INTRODUCTION

AND
LOADING DETAILS
 KALESWARAM PROJECT
Dr.B.R.AMBEDKAR PRANAHITHA CHEVELLA SUJALA SRAVANTHI
PACKAGE - 6

DESIGN OF PUMP HOUSE MACHINE HALL

INTRODUCTION :

Based on Re Engineering of the Project, Govt of Telangana have decided to install 7 Pumps in the Pump House of
Package 6 and lift 624.17 cumecs from Sripada Yellampalli Reservoir, as against 6 pumps and 535 cumces
contemplated earlier. The MDDL of the Reservoir is also re fixed as +143.90m for the lift. The FRL of Medaram Tank
is raised to +233.00m as against +231.50m.
Package 6 consists of Approach channel from SYP Reservoir, Intake tunnels (10m dia. - 2nos), underground Surge
Pool, Draft Tube tunnels(7nos), underground Pump House, Delivery tunnels, Delivery Cistern and Lead Channel to
Medaram Tank.
This report deals with the Design of Machine hall in under ground Pump house.

LOADING DETAILS:

1 Input details:-
Grade of concrete = M25
Grade of steel = Fe415
Density of Brick = 19.000 kN/m3
Thickness of wall = 230.000 mm
Thickness of plaster = 12.000 mm
Density of PCC Plaster = 21.000 kN/m3
2 Load calculations:-
Slab Dead load:-
slab thickness = 250.000 mm
Dead load of slab = 6.250 kN/m2
Floor finishes = 1.500 kN/m2
Total = 539.750 kN/m2
Slab Live load = 10.000 kN/m2

3.a Load on Tie beams of +133LVl

Height of wall (138-1.5(Gantry beam depth)-133) = 3.500 m
Wall load = 16.177 KN/m

b. Load on Tie beams of +128.5LVl

Height of wall (133-0.75(Tie beam depth)-128.5) = 3.750 m
Wall load = 17.333 KN/m

c. Load on Tie beams of +124.35LVl

Height of wall (128.5-0.75(Tie beam depth)-124.35) = 3.400 m
Wall load = 15.715 KN/m

d. Load on Outer beams of +120LVl

Height of wall (124.35-0.7(Outer beam depth)-120) = 3.650 m
Wall load = 16.870 KN/m

e. Load on Outer beams of +115.5LVl

 Height of wall (120-0.7(Outer beam depth)-115.5) = 3.800 m
Wall load = 17.564 KN/m
* Considered 18KN/m load on all beams

4.a Lift Head room slab:

slab thickness = 175.000 mm
Dead load of slab = 4.375 kN/m2
Floor finishes = 1.500 kN/m2
Total = 5.875 kN/m2
b. Wall load on lift beams
Max Height of wall (129.35-0.55(Lift beam depth)-124.35) = 4.450 m
Wall load = 21.689 KN/m
* Considered 22KN/m load on these beams
4.4m
5 Distribution loads:
a. At +115.5 LVL 2.2m
I. Three sides supported slab at stair case
Dead load :
Load on Longitudinal beam = 593.725 Kn/m
* 9.000 Kn/m
Load on side beams = 593.725 Kn/m
* 9.000 Kn/m
Moment on longitudinal beam = 435.398 Kn-m/m
* 7.000 Kn-m/m
Moment on side beams = 435.398 Kn-m/m
* 7.000 Kn-m/m
Live load :
Load on Longitudinal beam = 11.000 Kn/m
* 11.500 Kn/m
Load on side beams = 11.000 Kn/m
* 11.500 Kn/m
Moment on longitudinal beam = 8.067 Kn-m/m
* 9.000 Kn-m/m
Moment on side beams = 8.067 Kn-m/m
* 9.000 Kn-m/m

II. AT BFV Foundation opening

Dead load :
Length of cantilever from side beam = 0.850 m
Load on side beam = 458.788 Kn/m
* 7.000 Kn/m
Moment on side beam = 194.985 Kn-m/m
* 3.000 Kn-m/m
Length of cantilever from barrel = 0.400 m
Load on barrel = 215.900 Kn/m
* 4.000 Kn/m
Live load :
Length of cantilever from side beam = 0.850 m
Load on side beam = 8.500 Kn/m
* 9.000 Kn/m
Moment on side beam = 3.613 Kn-m/m
* 4.000 Kn-m/m
Length of cantilever from barrel = 0.400 m
Load on barrel = 4.000 Kn/m
 * 4.500 Kn/m
III. AT Service openings
Length of cantilever from barrel = 1.090 m
Load on barrel = 588.328 Kn/m
* 9.000 Kn/m
b. At +120.00 LVL
Loads Same as +115.50 LVL
c. At +124.35 LVL
I. Three sides supported slab at stair case
Loads Same as +115.50 LVL
II. AT BFV Foundation opening
Dead load :
Length of cantilever from side beam = 0.850 m
Load on side beam = 458.788 Kn/m
* 7.000 Kn/m
Moment on side beam = 194.985 Kn-m/m
* 3.000 Kn-m/m
Length of cantilever from Beam(Parallel to barrel) = 1.650 m
Load on barrel = 890.588 Kn/m
* 13.500 Kn/m
Moment on side beam = 734.735 Kn-m/m
* 12.000 Kn-m/m
Live load :
Length of cantilever from side beam = 0.850 m
Load on side beam = 8.500 Kn/m
* 9.000 Kn/m
Moment on side beam = 3.613 Kn-m/m
* 4.000 Kn-m/m
Length of cantilever from Beam(Parallel to barrel) = 1.650 m
Load on barrel = 16.500 Kn/m
* 17.000 Kn/m
Moment on side beam = 13.613 Kn-m/m
* 14.000 Kn-m/m
 SLABS
DESIGN
 SLAB DESIGN DETAILS
LVL +115.5/ +120.00
Slab = S1
Fy = 415 N/mm² Ly = 6.883 m (clear span)
Fck = 25 N/mm² Lx = 6.570 m (clear span)
Clear-cover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 7.105 m
Floor finishes(50+12) 1.50 Lex = 6.776 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.049
Edge Condition = 4
Number of discontinuous edges = 2
Ast Required Ast Provided
Edge Condition= Two Adjacent edges discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.052 63.18 kN-m 841 239 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0388 47.38 kN-m 620 324 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.045 55.42 kN-m 797 252 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.034 41.56 kN-m 587 342 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 130
Pt prov. = 0.52 Modification factor= 2.00
d required = 130.3
d provided = 222.0 O.K

Slab = S2 (Compressor room) Only in +115.50LVL

Fy = 415 N/mm² Ly = 5.275 m (clear span)
Fck = 25 N/mm² Lx = 2.700 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 5.497 m
Floor finishes(50+12) 1.50 Lex = 2.906 m
Sunken weight
Partition wall
live load = 15.00 dx= 222
Total 22.750 kN/m² dy= 206

Ly/Lx = 1.892
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.065 18.85 kN-m 300 670 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0490 14.13 kN-m 300 670 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 10.57 kN-m 300 670 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 7.92 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

 fs =0.58*fy*Astreq/Ast prov. 63
Pt prov. = 0.52 Modification factor= 2.00
d required = 55.9
d provided = 222.0 O.K

Slab = S2 (Compressor room roof slab) +120.000LVL

Fy = 415 N/mm² Ly = 8.180 m (clear span)
Fck = 25 N/mm² Lx = 5.275 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 8.402 m
Floor finishes(50+12) 1.50 Lex = 5.481 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.533
Edge Condition = 3
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One long edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.074 59.28 kN-m 786 256 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0556 44.46 kN-m 580 346 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 29.33 kN-m 408 493 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 22.00 kN-m 303 663 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 122
Pt prov. = 0.52 Modification factor= 2.00
d required = 105.4
d provided = 222.0 O.K

SLAB = S3
Fy = 415 N/mm² Ly = 9.265 m (clear span)
Fck = 25 N/mm² Lx = 6.750 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 9.487 m
Floor finishes(50+12) 1.50 Lex = 6.956 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.364
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.054 69.37 kN-m 930 216 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0404 52.03 kN-m 684 294 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 47.24 kN-m 672 299 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 35.43 kN-m 496 405 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 143
Pt prov. = 0.52 Modification factor = 1.97
d required = 135.9
d provided = 222.0 O.K

SLAB = S4
Fy = 415 N/mm² Ly = 8.835 m (clear span)
Fck = 25 N/mm² Lx = 6.725 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 9.057 m
Floor finishes(50+12) 1.50 Lex = 6.931 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.307
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.052 66.56 kN-m 890 226 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0390 49.92 kN-m 655 307 c/c 175 c/c
12 mm 12 mm
My- = αy*1.5*w*lx² = 0.037 46.90 kN-m 667 170 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 35.17 kN-m 493 229 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 137
Pt prov. = 0.52 Modification factor = 2.00
d required = 133.3
d provided = 222.0 O.K

SLAB = S5 One way slab

Fy = 415 N/mm²
Fck = 25 N/mm²
Clearcover 20 mm
Th. Of the slab 250 mm Hence O.K
Clear span 2.6 m
Eff.span 2.60 + 0.222 = 2.822 m

Taking the lesser value(as per code) lx = 2.822 m

Slab thickness = 250 mm
D.L.of slab = 6.25
Floor finishes (50+12) 1.50
Partition wall =
Live load = 10.00 eff.depth 222
Total 17.750 kN/m²
Ast Required Ast Provided
M=1.5*(W*Lx²/10)= 21.20 kN-m Ast 16 mm Ast 16 mm
Mu/bd2 0.430 pt = 0.122 300 670 c/c 1148.342857 175 c/c
16 mm 16 mm
 Distribution steel=0.12*1000*d/100= 300 670 c/c 175 c/c
Maximum spacing limits
For main bars 3*d (or) 300 mm 666 (or) 300 mm Whichever is less
Provide 16 dia @ 175 mm c/c
For dist. bars 5*d (or) 450 mm 1110 (or) 450 mm Whichever is less
Provide 16 dia @ 175 mm c/c

Check for deflection as per IS:456-2000 (FIG.4)

fs =0.58*fy*Astreq/Ast prov. = 63
Pt prov. = 100* Ast/ = 0.52 Modification factor = 2.00
d required = lx/(k*20) = 70.6
d provided = = 222.0 Hence O.K

SLAB = S6
Fy = 415 N/mm² Ly = 6.300 m (clear span)
Fck = 25 N/mm² Lx = 4.970 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 6.522 m
Floor finishes(50+12) 1.50 Lex = 5.176 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.260
Edge Condition = 3
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One long edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.060 42.82 kN-m 557 360 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0450 32.11 kN-m 414 486 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 26.15 kN-m 362 555 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 19.62 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 87
Pt prov. = 0.52 Modification factor = 2.00
d required = 99.5
d provided = 222.0 O.K

SLAB = S7
Fy = 415 N/mm² Ly = 8.200 m (clear span)
Fck = 25 N/mm² Lx = 4.625 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 8.422 m
Floor finishes(50+12) 1.50 Lex = 4.831 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206
Ly/Lx = 1.743
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.063 39.06 kN-m 507 397 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0471 29.29 kN-m 376 534 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 22.78 kN-m 314 639 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 17.09 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 79
Pt prov. = 0.52 Modification factor = 2.00
d required = 92.9
d provided = 222.0 O.K

SLAB = S8
Fy = 415 N/mm² Ly = 9.165 m (clear span)
Fck = 25 N/mm² Lx = 4.600 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 9.387 m
Floor finishes(50+12) 1.50 Lex = 4.806 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.953
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.066 40.80 kN-m 530 379 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0498 30.60 kN-m 393 511 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 22.55 kN-m 311 646 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 16.91 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 82
Pt prov. = 0.52 Modification factor = 2.00
d required = 92.4
d provided = 222.0 O.K

SLAB = S9
Fy = 500 N/mm² Ly = 6.570 m (clear span)
Fck = 25 N/mm² Lx = 4.467 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 6.792 m
Floor finishes(50+12) 1.50 Lex = 4.673 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.453
Edge Condition = 4
Number of discontinuous edges = 2
Ast Required Ast Provided
Edge Condition= Two Adjacent edges discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.076 44.21 kN-m 479 420 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0570 33.16 kN-m 355 566 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.045 26.36 kN-m 303 663 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.034 19.77 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 90
Pt prov. = 0.52 Modification factor = 2.00
d required = 89.9
d provided = 222.0 O.K

SLAB = S10 Cantilever slabs at BFV Foundation and at Service openings (Max Span Considered)
Fy = 415 N/mm²
Fck = 25 N/mm²
Clear cover 20 mm
Th. Of the slab 250 mm HenceO.K
Clear span 1.1 m
Eff.span 1.10 + 0.222 = 1.322 m
Taking the lesser value(as per code) lx = 1.322 m
Slab thickness = 250 mm
D.L.of slab = 6.25
Floor finishes (50+12) 1.50
Live load = 10.00 eff.depth 222
Total 17.750 kN/m²
Ast Required Ast Provided
M=1.5*(W*Lx²/2)= 23.27 kN-m Ast 16 mm Ast 16
Mu/bd2 0.472 pt = 0.134 300 670 c/c 1148.342857 175
16 mm
Distribution steel=0.12*1000*d/10 300 670 c/c 175
Maximum spacing limits
For main bars 3*d (or) 300 mm 666 (or) 300 mm Whichever is less
Provide 16 dia @ 175 mm c/c
For dist. bars 5*d (or) 450 mm 1110 (or) 450 mm Whichever is less
Provide 16 dia @ 175 mm c/c

Check for deflection as per IS:456-2000 (FIG.4)

fs =0.58*fy*Astreq/Ast prov. = 62.9
Pt prov. = 100* Ast = 0.5 Modification factor = 2
d required = lx/(k*7) = 94.4
d provided = = 222.0 HenceO.K

LVL +124.35
SLAB = S1

Fy = 415 N/mm² Ly = 6.280 m (clear span)

Fck = 25 N/mm² Lx = 5.970 m (clear span)
Clearcover 20 mm
Slab thickness = 250 mm
D.L.of slab = 6.25 Ley = 6.502 m
Floor finishes(50+12) 1.50 Lex = 6.176 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.053
Edge Condition = 4
Number of discontinuous edges = 2
Ast Required Ast Provided
Edge Condition= Two Adjacent edges discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.052 52.84 kN-m 695 289 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0390 39.63 kN-m 514 391 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.045 46.04 kN-m 654 307 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.034 34.53 kN-m 483 416 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 108
Pt prov. = 0.52 Modification factor = 2.00
d required = 118.8
d provided = 222.0 O.K

SLAB = S2
Fy = 415 N/mm² Ly = 7.580 m (clear span)
Fck = 25 N/mm² Lx = 6.280 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 7.802 m
Floor finishes(50+12) 1.50 Lex = 6.486 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.203
Edge Condition = 3
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One long edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.056 63.02 kN-m 839 240 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0422 47.27 kN-m 619 325 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 41.07 kN-m 580 347 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 30.80 kN-m 429 468 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 130
Pt prov. = 0.52 Modification factor = 2.00
d required = 124.7
d provided = 222.0 O.K
SLAB = S3
Fy = 415 N/mm² Ly = 9.265 m (clear span)
Fck = 25 N/mm² Lx = 6.750 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 9.487 m
Floor finishes(50+12) 1.50 Lex = 6.956 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.364
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.054 69.37 kN-m 930 216 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0404 52.03 kN-m 684 294 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 47.24 kN-m 672 299 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 35.43 kN-m 496 405 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 143
Pt prov. = 0.52 Modification factor = 1.97
d required = 135.9
d provided = 222.0 O.K

SLAB = S4
Fy = 415 N/mm² Ly = 8.835 m (clear span)
Fck = 25 N/mm² Lx = 6.725 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 9.057 m
Floor finishes(50+12) 1.50 Lex = 6.931 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.307
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.052 66.56 kN-m 890 226 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0390 49.92 kN-m 655 307 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 46.90 kN-m 667 301 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 35.17 kN-m 493 408 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 137
Pt prov. = 0.52 Modification factor = 2.00
d required = 133.3
d provided = 222.0 O.K
SLAB = S5

Fy = 415 N/mm² Ly = 6.840 m (clear span)

Fck = 25 N/mm² Lx = 6.040 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 7.062 m
Floor finishes(50+12) 1.50 Lex = 6.246 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.131
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.045 47.06 kN-m 616 326 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0340 35.30 kN-m 456 441 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 38.09 kN-m 535 375 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 28.56 kN-m 397 506 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 96
Pt prov. = 0.52 Modification factor = 2.00
d required = 120.1
d provided = 222.0 O.K
SLAB = S6

Fy = 415 N/mm² Ly = 8.770 m (clear span)

Fck = 25 N/mm² Lx = 5.700 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 8.992 m
Floor finishes(50+12) 1.50 Lex = 5.906 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.523
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.058 54.01 kN-m 712 282 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0436 40.51 kN-m 526 382 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 34.05 kN-m 476 422 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 25.54 kN-m 354 568 c/c 175 c/c

Check for deflection as per IS:456-2000

 fs =0.58*fy*Astreq/Ast prov. 110
Pt prov. = 0.52 Modification factor = 2.00
d required = 113.6
d provided = 222.0 O.K

SLAB = S7

Fy = 415 N/mm² Ly = 9.125 m (clear span)

Fck = 25 N/mm² Lx = 4.700 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 9.347 m
Floor finishes(50+12) 1.50 Lex = 4.906 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.905
Edge Condition = 2
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One short edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.066 42.04 kN-m 547 367 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0492 31.53 kN-m 406 495 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 23.50 kN-m 325 619 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 17.62 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 85
Pt prov. = 0.52 Modification factor = 2.00
d required = 94.3
d provided = 222.0 O.K

SLAB = S8

Fy = 415 N/mm² Ly = 8.200 m (clear span)

Fck = 25 N/mm² Lx = 4.600 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 8.422 m
Floor finishes(50+12) 1.50 Lex = 4.806 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.752
Edge Condition = 1
Number of discontinuous edges = 0
Ast Required Ast Provided
Edge Condition= Interior panel Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.059 36.20 kN-m 468 429 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0441 27.15 kN-m 348 578 c/c 175 c/c
 16 mm 16 mm
My- = αy*1.5*w*lx² = 0.032 19.68 kN-m 300 670 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.024 14.76 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 73
Pt prov. = 0.52 Modification factor = 2.00
d required = 92.4
d provided = 222.0 O.K

SLAB = S9

Fy = 415 N/mm² Ly = 5.970 m (clear span)

Fck = 25 N/mm² Lx = 3.670 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 6.192 m
Floor finishes(50+12) 1.50 Lex = 3.876 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.598
Edge Condition = 4
Number of discontinuous edges = 2
Ast Required Ast Provided
Edge Condition= Two Adjacent edges discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.082 32.69 kN-m 421 477 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0613 24.52 kN-m 313 641 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.045 18.13 kN-m 300 670 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.034 13.60 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 66
Pt prov. = 0.52 Modification factor = 2.00
d required = 74.5
d provided = 222.0 O.K

SLAB = S10

Fy = 415 N/mm² Ly = 8.200 m (clear span)

Fck = 25 N/mm² Lx = 4.625 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 8.422 m
Floor finishes(50+12) 1.50 Lex = 4.831 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.743
Edge Condition = 3
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One long edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.082 50.93 kN-m 669 300 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0615 38.20 kN-m 495 406 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 22.78 kN-m 314 639 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 17.09 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 104
Pt prov. = 0.52 Modification factor = 2.00
d required = 92.9
d provided = 222.0 O.K

SLAB = S11

Fy = 415 N/mm² Ly = 6.725 m (clear span)

Fck = 25 N/mm² Lx = 4.655 m (clear span)
Clearcover 20 mm

Slab thickness = 250 mm

D.L.of slab = 6.25 Ley = 6.947 m
Floor finishes(50+12) 1.50 Lex = 4.861 m
Sunken weight
Partition wall
live load = 10.00 dx= 222
Total 17.750 kN/m² dy= 206

Ly/Lx = 1.429
Edge Condition = 3
Number of discontinuous edges = 1
Ast Required Ast Provided
Edge Condition= One long edge discontinuous Ast 16 mm 16 mm
Mx- = αx*1.5*w*lx² = 0.069 43.65 kN-m 569 353 c/c 175 c/c
Mx+ = αx*1.5*w*lx² = 0.0520 32.74 kN-m 422 476 c/c 175 c/c
16 mm 16 mm
My- = αy*1.5*w*lx² = 0.037 23.07 kN-m 318 631 c/c 175 c/c
My+ = αy*1.5*w*lx² = 0.028 17.30 kN-m 300 670 c/c 175 c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. 88
Pt prov. = 0.52 Modification factor = 2.00
d required = 93.5
d provided = 222.0 O.K

SLAB = S12 One way slab

Fy = 415 N/mm²
Fck = 25 N/mm²
Clearcover 20 mm
Th. Of the slab 250 mm Hence O.K
Clear span 3.88 m
Eff.span 3.88 + 0.222 = 4.102 m

Taking the lesser value(as per code) lx = 4.102 m

Slab thickness = 250 mm
D.L.of slab = 6.25
Floor finishes (50+12) 1.50
Partition wall =
Live load = 10.00 eff.depth 222
Total 17.750 kN/m²
Ast Required Ast Provided
M=1.5*(W*Lx²/10)= 44.80 kN-m Ast 16 mm Ast 16 mm
Mu/bd2 0.909 pt = 0.263 585 344 c/c 1148.342857 175 c/c
16 mm 16 mm
Distribution steel=0.12*1000*d/100= 300 670 c/c 175 c/c
Maximum spacing limits
For main bars 3*d (or) 300 mm 666 (or) 300 mm Whichever is less
Provide 16 dia @ 175 mm c/c
For dist. bars 5*d (or) 450 mm 1110 (or) 450 mm Whichever is less
Provide 16 dia @ 175 mm c/c

Check for deflection as per IS:456-2000 (FIG.4)

fs =0.58*fy*Astreq/Ast prov. = 123
Pt prov. = 100* Ast/ = 0.52 Modification factor = 2.00
d required = lx/(k*20) = 102.6
d provided = = 222.0 Hence O.K
Reinforcement
Details of
Columns
 REINFORCEMENT DETAILS OF COLUMNS
Column Length Cross Se ction Grade Reqd Area Group
1 5400 1500 X 1000 M25 13200 13200 C1
2 5400 1500 X 1000 M25 13200 13200 C1
3 5400 1500 X 1000 M25 13200 13200 C1
4 5400 1500 X 1000 M25 13200 13200 C1
5 5400 1500 X 1000 M25 13200 14400 C1
6 5400 1500 X 1000 M25 13200 13200 C1
7 5400 1500 X 1000 M25 13200 13200 C1
8 5400 1500 X 1000 M25 13200 14400 C1
9 5400 1500 X 1000 M25 13200 13200 C1
10 5400 1500 X 1000 M25 13200 13200 C1
11 5400 1500 X 1000 M25 13200 13200 C1
12 5400 1500 X 1000 M25 13200 13200 C1
13 5400 1500 X 1000 M25 13200 13200 C1
14 5400 1500 X 1000 M25 13200 13200 C1
15 5400 1500 X 1000 M25 13200 13200 C1
16 5400 1500 X 1000 M25 13200 13200 C1
17 5400 1500 X 1000 M25 13200 14400 C1
18 5400 1500 X 1000 M25 13200 13200 C1
19 5400 1500 X 1000 M25 13200 13200 C1
20 5400 1500 X 1000 M25 13200 13200 C1
21 5400 1500 X 1000 M25 13200 13200 C1
22 5400 1500 X 1000 M25 13200 13200 C1
23 5400 1500 X 1000 M25 13200 14400 C1
24 5400 1500 X 1000 M25 13200 13200 C1
25 5400 1500 X 1000 M25 13200 13200 C1
26 5400 1500 X 1000 M25 13200 14400 C1
27 5400 1500 X 1000 M25 13200 13200 C1
28 5400 1500 X 1000 M25 13200 13200 C1
29 5400 1500 X 1000 M25 13200 14400 C1
30 5400 1500 X 1000 M25 12000 14400 C1
31 5400 1500 X 1000 M25 13200 13200 C1
32 5400 1500 X 1000 M25 13200 13200 C1
33 5400 1500 X 1000 M25 13200 13200 C1
34 5400 1500 X 1000 M25 13200 13200 C1
35 5400 1500 X 1000 M25 13200 13200 C1
36 5400 1500 X 1000 M25 13200 13200 C1
37 5400 1500 X 1000 M25 13200 14400 C1
38 5400 1500 X 1000 M25 13200 13200 C1
39 5400 1500 X 1000 M25 14400 14400 C1
40 5400 1500 X 1000 M25 13200 13200 C1
41 5400 1500 X 1000 M25 13200 13200 C1
42 5400 1500 X 1000 M25 13200 13200 C1
43 5400 1500 X 1000 M25 13200 13200 C1
44 5400 1500 X 1000 M25 13200 13200 C1
45 5400 1500 X 1000 M25 13200 13200 C1
46 5400 1500 X 1000 M25 13200 13200 C1
47 5400 1000 X 1000 M25 8000 8000 C3
48 5400 1000 X 1000 M25 8000 8000 C3
49 5400 1000 X 1000 M25 8000 8000 C3
50 5400 1000 X 1000 M25 8000 8000 C3
51 5400 1000 X 1000 M25 8000 8000 C3
101 4500 1500 X 1000 M25 13200
102 4500 1500 X 1000 M25 13200
103 4500 1500 X 1000 M25 13200
104 4500 1500 X 1000 M25 13200
105 4500 1500 X 1000 M25 13200
106 4500 1500 X 1000 M25 13200
107 4500 1500 X 1000 M25 13200
108 4500 1500 X 1000 M25 13200
109 4500 1500 X 1000 M25 13200
110 4500 1500 X 1000 M25 13200
111 4500 1500 X 1000 M25 13200
112 4500 1500 X 1000 M25 13200
113 4500 1500 X 1000 M25 13200
114 4500 1500 X 1000 M25 13200
115 4500 1500 X 1000 M25 13200
116 4500 1500 X 1000 M25 13200
117 4500 1500 X 1000 M25 13200
118 4500 1500 X 1000 M25 13200
119 4500 1500 X 1000 M25 13200
120 4500 1500 X 1000 M25 13200
121 4500 1500 X 1000 M25 13200
122 4500 1500 X 1000 M25 13200
123 4500 1500 X 1000 M25 14400
124 4500 1500 X 1000 M25 13200
125 4500 1500 X 1000 M25 13200
126 4500 1500 X 1000 M25 14400
127 4500 1500 X 1000 M25 13200
128 4500 1500 X 1000 M25 13200
129 4500 1500 X 1000 M25 13200
130 4500 1500 X 1000 M25 14400
131 4500 1500 X 1000 M25 13200
132 4500 1500 X 1000 M25 13200
133 4500 1500 X 1000 M25 13200
134 4500 1500 X 1000 M25 13200
135 4500 1500 X 1000 M25 13200
136 4500 1500 X 1000 M25 13200
137 4500 1500 X 1000 M25 13200
138 4500 1500 X 1000 M25 13200
139 4500 1500 X 1000 M25 13200
140 4500 1500 X 1000 M25 13200
141 4500 1500 X 1000 M25 13200
142 4500 1500 X 1000 M25 12000
143 4500 1500 X 1000 M25 13200
144 4500 1500 X 1000 M25 13200
145 4500 1500 X 1000 M25 13200
146 4500 1500 X 1000 M25 13200
147 4500 1000 X 1000 M25 8000
148 4500 1000 X 1000 M25 8000
149 4500 1000 X 1000 M25 8000
150 4500 1000 X 1000 M25 8000
201 4350 1500 X 1000 M25 12000
202 4350 1500 X 1000 M25 13200
203 4350 1500 X 1000 M25 12000
204 4350 1500 X 1000 M25 13200
205 4350 1500 X 1000 M25 13200
206 4350 1500 X 1000 M25 13200
207 4350 1500 X 1000 M25 13200
208 4350 1500 X 1000 M25 13200
209 4350 1500 X 1000 M25 13200
210 4350 1500 X 1000 M25 13200
211 4350 1500 X 1000 M25 13200
212 4350 1500 X 1000 M25 13200
213 4350 1500 X 1000 M25 13200
214 4350 1500 X 1000 M25 13200
215 4350 1500 X 1000 M25 13200
216 4350 1500 X 1000 M25 13200
217 4350 1500 X 1000 M25 13200
218 4350 1500 X 1000 M25 13200
219 4350 1500 X 1000 M25 13200
220 4350 1500 X 1000 M25 13200
221 4350 1500 X 1000 M25 13200
222 4350 1500 X 1000 M25 13200
223 4350 1500 X 1000 M25 13200
224 4350 1500 X 1000 M25 13200
225 4350 1500 X 1000 M25 13200
226 4350 1500 X 1000 M25 12000
227 4350 1500 X 1000 M25 13200
228 4350 1500 X 1000 M25 13200
229 4350 1500 X 1000 M25 13200
230 4350 1500 X 1000 M25 13200
231 4350 1500 X 1000 M25 13200
232 4350 1500 X 1000 M25 13200
233 4350 1500 X 1000 M25 12000
234 4350 1500 X 1000 M25 13200
235 4350 1500 X 1000 M25 13200
236 4350 1500 X 1000 M25 13200
237 4350 1500 X 1000 M25 13200
238 4350 1500 X 1000 M25 13200
239 4350 1500 X 1000 M25 13200
240 4350 1500 X 1000 M25 13200
241 4350 1500 X 1000 M25 13200
242 4350 1500 X 1000 M25 13200
243 4350 1500 X 1000 M25 13200
244 4350 1500 X 1000 M25 13200
245 4350 1500 X 1000 M25 13200
246 4350 1500 X 1000 M25 13200
247 4350 1000 X 1000 M25 8000
248 4350 1000 X 1000 M25 8000
249 4350 1000 X 1000 M25 8000
250 4350 1000 X 1000 M25 8000
251 4350 1000 X 600 M25 4800 4800 C8
252 4350 1000 X 600 M25 4800
253 4350 1000 X 600 M25 4800
254 4350 1000 X 600 M25 4800
255 4350 1000 X 600 M25 4800
256 4350 1000 X 600 M25 4800
257 4350 1000 X 600 M25 4800
301 4150 1500 X 1000 M25 13200
302 4150 1500 X 1000 M25 13200
303 4150 1500 X 1000 M25 12000
304 4150 1500 X 1000 M25 13200
305 4150 1500 X 1000 M25 13200
306 4150 1500 X 1000 M25 13200
307 4150 1500 X 1000 M25 13200
308 4150 1500 X 1000 M25 13200
309 4150 1500 X 1000 M25 13200
310 4150 1500 X 1000 M25 13200
311 4150 1500 X 1000 M25 13200
312 4150 1500 X 1000 M25 13200
313 4150 1500 X 1000 M25 13200
314 4150 1500 X 1000 M25 13200
315 4150 1500 X 1000 M25 13200
316 4150 1500 X 1000 M25 12000
317 4150 1500 X 1000 M25 13200
318 4150 1500 X 1000 M25 13200
319 4150 1500 X 1000 M25 13200
320 4150 1500 X 1000 M25 13200
321 4150 1500 X 1000 M25 13200
322 4150 1500 X 1000 M25 13200
323 4150 1500 X 1000 M25 13200
324 4150 1500 X 1000 M25 13200
325 4150 1500 X 1000 M25 13200
326 4150 1500 X 1000 M25 13200
327 4150 1500 X 1000 M25 13200
328 4150 1500 X 1000 M25 13200
329 4150 1500 X 1000 M25 14400
330 4150 1500 X 1000 M25 12000
331 4150 1500 X 1000 M25 12000
332 4150 1500 X 1000 M25 13200
333 4150 1500 X 1000 M25 13200
334 4150 1500 X 1000 M25 12000
335 4150 1500 X 1000 M25 13200
336 4150 1500 X 1000 M25 13200
337 4150 1500 X 1000 M25 13200
338 4150 1500 X 1000 M25 13200
339 4150 1500 X 1000 M25 13200
340 4150 1500 X 1000 M25 13200
341 4150 1500 X 1000 M25 13200
342 4150 1500 X 1000 M25 13200
343 4150 1500 X 1000 M25 13200
344 4150 1500 X 1000 M25 13200
345 4150 1500 X 1000 M25 13200
346 4150 1500 X 1000 M25 13200
347 4150 1500 X 1000 M25 14400
348 4150 1000 X 1000 M25 8000 8000
349 4150 1000 X 1000 M25 8000 8000
350 4150 1500 X 1000 M25 13200
401 4500 1500 X 1000 M25 13200
402 4500 1500 X 1000 M25 13200
403 4500 1500 X 1000 M25 13200
404 4500 1500 X 1000 M25 13200
405 4500 1500 X 1000 M25 14400
406 4500 1500 X 1000 M25 13200
407 4500 1500 X 1000 M25 13200
408 4500 1500 X 1000 M25 13200
409 4500 1500 X 1000 M25 13200
410 4500 1500 X 1000 M25 13200
411 4500 1500 X 1000 M25 13200
412 4500 1500 X 1000 M25 12000
413 4500 1500 X 1000 M25 13200
414 4500 1500 X 1000 M25 12000
415 4500 1500 X 1000 M25 13200
416 4500 1500 X 1000 M25 13200
417 4500 1500 X 1000 M25 14400
418 4500 1500 X 1000 M25 13200
419 4500 1500 X 1000 M25 13200
420 4500 1500 X 1000 M25 13200
421 4500 1500 X 1000 M25 13200
422 4500 1500 X 1000 M25 13200
423 4500 1500 X 1000 M25 13200
424 4500 1500 X 1000 M25 13200
425 4500 1500 X 1000 M25 13200
426 4500 1500 X 1000 M25 13200
427 4500 1500 X 1000 M25 13200
428 4500 1500 X 1000 M25 13200
429 4500 1500 X 1000 M25 13200
430 4500 1500 X 1000 M25 12000
431 4500 1500 X 1000 M25 12000
432 4500 1500 X 1000 M25 13200
433 4500 1500 X 1000 M25 12000
434 4500 1500 X 1000 M25 13200
435 4500 1500 X 1000 M25 13200
436 4500 1500 X 1000 M25 13200
437 4500 1500 X 1000 M25 14400
438 4500 1500 X 1000 M25 13200
439 4500 1500 X 1000 M25 13200
440 4500 1500 X 1000 M25 12000
441 4500 1500 X 1000 M25 13200
442 4500 1500 X 1000 M25 13200
443 4500 1500 X 1000 M25 13200
444 4500 1500 X 1000 M25 12000
445 4500 1500 X 1000 M25 13200
446 4500 1500 X 1000 M25 13200
447 4500 1500 X 1000 M25 13200
448 4500 1000 X 1000 M25 8000
449 4500 1000 X 1000 M25 8000
450 4500 1500 X 1000 M25 13200
501 5000 1500 X 1000 M25 13200
502 5000 1500 X 1000 M25 13200
503 5000 1500 X 1000 M25 13200
504 5000 1500 X 1000 M25 13200
505 5000 1500 X 1000 M25 14400
506 5000 1500 X 1000 M25 13200
507 5000 1500 X 1000 M25 13200
508 5000 1500 X 1000 M25 14400
509 5000 1500 X 1000 M25 12000
510 5000 1500 X 1000 M25 13200
511 5000 1500 X 1000 M25 12000
512 5000 1500 X 1000 M25 13200
513 5000 1500 X 1000 M25 13200
514 5000 1500 X 1000 M25 13200
515 5000 1500 X 1000 M25 13200
516 5000 1500 X 1000 M25 13200
517 5000 1500 X 1000 M25 13200
518 5000 1500 X 1000 M25 13200
519 5000 1500 X 1000 M25 13200
520 5000 1500 X 1000 M25 13200
521 5000 1500 X 1000 M25 13200
522 5000 1500 X 1000 M25 13200
523 5000 1500 X 1000 M25 13200
524 5000 1500 X 1000 M25 13200
525 5000 1500 X 1000 M25 12000
 526 5000 1500 X 1000 M25 13200
527 5000 1500 X 1000 M25 13200
528 5000 1500 X 1000 M25 12000
529 5000 1500 X 1000 M25 13200
530 5000 1500 X 1000 M25 13200
531 5000 1500 X 1000 M25 13200
532 5000 1500 X 1000 M25 13200
533 5000 1500 X 1000 M25 12000
534 5000 1500 X 1000 M25 13200
535 5000 1500 X 1000 M25 13200
536 5000 1500 X 1000 M25 13200
537 5000 1500 X 1000 M25 13200
538 5000 1500 X 1000 M25 13200
539 5000 1500 X 1000 M25 13200
540 5000 1500 X 1000 M25 13200
541 5000 1500 X 1000 M25 13200
542 5000 1500 X 1000 M25 13200
543 5000 1500 X 1000 M25 13200
544 5000 1500 X 1000 M25 13200
545 5000 1500 X 1000 M25 13200
546 5000 1500 X 1000 M25 13200
547 5000 1500 X 1000 M25 13200
548 5000 1000 X 1000 M25 8000
549 5000 1000 X 1000 M25 8000
550 5000 1500 X 1000 M25 13200
1701 2100 300 X 600 M25 732.24 1440.0 C3
1702 3300 300 X 600 M25 657.24 C3
1703 1392 300 X 600 M25 550.24 C3
1704 3108 300 X 600 M25 478.48 C3
1705 1392 300 X 600 M25 372.73 C3
1706 2958 300 X 600 M25 300.97 C3
1707 5000 300 X 600 M25 201.03 C3
1708 5400 300 X 600 M25 395.35 C3
1709 4500 300 X 600 M25 288.34 C3
1710 4350 300 X 600 M25 185.03 C3
1711 5000 300 X 600 M25 185.03 C3
1712 5400 300 X 600 M25 1440 C3
1713 4500 300 X 600 M25 1440 C3
1714 4350 300 X 600 M25 1440 C3
1715 5000 300 X 600 M25 1440 C3
1716 2100 300 X 600 M25 1440 C3
1717 3300 300 X 600 M25 1440 C3
1718 1392 300 X 600 M25 1440 C3
1719 3108 300 X 600 M25 1440 C3
1720 1392 300 X 600 M25 1440 C3
1721 2958 300 X 600 M25 1440 C3
1722 5000 300 X 600 M25 1440 C3
1723 4176 300 X 600 M25 642.89 C3
1724 1224 300 X 600 M25 558.42 C3
1725 3132 300 X 600 M25 458.36 C3
1726 1368 300 X 600 M25 378.65 C3
1727 3132 300 X 600 M25 278.44 C3
1728 1218 300 X 600 M25 198.73 C3
1729 5000 300 X 600 M25 198.73 C3
1730 5400 300 X 600 M25 344.38 C3
1731 4500 300 X 600 M25 239.94 C3
1732 4350 300 X 600 M25 139.13 C3
1733 5000 300 X 600 M25 139.13 C3
1734 5400 300 X 600 M25 1440 C3
1735 4500 300 X 600 M25 1440 C3
1736 4350 300 X 600 M25 1440 C3
1737 5000 300 X 600 M25 1440 C3
1738 4176 300 X 600 M25 1440 C3
1739 1224 300 X 600 M25 1440 C3
1740 3132 300 X 600 M25 1440 C3
1741 1368 300 X 600 M25 1440 C3
1742 3132 300 X 600 M25 1440 C3
1743 1218 300 X 600 M25 1440 C3
1744 5000 300 X 600 M25 1440 C3
Design of Stair case
 DESIGN OF STAIRCASE

DESIGN OF WAIST SLAB

Grade of concrete = 25 N/mm2
Grade of steel = 415 N/mm2
Thickness of slab = 175 mm
Clear cover = 20 mm
Dia of main reinforcement = 16 mm
Dia of Distribution reinforcement = 8 mm
Tred width = 280 mm
Raiser width = 174 mm
Sloped length = 329.660 mm
Self Wt. of waist slab = 4.20 kN/m2
Self Wt. of slab/ Horizontal meter = 4.94 kN/m2
Floor finish = 1.50 kN/m2
Weight of steps/ horizontal meter = 2.088 kN/m2
Live Load = 4.00 kN/m2
Dead load on mid landing beam = 14.51 kN/m
Live load on mid landing beam = 6.80 kN/m
Total design load = 12.53 k N/m2

Maximum effective span = 3.400 m

Width of Mid landing = 1.500 m
Bending Moment= Wl^2/10 = 14.49 k N-m
factored Moment Mu= = 21.73 k N-m
Factored shear force WL/2 = 31.96 k N
Effective depth “d”= = 79.37 mm
Effective depth provided = 147 mm
Check:-1 Depth is ok
Mu/ bd2= = 1.01
Ast= = 430.61 mm2
Spacing required = 467 mm c/c
Provided spacing = 100 mm c/c
Provided Ast= = 2009.6 mm2
Provided Pt= = 1.367 %
Shear stress Tv = 0.22 N/mm2
Beta value = 2.12333484 -
Shear stress of concrete = 0.71858665 N/mm2
Shear stress of concrete Tc = 0.71858665 N/mm2
Check:-2 Depth is ok
Minimum distribution reinforcement = 176.4 mm2/m
Spacing required = 285 mm c/c
Provided spacing = 200 mm c/c

Check for deflection as per IS:456-2000

fs =0.58*fy*Astreq/Ast prov. = 52 N/mm2
Pt prov = 1.37 %
Modification factor = 2.00 -
d required = 77.0 mm
d provided = 147.0 mm
Check:-3 Depth is ok
 KALESWARAM PROJECT (Dr.BRAPCSS)
PACKAGE-6
LIST OF DRAWINGS

S.NO DRAWING NO Sheet TITLE

1 PCSSP/PKG-6/PH/MH/01 1 of 8 Marking plan of columns and footings
2 PCSSP/PKG-6/PH/MH/01 2 of 8 Details of columns and footings
3 PCSSP/PKG-6/PH/MH/01 3 of 8 Details of combined footing CF1
4 PCSSP/PKG-6/PH/MH/01 4 of 8 BFV Foundation Out line details
5 PCSSP/PKG-6/PH/MH/01 5 of 8 BFV Foundation details
6 PCSSP/PKG-6/PH/MH/01 6 of 8 Lift-1 Pit details
7 PCSSP/PKG-6/PH/MH/01 7 of 8 Lift-2 Pit details
8 PCSSP/PKG-6/PH/MH/01 8 of 8 Details of Gantry column Rock Anchors

9 PCSSP/PKG-6/PH/MH/02 1 of 5 Beam Layout and Rf Details at +115.50 LVL

10 PCSSP/PKG-6/PH/MH/02 2 of 5 Beam Layout and Rf Details at +120.00 LVL
11 PCSSP/PKG-6/PH/MH/02 3 of 5 Beam Layout and Rf Details at +124.350 LVL
12 PCSSP/PKG-6/PH/MH/02 4 of 5 Tie Beam Layout
13 PCSSP/PKG-6/PH/MH/02 5 of 5 Crane Beam and Tie Beam Layout

14 PCSSP/PKG-6/PH/MH/03 1 of 1 Slab Reinforcement Details

15 PCSSP/PKG-6/PH/MH/04 1 of 1 Details of Columns around Barrel @ +124.350LVL

16 PCSSP/PKG-6/PH/MH/05 1 of 1 Auxiliary service bay- Details of columns and footings

17 PCSSP/PKG-6/PH/MH/06 1 of 8 Stair cases at Lift-1 & Lift-2

18 PCSSP/PKG-6/PH/MH/06 2 of 8 Lift Beam Details
19 PCSSP/PKG-6/PH/MH/06 3 of 8 Reinf. Details of staircase at lift-1 (From +110.110 to +115.50)
20 PCSSP/PKG-6/PH/MH/06 4 of 8 Reinf. Details of staircase at lift-1 (From +115.50 to +120.00)
21 PCSSP/PKG-6/PH/MH/06 5 of 8 Reinf. Details of staircase at lift-1 (From +120.00 to +124.350)
22 PCSSP/PKG-6/PH/MH/06 6 of 8 Reinf. Details of staircase at lift-2 (From +110.110 to +115.50)
23 PCSSP/PKG-6/PH/MH/06 7 of 8 Reinf. Details of staircase at lift-2 (From +115.50 to +120.00)
24 PCSSP/PKG-6/PH/MH/06 8 of 8 Reinf. Details of staircase at lift-2 (From +120.00 to +124.350)