-73, "Monorail Systems and

Underhung Cranes" Div 2/R - 1910.272 1998

ANSI/ASME B30.12-75, "Handling Loads

Suspended from Rotorcraft" Div 2/R - 1910.272 1992

ANSI/ASME B30.13-77, "Controlled Mechanical

Storage Cranes" Div 2/R - 1910.272 1996

ANSI/ASME B30.15-73, "Safety Code for Mobile

Hydraulic Cranes" Div 2/R - 1910.272 Now in B30.5-2000

ANSI/ASME B30.16-73, "Overhead Hoists" Div 2/R - 1910.272 1998

ANSI/IEEE C2-81, "National Electrical Safety Code" Div 2/R - 1910.272 2002

ANSI C33.27-74, "Safety Standard for Outlet Boxes

and Fittings for Use in Hazardous Locations" Div 2/R - 1910.272 Now UL 886-1994

ANSI K61.1-72, "Safety Requirements for the

Storage and Handling of Anhydrous Ammonia" Div 2/R - 1910.272 1999 AKA: CGA G2.1

ASTM D2155-66, "Test Method for Autoignition Now in ASTM E659-

Temperature of Liquid Petroleum Products" Div 2/R - 1910.272 2000

ASTM D3176-74, "Method for Ultimate Analysis of

Coal and Coke" Div 2/R - 1910.272 1989(R1997)

ASTM D3180-74, "Method for Calculating Coal and

Coke Analyses from as determined to different
bases" Div 2/R - 1910.272 1989(R1997)

ANSI Z308.11978, "Minimum Requirements for

Industrial Unit-Type First aid Kits" Div 3/D - 1926.50 1998

ANSI/AIHA Z9.2-1960 Div 3/D - 1926.57 2001

NFPA No 33-1969 Div 3/D - 1926.57 2000

ANSI Z129.1-1982 Div 3/D - 1926.59 2000

CGA G-7.1-1989, "Compressed Gas Association
Commodity Specification for Air" Div 3/E - 1926.103 1997

ANSI Z33.1-1961 Div 3/G - 1926.200 Now NFPA 91-1999

Now ANSI Z535.1-

1998 Safety Color
ANSI Z53.1-1967 Div 3/G - 1926.200 Code

ANSI D6.1e-1989 Div 3/G - 1926.200 Current

ANSI D6.1-1971 Div 3/G - 1926.200 Current

ANSI Z35.1-1968, "Environmental and Facility Safety

Signs" Div 3/G - 1926.200 1998 Now Z535.2-1998

ANSI Z35.2-1968, "Criteria for Safety Signs" Div 3/G - 1926.200 1998 Now Z535.3-1998

ANSI A10.3-1985 Div 3/I - 1926.302 1995

ANSI/NFPA 70-1984 Div 3/K - 1926.402 2002

ANSI/SIA A92.5 Div 3/L - 1926.452 1995

ANSI/SIA A92.6 Div 3/L - 1926.453 1999

ANSI/SIA A92.2-1969 Div 3/L - 1926.453 2002

ANSI/SIA A92.3-1990 Div 3/L - 437-003-0071 1993

ANSI/SIA A92.5-1992 Div 3/L - 437-003-0071 1995

ANSI/SIA A92.6-1990 Div 3/L - 437-003-0074 1999

ANSI A10.8-1988 Div 3/L - 437-003-0074 2001

SAE J743a-1964 Div 3/N - 1926.550 Cancelled in 2000,

Replaced by JISO
8813-2000

ANSI/ASME B30.5-1968 Div 3/N - 1926.550 1994(R2000)

ANSI/ASME B30.2.0-1967 Div 3/N - 1926.550 1996

ANSI A10.5-1969 Div 3/N - 1926.552 1992

ANSI/ASME B20.1-1957 Div 3/N - 1926.552 2000

ANSI Z89.2-1971 Div 3/V - 1926.951 Now Part of 89.1

ANSI A14.1-1982 Div 3/X - 1926.1053 2000

ANSI A14.3-1984 Div 3/X - 1926.1053 1992

ANSI A14.4-1979 Div 3/X - 1926.1053 1992

ANSI A14.5-1982 Div 3/X - 1926.1053 2000

ANSI Z89.1-1986 Div 6 - 437-006-0045 1997

ANSI Z88.2-1980 Div 6 - 437-006-0045 1992

ANSI B175.1-1985 Div 6 - 437-006-0065 2000

ANSI/AIHA Z9.2-1979 Div 2&3/Z - 1910.1001 2001

ANSI Z129.1-1982 Div 2&3/Z - 1910.1200 2000

ANSI/AIHA Z9.2-1979 Div 2&3/Z - 1910.1450 2001

ANSI A10.9-1983 Div 3/Q - 1926.703(a)(1) 1997

Accident Prevention Manual for Business and

Industry Div 3/Q - 1926.703(a)(1) 12th Edition, 2001

ACI 318-83, "Building Code Requirement for

Reinforced Concrete" Div 3/Q - 1926.703(a)(1) 1999

ACI SP-4, "Formwork for Concrete" Div 3/Q - 1926.703(a)(1) 1995

ACI 347-78, "Recommended Practice for Concrete Now ACI Z347R-

Formwork" Div 3/Q - 1926.703(a)(1) 2001

ANSI A10.9-1983, "Safety Requirements for

Concrete and Masonry Work" Div 3/Q - 1926.703(a)(1) 1997

ASTM C39-86, "Standard Test Method for

Compressive Strength of Cylindrical Concrete
Specimens" Div 3/Q - 1926.703(a)(1) 2001

ASTM C31-85, "Standard Test Method for Making

and Curing Concrete Test Specimens in the Field" Div 3/Q - 1926.703(a)(1) 2001

ASTM C918-80, "Standard Method for Developing

Early Age Compressive Test Values and Projecting
Later Age Strengths" Div 3/Q - 1926.703(a)(1) 1997

ASTM E329-77, "Recommended Practice for

Inspection and Testing Agencies for Concrete, Steel
and Bituminous engaged in the Testing and/or
Inspection of Materials as Used in Construction" Div 3/Q - 1926.703(a)(1) 2001

ASTM C192-88, "Method of Making and Curing

Concrete Test Specimens in the Laboratory" Div 3/Q - 1926.703(a)(1) 2000

ASTM C42-87, "Methods of Obtaining and Testing

Drilled Cores and Saws Beams of Concrete" Div 3/Q - 1926.703(a)(1) 1999

ASTM C513-86, "Methods of Securing, Preparing

and Testing Specimens from Hardened Lightweight
Insulating Concrete for Compressive Strength" Div 3/Q - 1926.703(a)(1) 1995

ASTM C495-86, "Test Method for Comprehensive of

Lightweight Insulating Concrete" Div 3/Q - 1926.703(a)(1) 1996

ASTM C803-82, "Standard Test Method for

Penetration Resistance of Hardened Concrete" Div 3/Q - 1926.703(a)(1) 1997
ASTM C873-85, "Standard Test Method for
Compressive Strength of Concrete Cylinders Cast In-
Place in Cylindrical Molds" Div 3/Q - 1926.703(a)(1) 1999

ASTM C684-81, "Method of Making, Accelerating

Curing, and Testing of Concrete Compression Test
Specimens" Div 3/Q - 1926.703(a)(1) 1999

ASTM C116-68 (1980), "Test Method for Discontinued in

Compressive Strength of Concrete Using Portions of 1999, no
Beams Broken in Flexure" Div 3/Q - 1926.703(a)(1) replacement