CS6711 SECURITY LABORATORY

ANNA UNIVERSITY CHENNAI

REGULATION-2013
CS6711 SECURITY LABORATORY
OBJECTIVES:
The student should be made to:

Learn to implement the algorithms DES, RSA,MD5,SHA-1

Learn to use network security tools like GnuPG, KF sensor, Net Strumbler

LIST OF EXPERIMENTS:

1. Implement the following SUBSTITUTION & TRANSPOSITION TECHNIQUES

concepts:
a) Caesar Cipher
b) Playfair Cipher
c) Hill Cipher
d) Vigenere Cipher
e) Rail fence – row & Column Transformation
2. Implement the following algorithms
a) DES
b) RSA Algorithm
c) Diffiee-Hellman
d) MD5
e) SHA-1
3. Implement the Signature Scheme - Digital Signature Standard
4. Demonstrate how to provide secure data storage, secure data transmission and for
creating digital signatures (GnuPG)
5. Setup a honey pot and monitor the honeypot on network (KF Sensor)
6. Installation of rootkits and study about the variety of options
7. Perform wireless audit on an access point or a router and decrypt WEP and WPA.
( Net Stumbler)
8. Demonstrate intrusion detection system (ids) using any tool (snort or any other s/w)

TOTAL: 45 PERIODS

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 2

CS6711 SECURITY LABORATORY

OUTCOMES:
At the end of the course, the student should be able to:

Implement the cipher techniques

Develop the various security algorithms

Use different open source tools for network security and analysis

LIST OF HARDWARE REQUIREMENTS & SOFTWARE REQUIREMENTS

SOFTWARE REQUIREMENTS

C

C++

Java or equivalent compiler GnuPG

KF Sensor or Equivalent

Snort

Net Stumbler or Equivalent

HARDWARE REQUIREMENTS

Standalone desktops (or) Server supporting 30 terminals or more

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 3

CS6711 SECURITY LABORATORY

INDEX

S.No. Name of the Program Page No. Staff Signature Remarks

1(A) Caesar Cipher

1(B) Playfair Cipher

1(C) Hill Cipher

1(D) Vigenere Cipher

1(E) Rail fence – row & Column

Transformation

2(A) Data Encryption Standard(DES)

2(B) RSA Algorithm

2(C) Diffiee-Hellman Algorithm

2(D) MD5

2(E) SHA-1

3 Implement the Signature Scheme

for Digital Signature Standard

4 Demonstrate how to provide secure

data storage, secure data
transmission and for
creating digital signatures (GnuPG)

5 Setup a honey pot and monitor the

honeypot on network (KF Sensor)

6 Installation of rootkits and study

about the variety of options

7 Perform wireless audit on an access

point or a router and decrypt WEP
and WPA
( Net Stumbler)

8 Demonstrate intrusion detection

system (ids) using any tool
(snort or any other s/w)

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 4

CS6711 SECURITY LABORATORY

EX. NO: 1(A)

IMPLEMENTATION OF CAESAR CIPHER

AIM:

To implement the simple substitution technique named Caesar cipher using C language.

DESCRIPTION:

To encrypt a message with a Caesar cipher, each letter in the message is changed
using a simple rule: shift by three. Each letter is replaced by the letter three letters ahead in
the alphabet. A becomes D, B becomes E, and so on. For the last letters, we can think of the
alphabet as a circle and "wrap around". W becomes Z, X becomes A, Y becomes B, and Z
becomes C. To change a message back, each letter is replaced by the one three before it.

EXAMPLE:

ALGORITHM:

STEP-1: Read the plain text from the user.

STEP-2: Read the key value from the user.
STEP-3: If the key is positive then encrypt the text by adding the key with each
character in the plain text.
STEP-4: Else subtract the key from the plain text.
STEP-5: Display the cipher text obtained above.

PROGRAM: (Caesar Cipher)

ipher)

#include <stdio.h>
#include <string.h>
#include<conio.h>
#include <ctype.h>
void main()
CS6711 SECURITY LABORATORY

{
char plain[10], cipher[10];
int key,i,length;
int result;
clrscr();
printf("\n Enter the plain text:");
scanf("%s", plain);
printf("\n Enter the key value:");
scanf("%d", &key);
printf("\n \n \t PLAIN TEXt: %s",plain);
printf("\n \n \t ENCRYPTED TEXT: ");
for(i = 0, length = strlen(plain); i < length; i++)
{
cipher[i]=plain[i] + key;
if (isupper(plain[i]) && (cipher[i] > 'Z'))
cipher[i] = cipher[i] - 26;
if (islower(plain[i]) && (cipher[i] > 'z'))
cipher[i] = cipher[i] - 26;
printf("%c", cipher[i]);
}
printf("\n \n \t AFTER DECRYPTION : ");
for(i=0;i<length;i++)
{
plain[i]=cipher[i]-key;
if(isupper(cipher[i])&&(plain[i]<'A'))
plain[i]=plain[i]+26;
if(islower(cipher[i])&&(plain[i]<'a'))
plain[i]=plain[i]+26;
printf("%c",plain[i]);
}
getch();
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 6

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:

Thus the implementation of Caesar cipher had been executed successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 7

CS6711 SECURITY LABORATORY

EX. NO: 1(B)

IMPLEMENTATION OF PLAYFAIR CIPHER

AIM:

To write a C program to implement the Playfair Substitution technique.

DESCRIPTION:

The Playfair cipher starts with creating a key table. The key table is a 5×5 grid of
letters that will act as the key for encrypting your plaintext. Each of the 25 letters must be
unique and one letter of the alphabet is omitted from the table (as there are 25 spots and 26
letters in the alphabet).

To encrypt a message, one would break the message into digrams (groups of 2 letters)
such that, for example, "HelloWorld" becomes "HE LL OW OR LD", and map them out on
the key table. The two letters of the diagram are considered as the opposite corners of a
rectangle in the key table. Note the relative position of the corners of this rectangle. Then
apply the following 4 rules, in order, to each pair of letters in the plaintext:

1. If both letters are the same (or only one letter is left), add an "X" after the first letter
2. If the letters appear on the same row of your table, replace them with the letters to
their immediate right respectively
3. If the letters appear on the same column of your table, replace them with the letters
immediately below respectively
4. If the letters are not on the same row or column, replace them with the letters on the
same row respectively but at the other pair of corners of the rectangle defined by the
original pair.

EXAMPLE:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 8

CS6711 SECURITY LABORATORY

ALGORITHM:

STEP-1: Read the plain text from the user.

STEP-2: Read the keyword from the user.
STEP-3: Arrange the keyword without duplicates in a 5*5 matrix in the row order and
fill the remaining cells with missed out letters in alphabetical order. Note that
‘i’ and ‘j’ takes the same cell.
STEP-4: Group the plain text in pairs and match the corresponding corner letters by
forming a rectangular grid.
STEP-5: Display the obtained cipher text.

PROGRAM: (Playfair Cipher)

#include<stdio.h>
#include<conio.h>
#include<string.h>
#include<ctype.h>
#define MX 5
void playfair(char ch1,char ch2, char key[MX][MX])
{
int i,j,w,x,y,z;
FILE *out;
if((out=fopen("cipher.txt","a+"))==NULL)
{
printf("File Currupted.");
}
for(i=0;i<MX;i++)
{
for(j=0;j<MX;j++)
{
if(ch1==key[i][j])
{
w=i;
x=j;
}
else if(ch2==key[i][j])
{
y=i;
z=j;
}}}
//printf("%d%d %d%d",w,x,y,z);
if(w==y)
{
x=(x+1)%5;z=(z+1)%5;
printf("%c%c",key[w][x],key[y][z]);
fprintf(out, "%c%c",key[w][x],key[y][z]);
}
else if(x==z)
{

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 9

CS6711 SECURITY LABORATORY

w=(w+1)%5;y=(y+1)%5;
printf("%c%c",key[w][x],key[y][z]);
fprintf(out, "%c%c",key[w][x],key[y][z]);
}
else
{
printf("%c%c",key[w][z],key[y][x]);
fprintf(out, "%c%c",key[w][z],key[y][x]);
}
fclose(out);
}
void main()
{
int i,j,k=0,l,m=0,n;
char key[MX][MX],keyminus[25],keystr[10],str[25]={0};
char
alpa[26]={'A','B','C','D','E','F','G','H','I','J','K','L'
,'M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z'}
;
clrscr();
printf("\nEnter key:");
gets(keystr);
printf("\nEnter the plain text:");
gets(str);
n=strlen(keystr);
//convert the characters to uppertext
for (i=0; i<n; i++)
{
if(keystr[i]=='j')keystr[i]='i';
else if(keystr[i]=='J')keystr[i]='I';
keystr[i] = toupper(keystr[i]);
}
//convert all the characters of plaintext to uppertext
for (i=0; i<strlen(str); i++)
{
if(str[i]=='j')str[i]='i';
else if(str[i]=='J')str[i]='I';
str[i] = toupper(str[i]);
}
j=0;
for(i=0;i<26;i++)
{
for(k=0;k<n;k++)
{
if(keystr[k]==alpa[i])
break;
else if(alpa[i]=='J')
break;
}
if(k==n)
{
keyminus[j]=alpa[i];j++;
}
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 10

CS6711 SECURITY LABORATORY

//construct key keymatrix

k=0;
for(i=0;i<MX;i++)
{
for(j=0;j<MX;j++)
{
if(k<n)
{
key[i][j]=keystr[k];
k++;}
else
{
key[i][j]=keyminus[m];m++;
}
printf("%c ",key[i][j]);
}
printf("\n");
}
printf("\n\nEntered text :%s\nCipher Text :",str);
for(i=0;i<strlen(str);i++)
{
if(str[i]=='J')str[i]='I';
if(str[i+1]=='\0')
playfair(str[i],'X',key);
else
{
if(str[i+1]=='J')str[i+1]='I';
if(str[i]==str[i+1])
playfair(str[i],'X',key);
else
{
playfair(str[i],str[i+1],key);i++;
}}
}
getch();
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 11

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:
Thus the Playfair cipher substitution technique had been implemented successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 12

CS6711 SECURITY LABORATORY

EX. NO: 1(C)

IMPLEMENTATION OF HILL CIPHER
AIM:

To write a C program to implement the hill cipher substitution techniques.

DESCRIPTION:

Each letter is represented by a number modulo 26. Often the simple scheme A = 0, B
= 1... Z = 25, is used, but this is not an essential feature of the cipher. To encrypt a message,
each block of n letters is multiplied
ltiplied by an invertible n × n matrix, against modulus 26. To
decrypt the message,
sage, each block is multiplied by the inverse of the matrix used for
encryption. The matrix used for encryption is the cipher key,, and it should be chosen
randomly from the set of invertible n × n matrices (modulo 26).

EXAMPLE:

ALGORITHM:

STEP-1: Read the plain text and key from the user.
STEP-2: Split the plain text into groups of length three.
STEP-3: Arrange the keyword in a 3*3 matrix.
STEP-4: Multiply the two matrices to obtain the cipher text of length three.
STEP-5: Combine all these groups to get the complete cipher text.

PROGRAM: (Hill Cipher)

#include<stdio.h>
#include<conio.h>
#include<string.h>
int main(){
unsigned int a[3][3]={{6,24,1},{13,16,10},{20,17,15}};
unsigned int b[3][3]={{8,5,10},{21,8,21},{21,12,8}};
int i,j, t=0;
unsigned int c[20],d[20];
char msg[20];
clrscr();
printf("Enter plain text
text\n ");
scanf("%s",msg);
for(i=0;i<strlen(msg);i++)
{ c[i]=msg[i]-65;
65;
CS6711 SECURITY LABORATORY

printf("%d ",c[i]);
}
for(i=0;i<3;i++)
{ t=0;
for(j=0;j<3;j++)
{
t=t+(a[i][j]*c[j]);
}
d[i]=t%26;
}
printf("\nEncrypted Cipher Text :");
for(i=0;i<3;i++)
printf(" %c",d[i]+65);
for(i=0;i<3;i++)
{
t=0;
for(j=0;j<3;j++)
{
t=t+(b[i][j]*d[j]);
}
c[i]=t%26;
}
printf("\nDecrypted Cipher Text :");
for(i=0;i<3;i++)
printf(" %c",c[i]+65);
getch();
return 0;
}

OUTPUT:

RESULT:

Thus the hill cipher substitution technique had been implemented successfully in C.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 14

CS6711 SECURITY LABORATORY

EX. NO: 1(D)

IMPLEMENTATION OF VIGENERE CIPHER
AIM:

To implement the Vigenere Cipher

Cipher substitution technique using C program.

DESCRIPTION:

To encrypt, a table of alphabets can be used, termed a tabula recta, Vigenère square,
or Vigenère table. It consists of the alphabet written out 26 times in different rows, each
alphabet shifted cyclically to the left compared to the prev
previous
ious alphabet, corresponding to the
26 possible Caesar ciphers. At different points in the encryption process, the cipher uses a
different alphabet from one of the rows. The alphabet used at each point depends on a
repeating keyword.

Each row starts with a key letter. The remainder of the row holds the letters A to Z.
Although there are 26 key rows shown, you will only use as many keys as there are unique
letters in the key string, here just 5 keys, {L, E, M, O, N}. For successive letters of the
message, we are going to take successive letters of the key string, and encipher each message
letter using its corresponding key row. Choose the next letter of the key, go along that row to
find the column heading that matches the message character; the letter at the intersection of
[key-row, msg-col]
col] is the enciphered letter.

EXAMPLE:
CS6711 SECURITY LABORATORY

ALGORITHM:

STEP-1: Arrange the alphabets in row and column of a 26*26 matrix.

STEP-2: Circulate the alphabets in each row to position left such that the first letter is
attached to last.
STEP-3: Repeat this process for all 26 rows and construct the final key matrix.
STEP-4: The keyword and the plain text is read from the user.
STEP-5: The characters in the keyword are repeated sequentially so as to match with
that of the plain text.
STEP-6: Pick the first letter of the plain text and that of the keyword as the row indices
and column indices respectively.
STEP-7: The junction character where these two meet forms the cipher character.
STEP-8: Repeat the above steps to generate the entire cipher text.

PROGRAM: (Vigenere Cipher)

#include <stdio.h>
#include<conio.h>
#include <ctype.h>
#include <string.h>
void encipher();
void decipher();
void main()
{
int choice;
clrscr();
while(1)
{
printf("\n1. Encrypt Text");
printf("\t2. Decrypt Text");
printf("\t3. Exit");
printf("\n\nEnter Your Choice : ");
scanf("%d",&choice);
if(choice == 3)
exit(0);
else if(choice == 1)
encipher();
else if(choice == 2)
decipher();
else
printf("Please Enter Valid Option.");
}
}
void encipher()
{
unsigned int i,j;
char input[50],key[10];
printf("\n\nEnter Plain Text: ");

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 16

CS6711 SECURITY LABORATORY

scanf("%s",input);
printf("\nEnter Key Value: ");
scanf("%s",key);
printf("\nResultant Cipher Text: ");
for(i=0,j=0;i<strlen(input);i++,j++)
{
if(j>=strlen(key))
{ j=0;
}
printf("%c",65+(((toupper(input[i])-65)+(toupper(key[j])-
65))%26));
}}
void decipher()
{
unsigned int i,j;
char input[50],key[10];
int value;
printf("\n\nEnter Cipher Text: ");
scanf("%s",input);
printf("\n\nEnter the key value: ");
scanf("%s",key);
for(i=0,j=0;i<strlen(input);i++,j++)
{
if(j>=strlen(key))
{ j=0; }
value = (toupper(input[i])-64)-(toupper(key[j])-64);
if( value < 0)
{ value = value * -1;
}
printf("%c",65 + (value % 26));
}}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 17

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:

Thus the Vigenere Cipher substitution technique had been implemented successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 18

CS6711 SECURITY LABORATORY

EX. NO: 1(E)

IMPLEMENTATION OF RAIL FENCE – ROW & COLUMN

TRANSFORMATION TECHNIQUE

AIM:

To write a C program to implement the rail fence transposition technique.

DESCRIPTION:

In the rail fence cipher, the plain text is written downwards and diagonally on
successive "rails" of an imaginary fence, then moving up when we reach the bottom rail.
When we reach the top rail, the message is written downwards again until the whole plaintext
is written out. The message is then read off in rows.

EXAMPLE:

ALGORITHM:

STEP-1: Read the Plain text.

STEP-2: Arrange the plain text in row columnar matrix format.
STEP-3: Now read the keyword depending on the number of columns of the plain text.
STEP-4: Arrange the characters of the keyword in sorted order and the corresponding
columns of the plain text.
STEP-5: Read the characters row wise or column wise in the former order to get the
cipher text.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 19

CS6711 SECURITY LABORATORY

PROGRAM: (Rail Fence)

#include<stdio.h>
#include<conio.h>
#include<string.h>
void main()
{
int i,j,k,l;
char a[20],c[20],d[20];
clrscr();
printf("\n\t\t RAIL FENCE TECHNIQUE");
printf("\n\nEnter the input string : ");
gets(a);
l=strlen(a);

/*Ciphering*/
for(i=0,j=0;i<l;i++)
{
if(i%2==0)
c[j++]=a[i];
}
for(i=0;i<l;i++)
{
if(i%2==1)
c[j++]=a[i];
}
c[j]='\0';
printf("\nCipher text after applying rail fence :");
printf("\n%s",c);

/*Deciphering*/
if(l%2==0)
k=l/2;
else
k=(l/2)+1;
for(i=0,j=0;i<k;i++)
{
d[j]=c[i];
j=j+2;
}
for(i=k,j=1;i<l;i++)
{
d[j]=c[i];
j=j+2;
}
d[l]='\0';
printf("\nText after decryption : ");
printf("%s",d);
getch();
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 20

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:

Thus the rail fence algorithm had been executed successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 21

CS6711 SECURITY LABORATORY

EX. NO: 2(A) IMPLEMENTATION OF DES

AIM:

To write a C program to implement Data Encryption Standard (DES) using C

Language.

DESCRIPTION:

DES is a symmetric encryption system that uses 64-bit blocks, 8 bits of which are
used for parity checks. The key therefore has a "useful" length of 56 bits, which means that
only 56 bits are actually used in the algorithm. The algorithm involves carrying out
combinations, substitutions and permutations between the text to be encrypted and the key,
while making sure the operations can be performed in both directions. The key is ciphered on
64 bits and made of 16 blocks of 4 bits, generally denoted k1 to k16. Given that "only" 56 bits
are actually used for encrypting, there can be 256 different keys.

The main parts of the algorithm are as follows:

Fractioning of the text into 64-bit blocks

Initial permutation of blocks

Breakdown of the blocks into two parts: left and right, named L and R

Permutation and substitution steps repeated 16 times

Re-joining of the left and right parts then inverse initial permutation

EXAMPLE:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 22

CS6711 SECURITY LABORATORY

ALGORITHM:

STEP-1: Read the 64-bit plain text.

STEP-2: Split it into two 32-bit blocks and store it in two different arrays.
STEP-3: Perform XOR operation between these two arrays.
STEP-4: The output obtained is stored as the second 32-bit sequence and the original
second 32-bit sequence forms the first part.
STEP-5: Thus the encrypted 64-bit cipher text is obtained in this way. Repeat the same
process for the remaining plain text characters.

PROGRAM:

DES.java

import javax.swing.*;
import java.security.SecureRandom;
import javax.crypto.Cipher;
import javax.crypto.KeyGenerator;
import javax.crypto.SecretKey;
import javax.crypto.spec.SecretKeySpec;
import java.util.Random ;
class DES {
byte[] skey = new byte[1000];
String skeyString;
static byte[] raw;
String inputMessage,encryptedData,decryptedMessage;
public DES()
{
try
{
generateSymmetricKey();
inputMessage=JOptionPane.showInputDialog(null,"Enter
message to encrypt");
byte[] ibyte = inputMessage.getBytes();
byte[] ebyte=encrypt(raw, ibyte);
String encryptedData = new String(ebyte);
System.out.println("Encrypted message "+encryptedData);
JOptionPane.showMessageDialog(null,"Encrypted Data
"+"\n"+encryptedData);
byte[] dbyte= decrypt(raw,ebyte);
String decryptedMessage = new String(dbyte);
System.out.println("Decrypted message
"+decryptedMessage);
JOptionPane.showMessageDialog(null,"Decrypted Data
"+"\n"+decryptedMessage);
}
catch(Exception e)
{
System.out.println(e);
}
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 23

CS6711 SECURITY LABORATORY

void generateSymmetricKey() {
try {
Random r = new Random();
int num = r.nextInt(10000);
String knum = String.valueOf(num);
byte[] knumb = knum.getBytes();
skey=getRawKey(knumb);
skeyString = new String(skey);
System.out.println("DES Symmetric key = "+skeyString);
}
catch(Exception e)
{
System.out.println(e);
}
}
private static byte[] getRawKey(byte[] seed) throws Exception
{
KeyGenerator kgen = KeyGenerator.getInstance("DES");
SecureRandom sr = SecureRandom.getInstance("SHA1PRNG");
sr.setSeed(seed);
kgen.init(56, sr);
SecretKey skey = kgen.generateKey();
raw = skey.getEncoded();
return raw;
}
private static byte[] encrypt(byte[] raw, byte[] clear) throws
Exception {
SecretKeySpec skeySpec = new SecretKeySpec(raw,
"DES");
Cipher cipher = Cipher.getInstance("DES");
cipher.init(Cipher.ENCRYPT_MODE, skeySpec);
byte[] encrypted = cipher.doFinal(clear);
return encrypted;
}
private static byte[] decrypt(byte[] raw, byte[] encrypted)
throws Exception
{
SecretKeySpec skeySpec = new SecretKeySpec(raw,
"DES");
Cipher cipher = Cipher.getInstance("DES");
cipher.init(Cipher.DECRYPT_MODE, skeySpec);
byte[] decrypted = cipher.doFinal(encrypted);
return decrypted;
}
public static void main(String args[]) {
DES des = new DES();
}
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 24

CS6711 SECURITY LABORATORY

OUTPUT:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 25

CS6711 SECURITY LABORATORY

RESULT:

Thus the data encryption standard algorithm had been implemented successfully
using C language.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 26

CS6711 SECURITY LABORATORY

EX. NO: 2(B) IMPLEMENTATION OF RSA

AIM:

To write a C program to implement the RSA encryption algorithm.

DESCRIPTION:

RSA is an algorithm used by modern computers to encrypt and decrypt messages. It

is an asymmetric cryptographic algorithm. Asymmetric means that there are two different
keys. This is also called public key cryptography, because one of them can be given to
everyone. A basic principle behind RSA is the observation that it is practical to find three
very large positive integers e, d and n such that with modular exponentiation for all
integer m:

(me)d = m (mod n)

The public key is represented by the integers n and e; and, the private key, by the
integer d. m represents the message. RSA involves a public key and a private key. The public
key can be known by everyone and is used for encrypting messages. The intention is that
messages encrypted with the public key can only be decrypted in a reasonable amount of
time using the private key.

EXAMPLE:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 27

CS6711 SECURITY LABORATORY

ALGORITHM:

STEP-1: Select two co-prime numbers as p and q.

STEP-2: Compute n as the product of p and q.
STEP-3: Compute (p-1)*(q-1) and store it in z.
STEP-4: Select a random prime number e that is less than that of z.
STEP-5: Compute the private key, d as e * mod-1(z).
STEP-6: The cipher text is computed as messagee * mod n.
STEP-7: Decryption is done as cipherdmod n.

PROGRAM: (RSA)

#include<stdio.h>
#include<conio.h>
#include<stdlib.h>
#include<math.h>
#include<string.h>
long int
p,q,n,t,flag,e[100],d[100],temp[100],j,m[100],en[100],i;
char msg[100];
int prime(long int);
void ce();
long int cd(long int);
void encrypt();
void decrypt();
void main()
{
clrscr();
printf("\nENTER FIRST PRIME NUMBER\n");
scanf("%d",&p);
flag=prime(p);
if(flag==0)
{
printf("\nWRONG INPUT\n");
getch();
}
printf("\nENTER ANOTHER PRIME NUMBER\n");
scanf("%d",&q);
flag=prime(q);
if(flag==0||p==q)
{
printf("\nWRONG INPUT\n");
getch();
}
printf("\nENTER MESSAGE\n");
fflush(stdin);
scanf("%s",msg);
for(i=0;msg[i]!=NULL;i++)
m[i]=msg[i];
n=p*q;

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 28

CS6711 SECURITY LABORATORY

t=(p-1)*(q-1);
ce();
printf("\nPOSSIBLE VALUES OF e AND d ARE\n");
for(i=0;i<j-1;i++)
printf("\n%ld\t%ld",e[i],d[i]);
encrypt();
decrypt();
getch();
}
int prime(long int pr)
{
int i;
j=sqrt(pr);
for(i=2;i<=j;i++)
{
if(pr%i==0)
return 0;
}
return 1;
}
void ce()
{
int k;
k=0;
for(i=2;i<t;i++)
{
if(t%i==0)
continue;
flag=prime(i);
if(flag==1&&i!=p&&i!=q)
{
e[k]=i;
flag=cd(e[k]);
if(flag>0)
{
d[k]=flag;
k++;
}
if(k==99)
break;
} } }
long int cd(long int x)
{
long int k=1;
while(1)
{
k=k+t;
if(k%x==0)
return(k/x);
} }
void encrypt() {
long int pt,ct,key=e[0],k,len;
i=0;
len=strlen(msg);

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 29

CS6711 SECURITY LABORATORY

while(i!=len) {
pt=m[i];
pt=pt-96;
k=1;
for(j=0;j<key;j++)
{ k=k*pt;
k=k%n;
}
temp[i]=k;
ct=k+96;
en[i]=ct;
i++;
}
en[i]=-1;
printf("\nTHE ENCRYPTED MESSAGE IS\n");
for(i=0;en[i]!=-1;i++)
printf("%c",en[i]);
}
void decrypt()
{
long int pt,ct,key=d[0],k;
i=0;
while(en[i]!=-1)
{
ct=temp[i];
k=1;
for(j=0;j<key;j++)
{
k=k*ct;
k=k%n;
}
pt=k+96;
m[i]=pt;
i++;
}
m[i]=-1;
printf("\nTHE DECRYPTED MESSAGE IS\n");
for(i=0;m[i]!=-1;i++)
printf("%c",m[i]);
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 30

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:

Thus the C program to implement RSA encryption technique had been implemented
successfully

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 31

CS6711 SECURITY LABORATORY

EX. NO: 2(C)

IMPLEMENTATION OF DIFFIE HELLMAN KEY EXCHANGE

ALGORITHM
AIM:

To implement the Diffie-Hellman Key Exchange algorithm using C language.

DESCRIPTION:

Diffie–Hellman Key Exchange establishes a shared secret between two parties that
can be used for secret communication for exchanging data over a public network. It is
primarily used as a method of exchanging cryptography keys for use in symmetric encryption
algorithms like AES. The algorithm in itself is very simple. The process begins by having the
two parties, Alice and Bob. Let's assume that Alice wants to establish a shared secret with
Bob.

EXAMPLE:

ALGORITHM:

STEP-1: Both Alice and Bob shares the same public keys g and p.
STEP-2: Alice selects a random public key a.
STEP-3: Alice computes his secret key A as ga mod p.
STEP-4: Then Alice sends A to Bob.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 32

CS6711 SECURITY LABORATORY

STEP-5: Similarly Bob also selects a public key b and computes his secret key as B
and sends the same back to Alice.
STEP-6: Now both of them compute their common secret key as the other one’s secret
key power of a mod p.

PROGRAM: (Diffie Hellman Key Exchange)

#include<stdio.h>
#include<conio.h>
long long int power(int a, int b, int mod)
{
long long int t;
if(b==1)
return a;
t=power(a,b/2,mod);
if(b%2==0)
return (t*t)%mod;
else
return (((t*t)%mod)*a)%mod;
}
long int calculateKey(int a, int x, int n)
{
return power(a,x,n);
}
void main()
{
int n,g,x,a,y,b;
clrscr();
printf("Enter the value of n and g : ");
scanf("%d%d",&n,&g);
printf("Enter the value of x for the first person : ");
scanf("%d",&x);
a=power(g,x,n);
printf("Enter the value of y for the second person : ");
scanf("%d",&y);
b=power(g,y,n);
printf("key for the first person is :
%lld\n",power(b,x,n));
printf("key for the second person is :
%lld\n",power(a,y,n));
getch();
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 33

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:
Thus the Diffie-Hellman key exchange algorithm had been successfully implemented
using C.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 34

CS6711 SECURITY LABORATORY

EX. NO: 2(D)

IMPLEMENTATION OF MD5

AIM:

To write a C program to implement the MD5 hashing technique.

DESCRIPTION:

MD5 processes a variable

variable-length message into a fixed-length
length output of 128 bits. The
input message is broken upp into chunks of 512
512-bit blocks. The message is padded so that its
length is divisible by 512.
2. The padding works as follows: first a single bit, 1, is appended to
the end of the message. This is followed by as many zeros as are required to bring the length
of the message up to 64 bits less than a multiple of 512. The remaining bits are filled up with
64 bits representing the length of the original message, modulo 264.The main MD5 algorithm
operates on a 128-bit
bit state, divided into four 32-bit
32 words, denoted A, B, C,, and D. These are
initialized to certain fixed constants. The main algorithm then uuses
ses each 512-bit
512 message
block in turn to modify the state.

EXAMPLE:

ALGORITHM:

STEP-1: Read the 128-bit

bit plain text.
STEP-2: Divide into four blocks of 32
32-bits named as A, B, C and D.
CS6711 SECURITY LABORATORY

STEP-3: Compute the functions f, g, h and i with operations such as, rotations,
permutations, etc,.
STEP-4: The output of these functions are combined together as F and performed
circular shifting and then given to key round.
STEP-5: Finally, right shift of ‘s’ times are performed and the results are combined
together to produce the final output.

PROGRAM:( MD5)

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <math.h>
#include<conio.h>
typedef union uwb
{
unsigned w;
unsigned char b[4];
} MD5union;
typedef unsigned DigestArray[4];
unsigned func0( unsigned abcd[] ){
return ( abcd[1] & abcd[2]) | (~abcd[1] & abcd[3]);}
unsigned func1( unsigned abcd[] ){
return ( abcd[3] & abcd[1]) | (~abcd[3] & abcd[2]);}
unsigned func2( unsigned abcd[] ){
return abcd[1] ^ abcd[2] ^ abcd[3];}
unsigned func3( unsigned abcd[] ){
return abcd[2] ^ (abcd[1] |~ abcd[3]);}
typedef unsigned (*DgstFctn)(unsigned a[]);
unsigned *calctable( unsigned *k)
{
double s, pwr;
int i;
pwr = pow( 2, 32);
for (i=0; i<64; i++)
{
s = fabs(sin(1+i));
k[i] = (unsigned)( s * pwr );
}
return k;
}
unsigned rol( unsigned r, short N )
{
unsigned mask1 = (1<<N) -1;
return ((r>>(32-N)) & mask1) | ((r<<N) & ~mask1);
}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 36

CS6711 SECURITY LABORATORY

unsigned *md5( const char *msg, int mlen)

{
static DigestArray h0 = { 0x67452301, 0xEFCDAB89,
0x98BADCFE, 0x10325476 };
static DgstFctn ff[] = { &func0, &func1, &func2, &func3};
static short M[] = { 1, 5, 3, 7 };
static short O[] = { 0, 1, 5, 0 };
static short rot0[] = { 7,12,17,22};
static short rot1[] = { 5, 9,14,20};
static short rot2[] = { 4,11,16,23};
static short rot3[] = { 6,10,15,21};
static short *rots[] = {rot0, rot1, rot2, rot3 };
static unsigned kspace[64];
static unsigned *k;
static DigestArray h;
DigestArray abcd;
DgstFctn fctn;
short m, o, g;
unsigned f;
short *rotn;
union
{
unsigned w[16];
char b[64];
}mm;
int os = 0;
int grp, grps, q, p;
unsigned char *msg2;
if (k==NULL) k= calctable(kspace);
for (q=0; q<4; q++) h[q] = h0[q]; // initialize
{
grps = 1 + (mlen+8)/64;
msg2 = malloc( 64*grps);
memcpy( msg2, msg, mlen);
msg2[mlen] = (unsigned char)0x80;
q = mlen + 1;
while (q < 64*grps){ msg2[q] = 0; q++ ; }
{
MD5union u;
u.w = 8*mlen;
q -= 8;
memcpy(msg2+q, &u.w, 4 );
}
}
for (grp=0; grp<grps; grp++)
{
memcpy( mm.b, msg2+os, 64);

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 37

CS6711 SECURITY LABORATORY

for(q=0;q<4;q++) abcd[q] = h[q];

for (p = 0; p<4; p++)
{
fctn = ff[p];
rotn = rots[p];
m = M[p]; o= O[p];
for (q=0; q<16; q++)
{
g = (m*q + o) % 16;
f = abcd[1] + rol( abcd[0]+ fctn(abcd)+k[q+16*p]
+ mm.w[g], rotn[q%4]);
abcd[0] = abcd[3];
abcd[3] = abcd[2];
abcd[2] = abcd[1];
abcd[1] = f;
}}
for (p=0; p<4; p++)
h[p] += abcd[p];
os += 64;
}
return h;}
void main()
{
int j,k;
const char *msg = "The quick brown fox jumps over
the lazy dog";
unsigned *d = md5(msg, strlen(msg));
MD5union u;
clrscr();
printf("\t MD5 ENCRYPTION ALGORITHM IN C \n\n");
printf("Input String to be Encrypted using MD5 :
\n\t%s",msg);
printf("\n\nThe MD5 code for input string is: \n");
printf("\t= 0x");
for (j=0;j<4; j++){
u.w = d[j];
for (k=0;k<4;k++) printf("%02x",u.b[k]);
}
printf("\n");
printf("\n\t MD5 Encyption Successfully
Completed!!!\n\n");
getch();
system("pause");
getch();}

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 38

CS6711 SECURITY LABORATORY

OUTPUT:

RESULT:

Thus the implementation of MD5 hashing algorithm had been implemented

successfully using C.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 39

CS6711 SECURITY LABORATORY

EX. NO: 2(E) IMPLEMENTATION OF SHA-I

AIM:

To implement the SHA-I hashing technique using C program.

DESCRIPTION:

In cryptography, SHA-1 (Secure Hash Algorithm 1) is a cryptographic hash function.

SHA-1 produces a 160-bit hash value known as a message digest. The way
this algorithm works is that for a message of size < 264 bits it computes a 160-bit condensed
output called a message digest. The SHA-1 algorithm is designed so that it is practically
infeasible to find two input messages that hash to the same output message. A hash function
such as SHA-1 is used to calculate an alphanumeric string that serves as the cryptographic
representation of a file or a piece of data. This is called a digest and can serve as a digital
signature. It is supposed to be unique and non-reversible.

EXAMPLE:

ALGORITHM:

STEP-1: Read the 256-bit key values.

STEP-2: Divide into five equal-sized blocks named A, B, C, D and E.
STEP-3: The blocks B, C and D are passed to the function F.
STEP-4: The resultant value is permuted with block E.
STEP-5: The block A is shifted right by ‘s’ times and permuted with the result of step-4.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 40

CS6711 SECURITY LABORATORY

STEP-6: Then it is permuted with a weight value and then with some other key pair and
taken as the first block.
STEP-7: Block A is taken as the second block and the block B is shifted by ‘s’ times and
taken as the third block.
STEP-8: The blocks C and D are taken as the block D and E for the final output.

PROGRAM: (Secure Hash Algorithm)

import java.security.*;
public class SHA1 {
public static void main(String[] a) {
try {
MessageDigest md = MessageDigest.getInstance("SHA1");
System.out.println("Message digest object info: ");
System.out.println(" Algorithm = " +md.getAlgorithm());
System.out.println(" Provider = " +md.getProvider());
System.out.println(" ToString = " +md.toString());
String input = "";
md.update(input.getBytes());
byte[] output = md.digest();
System.out.println();
System.out.println("SHA1(\""+input+"\") =
+bytesToHex(output));
input = "abc";
md.update(input.getBytes());
output = md.digest();
System.out.println();
System.out.println("SHA1(\""+input+"\") = "
+bytesToHex(output));
input = "abcdefghijklmnopqrstuvwxyz";
md.update(input.getBytes());
output = md.digest();
System.out.println();
System.out.println("SHA1(\"" +input+"\") = "
+bytesToHex(output));
System.out.println(""); }
catch (Exception e) {
System.out.println("Exception: " +e);
}
}
public static String bytesToHex(byte[] b)
{
char hexDigit[] = {'0', '1', '2', '3', '4', '5', '6',
'7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'};
StringBuffer buf = new StringBuffer();
for (int j=0; j<b.length; j++) {

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 41

CS6711 SECURITY LABORATORY

buf.append(hexDigit[(b[j] >> 4) & 0x0f]);

buf.append(hexDigit[b[j] & 0x0f]); }
return buf.toString(); }
}

OUTPUT:

RESULT:

Thus the SHA-1 hashing technique had been implemented successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 42

CS6711 SECURITY LABORATORY

EX. NO: 3

IMPLEMENTATION OF DIGITAL SIGNATURE STANDARD

AIM:
To write a C program to implement the signature scheme named digital signature
standard (Euclidean Algorithm).

ALGORITHM:

STEP-1: Alice and Bob are investigating a forgery case of x and y.

STEP-2: X had document signed by him but he says he did not sign that document
digitally.
STEP-3: Alice reads the two prime numbers p and a.
STEP-4: He chooses a random co-primes alpha and beta and the x’s original signature
x.
STEP-5: With these values, he applies it to the elliptic curve cryptographic equation to
obtain y.
STEP-6: Comparing this ‘y’ with actual y’s document, Alice concludes that y is a
forgery.

PROGRAM: (Digital Signature Standard)

import java.util.*;
import java.math.BigInteger;
class dsaAlg {
final static BigInteger one = new BigInteger("1");
final static BigInteger zero = new BigInteger("0");
public static BigInteger getNextPrime(String ans)
{
BigInteger test = new BigInteger(ans);
while (!test.isProbablePrime(99))
e:
{
test = test.add(one);
}
return test;
}
public static BigInteger findQ(BigInteger n)
{
BigInteger start = new BigInteger("2");
while (!n.isProbablePrime(99))
{
while (!((n.mod(start)).equals(zero)))
{
start = start.add(one);

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 43

CS6711 SECURITY LABORATORY

}
n = n.divide(start);
}
return n;
}
public static BigInteger getGen(BigInteger p, BigInteger q,
Random r)
{
BigInteger h = new BigInteger(p.bitLength(), r);
h = h.mod(p);
return h.modPow((p.subtract(one)).divide(q), p);
}
public static void main (String[] args) throws
java.lang.Exception
{
Random randObj = new Random();
BigInteger p = getNextPrime("10600"); /* approximate
prime */
BigInteger q = findQ(p.subtract(one));
BigInteger g = getGen(p,q,randObj);
System.out.println(" \n simulation of Digital Signature
Algorithm \n");
System.out.println(" \n global public key components
are:\n");
System.out.println("\np is: " + p);
System.out.println("\nq is: " + q);
System.out.println("\ng is: " + g);
BigInteger x = new BigInteger(q.bitLength(), randObj);
x = x.mod(q);
BigInteger y = g.modPow(x,p);
BigInteger k = new BigInteger(q.bitLength(), randObj);
k = k.mod(q);
BigInteger r = (g.modPow(k,p)).mod(q);
BigInteger hashVal = new BigInteger(p.bitLength(),
randObj);
BigInteger kInv = k.modInverse(q);
BigInteger s = kInv.multiply(hashVal.add(x.multiply(r)));
s = s.mod(q);
System.out.println("\nsecret information are:\n");
System.out.println("x (private) is:" + x);
System.out.println("k (secret) is: " + k);
System.out.println("y (public) is: " + y);
System.out.println("h (rndhash) is: " + hashVal);
System.out.println("\n generating digital signature:\n");
System.out.println("r is : " + r);
System.out.println("s is : " + s);
BigInteger w = s.modInverse(q);
BigInteger u1 = (hashVal.multiply(w)).mod(q);
BigInteger u2 = (r.multiply(w)).mod(q);
BigInteger v = (g.modPow(u1,p)).multiply(y.modPow(u2,p));
v = (v.mod(p)).mod(q);
System.out.println("\nverifying digital signature
(checkpoints)\n:");
System.out.println("w is : " + w);

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 44

CS6711 SECURITY LABORATORY

System.out.println("u1 is : " + u1);

System.out.println("u2 is : " + u2);
System.out.println("v is : " + v);
if (v.equals(r))
{
System.out.println("\nsuccess: digital signature is
verified!\n " + r);
}
else
{
System.out.println("\n error: incorrect digital
signature\n ");
}
}
}

OUTPUT:

RESULT:

Thus the simple Code Optimization techniques had been implemented successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 45

CS6711 SECURITY LABORATORY

EX. NO: 04

SECURE DATA STORAGE, SECURE DATA TRANSMISSION AND FOR

CREATING DIGITAL SIGNATURES (GNUPG)

AIM:

Demonstrate how to provide secure data storage, secure data transmission and for
creating digital signatures (GnuPG).

INTRODUCTION:

Here’s the final guide in my PGP basics series, this time focusing on Windows

The OS in question will be Windows 7, but it should work for Win8 and Win8.1 as
well

Obviously it’s not recommended to be using Windows to access the DNM, but I
won’t go into the reasons here.

The tool well be using is GPG4Win

INSTALLING THE SOFTWARE:

SOFTWARE

1. Visit www.gpg4win.org
www.gpg4win.org. Click on the “Gpg4win 2.3.0” button
CS6711 SECURITY LABORATORY

2. On the following screen, click the “Download Gpg4win” button.

3. When the “Welcome” screen is displayed, click the “Next” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 47

CS6711 SECURITY LABORATORY

4. When the “License Agreement” page is displayed, click the “Next” button

5. Set the check box values as specified below, then click the “Next” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 48

CS6711 SECURITY LABORATORY

6. Set the location where you want the software to be installed. The default location
is fine. Then, click the “Next” button.

7. Specify where you want shortcuts to the software placed, then click the “Next”
button.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 49

CS6711 SECURITY LABORATORY

8. If you selected to have a GPG shortcut in your Start Menu, specify the folder in
which it will be placed. The default “Gpg4win” is OK. Click the “Install” button
to continue

9. A warning will be displayed if you have Outlook or Explorer opened. If this

occurs, click the “OK” button.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 50

CS6711 SECURITY LABORATORY

10. The installation process will tell you when it is complete. Click the “Next”
button

11. Once the Gpg4win setup wizard is complete, the following screen will be
displayed. Click the “Finish” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 51

CS6711 SECURITY LABORATORY

12. If you do not uncheck the “Show the README file” check box, the README
file will be displayed. The window can be closed after you’ve reviewed it.

CREATING YOUR PUBLIC AND PRIVATE KEYS

GPG encryption and decryption is based upon the keys of the person who will be
receiving the encrypted file or message. Any individual who wants to send the person an
encrypted file or message must possess the recipient’s public key certificate to encrypt the
message. The recipient must have the associated private key, which is different than the
public key, to be able to decrypt the file. The public and private key pair for an individual is
usually generated by the individual on his or her computer using the installed GPG program,
called “Kleopatra” and the following procedure:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 52

CS6711 SECURITY LABORATORY

1. From your start bar, select the “Kleopatra” icon to start the Kleopatra certificate
management software

2. The following screen will be displayed

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 53

CS6711 SECURITY LABORATORY

3. From the “File” dropdown, click on the “New Certificate” option

4. The following screen will be displayed. Click on “Create a personal OpenGPG key
pair” and the “Next” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 54

CS6711 SECURITY LABORATORY

5. The Certificate Creation Wizard will start and display the following:

6. Enter your name and e-mail address. You may also enter an optional comment. Then,
click the “Next” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 55

CS6711 SECURITY LABORATORY

7. Review your entered values. If OK, click the “Create Key” button

8. You will be asked to enter a passphrase

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 56

CS6711 SECURITY LABORATORY

9. The passphrase should follow strong password standards. After you’ve entered your
passphrase, click the “OK” button.

10. You will be asked to re-enter the passphrase

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 57

CS6711 SECURITY LABORATORY

11. Re-enter the passphrase value. Then click the “OK” button. If the passphrases match,
the certificate will be created.

12. Once the certificate is created, the following screen will be displayed. You can save a
backup of your public and private keys by clicking the “Make a backup Of Your Key
Pair” button. This backup can be used to copy certificates onto other authorized
computers.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 58

CS6711 SECURITY LABORATORY

13. If you choose to backup your key pair, you will be presented with the following
screen:

14. Specify the folder and name the file. Then click the “OK” button.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 59

CS6711 SECURITY LABORATORY

15. After the key is exported, the following will be displayed. Click the “OK” button.

16. You will be returned to the “Key Pair Successfully Created” screen. Click the
“Finish” button.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 60

CS6711 SECURITY LABORATORY

17. Before the program closes, you will need to confirm that you want to close the
program by clicking on the “Quit Kleopatra” button

DECRYPTING AN ENCRYPTED E-MAIL THAT HAS BEEN SENT TO YOU:

1. Open the e-mail message

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 61

CS6711 SECURITY LABORATORY

2. Select the GpgOL tab

3. Click the “Decrypt” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 62

CS6711 SECURITY LABORATORY

4. A command window will open along with a window that asks for the Passphrase to
your private key that will be used to decrypt the incoming message.

5. Enter your passphrase and click the “OK” button

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 63

CS6711 SECURITY LABORATORY

6. The results window will tell you if the decryption succeeded. Click the “Finish” button
top close the window

7. Your unencrypted e-mail message body will be displayed.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 64

CS6711 SECURITY LABORATORY

8. When you close the e-mail you will be asked if you want to save the e-mail message in
its unencrypted form. For maximum security, click the “No” button. This will keep the
message encrypted within the e-mail system and will require you to enter your
passphrase each time you reopen the e-mail message

RESULT:
Thus the secure data storage, secure data transmission and for creating digital
signatures (GnuPG) was developed successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 65

CS6711 SECURITY LABORATORY

EX. NO: 05

WORKING WITH KF SENSOR TOOL FOR CREATING AND

MONITORING HONEYPOT

AIM:

Honey Pot is a device placed on Computer Network specifically designed to capture

malicious network traffic. KF Sensor is the tool to setup as honeypot when KF Sensor is
running it places a siren icon in the windows system tray in the bottom right of the screen. If
there are no alerts then green icon is displayed.

INTRODUCTION:

HONEY POT:

A honeypot is a computer system that is set up to act as a decoy to lure cyber

attackers, and to detect, deflect or study attempts to gain unauthorized access to information
systems. Generally, it consists of a computer, applications, and data that simulate the
behavior of a real system that appears to be part of a network but is actually isolated and
closely monitored. All communications with a honeypot are considered hostile, as there's no
reason for legitimate users to access a honeypot. Viewing and logging this activity can
provide an insight into the level and types of threat a network infrastructure faces while
distracting attackers away from assets of real value. Honeypots can be classified based on
their deployment (use/action) and based on their level of involvement.
Based on deployment, honeypots may be classified as:
1. Production honeypots
2. Research honeypots
Production honeypots are easy to use, capture only limited information, and are used
primarily by companies or corporations. Production honeypots are placed inside the
production network with other production servers by an organization to improve their overall
state of security. Normally, production honeypots are low-interaction honeypots, which are
easier to deploy. They give less information about the attacks or attackers than research
honeypots.
Research honeypots are run to gather information about the motives and tactics of the Black
hat community targeting different networks. These honeypots do not add direct value to a
specific organization; instead, they are used to research the threats that organizations face and
to learn how to better protect against those threats.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 66

CS6711 SECURITY LABORATORY

KF SENSOR:

KFSensor is a Windows based honeypot Intrusion Detection System (IDS). It acts as

a honeypot to attract and detect hackers and worms by simulating vulnerable system services
and trojans. By acting as a decoy server it can divert attacks from critical systems and
provide a higher level of information than can be achieved by using firewalls and NIDS
alone. KFSensor is a system installed in a network in order to divert and study an attacker’s
behavior. This is a new technique that is very effective in detecting attacks.

The main feature of KFSensor is that every connection it receives is a suspect hence it
results in very few false alerts. At the heart of KFSensor sits a powerful internet daemon
service that is built to handle multiple ports and IP addresses. It is written to resist denial of
service and buffer overflow attacks. Building on this flexibility KFSensor can respond to
connections in a variety of ways, from simple port listening and basic services (such as
echo), to complex simulations of standard system services. For the HTTP protocol KFSensor
accurately simulates the way Microsoft’s web server (IIS) responds to both valid and invalid
requests. As well as being able to host a website it also handles complexities such as range
requests and client side cache negotiations. This makes it extremely difficult for an attacker
to fingerprint, or identify KFSensor as a honeypot.

PROCEDURE:

STEP-1: Download KF Sensor Evaluation Setup File from KF Sensor Website.

STEP-2: Install with License Agreement and appropriate directory path.
STEP-3: Reboot the Computer now. The KF Sensor automatically starts during windows
boot.
STEP-4: Click Next to setup wizard.
STEP-5: Select all port classes to include and Click Next.
STEP-6: “Send the email and Send from email”, enter the ID and Click Next.
STEP-7: Select the options such as Denial of Service[DOS], Port Activity, Proxy Emulsion,
Network Port Analyzer, Click Next.
STEP-8: Select Install as System service and Click Next.
STEP-9: Click finish.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 67

CS6711 SECURITY LABORATORY

SCREENSHOTS:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 68

CS6711 SECURITY LABORATORY

RESULT:
Thus the study of setup a hotspot and monitor the hotspot on network has been
developed successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 69

CS6711 SECURITY LABORATORY

EX. NO: 06

INSTALLATION OF ROOTKITS

AIM:

Rootkit is a stealth type of malicious software designed to hide the existence of

certain process from normal methods of detection and enables continued privileged access to
a computer.

INTRODUCTION:

Breaking the term rootkit into the two component words, root and kit, is a useful way
to define it. Root is a UNIX/Linux term that's the equivalent ofAdministrator in Windows.
The word kit denotes programs that allow someone to obtain root/admin-level access to the
computer by executing the programs in the kit — all of which is done without end-user
consent or knowledge.

A rootkit is a type of malicious software that is activated each time your system boots
up. Rootkits are difficult to detect because they are activated before your system's Operating
System has completely booted up. A rootkit often allows the installation of hidden files,
processes, hidden user accounts, and more in the systems OS. Rootkits are able to intercept
data from terminals,network connections, and the keyboard.

Rootkits have two primary functions: remote command/control (back door) and
software eavesdropping. Rootkits allow someone, legitimate or otherwise, to administratively
control a computer. This means executing files, accessing logs, monitoring user activity, and
even changing the computer's configuration. Therefore, in the strictest sense, even versions
of VNC are rootkits. This surprises most people, as they consider rootkits to be solely
malware, but in of themselves they aren't malicious at all.

The presence of a rootkit on a network was first documented in the early 1990s. At
that time, Sun and Linux operating systems were the primary targets for a hacker looking to
install a rootkit. Today, rootkits are available for a number of operating systems, including
Windows, and are increasingly difficult to detect on any network.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 70

CS6711 SECURITY LABORATORY

PROCEDURE:

STEP-1: Download Rootkit Tool from GMER website www.gmer.net.

STEP-2: This displays the Processes, Modules, Services, Files, Registry, RootKit /
Malwares, Autostart, CMD of local host.
STEP-3: Select Processes menu and kill any unwanted process if any.
STEP-4: Modules menu displays the various system files like .sys, .dll
STEP-5: Services menu displays the complete services running with Autostart, Enable,
Disable, System, Boot.
STEP-6: Files menu displays full files on Hard-Disk volumes.
STEP-7: Registry displays Hkey_Current_user and Hkey_Local_Machine.
STEP-8: Rootkits / Malwares scans the local drives selected.
STEP-9: Autostart displays the registry base Autostart applications.
STEP-10:CMD allows the user to interact with command line utilities or Registry

SCREENSHOTS:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 71

CS6711 SECURITY LABORATORY

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 72

CS6711 SECURITY LABORATORY

RESULT:
Thus the study of installation of Rootkit software and its variety of options were
developed successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 73

CS6711 SECURITY LABORATORY

EX. NO: 07

WORKING WITH NET STUMBLER TO PERFORM WIRELESS

AUDIT ON A ROUTER
AIM:

To perform wireless audit on an access point or a router and decrypt WEP and WPA
(Net Stumbler).

INTRODUCTION:

NET STUMBLER:

NetStumbler (Network Stumbler) is one of the Wi-Fi hacking tool which only
compatible with windows, this tool also a freeware. With this program, we can search for
wireless network which open and infiltrate the network. Its having some compatibility and
network adapter issues. NetStumbler is a tool for Windows that allows you to detect Wireless
Local Area Networks (WLANs) using 802.11b, 802.11a and 802.11g. It runs on Microsoft
Windows operating systems from Windows 2000 to Windows XP. A trimmed-down version
called MiniStumbler is available for the handheld Windows CE operating system.
It has many uses:
 Verify that your network is set up the way you intended
 Find locations with poor coverage in your WLAN.
 Detect other networks that may be causing interference on your network
 Detect unauthorized "rogue" access points in your workplace
 Help aim directional antennas for long-haul WLAN links.
 Use it recreationally for WarDriving.

PROCEDURE:

STEP-1: Download and install Netstumbler.

STEP-2: It is highly recommended that the PC should have wireless network card in order to
access wireless router.
STEP-3: Now Run Netstumbler in record mode and configure wireless card.
STEP-4: There are several indicators regarding the strength of the signal, such as GREEN
indicates Strong, YELLOW and other color indicates a weaker signal, RED
indicates a very weak and GREY indicates a signal loss.
STEP-5: Lock symbol with GREEN bubble indicates the Access point has encryption
enabled.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 74

CS6711 SECURITY LABORATORY

STEP-6: MAC assigned to Wireless Access Point is displayed on right hand pane.
STEP-7: The next column displays the Access points Service Set Identifier[SSID] which is
useful to crack the password.
STEP-8: To decrypt use WireShark tool by selecting Edit  preferences  IEEE 802.11.
STEP-9: Enter the WEP keys as a string of hexadecimal numbers as A1B2C3D4E5.

SCREENSHOTS:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 75

CS6711 SECURITY LABORATORY

Adding Keys: Wireless Toolbar

If the system is having the Windows version of Wireshark and have an

AirPcap adapter, then we can add decryption keys using the wireless toolbar.

If the toolbar isn't visible, you can show it by selecting View Wireless
Toolbar.

Click on the Decryption Keys button on the toolbar:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 76

CS6711 SECURITY LABORATORY

This will open the decryption key management window. As shown in the window you
can select between three decryption modes: None, Wireshark and Driver:

RESULT:
Thus the wireless audit on an access point or a router and decrypt WEP and WPA
(Net Stumbler) was done successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 77

CS6711 SECURITY LABORATORY

EX. NO: 08

WORKING WITH SNORT TOOL TO DEMONSTRATE INTRUSION

DETECTION SYSTEM

AIM:

Snort is an open source network intrusion detection system (NIDS) and it is a packet
sniffer that monitors network traffic in real time.

INTRODUCTION:

INTRUSION DETECTION SYSTEM :

Intrusion detection is a set of techniques and methods that are used to detect
suspicious activity both at the network and host level. Intrusion detection systems fall into
two basic categories:
 Signature-based intrusion detection systems
 Anomaly detection systems.
Intruders have signatures, like computer viruses, that can be detected using software.
You try to find data packets that contain any known intrusion-related signatures or anomalies
related to Internet protocols. Based upon a set of signatures and rules, the detection system is
able to find and log suspicious activity and generate alerts.

Anomaly-based intrusion detection usually depends on packet anomalies present in

protocol header parts. In some cases these methods produce better results compared to
signature-based IDS. Usually an intrusion detection system captures data from the network
and applies its rules to that data or detects anomalies in it. Snort is primarily a rule-based
IDS, however input plug-ins are present to detect anomalies in protocol headers.

SNORT TOOL:

Snort is based on libpcap (for library packet capture), a tool that is widely used in
TCP/IPtraffic sniffers and analyzers. Through protocolanalysis and content searching and
matching, Snort detects attack methods, including denial of service, buffer overflow, CGI
attacks, stealthport scans, and SMB probes. When suspicious behavior is detected, Snort
sends a real-time alert to syslog, a separate 'alerts' file, or to apop-up window.

Snort is currently the most popular free network intrusion detection software. The
advantages of Snort are numerous. According to the snort web site, “It can perform protocol

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 78

CS6711 SECURITY LABORATORY

analysis, content searching/matching, and can be used to detect a variety of attacks and
probes, such as buffer overflow, stealth port scans, CGI attacks, SMB probes, OS
fingerprinting attempts, and much more” (Caswell).

One of the advantages of Snort is its ease of configuration. Rules are very flexible,
easily written, and easily inserted into the rule base. If a new exploit or attack is found a rule
for the attack can be added to the rule base in a matter of seconds. Another advantage of
snort is that it allows for raw packet data analysis.

SNORT can be configured to run in three modes:

1. Sniffer mode
2. Packet Logger mode
3. Network Intrusion Detection System mode
1. Sniffer mode
 Snort –v Print out the TCP/IP packets header on the screen
 Snort –vd show the TCP/IP ICMP header with application data in transmit
2. Packet Logger mode
 snort –dev –l c:\log [create this directory in the C drive] and snort will
automatically know to go into packet logger mode, it collects every packet it
sees and places it in log directory.
 snort –dev –l c:\log –h ipaddress/24:This rule tells snort that you want to
print out the data link and TCP/IP headers as well as application data into the
log directory. snort –l c:\log –b This is binary mode logs everything into a
single file.
3. Network Intrusion Detection System mode
 snort –d c:\log –h ipaddress/24 –c snort.conf This is a configuration file
applies rule to each packet to decide it an action based upon the rule type in
the file.
 Snort –d –h ipaddress/24 –l c:\log –c snort.conf This will cnfigure snort to
run in its most basic NIDS form, logging packets that trigger rules specifies in
the snort.conf.

PROCEDURE:

STEP-1: Sniffer mode snort –v  Print out the TCP/IP packets header on the screen.
STEP-2: Snort –vd  Show the TCP/IP ICMP header with application data in transit.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 79

CS6711 SECURITY LABORATORY

STEP-3: Packet Logger mode  snort –dev –l c:\log [create this directory in the C drive]
and snort will automatically know to go into packet logger mode, it collects every
packet it sees and places it in log directory.
STEP-4: snort –dev –l c:\log –h ipaddress/24  This rule tells snort that you want to print
out the data link and TCP/IP headers as well as application data into the log
directory.
STEP-5: snort –l c:\log –b  this binary mode logs everything into a single file.
STEP-6: Network Intrusion Detection System mode  snort –d c:\log –h ipaddress/24 –c
snort.conf  This is a configuration file that applies rule to each packet to decide
it an action based upon the rule type in the file.
STEP-7: snort –d –h ip address/24 –l c:\log –c snort.conf  This will configure snort to run
in its most basic NIDS form, logging packets that trigger rules specifies in the
snort.conf.
STEP-8: Download SNORT from snort.org. Install snort with or without database support.
STEP-9: Select all the components and Click Next. Install and Close.
STEP-10: Skip the WinPcap driver installation.
STEP-11: Add the path variable in windows environment variable by selecting new
classpath.
STEP-12: Create a path variable and point it at snort.exe variable name  path and variable
value  c:\snort\bin.
STEP-13: Click OK button and then close all dialog boxes. Open command prompt and type
the following commands:

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 80

CS6711 SECURITY LABORATORY

INSTALLATION PROCESS :

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 81

CS6711 SECURITY LABORATORY

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 82

CS6711 SECURITY LABORATORY

RESULT:
Thus the demonstration of the instruction detection using Snort tool was done
successfully.

UCET DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING 83