Scribd Logo
Upload

Welcome to Scribd!

  • 904 views

    Mercedes W210 Codigos y Valores

    Uploaded by

    Alejandro Moran Alvarez
    The document provides instructions for accessing diagnostic trouble codes (DTCs) and component values for the climate control system in a Mercedes Benz E-Class W210 from 1995. It describes pushing button combinations to enter diagnostic mode, then pressing AUTO to cycle through and view stored error codes and tested component values. Error codes are provided for various sensors and actuators with descriptions of potential issues. Instructions are also given for erasing codes after repairs are completed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Mercedes W210 Codigos y Valores

    Uploaded by

    Alejandro Moran Alvarez
    904 views3 pages
    The document provides instructions for accessing diagnostic trouble codes (DTCs) and component values for the climate control system in a Mercedes Benz E-Class W210 from 1995. It describes pushing button combinations to enter diagnostic mode, then pressing AUTO to cycle through and view stored error codes and tested component values. Error codes are provided for various sensors and actuators with descriptions of potential issues. Instructions are also given for erasing codes after repairs are completed.

    Original Description:

    W210 Codigos

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for accessing diagnostic trouble codes (DTCs) and component values for the climate control system in a Mercedes Benz E-Class W210 from 1995. It describes pushing button combinations to enter diagnostic mode, then pressing AUTO to cycle through and view stored error codes and tested component values. Error codes are provided for various sensors and actuators with descriptions of potential issues. Instructions are also given for erasing codes after repairs are completed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    904 views3 pages

    Mercedes W210 Codigos y Valores

    Uploaded by

    Alejandro Moran Alvarez
    The document provides instructions for accessing diagnostic trouble codes (DTCs) and component values for the climate control system in a Mercedes Benz E-Class W210 from 1995. It describes pushing button combinations to enter diagnostic mode, then pressing AUTO to cycle through and view stored error codes and tested component values. Error codes are provided for various sensors and actuators with descriptions of potential issues. Instructions are also given for erasing codes after repairs are completed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    I can tell you one more secres!

    Start engine
    Left side: HI
    Right side: LO
    Then push together EC and REST, and wait for a 10 secs, the
    climate shuts off, then press right "AUTO" and it will show you
    your errors, to see next error press one more time "AUTO", to
    erase errors press both AUTO buttons and wait for a 10 secs.
    A little bit about errors:

    210 Chassis from 9/95


    READING ACTUAL VALUES
    1. IGNITION : Position 1
    2. Press the AUTO button
    3. Set both temperature selectors to 72 degrees F.
    4. Press the REST button for more than 5 seconds.
    5. The left display will alternately show the number "1" and the in-
    car temperature.
    6. Press the AUTO button and the next component number and its
    value will be displayed.
    7. Press the REST button to end the test program.
    COMPONENT UNDER TEST
    Number Component
    01 In-Car Temperature Sensor with Aspirator Blower (B10/4)
    02 Outside Temperature Sensor (B14)
    03 Left Heater Core Temperature Sensor (B10/1)
    04 Right Heater Core Temperature Sensor (B10/1)
    05 Evaporator Temperature Sensor (B10/6)
    06 Engine Coolant Temperature (ECT) Sensor (A/C) (B1/4)
    07 Refrigerant Pressure in Bar
    08 Refrigerant Temperature Sensor (B12/1)
    10 Blower Control Voltage
    11 Emissions (Refrigerant Leak) Sensor (B31)
    12 Sun (Excessive Heat) Sensor (B32)
    20 Control Current for Auxiliary Fan exp. : 7 = 7 mA
    21 Engine RPM. example 00..99 (x100) = 9900
    22 Vehicle Speed
    23 PIN 58D exp. 99.0 = 99% of Battery Voltage
    24 Battery Voltage : 12.8 = 12,8 Volt
    40 Software Version Encoded
    41 Hardware Version

    210 Chassis from 9/95


    FAULT DIAGNOSIS
    1. IGNITION : Position 1
    2. Left Temperature selector wheel : HI
    Right Temperature selector wheel : LO
    3. Within 20 seconds press the REST and EC buttons
    simultaneously for more than 5 seconds.
    4. The LED in the RECIRCULATE button flashes and "dI R" appears
    on the display
    5. Press the right AUTO button until all DTC's are displayed and
    recorded.
    6. To erase, all codes must be read out. Press both AUTO buttons
    simultaneously for more than 2 seconds. "d" will be displayed
    on the left and "FF" is displayed on the right. The erase can be
    canceled by pressing the AUTO.
    7. Reset temperature selector to normal setting.
    8. IGNITION : OFF to end the test program.
    FAULT CODES - 210 Chassis from 9/95
    DTC Readout Description
    026 CAN - Communication
    226 In-Car Air Temperature Sensor (B10/4)
    227 Outside Air Temperature Sensor (B14)
    228 Left Heater Core Temperature Sensor (B10/1)
    229 Right Heater Core Temperature Sensor (B10/1)
    230 Evaporator Temperature Sensor (B10/6)
    231 Engine Coolant Temperature Sensor (B10/
    232 Refrigerant Pressure Sensor (B12)
    233 Refrigerant Temperature Sensor (B12/1)
    234 Sun Sensor (B32)
    235 Emissions (Refrigerant Leak) Sensor (B31)
    241 Refrigerant Level
    416 Coolant Circulation Pump (M13)
    417 Left Duovalve (Water Valve) (Y21y1)
    418 Right Duovalve (Water Valve) (Y21y2)
    419 A/C Compressor Electromagnetic Clutch (A9k1)
    420 Closed (Idle) Throttle Speed Increase
    421 Pulse Module
    422 Serial Interface Connection (K1) to Instrument Cluster (IC)
    423 Switchover Valve Block (Y11)
    424 Activated Charcoal Filter Actuator (A32m2) : OPEN
    425 Activated Charcoal Filter Actuator (A32m2) : CLOSE
    432 Maximum Heat
    459 Serial Interface Connection (K2) to Instrument Cluster (IC)
    462 Wide Open Throttle (WOT) Position Signal - Diesel Engine Only

    Read more: http://mbworld.org/forums/e-class-w210/195895-


    e430-98-problem-air-conditioner.html#ixzz3K32HH5hv

    You might also like