Ch2 Rig Design S
Ch2 Rig Design S
Rig Components
Drilling Rig
Drilling Rig Equipment
• Power System
• Hoisting System
• Circulating System
• Rotary System
• Well Control System
• Monitoring System
Power System
• Drawworks
• Drilling Line
• Deadline/Fastline
• Crown Block
• Travelling Block
• Hook, Elevators
Derrick
Hoisting
System
Crown Block
Travelling Block
and Hook
Pulley
System
Strength of Drilling line
Sheave Efficiency
Circulating System
• Mud Pits
• Mud Pumps
• Standpipe
• Kelly Hose
• Drillstring/Annulus
• Bell Nipple/Flowline
• Solids Removal Equipment
Circulating
System
Mud Pump
Duplex Pump
Triplex Pump
Kelly Hose and
Swivel
Rotary System
• Swivel
• Kelly/Kelly Bushing
• Rotary Table
Rotary System
Kelly Hose and
Swivel
Kelly Bushing
Slips
Pipe Tongs
Pipe Tongs
Top Drive
System
Annular Preventer
Annular Preventer Element
Ram Type Preventer
Ram Type Preventer
BOP and Choke Manifold
Learning Objectives
General:
• Describe the six major sub-systems of a drilling rig and
the function of each system.
Learning Objectives
Power System:
• Describe the power system on a drilling rig.
Learning Objectives
Hoisting system:
• Identify the names of each of the component parts of
the hoisting system and state its purpose.
• Describe the slip and slip and cut operation.
• Calculate the tension on the drilling line and select an
appropriate line diameter for a particular application.
• Calculate the load on the derrick when running or
pulling a string or casing or drillpipe.
• Calculate the work done on a drilling line.
Learning Objectives
Circulating System:
• Describe the functions of the drilling fluid.
• Identify the names of each of the component parts of
the circulating system and state its purpose.
• Describe the difference between duplex and triplex
pumps.
• Calculate the volumetric output of a triplex and duplex
pump.
• Calculate the horsepower requirements for the mud
pumps.
Learning Objectives
Rotary System:
• Identify the names of each of the component parts of
the rotary system and state its purpose.
• State the benefits of the topdrive system.
• Describe the procedure for running and pulling out of
hole.
• Describe the procedure for making a connection.
Learning Objectives