Scribd
Upload
223 views1 page

Xconnect Using Ios XR and Ios Xe 0

This network diagram shows an MPLS backbone connecting two locations, each with an ASR 920 router. VLAN 200 connects devices at Location B to the MPLS backbone through the ASR 920's GigabitEthernet 0/0/23 and 0/0/3 interfaces. VLAN 100 connects devices at Location A to the MPLS backbone through the ASR 920's GigabitEthernet 0/0/1 and 0/0/23 interfaces.

Uploaded by

JJ López
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
223 views1 page

Xconnect Using Ios XR and Ios Xe 0

This network diagram shows an MPLS backbone connecting two locations, each with an ASR 920 router. VLAN 200 connects devices at Location B to the MPLS backbone through the ASR 920's GigabitEthernet 0/0/23 and 0/0/3 interfaces. VLAN 100 connects devices at Location A to the MPLS backbone through the ASR 920's GigabitEthernet 0/0/1 and 0/0/23 interfaces.

Uploaded by

JJ López
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASR 9006

Location B 0
ASR 920 00 , 20
N1
VL A
MPLS backbone G0/1/0/1
G0/1/0/15
G0/0/23 VLAN 200

G0/0/3
G0/1/0/19
VLAN 200

VLAN 100

MPLS backbone

Location A
ASR 920
G0/0/23

G0/0/1
VLAN 100

You might also like