Temperature

Miniature resistance thermometer

Thread-mounted, explosion-protected version
Model TR34
WIKA data sheet TE 60.34

further approvals
see page 10

Applications

■■ Machine building, plant and vessel construction

■■ Propulsion technology, hydraulics

Special features

■■ Intrinsically safe Ex i version, very compact design, high

vibration resistance and fast response time
■■ With direct sensor output (Pt100, Pt1000 in 2-, 3- or 4-wire
connection) or integrated transmitter with 4 ... 20 mA
output signal
■■ Integrated transmitter is individually parameterisable with
free-of-charge WIKAsoft-TT PC configuration software
■■ Sensor element with accuracy class A in accordance with
IEC 60751

Description
Fig. left: Resistance thermometer, model TR34
Resistance thermometers of this series are used as universal Fig. right: M12 x 1 adapter to DIN EN 175301-803
thermometers for the measurement of liquid and gaseous angular connector
media in the range -50 ... +250 °C (-58 ... +482 °F). The
instruments are intrinsically safe and suitable for use in
hazardous areas.

They can be used for pressures up to 140 bar with 3 mm

sensor diameters and up to 270 bar with 6 mm sensor
diameters, depending on the instrument version. All electrical
components are protected against humidity (IP67 or IP69K) Insertion length, process connection, sensor and connection
and designed to withstand vibration (20 g, depending on method can each be selected for the respective application
instrument version). within the order information. The model TR34 resistance
thermometer consists of a thermowell with a fixed process
The resistance thermometer is available with direct sensor connection and is screwed directly into the process. The
output or integrated transmitter, which can be configured electrical connection is made via an M12 x 1 circular
individually via the PC configuration software WIKAsoft-TT. connector. An adapter for electrical connection with angular
Measuring range, damping, fault signal per NAMUR NE43 connector per DIN EN 175301-803 is optionally available
and TAG no. can be adjusted. (industrial property rights registered under No. 001370985).

WIKA data sheet TE 60.34 ∙ 08/2018 Page 1 of 11

Data sheets showing similar products and accessories:

Thread-mounted resistance thermometer; model TR33; see data sheet TE 60.34
OEM screw-in thermometer with plug connection; model TF35; see data sheet TE 67.10
Sensor
The sensor is located in the tip of the thermometer.

The resistance thermometers of the series TR34 are designed for direct installation into the
process. Using it in an additional thermowell is not advisable.

Sensor diameter Process connection

in mm G¼B G⅜B G½B ¼ NPT ½ NPT M12 x 1.5 M20 x 1.5
3 x x x x x x x
6 x x x x x x x

Sensor tube length

Sensor diameter Insertion length U1 in mm
in mm 50 75 100 120 150 200 250 300 350 400
3 x - - - - - - - - -
6 x x x x x x x x x x

Further sensor tube lengths on request.

Specifications

Thermometer with direct sensor output with Pt100 (model TR34-x-Px) and Pt1000 (model TR34-x-Sx)
Temperature range
■■ Class A Without neck tube -30 ... +150 °C (-22 ... +302 °F)
With neck tube -30 ... +250 °C (-22 ... +482 °F)
■■ Class B Without neck tube -50 ... +150 °C (-58 ... +302 °F)
With neck tube -50 ... +250 °C (-58 ... +482 °F)
Temperature at the connector Max. 85 °C (185 °F)
Measuring element ■■ Pt100 (measuring current: 0.1 ... 1.0 mA)
■■ Pt1000 (measuring current: 0.1 ... 0.3 mA)
Connection method ■■ 2-wire The lead resistance is recorded as an error in the measurement.
■■ 3-wire With a cable length of 30 m or longer, measuring deviations can occur.
■■ 4-wire The lead resistance can be ignored.
Tolerance value of the measuring element ■■ Class A
per IEC 60751 ■■ Class B at 2-wire
Electrical connection M12 x 1 circular connector (4-pin)
Explosion protection Intrinsically safe to Ex i (ATEX) gas/dust
(for further information see “Further specifications for explosion-protected version”)

For detailed specifications for Pt sensors, see Technical information IN 00.17 at www.wika.com.

WIKA data sheet TE 60.34 ∙ 08/2018 Page 2 of 11

 Thermometer with transmitter and 4 ... 20 mA output signal (model TR34-x-TT)
Temperature range Without neck tube -30 ... +150 °C (-22 ... +302 °F)
With neck tube -30 ... +250 °C (-22 ... +482 °F) 1)
Measuring element Pt1000
Connection method 2-wire
Tolerance value of the measuring element Class A
per IEC 60751
Measuring deviation of the transmitter per IEC 60770 ±0.25 K
Total measuring deviation in accordance with Measuring deviation of the measuring element + the transmitter
IEC 60770
Measuring span Minimum 20 K, maximum 300 K
Basic configuration Measuring range 0 ... 150 °C (32 ... 302 °F), other measuring ranges are
adjustable
Analogue output 4 ... 20 mA, 2-wire
Linearisation Linear to temperature per IEC 60751
Linearisation error ±0.1 % 2)
Switch-on delay, electrical Max. 4 s (time before the first measured value)
Warming-up period After approx. 4 minutes, the instrument will function to the specifications
(accuracy) given in the data sheet.
Current signal for fault signal Configurable in accordance with NAMUR NE43
downscale ≤ 3.6 mA upscale ≥ 21.0 mA
Sensor short-circuit Not configurable, in accordance with NAMUR NE43 downscale ≤ 3.6 mA
Sensor current < 0.3 mA (self-heating can be ignored)
Load RA RA ≤ (UB - 10 V) / 23 mA with RA in Ω and UB in V
Effect of load ±0.05 % / 100 Ω
Power supply UB DC 10 ... 30 V
Max. permissible residual ripple 10 % generated by UB < 3 % ripple of the output current
Power supply input Protected against reverse polarity
Power supply effect ±0.025 % / V (depending on the power supply UB)
Influence of the ambient temperature 0.1 % of span / 10 K Ta
Electromagnetic compatibility (EMC) 4) EN 61326 emission (group 1, class B) and interference immunity (industrial
application) 3), configuration at 20 % of the full measuring range
Temperature units configurable °C, °F, K
Info data TAG No., description and user message can be stored in transmitter
Configuration and calibration data Permanently stored
Electrical connection M12 x 1 circular connector (4-pin)
Explosion protection Intrinsically safe to Ex i (ATEX) gas/dust
(for further information see “Further specifications for explosion-protected version”)

Case
Material Stainless steel
Ingress protection
■■ Case with connected connector IP67 and IP69 per IEC/EN 60529, IP69K per ISO 20653
The stated ingress protection only applies when plugged in using mating
connectors that have the appropriate ingress protection.
■■ Coupler connector, not connected IP67 per IEC/EN 60529
Weight in kg Approx. 0.2 ... 0.7 (depending on version)
Dimensions See “Dimensions in mm”

Readings in % refer to the measuring span

1) The temperature transmitter should therefore be protected from temperatures over 85 °C (185 °F).
2) ±0.2 % for measuring ranges with a lower limit less than 0 °C (32 °F)
3) Use resistance thermometers with shielded cable, and ground the shield on at least one end of the lead, if the lines are longer than 30 m or leave the building. The instrument must be
operated grounded.
4) During transient interferences (e.g. burst, surge, ESD) take into account an increased measuring deviation of up to 2 %.

WIKA data sheet TE 60.34 ∙ 08/2018 Page 3 of 11

 Ambient conditions
Ambient temperature range
■■ Model TR34-x-TT -40 ... +85 °C (-40 ... +185 °F)
■■ Models TR34-x-Px, TR34-x-Sx -50 ... +85 °C (-58 ... +185 °F)
Storage temperature range -40 ... +85 °C (-40 ... +185 °F)
Climate class per IEC 60654-1
■■ Model TR34-x-TT Cx (-40 ... +85 °C or -40 ... +185 °F, 5 ... 95 % r. h.)
■■ Models TR34-x-Px, TR34-x-Sx Cx (-50 ... +85 °C or -58 ... +185 °F, 5 ... 95 % r. h.)
Maximum permissible humidity per IEC 60068-2-30 var. 2 100 % r. h., condensation allowed
Maximum operating pressure 5) 6) 140 bar with 3 mm sensor diameter
270 bar with 6 mm sensor diameter
Vibration resistance per IEC 60068-2-6 10 ... 2,000 Hz, 20 g 5)
Shock resistance per IEC 60068-2-27 50 g, 6 ms, 3 axis, 3 faces, 3 times for each face
Salt fog IEC 60068-2-11

5) Dependent on the instrument version

6) Reduced operating pressure when using a compression fitting: Stainless steel: max. 100 bar
PTFE: max. 8 bar

Further specifications for explosion-protected version

■■ Thermometer with transmitter and 4 ... 20 mA output signal (model TR34-x-TT)

Marking:
Hazardous gas Temperature Ambient temperature Maximum surface temperature (Tmax) at
atmosphere class range (Ta) the sensor or thermowell tip
II 1G Ex ia IIC T1 - T6 Ga T6 -40 ... +45 °C TM (medium temperature) + self-heating (15 K)
II 1/2G Ex ia IIC T1 - T6 Ga/Gb Pay attention to the specific conditions for safe use.
T5 -40 ... +60 °C
II 2G Ex ia IIC T1 - T6 Gb
T4 -40 ... +85 °C
T3 -40 ... +85 °C
T2 -40 ... +85 °C
T1 -40 ... +85 °C

Hazardous dust Power Pi Ambient temperature Maximum surface temperature (Tmax) at

atmosphere range (Ta) the sensor or thermowell tip
II 1D Ex ia IIIC T135 °C Da 750 mW -40 ... +40 °C TM (medium temperature) + self-heating (15 K)
II 1/2D Ex ia IIIC T135 °C Da/Db Pay attention to the specific conditions for safe use.
650 mW -40 ... +70 °C
II 2D Ex ia IIIC T135 °C Db
550 mW -40 ... +85 °C

Safety-related maximum values for the current loop circuit (+ and - connections):
Parameters Hazardous gas Hazardous dust
atmosphere atmosphere
Terminals +/- +/-
Voltage Ui DC 30 V DC 30 V
Current li 120 mA 120 mA
Power Pi 800 mW 750/650/550 mW
Effective internal capacitance Ci 29.7 nF 29.7 nF
Effective internal inductance Li Negligible Negligible
Maximum self-heating at the sensor or thermowell tip 15 K 15 K

WIKA data sheet TE 60.34 ∙ 08/2018 Page 4 of 11

■■ Thermometer with direct sensor output with Pt100 (model TR34-x-Px) and Pt1000 (model TR34-x-Sx)

Marking:
Marking Temperature Ambient temperature Maximum surface temperature (Tmax) at
class range (Ta) the sensor or thermowell tip
II 1G Ex ia IIC T1 - T6 Ga T6 -50 ... +80 °C TM (medium temperature) + self-heating
II 1/2G Ex ia IIC T1 - T6 Ga/Gb Pay attention to the specific conditions for safe use.
T5 -50 ... +85 °C
II 2G Ex ia IIC T1 - T6 Gb
T4 -50 ... +85 °C
T3 -50 ... +85 °C
T2 -50 ... +85 °C
T1 -50 ... +85 °C

Marking Power Pi Ambient temperature Maximum surface temperature (Tmax) at

range (Ta) the sensor or thermowell tip
II 1D Ex ia IIIC T135 °C Da 750 mW -50 ... +40 °C TM (medium temperature) + self-heating
II 1/2D Ex ia IIIC T135 °C Da/Db Pay attention to the specific conditions for safe use.
650 mW -50 ... +70 °C
II 2D Ex ia IIIC T135 °C Db
550 mW -50 ... +85 °C

Safety-related maximum values for the current loop circuit (connections in accordance with pin assignment 1 - 4):
Parameters Gas applications Dust applications
Terminals 1-4 1-4
Voltage Ui DC 30 V DC 30 V
Current li 550 mA 250 mA
Power Pi 1.500 mW 750/650/550 mW
Effective internal capacitance Ci Negligible Negligible
Effective internal inductance Li Negligible Negligible
Maximum self-heating at the sensor or thermowell tip (Rth) = 335 K/W (Rth) = 335 K/W

WIKA data sheet TE 60.34 ∙ 08/2018 Page 5 of 11

Dimensions in mm

Process connection with parallel threads (or without process connection)

without neck tube

with neck tube

with compression fitting

140069565.02
without process
connection
X

Legend:
A (U1) Insertion length
N (MH) Neck length
1) At a process temperature of > 150 °C (302 °F), a neck length N (MH) of 70 mm is necessary, X Height process connection
otherwise N (MH) selectable (55, 65 or 70 mm). Ød Sensor diameter

Thread Height process connection X

G½ 11
G⅜ 11
G¼ 10
M12 11
M20 11

WIKA data sheet TE 60.34 ∙ 08/2018 Page 6 of 11

Process connection with tapered thread

without neck tube with neck tube

with compression fitting

140069565.02
X

Legend:
A (U2) Insertion length
N (MH) Neck length
1) At a process temperature of > 150 °C (302 °F), a neck length N (MH) of 70 mm is necessary, X Height process connection
otherwise N (MH) selectable (55, 65 or 70 mm). Ød Sensor diameter

Thread Height process connection X

¼ NPT 15
½ NPT 19

Configuration software WIKAsoft-TT

Configuration software
(multilingual) as a download
from www.wika.com

WIKA data sheet TE 60.34 ∙ 08/2018 Page 7 of 11

Accessories

Model Special features Order no.

Programming unit ■■ Easy to use 14231581
Model PU-548 ■■ LED status display
■■ Compact design
■■ No further voltage supply needed, neither for the programming unit nor for the
transmitter

(replaces programming unit model PU-448)

Adapter cable M12 to PU-548 Adapter cable for the connection of a model TR34 resistance thermometer to the 14003193
model PU-548 programming unit

M12 x 1 transmitter adapter Adapter for the connection of a resistance thermometer with a DIN EN 175301-803 14069503
to angular connector form A angular connector with a 4 ... 20 mA output signal (data sheet AC 80.17)
DIN EN 175301-803 (yellow female Case: PA
connector element) M12 x 1 Angular
Ambient temperature: -40 ... +115 °C
connector connector
4 ... 20 mA
Union nut: zinc diecast
Contacts: copper-zinc alloy, tin-plated
Dielectric strength: 500 V
Ingress protection: IP65
mA

4 ... 20 mA
M12 x 1 Pt adapter to angular Adapter for the connection of the resistance thermometer with a 14061115
connector DIN EN 175301-803 DIN EN 175301-803 form A angular connector with direct resistance output signal
(black female connector element) (data sheet AC 80.17)
mA
Case: PA
M12 x 1 Angular
connector connector Ambient temperature: -40 ... +115 °C
Union nut: zinc diecast
Contacts: copper-zinc alloy, tin-plated
Dielectric strength: 500 V
Ingress protection: IP65

Angular connector per DIN EN 175301-803 form A 11427567

Sealing for for use with angular connector DIN EN 175301-803-A 11437902
angular connector EPDM, brown

M12 connection cable Cable socket straight, 4-pin, ingress protection IP67 Cable length 2 m 14086880
■■ Temperature range -20 ... +80 °C
Cable length 5 m 14086883
Angled socket, 4-pin, ingress protection IP67 Cable length 2 m 14086889
■■ Temperature range -20 ... +80 °C
Cable length 5 m 14086891
M12 connector Female angled, 4-pin, ingress protection IP67 14136815
Screw connection for conductor cross-section 0.25 … 0.75 mm² (24 …18 AWG)
Cable gland Pg7, cable outer diameter 4 … 6 mm
■■ Temperature range -40 ... +80 °C
■■ Suitable for hazardous areas

WIKA data sheet TE 60.34 ∙ 08/2018 Page 8 of 11

Connecting PU-548 programming unit
Connection PU-548 ↔ adapter cable with M12 connector

14004919.01
TR34

(predecessor, programming unit model PU-448, also compatible)

Electrical connection

Output signal 4 ... 20 mA Output signal Pt100 or Pt1000 sensor

M12 x 1, 4-pin circular connector M12 x 1, 4-pin circular connector

Pin Signal Description

1 L+ 10 ... 30 V
2 VQ not connected
3 L- 0V
4 C not connected

Load diagram
The permissible load depends on the loop supply voltage. 1083

For communication with the instrument with programming 833

unit PU-548, a max. load of 350 Ω is admissible. 583

Load RA in Ω

0 10 24 30 36

Voltage UB in V

WIKA data sheet TE 60.34 ∙ 08/2018 Page 9 of 11

Approvals

Logo Description Country

EU declaration of conformity European Union
■■ EMC directive 1)
EN 61326 emission (group 1, class B) and interference immunity (industrial application)
■■ RoHS directive
■■ ATEX directive
Hazardous areas
Zone 0 gas [II 1G Ex ia IIC T1 ... T6 Ga]
Zone 1 mounting to zone 0 gas [II 1/2G Ex ia IIC T1 ... T6 Ga/Gb]
Zone 1 gas [II 2G Ex ia IIC T1 ... T6 Gb]
Zone 20 dust [II 1D Ex ia IIIC T135 °C Da]
Zone 21 mounting to zone 20 dust [II 1/2D Ex ia IIIC T135 °C Da/Db]
Zone 21 dust [II 2D Ex ia IIIC T135 °C Db]
IECEx (option) - in conjunction with ATEX International
Hazardous areas
Zone 0 gas [Ex ia IIC T1 ... T6 Ga]
Zone 1 mounting to zone 0 gas [Ex ia IIC T1 ... T6 Ga/Gb]
Zone 1 gas [Ex ia IIC T1 ... T6 Gb]
Zone 20 dust [Ex ia IIIC T135 °C Da]
Zone 21 mounting to zone 20 dust [Ex ia IIIC T135 °C Da/Db]
Zone 21 dust [Ex ia IIIC T135 °C Db]
CSA (option) USA and Canada
■■ Safety (e.g. electr. safety, overpressure, ...)
■■ Hazardous areas
Class I, division 1 or 2, groups A, B, C, D T1 ... T6
Class I, zone 0 or 1, IIC Ex/AEx ia IIC T1 ... T6 Ga
Class II / III, division 1 or 2, groups E, F, G T1 ... T6 / 135 °C
Class II / III, zone 20 or 21, Ex / AEx ia IIIC T135 °C Da
EAC (option) Eurasian Economic Community
Hazardous areas
Zone 0 gas [0Ex ia IIC T3/T4/T5/T6]
Zone 20 dust [DIP A20 TA 65 °C/95 °C/125 °C]
GOST (option) Russia
Metrology, measurement technology
KazInMetr (option) Kazakhstan
Metrology, measurement technology
- MTSCHS (option) Kazakhstan
Permission for commissioning
BelGIM (option) Belarus
Metrology, measurement technology
UkrSEPRO (option) Ukraine
Metrology, measurement technology
DNOP - MakNII (option) Ukraine
■■ Mining
■■ Hazardous areas
Zone 0 gas [II 1G Ex ia IIC T1 ... T6 Ga]
Zone 1 mounting to zone 0 gas [II 1/2G Ex ia IIC T1 ... T6 Ga/Gb]
Zone 20 dust [II 1D Ex ia IIIC T135 °C Da]
Zone 21 mounting to zone 20 dust [II 1/2D Ex ia IIIC T135 °C Da/Db]
Uzstandard (option) Uzbekistan
Metrology, measurement technology
INMETRO (option) Brasil
■■ Metrology, measurement technology
■■ Hazardous areas
Zone 0 gas [Ex ia IIC T1 ... T6 Ga]
Zone 1 mounting to zone 0 gas [Ex ia IIC T1 ... T6 Ga/Gb]
Zone 20 dust [Ex ia IIIC T135 °C Da]
Zone 21 mounting to zone 20 dust [Ex ia IIIC T135 °C Da/Db]

WIKA data sheet TE 60.34 ∙ 08/2018 Page 10 of 11

 Logo Description Country
NEPSI (option) China
Hazardous areas
Zone 0 gas [Ex ia IT C T1 ~ T6 Ga]
Zone 20 dust [Ex iaD 20 T135]

1) Only for built-in transmitter

Certificates (option)

Certification type Measuring Material

accuracy certificate
2.2 test report x x
3.1 inspection certificate x x
DKD/DAkkS calibration certificate x -

The different certifications can be combined with each other.

Approvals and certificates, see website

Explosion protection

Resistance thermometers of the TR34 series have an

EC-type examination certificate for “intrinsically safe”, Ex i,
ignition protection.
These instruments comply with the requirements of the ATEX
directive for gases and dusts.

The permissible power, Pmax, as well as the permissible

ambient temperature, for the respective category can be
seen on the EC-type examination certificate, the certificate
for hazardous areas or in the operating instructions.

Ordering information
Model / Explosion protection / Output signal / Transmitter temperature unit / Process temperature / Transmitter initial value /
Transmitter end value / Process connection / Sensor diameter / Insertion length A (U1) or A (U2) / Neck length N (MH) /
Accessories / Certificates

© 11/2014 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.

WIKA data sheet TE 60.34 ∙ 08/2018 Page 11 of 11

08/2018 EN

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30
63911 Klingenberg/Germany
Tel. +49 9372 132-0
Fax +49 9372 132-406
[email protected]
www.wika.de