Installation Manual

The document provides installation instructions for several automotive software programs: 1. ZF Elcat requires running setup.exe from disc 1, entering registration details, choosing administrator installation, inserting disc 2 during installation, and copying a file after completion. 2. ZF Lessis instructions say to download an .exe file, provide two serial numbers, install the program, start it to request an answer code, and set the date before running. 3. Alldata 10.50 requires running SETUP.exe from the install disc, downloading and running a patch file while providing fingerprint details and entering an answer code, and then the software can be used. Hard drive installation steps are also provided.

Uploaded by

Hida Q

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

101 views2 pages

Installation Manual

Uploaded by

Hida Q

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 2

Installation manual

ZF Elcat

http://www.autoepc.net/uploads/instructions/1205094037/version.dat

1. Start from CD1 file setup.exe from a folder inst0104.

2. Enter any Name and Company.
3. Enter serial: MP00007667010850.
4. Choose type of installation - Administrator.
5. In a following window specify a folder for installation ZF. After pressing Next press YES.
6. During installation we insert a disk 2.
7. After the ending of installation sent file Version.dat in a folder with the installed program
is copied.

ZF Lessis

http://www.autoepc.net/uploads/instructions/1333969633/patch.exe

I've downloaded the link www.autoepc.net/download/ftp/temp/2013/lessis2.exe,

then how the next step?

1. Serial Number : 1237690

2. Serial Number : 1237634

1.Install program
2.Start program and send me request code. Receive answer code and enter it to program. Do
not close window before you receive answer code.
3.Before run program set system date to 2003 year

Alldata 10.50
Serial nUmber :

019PMJ-U3K4FG-AG73M6-9817WZ-GUW7RF-KV7AVG-YR2Q04-XP4VB8-XC3F5M-Z1R6A5

1. Run from install Cd SETUP.EXE and install program.

2. Download patch www.autoepc.net/download/ftp/temp/patch.rar and run it, send us your
fingerprint and enter answer code, run patch again
3. You can work.

To install all data to hard drive and to work without DVD do:
1. Open file ACE.INI by Notepad.
2. In topic - [DeviceWindow] add -

Device_0=c:\\\\DVD1,0
Device_1=c:\\\\DVD2,0
Device_2=c:\\\\DVD3,0
Device_3=c:\\\\DVD4,0
Device_4=c:\\\\DVD5,0
Device_5=c:\\\\DVD6,0
Device_6=c:\\\\DVD7,0
Device_7=c:\\\\DVD8,0
Device_8=c:\\\\DVD9,0

etc.

Copy Import1a and Import1b to folder DVD1,

Import2a and Import2b to folder DVD2 e.t.c.

If folders has another names or pathes - correct.

http://www.autoepc4you.com/catalog/view/ZF-Elcat
>> http://www.autoepc4you.com/catalog/view/ZF-Lessis
>> http://www.autoepc4you.com/catalog/view/Toyota-Land-Cruiser-Station-Wagon1998-2007-Service-Manual
>> http://www.autoepc4you.com/catalog/view/Alldata-10.50%3A-Full-Set-on-DVD-DL