h2020 wp1820 Energy - en PDF

EN
Horizon 2020
Work Programme 2018-2020
10. Secure, clean and efficient energy
IMPORTANT NOTICE ON THIS WORK PROGRAMME

This Work Programme covers 2018, 2019 and 2020. The parts of the Work Programme that
relate to 2019 (topics, dates, budget) have, with this revised version, been updated. The
changes relating to this revised part are explained on the Participant Portal. The parts that
relate to 2020 are provided at this stage on an indicative basis. Such Work Programme parts
will be decided during 2019.
(European Commission Decision C(2018)4708 of 24 July 2018)

Horizon 2020 - Work Programme 2018-2020
Secure, clean and efficient energy
Table of contents
Introduction ....................................................................................................... 10
Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT FUTURE:

SECURE, CLEAN AND EFFICIENT ENERGY .......................................... 14
Energy efficiency .................................................................................................................... 14

Upgrading buildings' energy performance and smartness.................................................... 15
LC-SC3-EE-1-2018-2019-2020: Decarbonisation of the EU building stock: innovative
approaches and affordable solutions changing the market for buildings renovation .......... 16
LC-SC3-EE-2-2018-2019: Integrated home renovation services ........................................ 17
LC-SC3-EE-3-2019-2020: Stimulating demand for sustainable energy skills in the
construction sector ................................................................................................................ 19
LC-SC3-EE-4-2019-2020: Upgrading smartness of existing buildings through innovations
for legacy equipment ............................................................................................................ 21
LC-SC3-EE-5-2018-2019-2020: Next-generation of Energy Performance Assessment and
Certification .......................................................................................................................... 23
Energy efficient industry and services ................................................................................. 26
LC-SC3-EE-6-2018-2019-2020: Business case for industrial waste heat/cold recovery .... 26
LC-SC3-EE-8-2018-2019: Capacity building programmes to support implementation of
energy audits ........................................................................................................................ 30
Energy efficiency is an investment ...................................................................................... 32
LC-SC3-EE-9-2018-2019: Innovative financing for energy efficiency investments .......... 32
LC-SC3-EE-10-2018-2019-2020: Mainstreaming energy efficiency finance ..................... 34
LC-SC3-EE-11-2018-2019-2020: Aggregation - Project Development Assistance ............ 36
Energy efficiency is an energy source .................................................................................. 38
LC-SC3-EE-13-2018-2019-2020: Enabling next-generation of smart energy services
valorising energy efficiency and flexibility at demand-side as energy resource ................. 38
LC-SC3-EE-14-2018-2019-2020: Socio-economic research conceptualising and modelling
energy efficiency and energy demand .................................................................................. 41
Support for policy-driven innovations ................................................................................. 43
LC-SC3-EE-15-2018: New energy label driving and boosting innovation in products
energy efficiency .................................................................................................................. 43
LC-SC3-EE-16-2018-2019-2020: Supporting public authorities to implement the Energy
Union .................................................................................................................................... 45
LC-SC3-EE-17-2019: European City Facility - European cities as key innovation hubs to
unlock finance for energy efficiency .................................................................................... 47
LC-SC3-EE-18-2019: Bioclimatic approaches for improving energy performance in
buildings in Africa and Europe ............................................................................................ 50
Global leadership in renewables ........................................................................................... 52
Part 10 - Page 2 of 213

Next Renewable energy solutions ........................................................................................ 54

LC-SC3-RES-1-2019-2020: Developing the next generation of renewable energy
technologies .......................................................................................................................... 54
LC-SC3-RES-2-2018: Disruptive innovation in clean energy technologies ....................... 55
LC-SC3-RES-29-2019: Converting Sunlight to storable chemical energy ......................... 57
Renewable energy solutions for implementation at consumer scale .................................... 59
LC-SC3-RES-4-2018: Renewable energy system integrated at the building scale ............. 59
LC-SC3-RES-5-2018: Increased performance of technologies for local heating and cooling
solutions ............................................................................................................................... 60
LC-SC3-RES-6-2018: Demonstrate significant cost reduction for Building Integrated PV
(BIPV) solutions ................................................................................................................... 61
LC-SC3-RES-7-2019: Solar Energy in Industrial Processes ............................................... 62
LC-SC3-RES-8-2019: Combining Renewable Technologies for a Renewable District
Heating and/or Cooling System ........................................................................................... 63
Renewable energy solutions for energy system level implementation ................................ 64
LC-SC3-RES-11-2018: Developing solutions to reduce the cost and increase performance
of renewable technologies .................................................................................................... 64
LC-SC3-RES-12-2018: Demonstrate highly performant renewable technologies for
combined heat and power (CHP) generation and their integration in the EU's energy system
.............................................................................................................................................. 65
LC-SC3-RES-13-2018: Demonstrate solutions that significantly reduce the cost of
renewable power generation................................................................................................. 66
LC-SC3-RES-14-2019: Optimising manufacturing and system operation .......................... 67
LC-SC3-RES-15-2019: Increase the competitiveness of the EU PV manufacturing industry
.............................................................................................................................................. 68
LC-SC3-RES-16-2019: Development of solutions based on renewable sources that provide
flexibility to the energy system ............................................................................................ 69
LC-SC3-RES-17-2019: Demonstration of solutions based on renewable sources that
provide flexibility to the energy system ............................................................................... 70
LC-SC3-RES-30-2019: Demonstration of plug and play solutions for renewable off-grid
electricity .............................................................................................................................. 71
Renewable Fuels for transport.............................................................................................. 73
LC-SC3-RES-21-2018: Development of next generation biofuels and alternative renewable
fuel technologies for road transport ..................................................................................... 73
LC-SC3-RES-22-2018: Demonstration of cost effective advanced biofuel pathways in
retrofitted existing industrial installations ............................................................................ 74
LC-SC3-RES-23-2019: Development of next generation biofuel and alternative renewable
fuel technologies for aviation and shipping ......................................................................... 74
LC-SC3-RES-24-2019: Boosting pre-commercial production of advanced aviation biofuels
.............................................................................................................................................. 75
Market Uptake Support ........................................................................................................ 76
LC-SC3-RES-28-2018-2019-2020: Market Uptake support ............................................... 76
Smart and clean energy for consumers ................................................................................ 78

LC-SC3-EC-1-2018-2019-2020: The role of consumers in changing the market through

informed decision and collective actions ............................................................................. 79
LC-SC3-EC-2-2018-2019-2020: Mitigating household energy poverty ............................. 82
LC-SC3-EC-3-2020 - Consumer engagement and demand response .................................. 83
Smart citizen-centred energy system .................................................................................... 83

LC-SC3-ES-1-2019: Flexibility and retail market options for the distribution grid ............ 86
LC-SC3-ES-2-2019: Solutions for increased regional cross-border cooperation in the
transmission grid .................................................................................................................. 88
LC-SC3-ES-3-2018-2020: Integrated local energy systems (Energy islands) ..................... 90
LC-SC3-ES-4-2018-2020: Decarbonising energy systems of geographical Islands ........... 92
LC-SC3-ES-5-2018-2020: TSO – DSO – Consumer: Large-scale demonstrations of
innovative grid services through demand response, storage and small-scale (RES)
generation ............................................................................................................................. 93
LC-SC3-ES-6-2019: Research on advanced tools and technological development ............ 96
LC-SC3-ES-7-2018: Pan-European Forum for R&I on Smart Grids, Flexibility and Local
Energy Networks .................................................................................................................. 98
LC-SC3-ES-8-2019: European Islands Facility - Unlock financing for energy transitions
and supporting islands to develop investment concepts ..................................................... 100
LC-SC3-ES-9-2019: ERA-NET Co-Fund Enhanced cooperation in Digitalisation of Energy
Systems and Networks ....................................................................................................... 103
Smart Cities and Communities ........................................................................................... 105

LC-SC3-SCC-1-2018-2019-2020: Smart Cities and Communities ................................... 105
Enabling near-zero CO2 emissions from fossil fuel power plants and carbon intensive
industries ............................................................................................................................... 109
LC-SC3-NZE-1-2018: Advanced CO2 capture technologies ............................................ 110
CE-SC3-NZE-2-2018: Conversion of captured CO2......................................................... 111
LC-SC3-NZE-3-2018: Strategic planning for CCUS development ................................... 112
LC-SC3-NZE-4-2019: Integrated solutions for flexible operation of fossil fuel power plants
through power-to-X-to-power and/or energy storage ........................................................ 113
LC-SC3-NZE-5-2019-2020: Low carbon industrial production using CCUS................... 114
LC-SC3-NZE-6-2020: Geological Storage Pilots .............................................................. 115
Joint Actions ......................................................................................................................... 115

LC-SC3-JA-1-2018: Joint programming actions to foster innovative energy solutions .... 116
LC-SC3-JA-2-2018-2019: Support to the realisation of the Implementation Plans of the
SET Plan ............................................................................................................................. 118
LC-SC3-JA-3-2019: European Pre-Commercial Procurement Programme for Wave Energy
Research &Development .................................................................................................... 120
LC-SC3-JA-4-2018: Support action in preparation of a Joint Programming activity ....... 121
LC-SC3-JA-5-2020: Joint Programming with EU and African partners for a R&I actions in
the area of renewable energy .............................................................................................. 123

Cross-cutting issues .............................................................................................................. 123

LC-SC3-CC-1-2018-2019-2020: Social Sciences and Humanities (SSH) aspects of the
Clean-Energy Transition .................................................................................................... 123
LC-SC3-CC-2-2018: Modelling in support to the transition to a Low-Carbon Energy
System in Europe ............................................................................................................... 125
LC-SC3-CC-3-2019: Support for the opening of low-carbon energy research databases in
Europe ................................................................................................................................ 127
LC-SC3-CC-4-2018: Support to sectorial fora .................................................................. 129
LC-SC3-CC-5-2018: Research, innovation and educational capacities for energy transition
............................................................................................................................................ 131
LC-SC3-CC-6-2018: Transition in coal intensive regions ................................................. 132
Conditions for the Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT

FUTURE: SECURE, CLEAN AND EFFICIENT ENERGY .......................................... 134
NEXT-GENERATION BATTERIES ........................................................... 146
TRANSFORMING THE ENERGY SECTOR THROUGH

DIGITISATION .............................................................................................. 147
Other actions .................................................................................................... 149
Horizon Prizes ...................................................................................................................... 149

1. Horizon prizes launched under the Work Programme 2016-2017 of the Horizon 2020
Societal Challenge "Clean Secure and efficient energy" (SC3) ......................................... 149
2. RESponsible Island - Prize for a renewable geographic energy island ......................... 149
Grants to identified beneficiaries ........................................................................................ 152

1. Fostering transnational cooperation between National Contact Points (NCP) in the area
of Energy: follow-up project .............................................................................................. 152
2. 5th Concerted Action on the Energy Performance of Buildings Directive support to
Member States and participating countries for the implementation of the EPBD ............. 154
3. Support for a Member States’ concerted market surveillance action on EU product
energy efficiency legislation .............................................................................................. 157
4. Support to the coordination of national research and innovation programmes in the areas
of activities of the European Energy Research Alliance (EERA) ..................................... 162
5. Support to the initiative on sustainable energy in the defence and security sector ........ 163
6. Support to the Austrian Presidency Conference on the European Strategic Technology
Plan (SET-Plan) 2018......................................................................................................... 164
7. Support to disruptive innovation in clean energy technologies ..................................... 165
8. Contribution to the IEA & Energy Transition Support .................................................. 166
9. Support to the Romanian Presidency Conference on the European Strategic Technology
Plan (SET-Plan) 2019 with a focus on regional dimension ............................................... 167

10. Support to the Finish Presidency Conference on the European Strategic Technology
Plan (SET-Plan) 2019......................................................................................................... 168
11. Technical assistance to assess renewable energy potential in Central and South-Eastern
Countries (CESEC region) ................................................................................................ 168
Public procurements ............................................................................................................ 170

1. Provision of technical assistance, IT tools, modelling and/or studies to collect and
analyse relevant data and to properly assess complex technical, environmental, economic,
legal and social aspects of energy efficiency ..................................................................... 170
2. Study on the role of smart technologies in residential buildings ................................... 170
3. Multiple Framework contract with reopening of competition for qualified legal, technical
and economic expertise in the field of Energy Efficiency to support the Commission in the
design, preparation and proper implementation of EU initiatives and legislation in the area
of Energy Efficiency ......................................................................................................... 171
4. Technical support for renewable heating and cooling ................................................... 171
5. Provision of technical assistance and/or studies to support the implementation of the
heating and cooling strategy .............................................................................................. 172
6. Product registration database at EU level ..................................................................... 173
7. Support for the development and implementation of the EU Energy Star Programme
including maintenance of the website, development of new technical specifications, impact
analysis and market penetration survey ............................................................................ 173
8. Technical assistance for communication and evaluation purposes related to energy
efficiency ............................................................................................................................ 174
9. Support to Smart finance for smart buildings initiative ................................................. 174
10. Tender on "Energy Efficiency Finance Market Place" ................................................ 175
11. Assessment of Finance projects covering PDA, De-risking and Innovative Finance .. 175
12. Evaluation of projects in Industry area ........................................................................ 176
13. EASME external communication activities (publications, audiovisual, events) ......... 176
14. Support to Research and Innovation Policy in the areas of Renewable Energy, Carbon
Capture and Storage and More Efficient Coal Combustion ............................................... 176
15. Dissemination and information activities ..................................................................... 177
16. Information services for energy research and innovation policy development ........... 178
17. Information, communication and logistic support for EU #1 in RES .......................... 178
18. Support services for exploitation of research results (SSERR) .................................... 178
19. Assessment of the impacts of EU-funded RD&D projects in the area of fuel cells and
hydrogen ............................................................................................................................. 179
20. Contest implementation, management and communication services related to the
second and third Phase of the international Mission Innovation Prize Program................ 179
21. Assessment of advanced biofuels, including deployment potential of new/ appearing
feedstocks, feedstock availability, resource competition, and sustainability issues in the
context of the Renewable Energy Directive Article 3(4) ................................................... 180
22. Assessment of carbon fuels produced from fossil waste streams, including deployment
potential, resource competition and decarbonisation potential .......................................... 180
23. Technical requirements for track and trace databases .................................................. 181

24. Support for the implementation of the ILUC- Directive .............................................. 181
25. Technical assistance for the implementation of the EU bioenergy sustainability criteria
............................................................................................................................................ 182
26. Supply side flexibility of combined renewable energy systems (non-variable and
variable). Assessment of development, barriers and regulatory aspects of combined RES
supply systems of gaseous renewable fuels and variable RES .......................................... 182
27. Technical support for RES policy development and implementation .......................... 183
28. Support for policy and market development for alternative and renewable transport
fuels and products............................................................................................................... 183
29. Analysis of actual land availability in the EU; trends in changes (abandoned land, low
fertility land, saline land etc.) and options for energy crop utilisation ............................... 184
30. Support for the planning and deployment of efficient, low carbon District Heating and
Cooling in cities ................................................................................................................. 184
31. Research & Innovation communication activities ...................................................... 185
32. Support Services for the Covenant of Mayors for Climate and Energy ...................... 186
33. Innovation, fair transition and sustainable growth in coal and carbon intensive regions
in the context of the clean energy transition (technical assistance) ................................... 187
34. Support to the European Innovation Partnership on Smart Cities and Communities and
its Market Place .................................................................................................................. 188
35. Innovative assessment of macro-economic impacts of EU energy transition .............. 189
36. Removing barriers to Green Growth by assessment scale and impact of subsidies in all
energy sectors of the EU .................................................................................................... 189
37. Extension of METIS gas/electricity markets and systems model ................................ 190
38. 2020 Renewable energy progress report ..................................................................... 191
39. Support to the realisation of Implementation Plans of the SET Plan ........................... 191
40. Information, dissemination and logistic support for EU in Mission Innovation .......... 192
41. Website for directing potential innovators to the most appropriate public funding
instruments available to support clean energy projects ...................................................... 193
42. Provision of technical assistance and study to support the development of a composite
indicator to track clean-energy innovation performance of EU members ......................... 193
43. Technical and legal assistance to facilitate regional cooperation on deploying renewable
energies among EU Member States ................................................................................... 194
44. Support for the creation of a multi-disciplinary innovations analysis for the energy
transition ............................................................................................................................. 195
Provision of technical/scientific services by the Joint Research Centre .......................... 195

1. Administrative arrangement with the JRC, to provide Technical assistance on GHG
emission saving criteria for biofuels and biomass fuels ..................................................... 195
Delegation Agreements ........................................................................................................ 196

1. ELENA (European Local Energy Assistance) ............................................................... 196
Specific Grant Agreements .................................................................................................. 199

1. Technical support to stakeholders on standardisation work for energy related products

............................................................................................................................................ 199
2. Support to European Standardisation Organisations on standardisation work for energy
related products .................................................................................................................. 199
3. Standardisation request to the CEN for algae and algae-based products in support of the
implementation of the RED II Proposal ............................................................................. 200
4. Support to European Standardisation Organisations for biomethane injection in the grid
in support of the implementation of the RED II Proposal .................................................. 200
5. Support to European Standardisation Organisations for Ethanol 20/25 blends in petrol in
support of the implementation of the RED II .................................................................... 201
6. Support to European Standardisation Organisations for petrol/ethanol blends in diesel in
support of the implementation of the RED II Proposal ...................................................... 201
Financial Instruments .......................................................................................................... 202

1. Support to first-of-a-kind renewable energy projects..................................................... 202
Subscriptions......................................................................................................................... 203
1. Annual subscription to the International Partnership for Energy Efficiency Cooperation
(IPEEC) .............................................................................................................................. 203
2. Contribution to Technology Collaboration Programmes (TCPs) of the International
Energy Agency (IEA) ......................................................................................................... 204
3. Contribution to the International Renewable Energy Agency (IRENA) ....................... 205
4. Contribution to the Secretariat of the Clean Energy Ministerial (CEM) ....................... 205
Expert contracts ................................................................................................................... 206

1. External expertise ........................................................................................................... 206
CALLS AND OTHER ACTIONS for 2020 .................................................. 207
Indicative topics for 2020 ..................................................................................................... 207
Other Actions for 2020 ......................................................................................................... 208

1. Monitoring and assessment of the performance indicators of renewable energy,
investment and RES market trends in Europe .................................................................... 208
2. Study on the impact of projects funded under the Horizon 2020 Energy Challenge ..... 208
3. Continuation of the Building Stock Observatory and production of relevant bottom-up
statistical data on buildings ................................................................................................ 208
4. Support facility for public authorities ............................................................................ 208
5. Energy system modelling ............................................................................................... 209
6. Support to R&I Strategy and feedback to policy in the field of electricity networks and
local energy systems ........................................................................................................... 209
7. Smart Cities and Communities information system ....................................................... 209
8. Research oriented data sets and open access database ................................................... 209
9. Operation, maintenance, improvement and promotion of the BUILD UP interactive web
portal................................................................................................................................... 209

10. Studies on the EU energy system in support of policy ................................................ 210

11. Concerted Action supporting the transposition and implementation of the recast
Renewables Directive ......................................................................................................... 210
12. Concerted Action on the Energy Efficiency Directive support to Member States and
participating countries for the implementation of the EED ............................................... 210
13. Administrative arrangement with the JRC, to implement the relevant provisions of
Energy Efficiency related Directives or Regulations, including Directive 2012/27/EU and
the EPBD ............................................................................................................................ 210
14. Technical and scientific assistance to the Covenant of Mayor by JRC........................ 210
Budget ............................................................................................................... 211

Introduction
The Energy Union, one of the ten priorities of the Juncker Commission, is the EU's major
vector for and contribution to a global transition to a climate-neutral economy. The 2015 Paris
Agreement, which the EU helped broker, set a clear and ambitious direction of travel for
investment into low-carbon innovation. The clean energy transition will help modernise the
European economy and thus contribute to both growth and job creation. The Commission has
proposed a number of measures to achieve this goal, most recently the 'Clean Energy for all
Europeans' package of measures of November 2016 which pursues three overarching goals:
(i) energy efficiency first, (ii) Europe as a leader in renewables, and (iii) a fair deal to
consumers. The Research, Innovation and Competitiveness component of this package is
presented in the Communication on "Accelerating Clean Energy Innovation" (ACEI) 1.
This work programme part supports research, demonstration, innovation and market-uptake
actions across different low-carbon energy sectors, notably in the core priorities identified in
the Energy Union Strategy2: renewable energy; smart energy systems; energy efficiency; and,
as an additional priority, Carbon Capture Utilization and Storage (CCUS). Within these areas,
a special focus is put on three of the four strategic research and innovation priorities
highlighted in the ACEI Communication which are primarily addressed by the "Secure, Clean
and Efficient Energy" Societal Challenge of Horizon 2020 – decarbonising the EU building
stock by 2050; strengthening EU leadership on renewables; and developing affordable and
integrated energy storage solutions3. The context for operationalising and implementing these
priorities, as well as other relevant issues addressed in this work programme part, is the EU
Strategic Energy Technology Plan (SET Plan). It seeks to maximise synergies between EU
and national public R&I support for clean energy, and to leverage private funding, for
priorities across 10 key actions which cover those identified in the ACEI Communication.
At the international level, the Commission pushes the acceleration of energy innovation
through the Mission Innovation Initiative 4 which was launched at COP21 and currently
comprises 23 members which together account for the largest part of the global CO2
emissions and clean energy R&I efforts. This work programme part includes a number of
specific actions5 which directly target an increased international cooperation of EU Member
States and Associated Countries in the context of Mission Innovation. This also includes, in
line with the spirit of the Paris Agreement which emphasises the need for global cooperation
on technology development and transfer, cooperation with African countries on renewable
1
COM (2016) 763
2
COM (2015) 80
3
In line with the commitment in that Communication, more than EUR 2 billion are earmarked across different
work programme parts (mainly Societal Challenge 3, LEIT-NMBP and Societal Challenge 4) for a great number
of topics which address these four priority areas in a comprehensive way.
4
http://mission-innovation.net/about/
5
E.g. topics LC-SC3-RES-1-2019, LC-SC3-RES-3-2020, LC-SC3-RES-4-2018, LC-SC3-RES-5-2018, LC-SC3-
RES-25-2020, LC-SC3-RES-29-2019, LC-SC3-RES-30-2019, LC-SC3-ES-1-2019, LC-SC3-ES-6-2019, LC-
SC3-NZE-2-2018, LC-SC3-NZE-5-2019-2020

energies 6 . In this context, active participation of Outermost Regions could facilitate such
cooperation given their strategic position close to the African continent. A number of topics
included in this work programme are also in line with priorities of IEA Technology
Collaboration Programmes (TCPs) 7 and proposals are invited to explore collaboration and
synergies with TCPs.
In addition to the Energy Union, this work programme part also contributes, inter alia, to the
EU digital single market, the EU transport policy (see the Commission's "Europe on the
move" package, adopted on 31 May 2017), Commission's "Jobs, Growth and Investment"
agenda, its "Blue Growth" initiative, as well as to the EU's research and innovation policy. As
regards the latter, this work programme part fully embraces the "Open Innovation, Open
Science, Open to the World". Activities target a more bottom-up, user-centred energy system
which is a driver for more innovation and made possible thanks to other innovations, notably
the digitisation of core aspects of the energy market. A greater emphasis on open innovation
and open science should lead to more opportunities, especially for smaller companies, to bring
research results to the marketplace.
This work programme part addresses research, innovation and market uptake activities in and
across specific energy sectors as well as activities to maximise synergies between EU and
national public support for clean energy R&I, aiming also at increasing leverage of private
funding. It contributes in its entirety to the Horizon 2020 spending targets on climate action
and sustainable development, addressing in particular the Sustainable Development Goals
(SDGs) 7 ("Ensure access to affordable, reliable, sustainable and modern energy for all"), 11
("Make cities inclusive, safe, resilient and sustainable") and 13 ("Take urgent action to
combat climate change and its impacts").
Efforts to secure Europe's technological leadership must be complemented by substantial

production capabilities and technology supply chains across Europe. Industrial participation in
the programme is therefore crucial.
The transformation of the energy system encompasses technological, societal, cultural,

economic and environmental aspects. In line with the policy priorities, this work programme
part puts a particular emphasis on enabling consumers to actively participate in the energy
transition which is facilitated through the progressing digitisation. In this context, the
integration of different social sciences and humanities fields, as well as a responsible research
and innovation approach8, is of high importance.
The huge majority of activities included in this work programme part contribute to the focus
area "Building a low-carbon, climate resilient future" which pools relevant activities across
different work programmes with the objective to stimulate the development of solutions
capable of achieving carbon neutrality and climate resilience. As regards energy storage, the
Energy Challenge contributes to the call for proposals "Building a low-carbon, climate
6
Topics LC-SC3-JA-4-2018 and LC-SC3-JA-5-2020
7
https://www.iea.org/tcp/
8
http://ec.europa.eu/research/swafs/pdf/rome_declaration_RRI_final_21_November.pdf

resilient future: Next-generation Batteries" (call identifier H2020-LC-BAT-2019-2020) which

is part of the same focus area. In addition, this work programme part also includes activities
which contribute to the focus areas "Connecting economic and environmental gains – the
Circular Economy" and co-funds activities of the focus areas "Digitising and transforming
European industry and services" and "Boosting the effectiveness of the Security Union".
This work programme part incorporates the findings of the Horizon 2020 Interim Evaluation9
- for example, it focusses resources on a more limited number of activities, steps up the
involvement of civil society in R&I activities, and strengthens activities as regards
breakthrough, market-creating innovations.
This work programme part also encourages synergies between Horizon 2020 and other
European Union funds, such as European Structural and Investment Funds (ESIF) that can
increase the impact of both funds in terms of scientific excellence and place-based socio-
economic development respectively10.
The activities in this work programme part will also make the best use of the services offered
by the EU Flagship Programmes on Earth Observation (Copernicus) and on Satellite
Navigation (Galileo and EGNOS11).
The priorities taken up in this work programme part are based on a broad stakeholder
consultation, notably in the context of the SET-Plan 10 key actions12 and the Communication
"Accelerating Clean Energy Innovation", but also through a targeted consultation on policy
supporting actions and market uptake, or inputs from stakeholder associations (e.g. Strategic
Research Agendas of Technology and Innovation Platforms).
Activities specifically targeting Fuel Cells and Hydrogen are not supported under this work
programme part, but through calls for proposals of the Fuel Cells and Hydrogen JU 13 .
However, as regards topics included under the areas "Energy Efficiency", "Smart citizen-
centred energy" and "Smart Cities and Communities", system costs related to the integration
of mature hydrogen based technologies for the purpose of integrated demonstration in a topic
are eligible.
Open research data
Grant beneficiaries under this work programme part will engage in research data sharing by
default, as stipulated under Article 29.3 of the Horizon 2020 Model Grant Agreement
9
https://ec.europa.eu/research/evaluations/index_en.cfm?pg=h2020evaluation
10
Examples are the development and equipment of innovation infrastructures or the fostering of innovation skills
through ESIF that enable the participation in a Horizon2020 project, or the transfer of knowledge and
technologies resulting from Horizon2020 projects to firms that can, thanks to ESIF support, develop it further,
test, prototype, etc. towards innovations fit for market take-up. ESIF can also be used to expand the support and
advisory services for potential Horizon2020 participants. ESIF can also help deploying innovative solutions
emanating from Horizon2020, e.g. through public procurement.
11
Geostationary Navigation Overlay Service
12
https://setis.ec.europa.eu/
13
http://www.fch.europa.eu/

(including the creation of a Data Management Plan). Participants may however opt out of
these arrangements, both before and after the signature of the grant agreement. More
information can be found under General Annex L of the work programme.
Contribution to focus area(s)
Focus Area 'Building a low-carbon, climate resilient future' (LC): EUR 2005.35 million
Focus Area 'Connecting economic and environmental gains - the Circular Economy' (CE):
EUR 12.00 million
Focus Area 'Digitising and transforming European industry and services' (DT): EUR 30.00
million
Focus Area 'Boosting the effectiveness of the Security Union' (SU): EUR 20.00 million

Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT FUTURE:

SECURE, CLEAN AND EFFICIENT ENERGY
H2020-LC-SC3-2018-2019-2020
This call includes the contribution of the Horizon 2020 Societal Challenge "Secure, clean and
efficient energy" to the focus area "Building a low-carbon, climate resilient future" which
underpins the goals of the Paris Agreement and the "Clean Energy for all European"
package, including the Communication "Accelerating Clean Energy Innovation" (COM
(2016) 736) and the SET-Plan priorities, with concrete R&I actions focussing on the
accelerated transformation of the energy system, and other sectors, towards carbon neutrality
and climate resilience. Activities also fully contribute to the Sustainable Development Goals
and the Horizon 2020 spending targets on Sustainable Development and climate action.
Achieving climate neutrality in the energy sector – while ensuring at the same time a more
efficient energy use, a secure supply of energy, affordable prices and low environmental
impact – is a complex endeavour which requires R&I activities on multiple fronts. Activities
supported in this call should deliver:
 on the supply side, cheaper and more performant generation technologies (e.g.
renewable energy technologies) which are better integrated in various levels of the
energy system;
 a smarter, more flexible and resilient energy system (including affordable and integrated
energy storage solutions), taking into account current and future climate change adverse
impacts;
 on the demand side, increased overall energy efficiency (e.g. in the EU's building stock)
and provision of means to enable consumers to play a more active role in the energy
transition;
 a better understanding of the specific socio-economic contexts in which the energy

transition takes place which will allow to address obstacles in a more effective way;
 increased market-uptake of innovations, including the implementation of energy policy,

the preparation for rolling-out investments, and the support for capacity-building.
Energy efficiency
Energy efficiency needs to be considered as a source of energy in its own right. It is one of the
most cost effective ways to support the transition to a low carbon economy, to prompt further
investment opportunities and to create growth and employment. Putting energy efficiency first
will bring down costs for consumers, reduce our import dependency and redirect investments
towards the kind of infrastructure that are smart and sustainable.

An ambitious approach to energy efficiency is needed across all the sectors, but the major
challenge of the next decade – in line with the ACEI priority to decarbonise the EU building
stock by 205014 – lies in buildings. Buildings represent 40% of energy used in the EU and the
construction industry provides 18 million direct jobs in Europe, while SMEs contribute to
70% of the value added in the EU building sector. Renovating buildings adds almost twice as
much value as the construction of new buildings and represents multiple benefits for building
owners, occupants and the whole society. Proper valuation of these multiple benefits,
supported under this call, will help to change business approach to buildings renovation
ensuring flows of financing and massive investments. This, in turn, will improve
living/working conditions of the Europeans, spur economic growth and create jobs.
With the transition to a decentralised and decarbonised energy system, digital smart
technologies will be playing an increasingly important role. Not only that they will enable
buildings and equipment in buildings to become interactive elements by optimising energy
consumption, distributed generation and storage in the home and vis-à-vis the energy system.
They will also trigger new business opportunities and revenue streams for up-graded,
innovative energy services which valorise energy savings and flexible consumption. This call
supports both technology and business development and test it in real market & regulatory
conditions to pave the way towards the uptake of innovative energy services enabled by
energy decarbonisation, decentralisation and digitalisation. That way, active consumers will
not only be able to benefit from cost reductions but also from a bigger variety of services that
bring along a more comfortable, convenient and healthier living environment.
Innovation is however also needed in the financing of energy efficiency where innovative
financing schemes and approaches can help bridge the gap between project development and
financing.
Actions included in this call contribute to the specific objectives, targets and relevant
Implementation Plans15 of the SET Plan action 5.1 and 5.2. In particular, topic LC-SC3-EE-
1-2018-2019-2020 aims at development and deployment of the materials and technologies for
energy efficiency solutions for buildings renovation including renovation of buildings heating
and cooling systems. As regards industrial energy efficiency, topic LC-SC3-EE-6-2018-2019-
2020 has been designed to address the cross-cutting priority of SET Plan Action 6:
maximising the recovery of industrial excess heat/cold in a cost efficient manner. The choice
of a cross-cutting priority rather than a sector-specific one has been taken in order to
maximise EU added value of the funded projects.
Upgrading buildings' energy performance and smartness
Proposals are invited against the following topic(s):
14
COM (2016) 763
15
For further information please consult the SETIS website: https://setis.ec.europa.eu/actions-towards-
implementing-integrated-set-plan

LC-SC3-EE-1-2018-2019-2020: Decarbonisation of the EU building stock: innovative

approaches and affordable solutions changing the market for buildings renovation 16
Specific Challenge: The market for deep renovation of buildings needs to be transformed in
terms of technologies, processes and business models. The multiple benefits of improved
energy efficiency are well known, but more action is needed for Europe to achieve the higher
rates of renovation that would reduce energy use and decarbonize the building stock in order
to meet long-term climate and energy targets. In particular, deep renovations need to become
more attractive to all relevant stakeholders, more reliable in terms of performance, less
disruptive for occupants (especially in residential buildings), less time-consuming, less
energy-intensive from a life cycle perspective, more environmentally friendly regarding
applied materials and more cost-effective. There is a need to demonstrate and roll out holistic
consumer-centred solutions that involve the whole value chain, ensuring high levels of
comfort and a high quality of the indoor environment.
Scope: Proposals should demonstrate solutions addressing building fabric and/or technical
systems that ensure faster and more cost-effective deep renovations that result in high energy
performance. Proposals should include innovations in technology and in design and
construction methods with low embodied energy and on-site works organisation,
industrialization and lowering cost of energy retrofitting and they should take into account
any architectural constraints. They should also include innovations in business models and the
holistic integration of disciplines across the value chain. Proposals should also consider
energy efficient and low carbon solutions to retrofit building-level heating and cooling
systems and the integration of on-site renewable energy generation17, energy storage systems
which allow for optimisation and flexible consumption, and, if relevant, integration with
district heating and cooling systems. Proposals could address drivers of building renovation
that go beyond a desire to reduce energy consumption and related energy costs. For example,
decisions to renovate may sometimes coincide with structural repairs. They could also
consider further development and improvement of hybrid energy systems using fossil fuel
based heating systems coupled with RES based heating systems as well as the integration of
highly-efficient buildings and local energy system solutions such as District Heating and
Cooling, including hybrid solutions.
Solutions should include quick and simple installation of components and systems,
minimizing disruption for building occupants and the time spent on site. Proposals should
include monitoring and displaying of real time energy performance and other relevant data
and consider the ways in which consumers and others could access and make use of such
information. Solutions should ensure high levels of occupant comfort (thermal, visual and
acoustic) and indoor environmental quality (e.g. air quality, humidity) if possible based on
bio-based materials, as well as low risk of moisture-related problems, summer overheating
16
It is expected that this topic will continue in 2020.
17
possible synergies with RES-3-2018: Renewable energy system integrated at a building or an industrial site,
RES-4-2018: Increased performance of technologies for shallow geothermal heating and cooling solutions and
their integration in the energy system, RES-5-2018: Demonstrate significant cost reduction for built-in PV
solutions for "(nearly) Zero Energy Buildings”

and other harmful unintended consequences, and should address the multiple benefits of
energy efficiency. Proposals should demonstrate solutions that aim for large scale roll-out
according to defined business models and financial schemes for owners.
Projects are expected to bring the technology to TRL level 8-9 (please see part G of the
General Annexes).
This topic contributes to the roadmap of the Energy-efficient Buildings (EeB) cPPP.
The Commission considers that proposals requesting a contribution from the EU of between
EUR 3 and 4 million would allow this specific challenge to be addressed appropriately.
Nonetheless, this does not preclude submission and selection of proposals requesting other
amounts.
Expected Impact: Proposals are expected to demonstrate the impacts listed below using
quantified indicators and targets wherever possible:
 Primary energy savings triggered by the project (in GWh/year);
 Investments in sustainable energy triggered by the project (in million Euro);
 High energy performance in the renovated buildings;
 Measurable cost reduction compared with a typical renovation (i.e. a renovation that
meets current minimum requirements of existing building regulations) or major energy
performance improvement at comparable cost;
 Reduction of time needed on site for renovation works by 20% compared to current
national standard practice;
 Demonstration of the effectiveness and replicability of the proposed solutions to lead to

an increased rate of renovation for defined building typologies in several
districts/cities/regions.
Additional positive effects can be quantified and reported when relevant and wherever
possible:
 Reduction of the greenhouse gases emissions (in tCO2-eq/year) and/or air pollutants (in
kg/year) triggered by the project.
Type of Action: Innovation action
The conditions related to this topic are provided at the end of this call and in the General
Annexes.
LC-SC3-EE-2-2018-2019: Integrated home renovation services
Specific Challenge: Many project promoters – public authorities, individuals or businesses –

lack the skills and capacity to set up, implement and finance ambitious low-energy and clean

energy building projects. In addition, many project developers still face obstacles in raising
the necessary up-front costs for their projects – particularly as the small-size of investments
and the lack of turnkey solutions increase implementation cost – and lack access to attractive
and adequate financing products from the market.
Scope: This topic aims at creating or replicating innovative local or regional "integrated home
renovation services". The developed services should cover the whole "customer journey"
from technical and social diagnosis, technical offer, contracting of works, structuring and
provision of finance (e.g. loans or EPCs), to the monitoring of works and quality assurance.
Such integrated services should be operational at the end of the project and create more
demand for holistic approaches as a result of improved offer by trustful market operators and
better awareness from homeowners. They should also support the streamlining of standards
and practices into consistent and transparent processes investors can rely on, and by doing so
help connect the supply of finance with demand for it.
Proposals should build upon the promising experiences of integrated renovation services
emerging in Europe 18 and aim at developing / improving economically viable business
models, ultimately running without the need for public subsidies.
Projects funded under this topic will optimise the services required along the renovation
process (based on a thorough analysis of the local needs and actors in place), improve trust
and awareness of homeowners towards such services, reduce renovation costs and time on-
site through standardised approaches (e.g. optimized business processes, standardised
contractual arrangements, branding of the proposed services etc.), mainstreaming innovative
technical solutions adapted to the local context, help improve their legal and regulatory
environment, and overall improve financing conditions for energy renovation.
The services can be developed through dedicated operators (new public or public/private
entity or mandated private operator) and/or through an improved co-ordination between
existing local actors.
EUR 0.5 and 1.5 million would allow this specific challenge to be addressed appropriately.
amounts.
Expected Impact: Proposals are expected to demonstrate the impacts listed below, using
 Implementation and upscale of economically viable business models, ultimately running

without the need for public subsidies. Data evidence made available to market actors.
Proof of the replication of these initiatives by other market actors;
 Availability of adequate financing offer for integrated renovation services;
18
Please see the examples of good practice in chapter 3 of the Commission Staff Working Document ‘Good
practice in energy efficiency’ (SWD(2016) 404 final)

 Strong and trustworthy partnerships with local actors (e.g. SMEs, ESCOs, financial
institutions, energy agencies, NGOs) and quality of the proposed services recognized by
market actors;
 Development of large, locally-developed investment pipelines for home renovation,

connecting the supply of finance with demand for it (in million Euro of investments
within the first 5 years);
 Uptake of home energy renovation at local level and corresponding primary energy
savings triggered (in GWh/year).
possible:
Type of Action: Coordination and support action
Annexes.
LC-SC3-EE-3-2019-2020: Stimulating demand for sustainable energy skills in the

construction sector19
Specific Challenge: Based on results of the BUILD UP Skills initiative, in particular the
National Qualification Platforms and Roadmaps, as well as the qualification and training
schemes developed in various Member States, the challenge is now to act at market level and
to support legislative changes that will stimulate the demand for energy skills.
The objective is to increase the number of skilled building professionals and/or blue collar
workers across the building design, operation and maintenance value chain (designers,
architects, engineers, building managers, technicians, installers, blue collar workers including
apprentices, and other building professionals), with a specific focus on the engagement of
SMEs. Recourse to skilled professionals/workers both for renovations and new constructions
of buildings and district scale solutions should be made more attractive and easier for
companies and home owners alike.
Scope: The focus of submitted proposals should be on the direct stimulation of demand for
energy skills in construction. This is calling for the development, up-scaling and combination
of a range of tools and initiatives, e.g.:
 Tools facilitating the mutual recognition of energy skills and qualifications in the
construction sector: development of sustainable energy skills passports/registers for
workers at regional/national level and support for their take up at EU level, mobile
19
It is expected that this topic will continue in 2020

applications facilitating the comparison of workers' skills and qualifications between

countries (e.g. by enabling the direct comparison of learning outcomes);
 National, regional or local initiatives raising awareness of home and building owners and
tenants about the benefits of sustainable energy skills and providing financial incentives
for renovations done using skilled workers/professionals;
 Support to public authorities for the development of new legislative frameworks, e.g.
requirements for skilled workers in public procurement;
 Partnerships with producers and retailers of construction products (e.g. DIY stores) to
raise awareness of the salesforce and of consumers about energy efficient products,
skilled workers and good practice in construction/renovation;
 Initiatives reinforcing the link between skills/education and energy performance/quality

of construction e.g. tools showing the reduction of the performance gap as result of an
increase quality of the works.
Proposals need to be focused and are not necessarily required to address the whole range of
professions and crafts involved in the building sector. They may however consider the entire
design chain (e.g. manufacturers). If the proposal addresses specifically design, material life
cycles and embodied energy shall be considered. Adequate consideration should also be given
to improved appreciation of the end user's needs including the quality of indoor environment
(thermal and visual comfort, acoustics, air quality, etc.) as well as improved operation and
maintenance.
EUR 0.5 and 1 million would allow this specific challenge to be addressed appropriately.
amounts.
Expected Impact: Proposals are expected to demonstrate, depending on the scope addressed,
the impacts listed below using quantified indicators and targets wherever possible:
 Primary Energy savings triggered by the project (in GWh/year);
 Measurable energy savings and/or renewables production resulting from improved skills;
 Increased number of certification schemes for energy efficiency skills;
 Improved mutual recognition of sustainable energy skills between Member States and
neighbouring countries;
 Improved collaboration and understanding across different trades and professional

groups;

 Increased market acceptance of sustainable energy skills;
 Legislative changes stimulating the demand for energy skilled construction

workers/professionals;
 Demonstrated reduction in the gap between designed and actual energy performance
through improved quality of construction.
possible:
Annexes.
LC-SC3-EE-4-2019-2020: Upgrading smartness of existing buildings through

innovations for legacy equipment20
Specific Challenge: An essential part of Europe's clean energy transition is the changing role
of buildings from consuming energy to actively controlling and optimising indoor
environment while contributing to energy system flexibility by ensuring distributed energy
generation from renewable energy sources, energy storage, facilitate smart charging of EVs,
load reduction through energy efficiency and load shifting through demand response.
Innovative technologies will enable smart buildings to interact with their occupants and the
grid in real time and to manage themselves efficiently, so as to become an active element of
the energy system. Intelligent and connected devices, smart sensors and controllers, supported
by the development of new business models for new energy services, will create new
opportunities for energy consumers.
Today in the EU, the existing building stock represents the main challenge for a more
efficient energy use, in buildings as well as across the whole energy system. The smart
readiness of buildings may evolve faster for devices and systems easily replaced and installed,
than for other parts of the building's equipment such as HVAC and DHW systems due to
higher costs of replacement, longer lifecycles and difficulties related to integration in
buildings. This installed equipment remains highly relevant for buildings interactions with the
energy system, making its upgrade to higher levels of smartness an essential step. The revised
Energy Performance of Buildings Directive introduces a Smart Readiness Indicator (SRI) to
reflect the level of services offered by a smart building. Once established, this indicator will
give a framework to assess the smart readiness of buildings and building units to adapt
operation to the needs of the occupant and the grid and to improve energy efficiency and
overall performance.
20

Scope: Proposals should develop and demonstrate cost-effective technological solutions to

manage energy within existing buildings and interact with the grid providing energy
efficiency, flexibility, generation and storage, based on user preferences and requests. These
solutions should be aimed to upgrade existing buildings, either residential or tertiary, using
automation and IT to offer new services and control to the building users, thereby improving
their comfort and increasing their satisfaction. This upgrade should translate into
improvements in the areas put forward by the revised EPBD, in relation to the smart readiness
indicator.
Proposals should demonstrate how the smart systems, smart controls and smart appliances can
be integrated seamlessly in existing buildings to interface and/or to control the major energy
consuming domestic appliances that are already installed. These pilots should involve several
types of domestic appliances and technical building systems with longer lifecycles (boilers,
radiators, DHW preparation, motors for ventilation, windows opening and shading; lighting
etc.) and with shorter lifecycles (dryers, washing machines, fridges, etc.), testing several types
of control modes (ON/OFF, power modulation, etc.) possible for a given type of appliance.
Recharging points for electric vehicles and other forms of energy storage should also be
incorporated in the pilots. The proposed solutions should not adversely affect the original
functionalities, product quality, lifetime, as well as warranties of the appliances.
Besides the pilot demonstrations, proposals are expected to include clear business model
development and a clear path to finance and deployment. Key partners should have the
capability and interest in making the developed solution a core part of their business/service
model to their clients.
These business models and exploitation strategies should target the broad uptake of the
proposed smart systems into specific building typologies in Europe and their integration with
evolving electricity markets, e.g. dynamic pricing or other services and information offered by
energy suppliers and/or aggregators. Integrations with other energy networks (e.g. DHC) can
also be considered.
The solutions should focus on cost-effectiveness and user-friendliness: easy installation and
maintenance, maximising consumer comfort (e.g. self-learning) and information on own
consumption (e.g. recommendations to the user in order to maximise savings) as well as on
gains from its contribution to grid operation.
These solutions should build on innovative technologies, initiatives and approaches

contributing to building smartness: semantics, data models, data layers, protocols, software
building blocks, APIs, middleware, solutions for smart services, standards, relevant industrial
consortia or technology initiatives, etc. Interoperability is essential to ensure the required
smart readiness, in particular integration with legacy equipment, user-friendliness and broad
market uptake.
A realistic estimate should be provided on the total energy savings/year and on the impact of
the innovations demonstrated in the project on the total power available for cost effective
demand response actions. The projects should involve technology providers (e.g.

manufacturers of appliances, movable envelope components, smart control/ home systems

providers), energy services providers (aggregators and/or suppliers and/or ESCO's), user
representatives, electricity system operators and other actors as relevant.
The activities are expected to be implemented at TRL 6-8 (please see part G of the General
Annexes).
The Commission considers the proposals requesting a contribution from the EU of between 3
to 4 million would allow this specific challenge to be addressed appropriately. Nonetheless
this does not preclude submission and selection of proposals requesting other amounts.
 Upgrade of existing buildings to higher smartness levels, including a significantly

enlarged base of existing building equipment and appliances monitored by energy
management systems and activated through demand response actions;
 Reduction in energy consumption and costs, exceeding the additional consumption from
IT and its cost.
possible:
 Reduction of the greenhouse gas emissions (in tCO2-eq/year) and/or air pollutants (in
Annexes.
LC-SC3-EE-5-2018-2019-2020: Next-generation of Energy Performance Assessment and

Certification21
Specific Challenge: Under the Energy Performance of Buildings Directive22, all EU countries
have established independent energy performance certification systems supported by
independent mechanisms of control and verification. However, current practices and tools of
21
22
Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance
of buildings

energy performance assessment and certification applied across Europe face a number of
challenges.
Assessment processes and certificates have to become more reliable, user-friendly, cost-
effective, have comparable good quality and be compliant with EU legislation in order to
instil trust in the market and incite investments in energy efficient buildings. They have to
increasingly reflect the smart dimension of buildings and at the same time, facilitate
convergence of quality and reliability of Energy Performance Certificates (EPCs) across the
EU. The building energy performance methodologies should also ensure a technology neutral
approach, be transparently presented making use of International and European standards, in
particular the ISO/CEN standards developed under Commission mandate M/48023 aimed at
enabling the presentation of national and regional choices on a comparable basis.
Next-generation energy performance assessment schemes will value buildings in a holistic

and cost-effective manner across several complimentary dimensions: envelope performances,
system performances and smart readiness (i.e. the ability of buildings to be smartly monitored
and controlled and, to get involved in demand-side management strategies). The assessment
should be based on an agreed list of parameters/indicators, such as e.g. calculated annual final
energy use, share of renewable energy used, past (climate corrected) final energy
consumptions and energy expenditure, comfort levels or the level of smartness. The
assessment methods should increasingly take into account output measures of performance
(actual measured data) making use of available and increasing number of building energy
related data from sensors, smart meters, connected devices etc.. These new schemes should
contribute to improving the effectiveness of certificates, by demonstrating how these could be
strengthened, modernised and best linked to integrated national/regional certification schemes
within a framework that aids compliance checking and effectiveness of financial support.
Scope: 2018 (Coordination and support action):
Proposals should involve relevant stakeholders (including national and regional certification
bodies) to stimulate and enable the roll-out of next-generation of energy performance
assessment and certification, with a view to achieve enhanced reliability, cost-effectiveness
and compliance with relevant EU standards and the Energy Performance of Buildings
Directive. Proposals should develop strategies to encourage convergence of EPC practices
and tools across the EU so as to ensure a comparable level of high quality, independent
control and verification. The applicability of assessment and the certification schemes should
be assessed through a broad set of well-targeted and realistic cases, featuring various
locations, building types, climatic conditions and field practices including existing national
EPC schemes. The assessment will aim at demonstrating the potential of an EU-wide uptake
23
ISO/EN 52000-1, 520003-1, 520010-1, 52016-1, 52017-1, and 52018-1. 52022-1, EN 12098-1, EN 12098-3, EN
12098-5, EN 12831-1, EN 12831-3, EN 15232-1, EN 15316-1 , EN 15316-2, EN 15316-3, EN 15316-4-1, EN
15316-4-2 , EN 15316-4-3 , EN 15316-4-4, EN 15316-4-5, EN 15316-5, EN 15378-1, EN 15378-3, EN 15459-1,
EN 15500-1, EN 16798-3, EN 16798-5-1, EN 16798-5-2, EN 16798-7, EN 16798-9, EN 16798-13, EN 16798-
15, EN 16798-17, EN 16946-1, EN 16947-1, EN ISO 10077-1, EN ISO 10077-2, EN ISO 10211, EN ISO
12631, EN ISO 13370, EN ISO 13786, EN ISO 13789, EN ISO 14683 and EN ISO 6946, ISO/EN 52017-1 and
ISO/EN 52022-1.

of the proposed assessment and certification schemes, along well-defined criteria. Embedding
the EPCs and their recommendations in broader concepts such as energy audits, wider-
buildings related databases (e.g. national EPC databases, national housing surveys, EU
Building Stock Observatory) and one-stop-shops including administrative, financial and
supply side information and linking EPCs to related concepts such as buildings renovation
passports, individual buildings renovation roadmaps or building logbooks should also be
considered.
amounts.
2019 (Innovation action):
Proposals should address the definition and demonstration of innovative approaches for the
assessment of building energy performance, focusing at first on the reliable assessment of
building intrinsic performances (e.g. using inverse modelling) but working also towards
output-based assessments using available building energy related data 24 . Proposals should
involve relevant stakeholders (including national and regional certification bodies). The
proposed approaches should be more reliable as well as cost-effective and compliant with
relevant EU standards 25 , in order to allow for an EU-wide deployment. Such approaches
should rely on the combination of existing and proven technology components (starting from
TRL 6-7, please see part G of the General Annexes) with well-structured methodologies and
protocols that can lead to the definition of new certification schemes. They could also
consider implications when using EPCs in building passports and renovation roadmaps.
EUR 2 and 2.5 million would allow this specific challenge to be addressed appropriately.
amounts.
Expected Impact: 2018 (Coordination and support action):
Proposals are expected to demonstrate, depending on the scope addressed, the impacts listed
below using quantified indicators and targets wherever possible:
24
The projects relevant for building energy data gathering and computing will be funded through: 1) large scale
IoT pilot DT-ICT-10-2018: Interoperable and smart homes and grids; 2) big data pilot DT-ICT-11-2019: Big
data solutions for energy.
25
CEN standards (provide ref) and EN ISO 52000-1CEN (provide ref) standard, EN ISO 52000-1.

 Increased convergence of good quality and reliable energy performance assessment and
certification and uptake and compliance with EU Directives and related standards;
 Increased rate of application and compliance of EPCs and independent control systems
with the provisions of EU and national legislation, in a defined region;
 Increase of EPCs databases for compliance checking and verification, linking with
financing schemes and building stock characteristics research etc.
below using quantified indicators and targets wherever possible:
 Improved user-friendliness of EPCs in terms clarity and accuracy of the information

provided;
 Enhanced user awareness of building energy efficiency;
 Investments in sustainable energy triggered by the project (in million Euro).
possible:
Type of Action: Coordination and support action, Innovation action
Annexes.
Energy efficient industry and services
LC-SC3-EE-6-2018-2019-2020: Business case for industrial waste heat/cold recovery26
Specific Challenge: Energy and fuels represent an important part of the production costs in
several Resource and Energy Intensive Industries (REII). While a lot of technical progress has
already been done in REII to reduce the energy consumption of the main industrial processes,
significant parts of the input-energy are still lost in the form of waste heat/cold by gas, liquid
or solid streams. Wide-scale deployment of industrial waste heat/cold recovery is hindered,
among others, by the lack of financial/ economic justification for the required equipment and,
at times, by the limited industrial applicability (i.e. process re-integration). Often, it is
26

forgotten that directly or after an intermediate transformation step, the sources of heat/cold
losses of a given industry can be a valuable resource for other industries and buildings/
District Heating and Cooling operators and that they could be of commercial interest for the
waste heat/cold producer. Furthermore, other energy cooperation activities between industries
can also contribute to increase their energy efficiency. Thus physical clustering (e.g., of
buildings and processes, energy exchange, collective production) and/ or service clustering
(e.g., joint contracting) can deliver a more stable cumulative demand, economy of scale for
larger installations with higher efficiencies and smaller spatial footprint and an optimised
demand response.
Scope: 2018 (Innovation action):
Cost-benefit models for industrial waste heat/cold recovery:
Proposals should develop integrated cost-benefit simulation tools that, based on the
characterization of processes, heat/cold streams and other relevant variables, can determine
the best utilisation options of recovered waste heat/cold and/ or surplus renewable energy
from industrial and eventual other sources (when available). Proposals should also consider
the possibility to contribute to efficient use/system integration of renewable energy sources
through e.g. heat/cold storage and flexible production.
The proposals are expected to put forward simulation tools that would allow industrial
sites/parks to determine the most financial attractive option for using their recovered waste
heat/cold and/or surplus renewable energy. This should be based on, inter-alia, waste
heat/cold recovery (and storage if necessary) costs (including equipment and process
adaptation), retail and/ or whole sale energy prices, (new contracts) administrative and legal
costs, (external connecting) infrastructure costs, internal and external demand, waste heat/cold
as source of flexibility in electricity system. Other relevant variables should also be included,
inter-alia, characterisation of barriers and opportunities on the DHC side (e.g. competition
with other heat/cold sources, thermal storage, regulatory conditions). The simulation tools are
expected to be flexible enough to allow a large number of different types of industrial sites/
parks to use it, i.e. should allow many energy intensive process characterizations irrespective
of the industrial sector and geographic location, and should also take into account supply-
demand dynamics.
The simulation tools should be validated through demonstration in real operating conditions
in industrial facilities.
Proposals are expected to include clear business model development and a clear path to
finance and deployment. Key partners should have the capability and interest in making the
developed solution a core part of their business/service model to their clients.
Proposals are expected to look at relevant business models for the collaboration outside the
plant/industrial park and have strong communication and dissemination components in order
to reach many industries, large private facilities and public authorities.

This topic contributes to the roadmap of the Sustainable Process Industry through Resource
and Energy Efficiency (SPIRE) cPPP.
The activities are expected to be implemented in the range of TRL 4-8 (please see part G of
the General Annexes).
amounts.
2019 (Coordination and support action):
Symbiosis in industrial parks and clusters- non-technological barriers
Proposals should improve the energy efficiency of industrial parks districts and clusters by
unlocking the market potential and supporting the demand and offer of high-quality energy
services by addressing at least one of the following points:
 The development and testing of instruments facilitating, at customer/ business level, the
actual implementation of energy cooperation such as setting up appropriate process and
business organisation, operation and plant design, cooperation mechanisms, related
contractual and financial arrangements, better planning, good practices. Proposals need
to include capacity building activities such as skills development and engagement of
senior and executive management (e.g. CEO, CFO, energy managers) of companies
from industrial parks and other related stakeholders.
 The development and testing of replicable business models and service concepts, at
service provider level (i.e. ESCOs or other relevant 3rd party organisations such as DHC
operators), for joint energy services such as identification of horizontal energy services
attractive for businesses, identification of the most relevant innovative technical
solutions, setting up contractual and financial arrangements, best practices, cost-
reduction models. Proposals need to include capacity building activities such as sharing
skills, know-how and specific expertise of ESCOs or other 3rd party organisations that
would boost the market uptake for such joint energy services contracting in industrial
parks.
This topic contributes to the roadmap of the Sustainable Process Industry through Resource
and Energy Efficiency (SPIRE) cPPP.
Proposals need to also address legal issues in order to adapt regulatory and legal frameworks
at local, regional and national level. Issues related to the sustainability of the proposed
symbiosis in case one or more of the involved parties are changing activity (including leaving
the park) should be taken into account. Proposals are expected to ensure applicability of the
solutions to other industrial parks/ business sectors while strong communication and
dissemination components will be needed in order to reach many industries, industrial park
managers and ESCOs.

amounts.
Expected Impact: 2018 (Innovation action):
Proposals are expected to demonstrate the impacts listed below, using quantified indicators
and targets wherever possible:
 Accurate prediction and holistic modelling of industrial waste heat/cold and/or surplus
renewable energy from industrial or other sources from different geographical and
market settings;
 Better impact of the various factors/ variables on the cost-benefits of industrial waste
heat/cold and/or surplus renewable energy from industrial or other sources;
 Valorisation in assessments of cost-benefit of industrial waste heat/cold and/or surplus

renewable energy from industrial and eventual other sources;
 Number of industrial sectors/ sites/ parks, public authorities (including energy agencies),
large private facilities (e.g. sport and shopping centres, non-energy intensive industrial
parks) and DHC operators aware, interested and supporting the implementation of waste
heat/cold and/or surplus renewable energy from industrial and eventual other sources
recovery/use for process re-integration or commercial use, depending on the outcome of
the simulations;
 Investments in sustainable energy triggered by the project (in million Euro).
possible:
2019 (Coordination and support action):
below, using quantified indicators and targets wherever possible:
 Number of (operational and organisational separated) plant sites (within one industrial
park) and the number of industrial parks where businesses commit to energy
cooperation;

 Number of relevant stakeholders (e.g. ESCOs, industrial park managers) aware of and/or
interested in/ implementing joint energy services;
 Number of policies and legal frameworks created and/ or adapted to facilitate energy
cooperation among businesses.
possible:
Type of Action: Innovation action, Coordination and support action
Annexes.
LC-SC3-EE-7-2020 - Increasing energy efficiency of small data centres
LC-SC3-EE-8-2018-2019: Capacity building programmes to support implementation of

energy audits
Specific Challenge: The Energy Efficiency Directive, in its art.8, requires Member States to
develop programmes encouraging SMEs to undergo energy audits and to implement the
recommended energy-saving measures. SMEs represent enormous energy saving potential.
However, the lack of expertise, time and capital, including energy audit supporting scheme,
often prevents SMEs from implementing energy conservation measures or from getting access
to the energy services market.
The effectiveness of energy audit recommendations is influenced by people's behaviours and

the improvement of enterprises' energy cultures. The availability of reliable energy
consumption data is of utmost importance to monitor the impact of energy saving measures
and behaviours. The actions should lead SMEs to become fully aware of the multiple benefits
resulting from energy audits as well as facilitating their actual implementation. Moreover,
capacity building programmes should also support implementation of the recommended
energy-saving measures both for small and large enterprises.
Scope: Proposals should focus on one, or more, of the following issues:
 Staff trainings and capacity buildings programmes, facilitating SMEs to undergo energy
audits and to implement the recommended energy-saving measures, shall be developed
according to SMEs specificities (size, sectors, lifetime of the company etc.) and
highlighting the financial aspects. Programmes should aim at bridging the gap between
demand and supply side (SMEs, auditors, finance institutions, managing authorities of
supporting schemes). An active participation of both managerial and operational staff
must be ensured. The proposed solution should be tailored to national/local conditions in
order to ensure the effective uptake by the SMEs.

 Capacity building to support the take-up of audits recommendations and undertake the
actions necessary to reduce energy consumption (maintenance or investments in new
equipment but possibly also behavioural actions) in the companies required to undergo
energy audits (large enterprises). Development and implementation of corporate policy
measures involving all actors (from decision makers/corporate board members to
employees in each department) willing to undertake more efficient energy-related
actions (motivations, behaviour change, mitigation of perceived risks and barriers).
Evaluation of the total costs of building investments, in terms of financial, environmental
and health impact.
 Initiatives supporting Member States in empowering or establishing national supporting

schemes for SMEs providing appropriate incentives to undergo energy audits and/or to
implement the recommended energy-saving measures.
Proposals should demonstrate how the proposed activities will be continued commercially
beyond the project lifetime. Involvement of relevant multiplier organisations is also
encouraged.
amounts.
the impacts listed below using quantified indicators and targets wherever possible:
 Market stakeholders with increased skills/capability/competencies (to be measured in

number of people with increased capacity) and long-lasting training schemes;
 Number of people/enterprises with enhanced energy culture documenting why and how
changes are an effect of particular measures taken as consequence of energy audits, as
well in terms of the sustainability of the behavioural change;
 Policies and strategies created/adapted at national level (to be measured in number of

initiatives/actions taken to improve/create audit supporting schemes and/or number of
SMEs supported in the implementation of energy audit).
possible:

Annexes.
Energy efficiency is an investment
LC-SC3-EE-9-2018-2019: Innovative financing for energy efficiency investments
Specific Challenge: There is a need to set up innovative financing schemes at regional or

national level in order to create the conditions for adequate supply of private finance for
energy efficiency investments. Innovative financing schemes for energy efficiency aim to
progressively maximise the leverage ratio of public funds to private finance. This is in line
with the "Smart Finance for Smart Buildings"27 initiative that aims at using public funds more
effectively.
Scope: Proposals should address the development or replication and implementation of

innovative financing schemes for energy efficiency investments. They can involve different
types of organisations, ownership structures and financing models such as dedicated credit
lines; guarantee facilities; factoring/forfaiting schemes; on-bill (e.g. utility-financed) or on-tax
financing schemes; citizen financing (e.g. crowd-funding) for energy efficiency; finance
models for the deep renovation of buildings, addressing both property and rental markets;
finance models for different industry sectors and cross-sectorial initiatives; financing
solutions integrating existing market-based instruments relevant for energy efficiency (e.g.
carbon finance instruments, including those under the European Emissions Trading System;
energy efficiency obligations, including white certificates; etc.); or schemes based on project
aggregators or clearing houses at regional or national level, which should support project
development and match demand and supply of energy efficiency finance. These schemes
should address the provision of finance as well as the structuring of demand, in particular at
regional/national level, and target specific areas (e.g. energy-intensive industries, buildings
etc.). Proposals should justify how the proposed schemes complement already available
funding and how they are tailored and innovative for the targeted regions and market
segments; as well as clearly demonstrate the market potential, as well as business case and
financial viability of the scheme (including investment sizes targeted, expected savings,
transaction and management costs, expected returns etc.).
Proposals should address one or more of the following points:
 Establishment of new innovative, operational financing schemes;
 Replication of previously successful solutions e.g. developed and implemented under

various project development assistance (PDA) facilities under the Horizon 2020 and
Intelligent Energy Europe programmes (including MLEI PDA or ELENA);
27
https://ec.europa.eu/energy/sites/ener/files/documents/1_en_annexe_autre_acte_part1_v9.pdf

 Establishment of regional/national aggregators which are able to develop large

(standardized) project pipelines;
 Creation of EU or regional/national energy efficiency investment roundtables/platforms

to organise dialogue with and between the relevant stakeholders and (among others)
develop roadmaps, propose improvements in the legal frameworks and develop and
validate template documents and contracts leading to a better understanding of the
market. Proposals should include a clear action plan to communicate across Europe
towards potential replicators.
amounts.
the impacts listed below, using quantified indicators and targets wherever possible:
 Delivery of innovative financing schemes that are operational and ready to finance
energy efficiency investments;
 Regional/national aggregators with demonstrated/traceable capacity to set up large-scale

pipeline of (standardized) sustainable energy investments (in terms of number of and/or
amount of investment);
 EU or regional/national energy efficiency investment roundtables/platforms providing a

comprehensive range of support and/or services to facilitate access to energy efficiency
finance.
possible:
Annexes.

LC-SC3-EE-10-2018-2019-2020: Mainstreaming energy efficiency finance28
Specific Challenge: Energy efficiency is not yet considered as an attractive investment by the
financial sector which limits the possibility to use external private finance on top of equity of
project owners and available public funding. The lack of statistical data on the actual energy
and costs savings achieved by energy efficiency investment projects, as well as on payment
default rates, results in financial institutions attributing high risk premiums to energy
efficiency investments.
Energy efficiency represents high transaction costs for rather small investments, which is not
financially very attractive. Technical and legal standardisation is highly needed at all steps of
the investment value chain in order to simplify transactions and increase the confidence of
financial institutions. The lack of standardisation of projects also prevents securitisation of
energy efficiency assets (loans or equity) so that financial institutions are not able to refinance
their debt on the capital markets29.
Whereas energy efficiency investments are usually expected to be paid back exclusively
through the reduction of the energy bill, there is increasing evidence that non-energy benefits
play a key role in the decision to invest in energy efficiency. This includes for instance
increased building value, lower tenant turnover or vacancy rates etc. These benefits need to be
quantified through data collection and monetised in order to evolve the parameters used by
financiers to assess an energy efficiency investment.
Scope: Proposals should address at least one of the following issues:
 Development, demonstration and promotion of frameworks for the standardisation and

benchmarking of sustainable energy investments. This could include for example, but
not exclusively, labelling schemes, project rating methodologies and risk assessment
tools, standardised legal and financial structures of assets (loans, guarantees, energy
performance contracts etc.) in order to develop securitisation for energy efficiency based
financial products. Proposals integrated in a broader approach such as socially
responsible investment should focus on the energy component;
 Capacity building for banks and investors at the national and local level, in particular on
underwriting sustainable energy investments;
 Gathering, processing and disclosing large-scale data on actual financial performance of

energy efficiency investments, in order to create a track record for energy efficiency in
different sectors (buildings, industry, transport, etc.) Proposals should build upon or
complement the work of the Energy Efficiency Financial Institutions Group (EEFIG)
e.g. the De-risking Energy Efficiency Platform30;
28
29
A successful example of standardisation enabling securitisation is the PACE market in the USA
30
https://deep.eefig.eu/

 Further integration of non-energy benefits in project valuation, in particular in the

building sector, leading to evolution of existing financial products or creation of new
targeted products;
 Targeting institutional investors (e.g. public pension schemes) in order to increase the
share of their funds invested in energy efficiency, or to develop specific funds or
investment products. Supporting the integration of energy efficiency in portfolio
management strategies for institutional investors and/or fund managers, including
through re-definition of fiduciary duties;
 Exploring the impact of revised risk ratings and requirements for energy efficiency on
financial regulations (Basel III, Solvency II).
EUR 1 million and EUR 1.5 million would allow this specific challenge to be addressed
appropriately. Nonetheless, this does not preclude submission and selection of proposals
requesting other amounts.
 Number of financial institutions and other stakeholders reached as well as their potential
volume of investment concerned;
 Frameworks, standardisation, benchmarking, standardised descriptions and data

evidence of financial returns of energy efficiency investments agreed and accepted by
the market;
 Higher allocation of institutional investments to energy efficiency; standardisation of

assets enabling securitisation; development of a secondary market for energy efficiency
assets (in million Euro of investment within 5 years after the end of the project);
 Investments in sustainable energy triggered by the project (million Euro).
possible:
Annexes.

LC-SC3-EE-11-2018-2019-2020: Aggregation - Project Development Assistance31
Specific Challenge: Investors and lenders need to gain more confidence on investment
projects related to energy efficiency which are still seen as risky and fragmented. EU added
value can be realised in particular where projects introduce innovation to the market regarding
project aggregation and financing solutions minimising transaction costs and engaging the
private finance community. EU added value could also be realised where projects
demonstrably remove legal, administrative and other market barriers for mainstreaming large
scale sustainable energy investment schemes.
Scope: Project Development Assistance (PDA) will be provided to public and private project
promoters such as public authorities or their groupings, public/private infrastructure operators
and bodies, energy service companies, retail chains, large property owners and
services/industry. The action will support building technical, economic and legal expertise
needed for project development and leading to the launch of concrete investments, which are
the final aim and deliverable of the project.
Proposals should focus on one or more of the following sectors:
 existing public and private buildings including social housing, with the aim to
significantly decrease energy consumption in heating/cooling and electricity;
 energy efficiency of industry and service;
 energy efficiency in all modes of urban transport (such as highly efficient transport
fleets, efficient freight logistics in urban areas, e-mobility and modal change and shift);
and
 energy efficiency in existing infrastructures such as street lighting, district

heating/cooling and water/wastewater services.
The proposed investments will have to be launched before the end of the action which means
that projects should result in signed contracts for sustainable energy investments to that effect,
e.g. construction works, energy performance contracts, turnkey contracts.
Whilst proposals may address investments into distributed, small-scale renewable energy
sources in combination with energy efficiency, the main focus should lie on capturing
untapped high energy efficiency potentials.
Proposals should include the following features:
 an exemplary/showcase dimension in their ambition to reduce energy consumption

and/or in the size of the expected investments;
31

 deliver organisational innovation in the financial engineering (e.g. on-bill financing

schemes, guarantee funds, or factoring funds) and/or in the mobilisation of the
investment programme (e.g. bundling, pooling or stakeholder engagement);
 demonstrate a high degree of replicability and include a clear action plan to

communicate experiences and results towards potential replicators across the EU;
 build on the experiences from previous PDA projects32.
This PDA facility focuses on small and medium-sized energy investments of at least EUR 7.5
million to EUR 50 million. Large scale investments are covered by the ELENA facility.
EUR 0.5 and 1.5 million would allow this specific challenge to be addressed appropriately.
amounts.
Expected Impact: Proposals are expected to demonstrate, the impacts listed below, using
 Delivery of a series of sustainable energy investment projects and innovative financing

solutions and/or schemes;
 Every million Euro of Horizon 2020 support should trigger investments in sustainable
energy worth at least EUR 15 million;
 Primary energy savings, renewable energy production and investments in sustainable

energy triggered in the territory of participating parties by the project (respectively in
GWh/year and in million Euro of investments);
 Demonstration of innovative and replicable investment financing solutions, documenting

feedback/uptake from potential replicators.
possible:
Annexes.
32
Records of all PDA projects can be found in CORDIS under the topics EE-20-2014/2015 and EE22-2016/2017.
All fact sheets can also be retrieved directly from: https://ec.europa.eu/easme/sites/easme-
site/files/20160805_mlei_projects-factsheets_final.pdf

LC-SC3-EE-12-2020 - Innovation procurement for energy efficiency
Energy efficiency is an energy source
LC-SC3-EE-13-2018-2019-2020: Enabling next-generation of smart energy services

valorising energy efficiency and flexibility at demand-side as energy resource33
Specific Challenge: Energy Efficiency services (e.g. Energy Performance Contracting (EPC))
are available on the market already for quite some time. However, there is a big untapped
potential in sectors and with actors not yet engaged in services triggering energy, CO2 and
cost savings. At the same time, new technologies have emerged opening the door for new
types of services which use ICT to better control and steer energy consumption according to
market and system needs and to the availability of renewable energy; others are able to
integrate energy services with non-energy benefits such as comfort. By bundling various
services and benefits, additional target groups, sectors and financial resources can be
accessed. Actions are also needed to structure and label the quality of demand side service
providers (like ESCOs aggregators and energy cooperatives) and improve their accessibility
for end energy users.
Finally, ICT-tools and big data generated by smart meters, smart devices and sensors will help
monitor and verify energy savings and flexibility and thus provide for appropriate
remuneration of optimised consumption. A particular challenge for energy services of this
kind is that while they aim to involve different services (e.g. system services) and benefits
(e.g. comfort) towards increasing their viability, they should nevertheless result in real,
measurable energy savings and performance improvements of the overall energy system.
Scope: 2018 (Coordination and support action):
Actions should allow different market actors to get together and focus on developing
integrated concepts and models which
 enhance and refine successful energy performance contracting models and/or;
 include pay-for-performance schemes and/or;
 include customer individualized energy services as a result of better understanding of

customer behaviour and needs derived of new data analytics tools;
 engage new sectors and actors and/or;
 integrate energy efficiency services with other energy services like distributed generation
and demand response and including storage/hybrid energy systems and/or non-energy
related services; these should be endorsed by relevant stakeholders and validated (for
example tested around existing projects or projects under development);
33

 factor in potential legal and contractual aspects (e.g. in relation to existing contracts or
warranty, safety and data security issues linked to existing and newly deployed
equipment).
Proposed actions should cover at least two (but not necessarily all) of the relevant areas and
aspects identified below:
 Energy service models (like EPC) and services that target new sectors and new actors;
 Business models which work equally for energy efficiency and other services, building
on contractual arrangements across different actors (ESCOs, aggregators, DSOs, energy
cooperatives, obliged parties under the Energy Efficiency Obligation Schemes
implementing art 7 EED and eventually the consumers) which traditionally cover
different use cases business interests and different revenue;
 "Pay for performance"-schemes which focus on permanently reducing power

consumption in particular at peak times, thus attracting new sources of financing;
 The use of 'big data' generated by smart meters, equipment, sensors and tools for
standardised processes enabling a more accurate and dynamic measurement and
verification of energy savings and flexible consumption, also in order to ex-ante identify
and develop business opportunities;
 Additional non-energy features that support the up-take of innovative energy efficiency
services and technologies;
 Improving the accessibility and quality of demand side service providers while
enhancing their access to the market.
Proposals are expected to include clear business model development and a clear path to
finance and deployment. Key partners should have the capability and interest in making the
developed solution a core part of their business/service model to their clients.
The Commission considers that proposals for Coordination and Support Actions requesting a
contribution from the EU of between EUR 1 million and 2 million would allow this specific
challenge to be addressed. Nonetheless, this does not preclude submission and selection of
proposals requesting other amounts.
Projects should focus on demonstrating and testing innovative energy services in a real
environment, across several market segments and across different actors in the value chain.
To be economically viable, these services need to be able to rely on sound measurement and
verification methodologies. They should cover several but not necessarily all of the relevant
areas and aspects identified above, blending in innovative manner different revenue streams
coming from different market segments and they should in all cases include innovative
verification and monitoring measures. Moreover, they should demonstrate how potential legal

and contractual aspects (e.g. in relation to existing contracts or linked to the use of equipment)
have been accounted for.
Proposals should demonstrate that the tested business models and services are self-sustainable
after the end of the project. The upfront investments in energy efficiency measures (e.g.
upgrading of building energy performance) and in smart building systems should be paid back
at least in part by revenues coming from energy savings and remunerated flexibility.
The Commission considers that proposals for Innovation Actions requesting a contribution
from the EU of between EUR 3 and 4 million would allow this specific challenge to be
addressed. Nonetheless, this does not preclude submission and selection of proposals
requesting other amounts.
Where possible and appropriate, the actions should cooperate with the projects funded under
the topics: DT-ICT-10-2018: Interoperable and smart homes and grids, DT-ICT-11-2019: Big
data solutions for energy in the WP 5.i ICT, and LC-SC3-ES-6-2018-2020: LC-SC3-ES-5-
2018-2020: TSO – DSO – Consumer: Large-scale demonstrations of innovative grid services
through demand response, storage and small-scale (RES) generation.
 Improved viability of innovative energy services.
In addition, proposals are expected to demonstrate, the impacts listed below, using quantified
indicators and targets wherever possible:
 A growing offer and up-take of services that combine energy efficiency with other
energy services, technologies and non-energy benefits;
 A growing up-take of innovative data gathering and processing methods in the

monitoring and verification of energy savings and flexibility;
 The application of methods and concepts to ensure that: (i) innovative energy services
are reliable and verifiable, (ii) service providers are trustworthy and accessible.
possible:
Type of Action: Coordination and support action, Innovation action

Annexes.
LC-SC3-EE-14-2018-2019-2020: Socio-economic research conceptualising and

modelling energy efficiency and energy demand 34
Specific Challenge: In the Energy Union Strategy, Energy Efficiency was recognised as a
resource in its own right which should be enabled to compete on equal terms with generation
capacity and to have primary consideration across all policies35. However, the structure of
energy demand as well as the real value beyond the fuel's cost and the (energy and non-
energy) impacts of energy efficiency are still not well understood with the effect that benefits
of energy efficiency are not sufficiently taken into account in financial and political decision
making, and planning, while prices of fossil fuels remain relatively low.
The topic addresses three different dimensions of this challenge with the aim to trigger actions
which
1. make the energy efficiency first principle more operational (2018);
2. substantiate the demand side aspects in energy modelling (2019).
Scope: 2018:
The research projects should help to make the Energy Efficiency First principle more concrete
and operational and to better understand its relevance for energy demand and supply and its
broader impacts across sectors and markets. In particular, it needs to be analysed how energy
efficiency programmes along the efficiency chain, i.e. end-use, operation, transmission and
generation/utilisation of resources, can compete in reality with supply side investments (e.g.
additional generation capacities or import capacities) including at the level of countries and
having in mind limited public budgets. It would also be necessary to describe and assess how
it interacts with and correlates to other policy objectives, at a policy level as well as at the
level of implementation.
Actions which conceptualise and assess the impacts and model the energy efficiency first
principle, in particular as regards:
 its role and value in the energy system (e.g. for planning of generation assets and
networks adequacy etc.) and the energy market (participation in capacity market,
participation and impact on prices and costs on wholesale and balancing/reserve
markets);
 its role and value in financing decisions (considering as well that in some Member States
retail prices do not reflect real costs);
34
35
Communication from the Commission A Framework Strategy for a Resilient Energy Union with a Forward-
Looking Climate Change Policy /* COM/2015/080 final

 its economic and social impacts;
 its correlation and interaction with other policy objectives (e.g. renewable energy,
demand response);
 existing best practices worldwide where energy efficiency projects are given priority
over additional supply side measures.
EUR 1 million and 1.5 million would allow this specific challenge to be addressed.
amounts.
2019:
The aim of the action is to deepen the demand side-related parameters in existing models and
to include new aspects and data sources (e.g. by tapping DSOs modelling for forecasting of
distributed loads). In general, it is to be expected that the introduction of smart meters and
smart equipment will lead to more accurate consumption data providing for a more holistic
mapping of the demand side and thus for better projections inside energy policy development
and a more effective regulatory framework.
The action should complement the existing demand side energy models by developing
multiple-agent energy models and/or modelling segments and/or developing methodologies
on how to improve and enhance the demand side aspects in modelling.
These models and/or methodologies should:
 be compatible with the energy models most commonly used at European level;
 model more accurately those aspects not yet sufficiently considered in the existing
models;
 make use of new data sources, including big data as for example generated by smart
meters, smart buildings and smart equipment;
 identify and refine the structure and patterns of demand and how it will develop;
 contribute to an enhanced demand-side model to be consistently used at European level.
EUR 1 million and 2 million would allow this specific challenge to be addressed.
amounts.
Expected Impact: 2018:

Actions are expected to support policies aiming to promote and implement the "energy
efficiency first-principle" based on a sound assessment of the concept and its impacts. To this
end, actions should lead to a better understanding of:
 all relevant aspects linked to the "energy efficiency first-principle";
 its impacts (e.g. technical, economic, socio-economic, and ecological etc.) on the
relevant sectors and markets;
 its potential across the different policy areas and sectors;
 its consideration and valorisation in modelling and assessments; and
 its interaction with other policy objectives both at policy level (e.g. climate and
renewable policies, circular economy) and at the level of concrete application (e.g.
design of buildings).
2019:
Proposals are expected to demonstrate the impacts listed below, using quantified indicators
and targets wherever possible
 More accurate and holistic mapping and modelling of the demand side and to a better
assessment of energy consumption trends for different categories of economic agents.
 More accurate follow-up of energy efficiency measures implemented at the demand side;
 Better assessment of demand-side policy needs at European level.
Type of Action: Research and Innovation action
Annexes.
Support for policy-driven innovations
LC-SC3-EE-15-2018: New energy label driving and boosting innovation in products

energy efficiency
Specific Challenge: The energy label is a key driver for innovation in the energy efficiency
area. For more than 20 years the tangible results of the transformation of the European market
are being observed, where only the products with the highest energy efficiency parameters
and innovative solutions to save energy are being commercialised. The energy label
stimulates a real competition in innovation among product manufacturers. However the
current energy label has a closed scale from A+++ to D, so once the majority of products
reach the highest classes, the label no longer stimulates further innovation. Therefore, the
Commission has proposed that, in future, labels will be 'rescaled' (as well as go back to A-G

scale), i.e. existing products will be re-categorised in lower classes so that the top classes are
empty and provide new stimulus for innovation. The ‘empty top-class’ label will be the
strongest and continuous innovation trigger. Rescaling of labels would take place
approximately every ten years or faster, if technology development and innovation has been
faster than expected. This rescaling, will be a challenging operation in terms of organisation
and provision of information to the concerned market actors, requiring technical guidance,
communication and training campaigns, including during the transitional periods36 in order
that the new scale is correctly applied by manufacturers leaving enough space for future
innovations. Customers' confusion should be avoided by replacing labels displayed on the
affected products within a short timeframe in order to ensure consumer choice to be directed
to the highest class innovative products.
Scope: The proposed action should cover one or more of the following points:
1. Raise the capacity of manufacturers and, in particular, retailers (e.g. through a

comprehensive training methodology, involving a series of hands-on applications in each
Member State) to fulfil their obligations providing and displaying respectively the
correct label at the point of sale;
2. Develop and roll out tailored and effective actions focusing on awareness-raising and
information campaigns to alert market actors (businesses, public procurement personnel,
consumers etc.) of label rescaling, with a view to increasing understanding of labels and
routing purchase decisions towards higher efficiency products. These actions should also
address any additional references that may exist on the rescaled label (e.g. QR code);
3. Exchange of best practices in relation to these campaigns, including through the

recommendation of common key messages to the respective target groups.
All relevant stakeholders necessary for the successful implementation of the action should be
involved (e.g. manufacturers, retailers, public procurement personnel and consumers).
amounts.
 Investments in sustainable energy triggered by the project (million Euro);
 Number of stakeholders (e.g. public procurement personnel, businesses and consumers)

informed by actions aiming at improving the understanding of rescaled labels,
36
A period during which old (before the rescaling) and new rescaled labels for the same products would both be
present in shops.

minimising any risk of confusion (at least 5 million stakeholders per million Euro of EU
funding);
 Number of manufacturers, suppliers and retailers engaged by actions aiming at

improving their understanding of rescaled labels, minimising the risk of confusion (at
least 5 000 market actors per million Euro of EU funding);
 Reduced compliance costs, maximise legal certainty and minimise errors during the
transition periods for suppliers and dealers.
possible:
Annexes.
LC-SC3-EE-16-2018-2019-2020: Supporting public authorities to implement the Energy

Union37
Specific Challenge: The delivery of the Energy Union targets requires the full engagement of
the public sector at all governance levels.
Local and regional public authorities have a crucial role in setting ambitious energy efficiency
strategies, for instance in the framework of the Covenant of Mayors for Climate & Energy
and Smart Cities & Communities or the Clean Energy for All islands initiative. The political
commitment at local level should be enhanced and the focus should turn to implementation
and effective monitoring of concrete energy efficiency solutions and actions, which can
contribute to modernise and decarbonise the European economy. Synergies should be sought,
whenever possible, with local and regional air quality plans 38 and air pollution control
programmes39 to reduce costs since these plans rely to a large extent on similar measures and
actions40.
Support should continue and be reinforced in building capacity of public authorities and
empowering them to take up their role of energy transition leaders at regional and local level,
by permanently improving their skills as public entrepreneurs and supporters of market
transformation towards more efficient energy systems.
37
38
Directive 2008/50/EC
39
Directive 2016/2284
40
Second State of the Energy Union, page 13.

At national level, the Energy Efficiency Directive has triggered numerous positive
developments in the Member States by setting targets to incentivise and enable investment in
energy efficiency programmes across all sectors. However, Member States have yet to fully
implement the Directive and additional support in building capacity and know-how is needed.
Scope: a) Support to local and regional public authorities
Proposers should aim to focus their proposed action on one of the following points:
 Deliver higher quality and consistency of energy efficiency measures implemented

through enhanced coordination of different administrative levels. Actions should lead to
politically approved and jointly applied monitoring and verification schemes of energy
efficiency measures across local and regional authorities, enhanced and better
coordination of the energy efficiency measures implemented and more efficient use of
public spending in energy efficiency;
 Support public authorities in the development of transition roadmaps that clearly outline
the path to the European long-term 2050 targets and inform the ongoing implementation
of SEAPs/SECAPs or similar plans and the development of future plans/targets for 2030
and beyond. Actions should link closely to the Covenant of Mayors and/or Smart Cities
and Communities initiatives;
 Innovative ways to enable public engagement in the energy transition, developing

interface capacities within public authorities to engage with civil society;
 Deliver large-scale and action-oriented peer-to-peer learning programmes targeting cities

and/or regions, with a strong replication potential European-wide. Proposals should
develop transparent, effective and compelling programmes, building on existing
initiatives and real needs and ensure embedded conditionalities such as
institutionalisation of the skill base and impact monitoring. Programmes should deliver
public entrepreneurs able to drive the sustainable energy transition in their respective
territories within the Covenant Mayors and beyond.
b) Supporting the delivery of the Energy Efficiency Directive
Support will be provided to actions that are assisting Member States to fulfil their obligations
under the Energy Efficiency Directive and help with its efficient implementation taking into
account existing effective practices and experiences from across Europe. Actions may
address, for example, the harmonisation of energy savings calculations under Article 3,
implementing Energy Efficiency Obligation Schemes or alternative measures and setting up
effective and consistent monitoring and verification systems under Article 7 or the removal of
barriers to higher efficiency of the generation, transmission, distribution systems including
demand response under Article 15.
Proposals should link into existing, relevant initiatives such as ManagEnergy and target a
specific sector with high energy saving potential such as buildings, transport mobility, heating
and cooling, or water infrastructure operation etc., as seen relevant by applicants.

amounts.

energy triggered in the territory of participating parties by the project (respectively in
GWh/year and in million Euro);
 Number of public officers with improved capacity/skills;
 Number of policies influenced through the action;
 Number of Member States with improved implementation of Art 7. (Energy Efficiency

Obligation schemes or alternative measures) / Energy savings achieved through
successfully implemented Energy Efficiency Obligation schemes or alternative policy
measures;
 Number of Members States with improved and consistent monitoring and verification
systems for energy savings across governance levels.
Annexes.
LC-SC3-EE-17-2019: European City Facility - European cities as key innovation hubs to

unlock finance for energy efficiency
Specific Challenge: Mobilising investment in energy efficiency and renewables is key for
Europe's energy transition. The European Commission proposed the Smart Financing for
Smart Buildings (SFSB) initiative in the recently published Clean Energy for All Europeans
winter package.
For the SFSB to succeed it is essential to boost project aggregation and build a substantial
pipeline of energy efficiency investment projects across Europe. Cities and communities are
the place where economic, social and environmental transformation actually happens. Cities
and communities play a key role in aggregating smaller projects into sizable packages and in
mobilising the significant amount of finance needed for the energy transition.
However, despite a tremendous potential, too few cities and communities in Europe succeed
in developing and scaling up investment packages. A high degree of organisational, technical
and financial innovation is needed to reach significant scale. A key gap is the lack of capacity
of public authorities, especially of small and medium-sized municipalities to transform their
overall long-term strategies, e.g. Sustainable Energy Action Plans (SEAPs) or similar, into

credible investment concepts. Public authorities have limited resources, in particular, to

access financial, technical and legal expertise needed to collect additional data, develop an
investment programme of scale (e.g. pooling projects and/or bundling with neighbouring
constituencies) and design finance strategies which demonstrate sufficient maturity to enable
access to different finance routes, i.e. to develop their 'investment concept'.
These concepts would allow a large number of cities and communities to start the process for
mobilising the investments in sustainable energy. When relevant, such concepts could be
combined with other EU financing streams and services to trigger the expected investment
(e.g. EFSI41, ESIF42, PDA43, National Investment Platforms).
Scope: Proposals are expected to set up and run a 'European City Facility' which offers
financial support and services to cities and municipalities or their groupings:
 The European City Facility should offer financial support to develop innovative
investment concepts within a limited period of time, covering, inter-alia: a clear
identification of the potential project pipeline, legal analysis, governance analysis, a
description of how the investments will be financed and a design of the process to launch
the investments.
 Proposals should foresee to provide support to third parties ('support scheme') as

described in part K of the General Annexes of the Work Programme. At least 80% of the
budget should directly benefit cities, municipalities or their groupings.
 Proposers should demonstrate the ability to run a support scheme at large scale in
accordance with Horizon 2020 standards and that they are able to select the most cost-
efficient and appropriate city and community applications taking account, inter alia, the
scale of the potential investment and the number of inhabitants covered.
 Proposers should be deeply rooted in the ecosystems of municipal sustainable energy

planning and the challenge of finance of energy efficiency. Proposers should
demonstrate that they are able to mobilise a critical mass of cities/municipalities or their
groupings and have a sound and inclusive outreach strategy to cities and communities
across Europe.
 Proposals should foresee services to underpin European added value and earmark
appropriate resources (maximum 10% of the requested EU contribution) for common
actions that will underpin European added value.
 In order to qualify for support through the European City Facility, cities and
communities or their groupings should provide proof of political commitment,
demonstrate, additionally to existing planning processes and resources, a minimum
population covered (single or in groupings of municipalities) and an ambitious scale of
41
European Fund for Strategic Investments
42
European Structural and Investment Funds
43
Project Development Assistance, e.g. ELENA-EIB, EASME PDA

potential investment and level of energy savings based on politically approved SEAPs,
SECAPs44 or plans of similar ambition, describe the investment sectors targeted, the type
of financial solutions envisaged, the governance to develop the investment concept, and
include a plan for long-term capacity building within the public administration, a plan on
how they will engage with representatives of the key segments and citizens and a
commitment for monitoring for 2 years.
The Commission considers that proposals requesting a contribution from the EU of around
EUR 16 million would allow this specific challenge to be addressed appropriately.
amounts.
 Demonstration and documentation of increased leveraging of finance into energy

efficiency investments by public authorities;
 Overall, the action should trigger for every million Euro of Horizon 2020 support
sustainable energy investments worth at least EUR 20 million;
 Number of investment concepts delivered, and number of concepts that turned into
tangible investments after the provided support;
 Number of public authority staff with increased capacity for developing investible
energy efficiency projects;
 Innovation uptake by potential replicators;

energy triggered by participating public authorities after the support of the action
(respectively in GWh/year and in million EUR of investments).
possible:
 Reduction of greenhouse gases emissions (in tCO2-eq/year) and/or air pollutants (in
Annexes.
44
Sustainable Energy and Climate Action Plan

LC-SC3-EE-18-2019: Bioclimatic approaches for improving energy performance in

buildings in Africa and Europe
Specific Challenge: Africa is going through a rapid urbanisation phase and it is anticipated
that, by 2030, there will be more people living in urban than rural areas. On the other hand,
the housing supply is already far from meeting the highly growing demand in cities and the
expectations of home owners, in terms of performance, comfort and health. One of the
reasons for this situation is the insufficient use of construction materials and technologies,
which are adapted to local climate and economic contexts. Imported materials and
technologies, which are not always suitable for local conditions, are replacing the traditional
and local building designs, construction techniques and materials. Poor indoor thermal
conditions, in particular overheating, and high demand for expansive active cooling, are often
the result together with an increased buildings' energy footprint. Use of cheap and low-quality
materials to cut down construction costs and lack of knowledge about their performance are
other problems related to this issue. There is a need to increase the knowledge about the
benefits of using bioclimatic buildings design approaches, local materials, and construction
techniques suitable to local contexts.
Scope: Proposals should study the performance of a selection of European and African local
bioclimatic building designs, local construction materials and techniques to determine how
they could be utilized to increase the energy performance, living quality and sustainability of
buildings in targeted geographical zones in Africa and their climatic and socio-economic
conditions. Proposals should promote innovations, including bioclimatic approaches, to
enable adaptation of local materials and techniques to current building design and
construction practices and lifestyles. They should include maximizing passive cooling,
passive ventilation, natural light gains and suitability for specific local climate conditions (e.g.
stark rains). They should investigate how sustainable supply chains of local materials could be
established or improved to cope with fast paces of construction, contributing to the support of
local businesses. They should foster exchange and mutual learning between European and
African stakeholders (policy-makers, architects, auditors, building sector private companies)
for better regulation and implementation of locally adapted bioclimatic construction
approaches.
Proposals should include the following activities:
 Identification and documentation of African and European affordable buildings designs,

construction techniques and materials suitable for a selection of local climatic and socio-
economic contexts in Africa, based on bioclimatic construction approaches.
 Exchange activities around the topic of fostering low-cost, high performance, locally
adapted bioclimatic construction approaches for African and European policy-makers
and on the development of building policies, standards, regulations, certificates and other
relevant instruments and support measures in a selection of geographical zones in Africa.

They could also include the organization of one or several study visits to demonstration sites
for African policy-makers and other key stakeholder including the construction sector. South-
south cooperation is also encouraged.
 Investigation of the measures (in particular policy ones) that could effectively support
the development of sustainable and cost-effective supply chains of local construction
materials, in order to enhance their competitiveness and contribute to the growth of local
businesses.
The Commission considers that proposals requesting a contribution from the EU of around
amounts.
Expected Impact: Proposals are expected to demonstrate that they will trigger as many as
possible of the impacts listed below:
 Increased use of affordable, locally-adapted bioclimatic construction approaches in

buildings in Africa with high energy performance and increase living comfort;
 Expected (potential for) energy savings (kWh) in buildings thanks to the improved
techniques;
 Number of documented locally-adapted bioclimatic affordable building design,

construction techniques and materials;
 Number of participating policy-makers and other key stakeholders with increased

knowledge;
 Number of exchange meetings and/or study visits;
 Number of new legislative, regulatory, standardisation, certification schemes or other

support measures launched or under preparation;
 Investments aiming to develop or deploy affordable, locally-adapted bioclimatic

buildings design, construction techniques and materials;
 Promotion of effective sustainable supply chains of local construction materials;
 Number of workers with increased related skills in the bioclimatic construction sector.
Annexes.

Global leadership in renewables
The Energy Union Strategy has set the target for the EU to achieve global leadership in
renewable energies. Increased R&I efforts for renewable energy are indispensable hence
renewables are identified as a core R&I priority in the Energy Union Strategy and the
"Accelerating Clean Energy Innovation" Communication. The "Clean Energy for all
Europeans" package underpins the EU's ambition by a number of legislative proposals and
non-legislative initiatives, notably the recast of the Renewable Energy Directive which creates
the enabling framework for Member States to unlock their renewables' potential and
collectively reach a share of at least 27 % in the Union final energy consumption by 2030 in a
cost-effective way.
The Energy Union priorities, also in the area of renewable energy, are jointly implemented by
the stakeholder community, national authorities and the Commission through the key actions
of the EU Strategic Energy Technology Plan (SET Plan), notably action 1 ("Performant
renewable technologies integrated in the system) and action 2 ("Reduce costs of
technologies"). To attain these goals, ambitious R&I targets have been set in agreement with
the sectorial stakeholders, for renewable technologies with great potential for cost-reductions,
performance improvements and large-scale deployment worldwide – off-shore wind energy,
the next generation of solar photovoltaics (PVs), ocean energy, concentrated solar power
(CSP), deep geothermal energy and bioenergy. Furthermore, goals were set to increase
renewable penetration in the heating and cooling sector and to strengthen market take-up of
renewable fuels needed for sustainable transport solutions. While it is expected that the
Member States will take coordinated actions towards the priorities and targets set by the SET-
Plan, a strong and concerted effort also from the EU is needed to sustain the technological and
economic leading position in some renewable technologies and to catch up in areas where the
EU is lagging behind. Projects supported in this area contribute to the specific objectives,
targets and relevant Implementation Plans of the SET Plan actions 1, 2 and 845.
Activities fully reflect the "Open Science, Open Innovation and Open to the World Strategy"
– supporting open science and the new approach of the European Open Science Cloud
(EOSC) by providing access to relevant research results while moving up the TRL scale
innovative solutions; providing support opportunities for opening markets to innovative
solutions and for turning research results into successful products; being open to the world,
proactively exploring international cooperation activities in the precompetitive research
phase, and fostering local market adaption via frugal innovation of available technologies for
emerging global markets.
The challenge is to create an EU industrial renewable energy sector which is economically

sustainable and competitive in European and global markets in the long-term. For this
purpose, this area supports activities across the full innovation chain, from identifying
breakthrough technologies to supporting the entire portfolio of renewable energy technologies
at laboratory scale, dedicating support to validation in relevant environment of most
45

promising technologies, finally supporting market up take introduction with collaborative and
not purely technological activities. It features tailored approaches, taking into account
technology-specific challenges, potential, cultural aspects, levels of maturity, risk, and
competitiveness aspects.
This call includes 4 lines of interventions:
1. breakthrough technology development,
2. renewable energy solutions for implementation at consumer scale (encompassing

generation of energy in all its form, starting from electricity only generation to also
encompass combined heating and cooling solutions, from domestic to industrial and
district scale),
3. renewable energy solutions for implementation at the energy system level (oriented to
reduce the costs of electricity generated, to optimise system operation and improve
processes and components manufacturing, to provide flexibility to the system), and
4. renewable fuels for transport (aiming both feedstock and process improvements and
supporting road, aviation and shipping sectors in particular).
In addition, specific actions with an international dimension are set out, notably in the context
of the "Mission Innovation" initiative. A special focus is also on adapting emerging renewable
energy technologies to the African context by fostering cooperation and concerted actions
with the Member States and Associated countries (see area "Joint actions" of this work
programme part). Activities are complemented by the Horizon Prize on Artificial
Photosynthesis which is included in the "European Innovation Council (EIC) Pilot" part of the
work programme.
Actions in this area aim to produce solutions to support the worldwide large-scale
deployment of renewable energy, its broader penetration in the energy and transport mix to
significantly contribute to the decarbonisation of the global economy of the future. Actions
will make renewable energy solutions in the broader sense (i.e. including the use of the
renewable source and all the features needed for performing in a complex and integrated
energy system) cost competitive with their fossil equivalents, allowing them to participate in
the energy and transport markets on a level playing field. They will support the transition to a
decentralized energy system where the citizens are empowered to take an active role and
become prosumers. In addition to the Energy Union strategy, actions will contribute to the
broader EU policies and objectives of growth and jobs, promoting production of more
affordable energy in Europe and sustaining European players to succeed in the global energy
and transport markets, giving special consideration to cooperation with strategic partner
countries/regions.

Next Renewable energy solutions
The focus of these actions is to support research activities aiming at identifying renewable
energy breakthroughs that will feed the innovation cycle and become the basis of the next
generation of EU technologies.
LC-SC3-RES-1-2019-2020: Developing the next generation of renewable energy

technologies46
Specific Challenge: The renewable energy technologies that will form the backbone of the
energy system by 2030 and 2050 are still at an early stage of development today. Bringing
these new energy conversion solutions, new renewable energy concepts and innovative
renewable energy uses faster to commercialisation, taking into account social acceptance and
secure and affordable energy supply, is challenging. These new technologies must not only
have a commercial potential but they should also have a lower environmental impact and
lower greenhouse gases emissions than the current renewable energy technologies.
Due to the pre-competitive nature of the research activities of this type, particular emphasis is
put on including international cooperation opportunities, whenever relevant to the proposal
and the domain, in particular in the context of the Mission Innovation Challenges47.
Scope: Proposals are expected to bring to TRL 3 or TRL 4 (please see part G of the General
Annexes) renewable energy technologies that will answer the challenge described. Beside the
development of the technology, the proposal will have to clearly address the following related
aspects: the potential lower environmental and climate impact on a life cycle basis, the better
resource efficiency, issues related to social acceptance or resistance to new energy
technologies, related socioeconomic and livelihood issues.
Support will be given to activities which focus on converting renewable energy sources into
an energy vector, or the direct application of renewable energy sources.
One of the following technology-specific sub-topics has to be addressed:
 Developing the new energy technologies that will form the backbone of the energy
system by 2030 and 2050. The challenge is to develop energy technologies currently in
the early phases of research. It is crucial that these new, more efficient, and cost-
competitive energy generation and conversion technologies, demonstrate their potential
value in the future European energy system. Developments in sectors other than energy
may provide ideas, experiences, technology contributions, knowledge, new approaches,
innovative materials and skills that are of relevance to the energy sector. Cross-
fertilisation could offer mutually beneficial effects;
46
47
http://mission-innovation.net/our-work/innovation-challenges/

 Innovative materials for geothermal heat exchangers to maximize energy transfer and
improve the overall conversion efficiency of a geothermal system;
 Innovative testing methods and design tools for acceleration of wind energy technology
development and increased life time extension;
 Sustainable fuels other than hydrogen for energy and transport application through
ground-breaking conversion technologies, addressing for example development of novel
microorganisms, enzymes, catalysts, photosentisizers and separation techniques,
improvement of biomass and microalgae yields, and development of novel technologies
of combined indirect and direct artificial photosynthesis with chemical/
biochemical/biological systems;
 Innovative very high efficiency thin-film photovoltaics concepts considering advanced,

sustainable and low-cost materials and processes.
Novel technology solutions for grid integration, storage, fuel cells and hydrogen – (other than
integral to the technology solution developed), energy efficiency and smart cities will not be
supported under this topic but in the relevant parts of this work programme part and other
H2020 work programme parts.
EUR 2 to 5 million would allow this challenge to be addressed appropriately. Nonetheless,
Expected Impact: On its completion, the project is expected to advance the knowledge and
prove the technological feasibility of the concept including the environmental, social and
economic benefits. The proposal should show its contribution towards establishing a solid
European innovation base and building a sustainable renewable energy system contributing to
the decarbonisation of our economies. The proposed solutions are expected to contribute to
strengthening the EU leadership on renewables.
Annexes.
LC-SC3-RES-2-2018: Disruptive innovation in clean energy technologies48
Specific Challenge: The challenge is to take exceptionally promising and innovative energy
solutions with high potential impact to real breakthrough and market application. Boosting the
breakthrough of particular promising technologies requires both a focused and adaptive
approach, to secure that investment brings innovation that is taken up by the market - or
discontinues an investment that has too limited expected impact. Specific fields where
48
This pilot is excluded from the delegation to Executive Agencies and will be implemented by the Commission
services.

disruptive rather than incremental innovation is needed are the integration of renewable
energy into smart buildings, and sustainable fuels. A specific challenge is to develop efficient
fully transparent photovoltaic (PV) cells that only absorb light in the non-visible part of the
spectrum, so that they can be integrated on a wide scale as windows in buildings. Another
specific challenge is to enable production of sufficient quantities of liquid fuels that do not
compete with food for land, do not displace land uses, are cost competitive to fossil fuels and
substantially reduce greenhouse gas emissions.
Scope: Proposals are invited in (only) one of the following two sub-topics:
 Photovoltaic windows ('transparent' solar cells): development of transparent and

economically viable PV cells for integration in building applications. Projects should
demonstrate a prototype 'PV window' which allows the visible light to pass through
unhampered, and has the potential to achieve the lifetime and conversion efficiency of
commercial PV modules (resp. 25 years and at least 12%).
 Bionic leaf technology: advanced renewable fuel production through biological

conversion of CO2 and renewable hydrogen in the presence of inorganic catalysts. The
process is based on first using solar energy to split water molecules and then using
bacteria to consume the hydrogen together with CO2 to produce fuel, and currently has
an efficiency of 10%. Projects should advance the overall efficiency of the process for
existing or new biosynthetic systems up to 15% under ambient air conditions by
enhancing the water splitting efficiency and improving the engineering of bacteria and
their interface with the catalysts in order to boost their growth at all conditions.
Proposals are expected to bring the technologies from TRL 3 to at least 5. Proposals need to
demonstrate a clear technology development roadmap for their solutions, including a strong
exploitation plan presenting their business opportunities and impact potential. The
technological development risks need to be clearly identified and relevant mitigation
measures given. Life cycle analysis shall be considered.
Projects selected under this pilot will follow a stage-gate approach based on milestones and
periodic reviews. A first review by the Commission - with the help of independent experts -
will take place after 6 months, based on an assessment by InnoEnergy49 of the feasibility and
innovation potential of the proposed solution or application, analysing a.o. the business and
innovation strategy, the technology readiness level of the proposed application, the
consortium's freedom to operate (e.g. background, foreground, IP), and the market. This
review will lead to a first go/no go decision.
Throughout the duration of the Grant Agreement, and agreed therein, Inno Energy will be
involved in providing support to innovation and business development, including completing
the market uptake supply chain, using external expertise, with the aim to strengthen the
consortium's innovation performance.
49
http://www.innoenergy.com/

to 3 million would allow this specific challenge to be addressed appropriately. Nonetheless
Expected Impact: Transparent, visually non-intrusive PV windows have a significant market

potential, because they could be fitted to existing buildings, without the need to cover large
new areas to collect solar energy; every glass surface could produce solar power. As such PV
windows block much of the infrared radiation, they would cut down on air conditioning
needs, further reducing energy use and operating costs in buildings.
An economically viable bionic leaf technology with increased efficiency well beyond the
state-of-the-art has significant market potential and environmental impact, because it will
enable development of sustainable fuel for transport that will completely replace fossil fuels
and their best alternatives. Converting 50% of all industrial CO2 emissions into fuels using
this process at an efficiency of only 15% would avoid half of today's transport GHG
emissions. Moreover, this will improve Europe's energy security while at the same time create
economic growth.
Annexes.
LC-SC3-RES-3-2020: International Cooperation with USA on alternative renewable fuels for

energy and transport
LC-SC3-RES-29-2019: Converting Sunlight to storable chemical energy50
Specific Challenge: To replace fossil energy with sustainable alternatives that provide the
same flexibility and convenience of use, we need to store sustainable energy on a large scale
and for a long time in new kind of energy storage compounds. This can be done by direct
conversion of sunlight into storable chemicals that can be stored for a virtually unlimited time.
At present, these processes can be performed at the level of small prototype devices at high
cost. Therefore, research and innovation are needed to bring these approaches from infancy to
maturity. The production of clean forms of storable chemical energy from direct sunlight is
the next step.
Performance breakthroughs, including day and night continuous processes, and cost
reductions are a must in order to unlock the potential of technologies converting sunlight to
storable chemical energy.
This challenge is fully aligned to the "Converting Sunlight Innovation Challenge" 51 identified
as a priority in Mission Innovation.
50
51
http://mission-innovation.net/our-work/innovation-challenges/converting-sunlight-challenge/

Scope: Proposals are expected to address renewable energy technologies that will answer the
challenge described in the "Converting Sunlight Innovation Challenge" of Mission
Innovation, bringing them up to TRL 4 or 5. Beside the technological development, the
proposal will have to clearly address the following related aspects: the potential lower
environmental impact than the current technologies, possibly through a LCA analysis, the
better resource efficiency, issues related to social acceptance or resistance to new energy
technologies, related socioeconomic and livelihood issues, and prospective market analysis.
The proposal needs to consider all three dimensions of sustainability, resource efficiency and
scalability, i.e. not using materials which are uncommon, dangerous or scarce that could
disable its future concept to be used at large scale.
At least one of the following technology-specific challenges has to be addressed:
 Improved light-harvesting and efficient charge separation in photocatalytic systems;
 Photoelectrochemical cells – PECs and catalyst development;
 Thermochemical pathways to energy rich chemicals (using concentrated solar light); and
 Design and engineering of devices, systems or prototypes integrating together the

different processes, with day and night control and applicability for the production of
chemical energy rich carriers.
The area of electrolysers efficiently utilizing a renewable electricity input, such as provided
by photovoltaics, wind turbines or other sustainable means, is not covered by this challenge.
The proposal must have a plausible pathway to scale the technology to the terawatt scale by
2050, a plausible potential for an EROI > 10 (EROI: Energy returned on energy invested) and
the full recyclability of the conversion devices in the context of a circular economy must be
ensured.
As part of Mission Innovation actions, the project will be required to contribute towards the
activities of the "Converting Sunlight Innovation Challenge". Beside solving the technical
challenge, the consortium is expected to budget the participation in the development of the
Challenge work plan through activities such as dissemination, exchange of researcher and
networking as well as through contributing in official meetings.
Expected Impact: Projects will not only contribute to mitigating climate change through the
production of storable chemical energy from the sun, but also enhance energy security and
provide opportunities for economic development across the globe.
Projects should show its contribution towards establishing a solid European innovation base
and building a sustainable renewable energy system.

Contributing to Mission Innovation aims, projects will deepen the international collaboration
in clean energy research and development.
Annexes.
Renewable energy solutions for implementation at consumer scale
The focus of these actions will vary, depending on the number of consumers involved, from
individual and residential buildings, to industrial sites and district systems. Solutions explored
under this line of intervention consider holistically the consumer energy needs, from
electricity generation to heating and cooling services, aiming to develop near-zero fossil
energy solutions for buildings and districts. The solutions should allow for a significant part
of the energy to be consumed at the place of production, fostering the emergence of the
energy prosumers and therefore enabling the consumer participation into the energy
transformation.
Energy generation at building scale

LC-SC3-RES-4-2018: Renewable energy system integrated at the building scale
Specific Challenge: An increased penetration of renewable energy in the energy mix and the
decarbonisation of the heating sector are amongst the most important priorities set in the
Energy Union Strategy52. To this aim, solutions that integrate several technologies based on
one or more renewable energy sources (and their combination with energy storage systems
where necessary) should be made available and the highest possible share of renewable
energy should be achieved. This integration requires innovative approaches, due consideration
of the implications for the user and a proper assessment of the cost-effectiveness. This
specific challenge is in line with the objectives of the SET-Plan, of Innovation Challenge n. 7
("Affordable Heating and Cooling of Buildings") of Mission Innovation and the roadmap of
the Energy-efficient Buildings (EeB) cPPP.
Scope: The proposal will provide a combination of different renewable energy technologies to
cover the highest possible share of electricity, heating and cooling needs of a multi-family
residential or commercial or public or industrial building (in the case of the industrial
building, the project is not expected to address the energy needs of the industrial process).
Since the final application will be operated by users and installed by installers, their needs and
requirements (e.g. in terms of space that the users are willing to provide for the installation of
the different components of the system) shall be taken into account and the relevant expertise
in terms of social sciences and humanities has to be included in the consortium.
52
COM(2015) 80

Attention should be paid to reducing emissions of air pollutants.
Proposals are expected to bring the integrated technologies solutions from TRL 3-4 to TRL 4-
5 (please see part G of the General Annexes).
Expected Impact: The project is expected to develop solutions that will reduce the dependence
on fossil fuels for providing electricity, heating and cooling in buildings. Cost
competitiveness with traditional solutions is expected to be achieved by 2025 considering also
the effect of economies of scale.
Annexes.
LC-SC3-RES-5-2018: Increased performance of technologies for local heating and

cooling solutions
Specific Challenge: Renewable, local energy sources have a great potential to drastically
reduce the use of primary energy for both heating and cooling in residential and commercial
buildings. In order to stimulate the uptake of solutions that harness these sources, it is
necessary to make existing technologies more performant and therefore more cost-efficient
and attractive for the market. In addition, innovation in resource mapping, monitoring and
control tools have the potential to improve the design and the operation of heating and cooling
systems thus reducing investments and operation costs and increasing the systems'
performance. This specific challenge is in line with the objectives of the SET-Plan, of
Innovation Challenge n. 7 ("Affordable Heating and Cooling of Buildings") of Mission
Innovation and the roadmap of the Energy-efficient Buildings (EeB) cPPP.
Scope: The proposal is expected to address one or more of the following aspects:
 Optimisation of the different components of a renewable heating and cooling system;
 Development of tools and systems to optimize the design and monitoring of the different
components of a heating and cooling system;
 Development of integrated control systems for the smart operation of a heating and
cooling system.
The proposed systems will harness renewable local energy sources to supply heating and
cooling in residential and small and larger commercial buildings as they have different
heat/cold needs. The definition of residential building includes single houses and apartment
blocks.

Attention should be paid to reducing emissions of air pollutants.
Proposals are expected to bring the technologies from TRL 5-6 to 6-7 (please see part G of the
General Annexes).
Expected Impact: The project is expected to lead to either a significant performance increase,
in the order of 10-20%, in terms of available heat/cold or to a reduction in the investment and
operation costs or to a combination of both aspects, reducing the dependence on fossil energy
for heat and cooling in buildings.
Annexes.
LC-SC3-RES-6-2018: Demonstrate significant cost reduction for Building Integrated PV

(BIPV) solutions
Specific Challenge: BIPV need to satisfy multiple building functions such as mechanical
rigidity and structural integrity; primary weather impact protection including rain, snow,
wind, etc.; energy economy, such as shading, daylighting, thermal insulation; fire protection,
noise protection, in addition to architectural and aesthetic considerations, so as to replace
roofs, facades and shading devices. At the same time, a control system for building
management functions, grid-feeding, self-consumption and local storage needs to be
considered.
Scope: Support will be given to solutions that address: a) new BIPV product concepts to meet
these requirements and cost-efficient production techniques reducing their additional cost by
75% by 2030 compared to 2015 levels ( 53 Annex I. BIPV detailed targets) and; b)
demonstration of these concepts into a BIPV energy system that guarantees the building
functionalities and energy needs on a life-cycle basis. Proposals will involve multidisciplinary
consortia including the PV manufacturing industry. The building materials industry,
certification bodies and market actors who are committed to adopting/implementing the
results will also be included where relevant.
Proposals will also address standardization issues.
Proposals are expected to bring the technology from TRL 5-6 to 6-7 (please see part G of the
General Annexes).
53
https://setis.ec.europa.eu/system/files/integrated_set-plan/declaration_of_intent_pv.pdf

Expected Impact: The project is expected to contribute to the implementation of policies

towards Zero-Energy Buildings. By achieving a substantial reduction of the BIPV costs which
would trigger the penetration of BIPV in the building sector, they are also expected to
contribute to the creation of new opportunities and the diversification of the European PV
manufacturing industry.
Annexes.
Renewable energy solutions at the district level and for industrial processes
LC-SC3-RES-7-2019: Solar Energy in Industrial Processes
Specific Challenge: The potential of applying solar energy for industrial purposes is still
largely untapped. Using solar energy to provide the heat or cooling necessary to industrial
processes that need high reliability and high quality heat and cooling and continuous
operation requires innovative advances in solar energy technology. Also, industrial processes
might need to be adapted to the use of the solar resource. Industrial actors expect solutions
with limited installation, maintenance and operation requirements and which are easy to
operate. This challenge is also in line with the roadmap of the SPIRE cPPP.
Scope: Support will be given to solutions that cover by means of solar thermal energy the
highest possible share of the heating and/or cooling demand of one or more industrial
processes. In the case of heating, the process temperature shall be higher than 150°C.
Individual industrial sites and/or industrial parks (coupled to a district heating and/or cooling
network) are in the scope.
Proposals are expected to bring the technologies to TRL 4-5 (please see part G of the General
Annexes).
Expected Impact: An increased decarbonisation of the industrial sector, a reduced dependency

on fossil fuels and a reduction of emission of air pollutants are expected. Furthermore, the
project should create significant visibility to the potential of applying solar thermal energy in
industrial processes, especially in those EU countries where such systems currently have very
limited or no application. The knowledge generated by the project should contribute to the
development of relevant BREFs under the Industrial Emissions Directive.

Annexes.
LC-SC3-RES-8-2019: Combining Renewable Technologies for a Renewable District

Heating and/or Cooling System
Specific Challenge: There is a large potential to integrate substantial shares of renewable

energy generation in district heating and/or cooling systems. Innovative approaches are
needed to exploit this potential in the different geographical regions of Europe, also
considering the options of combining two or more renewable energy technologies and
integrating excess heat. The operators and users expect the systems to be reliable and to have
limited installation and running costs. This challenge is in line with what identified priorities
in the context of the SET-Plan.
Scope: Support will be given to cost-effective solutions for district heating and/or cooling
systems which allow satisfying at least 50% of the energy demand of the system by the use in
the district of one or more renewable energy technologies. The integration of sources of
otherwise wasted excess heat is in the scope.
The solutions should be demonstrated in real conditions within an operational district heating
and/or cooling system.
The consortium is expected to engage operators and final users (in particular if the users need
different supply temperatures) so that they can contribute for an optimal and cost-effective
design. The requirements of the final users (e.g., in terms of metering) for the day-to-day
operation shall be taken into account.
Proposals are expected to bring the technologies to TRL 6 (please see part G of the General
Annexes).
Expected Impact: A reduced dependency of district heating and/or cooling systems on fossil
fuels and reduced greenhouse gas emissions are expected, as well as reduced emissions of air
pollutants. Furthermore, the project should improve the attractiveness of "renewable" district
heating and/or cooling systems, especially in those EU countries where such systems
currently have very limited or no application.
Annexes.
LC-SC3-RES-9-2020: Next generation of thin-film photovoltaic technologies

LC-SC3-RES-10-2020: Pre-Commercial Procurement for a 100% Renewable Energy Supply
Renewable energy solutions for energy system level implementation
The focus of these actions is to reduce capital and operational costs, to increase reliability and
to provide flexibility to the energy system. Solutions should be implemented at the system
level, namely in those cases where the renewable energy that is inserted into the network, is to
be transmitted and distributed to the end user and not, or only in minimal part, used for self-
consumption.
Reduce costs of key technologies for renewable energy conversion

LC-SC3-RES-11-2018: Developing solutions to reduce the cost and increase

performance of renewable technologies
Specific Challenge: Achieving or maintaining global leadership in renewable energy

technology requires that the innovative solutions are also affordable. Therefore cost
reductions remain a crucial necessity for existing or new technologies. This specific challenge
is in line with the sectorial cost reduction targets stated in the respective Declarations of Intent
of the SET Plan54, where applicable.
Scope: Proposals will address one or more of the following issues:
a. Floating Wind – Technology development including reliable, sustainable and cost

efficient anchoring and mooring system, dynamic cabling, installation techniques, and
O&M concepts;
b. Onshore Wind - Disruptive technologies for the rotor, generator, drive train and support
structures for the development of the advanced or next generation wind energy
conversion systems;
c. Ocean: New integrated design and testing of tidal energy devices with behavioural
modelling to achieve extended lifetime and high resistance in marine environment;
d. Geothermal: Novel drilling technologies need to be developed to reach cost-effectively

depths in the order of 5 km and/or temperatures higher than 250°C;
e. CSP: Novel components and configurations for linear focusing and point focusing
technologies need to be developed and tested;
f. Hydropower: Novel components for hydropower hydraulic and electrical machinery

which allow efficient utilization also in off-design operation conditions, especially
during ramp up and ramp down phases and reduce related machinery wear and tear;
54
https://setis.ec.europa.eu/implementing-integrated-set-plan/no-1-renewables-ongoing-work

g. Bioenergy: Improve small and medium-scale combined heat and power (CHP) from
biomass to reduce overall costs of investments and operation through achieving at the
same time high resource efficiency and high overall and electrical conversion
performance.
Proposals are expected to bring technologies from TRL 3-4 to TRL 4-5 (please see part G of
the General Annexes). Beside the development of the technology, the proposal will have to
clearly address the following related aspects where relevant: potentially lower environmental
impacts, issues related to social acceptance or resistance to new energy technologies, related
socioeconomic issues.
Expected Impact: The proposed solution will reduce the CAPEX and/or OPEX of energy
generation from any of the mentioned renewable sources making it comparable to generation
costs from competing fossil fuel sources.
Annexes.
LC-SC3-RES-12-2018: Demonstrate highly performant renewable technologies for

combined heat and power (CHP) generation and their integration in the EU's energy
system
Specific Challenge: Progressive replacement of fossil fuels used in the heat and power sectors
by means of renewable energy sources can increase energy security, energy price stability as
well as independence from imported sources. However, to unlock the full potential of
renewable heat and power solutions to significantly contribute to the energy system,
improvement of individual technologies performance and their incorporation into the energy
system is needed.
Scope: Proposals will address one of the following sub-topics:
a. Biomass based combined heat and power (CHP): Demonstration of technically feasible
and cost-effective installation of medium to large-scale CHP through retrofitting of
existing fossil-fuel driven CHP or power plants, as such plants are already integrated in
the energy grid. Project will address the transformation of existing fossil fuel power
plants >10 MW electrical to CHP plants with the use of sustainable biomass feedstock.
Transformations have to demonstrate their overall cost benefits over new biomass-based
CHP installations and show at least their state-of-the-art requirements for continuous
operation and prove advances in combustion emission reduction. Commercial operation
of the plant with biomass after the end of the project is to be envisaged.

b. Geothermal: Allowing geothermal plants to respond cost-effectively to the heat and to

the power demand of the network would facilitate the integration of RES in the energy
system. Flexible geothermal units are needed to respond to the demand. In addition,
adding heat storage to geothermal plants and/or adding other auxiliary heat sources (e.g.
sustainable biomass, solar thermal) to geothermal sources, might be important to
increase flexibility and allow for better response to variable heat and power demand.
Proposals are expected to propose technologies for either more flexible geothermal
plants or more efficient geothermal plants or a combination of these two aspects.
Associating other renewable heat sources to geothermal and adding storage is not a
necessary condition.
The proposals are expected to bring the technology from TRL 5 to TRL 7-8 (please see part G
of the General Annexes).
Expected Impact: The successful demonstration of the proposed solutions will reduce the cost
of combined heat and power generation from renewable sources, making it competitive to
alternative fossil fuel based solutions. The proposed solutions are expected to lead to
subsequent commercial industrial projects, thus increasing the EU industrial capacity for
renewable power and heat generation at a lower installation cost. This will allow
decarbonisation of the power and heat sector.
Annexes.
LC-SC3-RES-13-2018: Demonstrate solutions that significantly reduce the cost of

renewable power generation
Specific Challenge: The cost of electricity generation from renewable sources has
significantly come down in the recent years, often putting PV and onshore wind at parity with
fossil fuel generated electricity. However, additional efforts are needed to bring the costs of
electricity generation from other renewable sources to a competitive level and allow their
broader penetration in the EU energy mix, as agreed with the sectorial stakeholders in the
context of the SET-Plan.
a. Offshore wind: Focus will be on the development and validation of new manufacturing,
installation and/or operation and maintenance techniques, introduction of new materials.
The whole value chain, including dismantling, recycling and retrofitting procedures, will
be involved to avoid over-engineering. Issues for improved production will be identified.
All aspects of health and environmental impact issues will be taken into account.

b. Deep geothermal: Focus will be on the demonstration of cost efficient technologies to

limit the production of emissions and/or to condense and re-inject gases, Turning the
emissions into commercial products could contribute to cost reduction but it is not a
necessary condition.
c. CSP: Focus will be on the demonstration in operational environment of CSP solutions

based on novel heat transfer fluids and/or of solutions which make an innovative use of a
heat transfer fluid that is already used in other CSP applications.
The proposals are expected to bring the technology from TRL 5 to TRL 7 (please see part G
Expected Impact: The successful demonstration of the proposed solutions will make
electricity generation from renewable sources capable to compete in the electricity market on
a level playing field.
Annexes.
Optimize processes and manufacturing

LC-SC3-RES-14-2019: Optimising manufacturing and system operation
Specific Challenge: Renewable electricity technologies still require optimisation in several

key processes of the respective value chains in order to achieve a more efficient conversion of
their primary energy source into electricity, as agreed with the sectorial stakeholders in the
context of the SET-Plan and stated in the respective Declarations of Intent.
 Monitoring system for marine energy (ocean and offshore wind): New intelligent
sensors, fault detection and communication systems for accurate condition and structural
health monitoring will enable predictive and preventive Operation and preventive
Maintenance processes, crucial for innovative wind and ocean farm control and the
realization of virtual power plants. Sufficient knowledge of potential failures and the
right tools to detect and locate failures are crucial.
 Geothermal fluids: Better understanding of the chemical and physical properties of these
fluids (including super-hot and hot fluids) as transport media is necessary to optimize
site development and operation.

 Photovoltaics: Development of innovative crystalline silicon wafer growth techniques to

produce high-efficiency solar cells and modules.
Proposals are expected to bring the technologies from TRL 3-4 to TRL 4-5 (please see part G
Expected Impact: The improved performance of manufacturing processes and system

operation is expected to lead to increased efficiency of the system and/or reduced operational
costs of the renewable technologies.
Annexes.
LC-SC3-RES-15-2019: Increase the competitiveness of the EU PV manufacturing

industry
Specific Challenge: The EU PV manufacturing industry has faced strong foreign competition
in the last years, which has led to a dramatic reduction of its production capacity. The
challenge is to develop innovative manufacturing solutions, spanning the entire production
chain, that substantially improve competitiveness of the EU PV manufacturing industry and
help regain a part of the potentially increasing worldwide PV market, while creating more
secure and sustainable supply chains for the EU PV market. This challenge is in line with the
priority identified in SET-Plan for an Initiative for Global Leadership in PV55.
Scope: Demonstrating manufacturing innovation as well as product innovation for highly

performing PV technologies (e.g. crystalline-silicon, thin-film and concentration PV).
Innovative solutions will be demonstrated at pilot-line level, showing the potential to be
scaled up to GW-size, high-yield-throughput and cost-effective industrial production of high-
efficiency cells and modules. Possible examples range from the optimization of one or more
steps in the value chain (by e.g. increased automation, laser processing, etc.) to the tailored
development of production equipment, to the enhanced durability and/or recyclability of the
final product, to the demonstration of production routes for cells and modules based on
innovative materials and/or architectures (e.g. perovskite/crystalline-silicon tandem cells).
Proposals are expected to bring the technology from TRL 5-6 to 6-7 (please see part G of the
General Annexes).
55
https://setis.ec.europa.eu/implementing-integrated-set-plan/no-1-renewables-ongoing-work

Expected Impact: Successful projects are expected to trigger new investments in the EU PV
industry, via the establishment of pilot lines which target innovative/optimised production
processes and/or tailored development of equipment for mainstream power PV technologies.
The proposed solutions are expected to show the potential for cost and performance
competitiveness of the final product.
Annexes.
Provide flexibility to the energy system

LC-SC3-RES-16-2019: Development of solutions based on renewable sources that

provide flexibility to the energy system
Specific Challenge: Supporting the balancing of the power grid and increasing the flexibility
of the energy system is possible through dispatchable renewable energy sources, such as for
example bioenergy and hydropower. The specific challenge is to increase the potential and
performance of dispatchable technologies to provide flexibility services to the energy system
by improving their technological characteristics.
 Bioenergy carriers: Development of intermediate bioenergy carriers for energy and

transport from biogenic residues and wastes and energy crops from marginal lands not
applicable to food or feed production through feedstock flexible technologies at a
conversion cost reduced by at least 25% from the state-of-the-art, excluding the
feedstock cost, and with increased energy density, storage and trade characteristics,
where relevant, and improved GHG performance. The state-of the art for conversion
costs per technology will be clearly presented in the proposal with cost figures and
versatility of use where appropriate.
 Hydropower: Development of low and ultra-low head and sea water resistant equipment
(such as for example bulb-pump turbines) guaranteeing at least 70% round-trip
efficiency and making low-head seawater storage and other low head applications of
hydropower viable, for example at unexplored locations (e.g. like at coastal dams and
islands), by minimising at the same time potential impacts on fish.
 Virtual Power Plant: Increase the performance of an integrated portfolio of renewable

energy sources (namely a combination of variable output and dispatchable renewable
sources) to operate together as a Virtual Power Plant, capable of providing flexibility and

ancillary services to the energy system. The solution has to be competitive compared
with solutions combining variable output renewables with electrochemical storage.
Proposals are expected to bring the technologies from TRL 3-4 to TRL 4-5 (please see part G
Expected Impact: The increased flexibility of the energy system will allow the penetration of
a higher share of variable output renewables in the energy mix without affecting system
stability.
Annexes.
LC-SC3-RES-17-2019: Demonstration of solutions based on renewable sources that

Specific Challenge: : Supporting the power grid balancing and increasing the flexibility of the
energy system is possible by means of dispatchable renewable energy sources. The specific
challenge is to increase the potential of renewable dispatchable technologies in providing
flexibility to the energy system. Different technologies are suitable to address this challenge.
a. Intermediate bioenergy carriers: Focus will be on the demonstration of the most cost-
efficient intermediate bioenergy carrier pathways for energy and transport, which
improve the economic viability of the subsequent energy production by addressing solid,
liquid and gaseous intermediate bioenergy carriers from biogenic residues and wastes
with increased energy density, storage and trade characteristics where relevant. Reduced
conversion costs and improved energy efficiency and GHG performance of the
intermediate bioenergy carrier pathway will be demonstrated. Production at a scale of up
to 5000 tons and process feasibility through applications to fuel production including for
the heavy duty, maritime and aviation sectors, as well as to combined heat and power
generation, are to be included.
b. Hydropower: Focus will be on the improvement of the average annual overall efficiency
of hydroelectric machinery. Projects are expected to provide high availability of
hydropower plants and to maximise performance of hydropower plants of all sizes. The
aim is adapting to variable speed generation the hydropower plants (new, refurbished
and uprated and especially existing ones); it is important that by optimising maintenance
intervals for all hydro plants (especially those delivering balancing power because of the
related dynamic operation, dynamic loads and increased wear and tear) the outage time

will be minimised. Digitalisation measures to increase the potential of hydropower in

providing flexibility to the energy system can be included.
c. Thermal energy storage in Concentrated Solar Power (CSP) plants: The focus will be
on the demonstration of innovative storage systems for CSP plants. The thermal energy
storage solutions proposed will have to achieve much higher storage densities than
current mainstream solutions (i.e. at least two times higher) while guaranteeing similar
performance in terms of cycles.
Proposals are expected to bring the technology from TRL 5 to TRL 7 (please see part G of the
General Annexes).
Expected Impact: The developed technologies will allow plant and system operators to
operate successfully in the modern power markets and to make a significant contribution to
European renewable energy objectives and policies.
Annexes.
LC-SC3-RES-30-2019: Demonstration of plug and play solutions for renewable off-grid

electricity
Specific Challenge: For off-grid communities, research and development is needed to bring
down the cost of renewable electricity solutions in diverse geographic and climate conditions
by improving at the same time their performance in respect of robustness, reliability, network
stability and autonomous operation. Existing micro-grid solutions do not fully respond to the
needs of communities in respect of investment costs, versatility, plug and play capabilities,
easy installation and connection to the renewable energy source, easy and cost-saving
logistics as well as maximisation of the renewables share.
Scope: Container-based integrated solutions for sustainable and long-term renewable

electricity production, storage and distribution which demonstrate better performance than
state-of-the-art solutions with respect to the overall installation, commissioning, operation and
maintenance costs. The following parameters and features are expected to be optimised:
 Versatility of renewable energy sources to utilise (e.g. photovoltaics, wind, micro-

hydropower, bioenergy);
 Plug and play capabilities towards the external electricity sources as well as storage
options;
 Maximising the share of renewable electricity sources vis-á-vis diesel generation;

 Demonstrated solutions should support power demand of decentralised communities up

to 100 kW, in line with targets of Mission Innovation Challenge Nr. 2.
A plug and play prototype should be fully demonstrated, including single shipment of the core
system in an intermodal container. Local installation of the fully operational system by the
local community should also be demonstrated. Demonstrations shall take place in at least two
communities with diverse physical landscape and climate conditions, which are located in
different continents. Those demonstrations should use different renewable energy sources
locally available. Necessary power generation equipment shall be shipped together with the
container; nevertheless, the project should also allow for integration of existing renewable
electricity installations in loco by also providing necessary hardware and software interfaces,
including those for remote operation and maintenance training. The container should include
equipment for energy management and metering as well as system monitoring for demand
response optimisation. Renewable drop-in solutions for commercially available equipment
developed primarily for fossil fuel use (e.g. biodiesel in combination with diesel generators)
are not in scope of the demonstration.
Furthermore, projects proposals should foresee to exchange information with the BRIDGE
project 56 and to elaborate on the suitability of the demonstrated solutions for crisis
intervention after disasters.
This topic will contribute to the Challenge #2 (Off-grid access to electricity) of Mission
Innovation.
Proposals are expected to bring the technology from TRL 6-7 to 7-8.
The Commission considers that proposals requesting a contribution from the EU of about
EUR 5 million would allow this challenge to be addressed appropriately. Nonetheless, this
does not preclude submission and selection of proposals requesting other amounts.
Expected Impact: Successful projects will demonstrate the attractiveness of renewable

integrated container solutions for off-grid communities in diverse physical landscape and
climate conditions by lowering the overall costs of the renewable energy generation and
energy system components while ensuring their robustness, reliability, sustainability and
autonomous operation.
Annexes.
LC-SC3-RES-18-2020: Demonstration of the solutions based on renewable sources that

LC-SC3-RES-19-2020: Demonstration of floating wind farms
56
https://www.h2020-bridge.eu

LC-SC3-RES-20-2020: Efficient combination of concentrated solar power (CSP) and

desalination (with particular focus on the Gulf Cooperation Council (GCC) region) 68
Renewable Fuels for transport)
Renewable Fuels for transport
The actions address the competitiveness of the next generation of biofuels and renewable fuel
technologies as well as the up-scaling of advanced biofuels for specific transport needs in a
cost-effective way. Furthermore, they aim at achieving European leadership in global
development of specific disruptive technologies for a complete ultimate replacement of fossil
fuels.
Drop-in renewable fuel solutions for fossil-fuel substitutions

LC-SC3-RES-21-2018: Development of next generation biofuels and alternative

renewable fuel technologies for road transport
Specific Challenge: Current biofuel and renewable fuel technologies are still not competitive
compared to technologies of fossil fuel alternatives. This impedes their further development
and market penetration. The specific challenge is to increase the competitiveness of next
generation biofuel and renewable fuel technologies while diversifying the fuel supply
pathways.
Scope: Support will be given to next generation non-food/feed drop-in biofuel and alternative
renewable fuel technologies for energy and transport, which improve substantially beyond the
state-of-the-art the performance as regards conversion efficiency, cost and feedstock supply,
as well as end use compatibility. Proposals have to address one of the following:
 liquid diesel- and gasoline-like biofuels from biogenic residues and wastes through
either chemical, biochemical and thermochemical pathways, or a combination of them;
 liquid gasoline-like biofuels through biogenic upgrading of biogas.
Proposals are expected to bring the technology from TRL 3-4 to 5 (please see part G of the
General Annexes).
Expected Impact: Projects are expected to reduce costs and improve performance of
renewable fuels, notably as regards the efficiency, the environment and the society. The
proposed solution will contribute to strengthening the EU leadership in this area.

Annexes.
LC-SC3-RES-22-2018: Demonstration of cost effective advanced biofuel pathways in

retrofitted existing industrial installations
Specific Challenge: Commercialization of advanced biofuels depends on up-scaling of the

technologies. The specific challenge is to overcome the high cost and high risk of the
installation of industrial plants for advanced biofuels. This challenge is in line with priorities
identified in the context of the SET-Plan57for commercialization of advanced biofuels.
Scope: Proposals will demonstrate cost-efficient advanced biofuel pathways which improve
the economic viability and reduce capital expenditure (CAPEX) and operating expenses
(OPEX). This is to be done through retrofitting of existing industrial installations with
necessary innovation specific to the proposed advanced biofuel pathway. Proposals will
address integration in first generation biofuels sites, in pulp and paper industry or in existing
fossil refineries with production of advanced biofuels at a scale of a few thousand tons
through upgrading the existing sites with innovative installations. The economic feasibility
and other socio-economic benefits including the impact on current first generation sites will
be included and clearly demonstrated. Proposals will provide information about the expected
CAPEX and OPEX improvements.
Proposals are expected to bring the technology from TRL 5 to 7 (please see part G of the
General Annexes).
Expected Impact: The supported projects are expected to increase the industrial installed
capacity for advanced biofuels. and show the socio-economic benefits.
Annexes.
Upscaling renewable fuels production

LC-SC3-RES-23-2019: Development of next generation biofuel and alternative

renewable fuel technologies for aviation and shipping
Specific Challenge: Decarbonising the aviation and shipping transport sectors, which are
expanding fast and increasing the overall fossil fuel consumption, relies on biofuel and
renewable fuels. The specific challenge is to increase the competitiveness of next generation
57
https://setis.ec.europa.eu/implementing-integrated-set-plan/renewable-fuels-and-bioenergy-ongoing-work

biofuel and renewable fuel technologies in aviation and shipping, compared to fossil fuel
alternatives.
Scope: Proposals will develop next generation non-food/feed drop-in biofuel and alternative
renewable fuel technologies for aviation and shipping transport, which improve substantially
beyond the state-of-the-art the performance regarding conversion efficiency, cost and
feedstock supply by addressing:
 liquid jet-like biofuels and alternative renewable fuels from biogenic residues and wastes
through chemical, biochemical and thermochemical pathways, or a combination of them;
and
 bunker fuel-like biofuels for shipping uses.
General Annexes).
Expected Impact: The supported projects are expected to reduce costs and improve
performance of renewable fuels for aviation and shipping regarding the efficiency, the
environment and society. The proposed solution is expected to contribute to achieving
European leadership in this area.
Annexes.
LC-SC3-RES-24-2019: Boosting pre-commercial production of advanced aviation

biofuels
Specific Challenge: The aviation transport sector is growing fast and is expected to be
responsible for more than 10% of the global greenhouse gas emissions by 2050. Advanced
biofuels achieve direct emission reductions and, as drop-in fuels, are the most attractive
alternatives for reducing the carbon foot-print of aviation in the long-term. Due to the absence
of a market, the specific challenge is to boost commercial availability of advanced biofuels for
aviation. This challenge is in line with the specific targets for commercialization of advanced
biofuels identified in the Declarations of Intent in the context of the SET-Plan58.
Scope: Proposal will demonstrate pre-commercial production of sustainable and cost-

competitive advanced biofuels for aviation for boosting their market up-take. Proposals will
address large-scale production of aviation biofuels from non food/feed sustainable feedstock
and through certified pathways according to international aviation fuel standards and thus
58
https://setis.ec.europa.eu/implementing-integrated-set-plan/renewable-fuels-and-bioenergy-ongoing-work

suitable for commercial flight operations. 30 to 50 thousand tonnes of aviation biofuel and
continuous plant operation of 1000 hr within the project will be included.
General Annexes).
Expected Impact: The supported projects are expected to facilitate the market entry and
increase the commercial capacity of advanced biofuels for aviation. In particular, it is
expected that pre-commercial plant(s) for advanced biofuels for aviation will be accomplished
and the deployment of their technologies will allow the competitive production of biojet fuels
on a commercial scale.
Annexes.
Diversifying feedstock
LC-SC3-RES-25-2020: International cooperation for Research and Innovation on advanced
biofuels and alternative renewable fuels
LC-SC3-RES-26-2020: Development of next generation biofuel and alternative renewable

fuel technologies from CO2 and renewable energy (Power and Energy to Fuels)
LC-SC3-RES-27-2020: Demonstration of advanced biofuels production from aquatic biomass
Market Uptake Support
LC-SC3-RES-28-2018-2019-2020: Market Uptake support59
Specific Challenge: Since the adoption of RES Directive in 2009, most Member States have
experienced significant growth in renewable energy production and consumption, and both
the EU and a large majority of Member States are on track towards the 2020 RES targets. The
"Clean Energy for all Europeans" package adopted at the end of 2016 introduces further
targets towards 2030 and introduces modifications in the energy market design that will
empower individuals or communities to participate actively to the energy system
transformation. Renewable energy technologies have the opportunity to play a crucial role in
this transition, leading to an increased share of renewable energy consumed in the EU and to a
more active role for the consumers. However, introducing and deploying at large scale new
and improved technologies entails a number of challenges, notably as regards their initial high
59

cost, the consumer acceptance and the legal and financial barriers arising from bringing novel
solutions to a technical environment with already reliable solutions in place.
Scope: The proposal will develop solutions which can be easily implemented for overcoming
barriers to the broad deployment of renewable energy solutions. In particular, the proposal
will address one or more of the following issues:
 Recommendation for harmonisation of regulations, life cycle assessment approaches,

environmental impact methodologies of renewable energy solutions;
 Development of additional features for RES to be compliant with the electricity market
requirements, making them "market fit", such as developing the possibility to provide
additional services to the grid such as peak power and having an active role in electricity
balancing/reserve market;
 Support sharing of best practice between public funding bodies for the cross-border
participation in RES electricity support schemes, increasing the use of the "RES co-
operation mechanisms" foreseen in the legislation;
 Development of insurance schemes to be available to developers in Europe and

worldwide to mitigate risks, such as in geothermal drilling and offshore installation;
 Development of innovative financing mechanisms, schemes and sharing of best practices

for cost-effective support for uptake of renewable sources, such as through the use of
Public Procurement of Innovative Solutions instrument or smartly designed tenders;
 Development of support tools to facilitate export markets, especially for technologies

where export market potential is much higher than internal market e.g. for hydropower.
The focus will be on capacity building for market activities in developing and emerging
countries, including identifying research needs, within the objectives of developing
country- specific technologies and solutions, and/or adapting existing ones, taking into
account local aspects of social, economic and environmental sustainability. Participation
of developing and emerging countries is encouraged, in particular if these countries have
identified energy as a priority area for their development and whenever common interest
and mutual benefits are clearly identified.
 Development of tools (methods and models) for environmental impact assessments of

renewable energy projects;
 Development of tools or services using global earth observation data, (such as those
available through COPERNICUS), to support development and deployment of
renewable energy sources;
 Determining conditions and defining options for retrofitting existing energy and
industrial installations (first generation biofuels, pulp and paper, fossil refineries, fossil
firing power and Combined Heat and Power (CHP) plants) for the complete or partial
integration of bioenergy, with concrete proposals for such retrofitting for the different

cases of bioethanol, biodiesel, bio-kerosene, intermediate bioenergy carriers and other

advanced biofuels and renewable fuels and biomass based heat and power generation, on
the basis of the assessment of the capital expenditure (CAPEX) reduction and market
benefit;
 Development of optimisation strategies regarding cost, energy-performance and LCA for

bioenergy and sustainable renewable fuels in upgraded energy and industrial
installations;
 Development of cost-effective logistics, feedstock mobilisation strategies and trade-

centres for intermediate bioenergy carriers.
For all actions, the consortia have to involve and/or engage relevant stakeholders and market
actors who are committed to adopting/implementing the results. The complexity of these
challenges and of the related market uptake barriers calls for multi-disciplinary research
designs, which should include contributions also from the social sciences and humanities.
Where relevant, regional specificities, socio-economic, spatial and environmental aspects
from a life-cycle perspective will be considered. Where relevant, proposals are expected to
also critically evaluate the legal, institutional and political frameworks at local, national and
European level and how, why and under what conditions these (could) act as a barrier or an
enabling element.
EUR 1 to 3 million would allow this specific challenge to be addressed appropriately.
amounts.
Expected Impact: It is expected that the solution proposed will contribute to:
 Facilitate the introduction of these technologies and increase the share of renewable
energy in the final energy consumption;
 Lead to substantial and measurable reductions for project developments, whilst still fully
addressing the needs for environmental impact assessments and public engagement;
 Develop more informed policy, market support and financial frameworks, notably at
national, regional and local level, leading to more cost effective support schemes and
lower financing costs for RES facilities.
Annexes.
Smart and clean energy for consumers
The Clean Energy for all Europeans package places consumers firmly at the centre of the
energy transition, with consumers considered as active market players in the energy system.

The future consumer should be better informed and more aware, and have an increased
capacity to fully engage in energy markets.
Such a transition requires consumers to change their energy consumption behaviour and
increase their uptake of different forms of active demand solutions and services, including
collective actions. To this end, remaining regulatory and market barriers for consumers
should be addressed and innovative engagement and support schemes should be made more
readily available to consumers, allowing for improved understanding of the benefits of
engaging actively in the energy system. At the same time, it is important to develop a better
understanding of the drivers of consumer acceptance and behaviour change in relation to
energy efficiency.
Although the energy transition is expected to lead to a number of benefits for consumers,
energy poverty continues to affect the quality of life of a significant number of European
citizens. In combination with financial interventions and building retrofitting, low-cost
measures at the household level and use of renewable energy are key solutions in alleviating
energy poverty. Energy distributors under the energy efficiency obligation schemes, and
public authorities play a central role in delivering energy efficiency measures and providing
sustainable solutions to affected households.
Consumers may also play in the future an important role in engaging in clean energy, in
particular in the decarbonisation of the electricity system which currently integrates 30% of
production from renewable energy sources. We should therefore already test today what are
the right incentives that can be put in place so as to reward them when playing a role in
increasing the share of variable renewables in the electricity mix by, for example, by differing
their consumption depending on the availability of this 'green' electricity. To be successful,
the R&I community should not look only at consumers from an electricity grid perspective but
make particular effort to understand how consumers consider, use and value the electricity
grid and the services it provides to them.
Activities supported in this area contribute to the specific objectives, targets and relevant
Implementation Plans of the SET Plan action 360.
LC-SC3-EC-1-2018-2019-2020: The role of consumers in changing the market through

informed decision and collective actions61
Specific Challenge: A precondition for active demand is for consumers to be aware of their
own potential to permanently or temporarily reduce energy consumption; and moreover, for
them to know how to offer this potential to the market and what it would represent in terms of
monetary value by bringing benefits to the energy system.
60
61

Different forms of collective action have the potential to assist consumers in forming critical
mass and to facilitate increased uptake of energy efficiency & active demand solutions and
services. Although collective actions on energy efficiency have emerged in recent years, a
lack of awareness on the potential benefits of such actions, together with regulatory barriers,
continues to hamper their full development and uptake.
Finally, important challenges involve installed appliances (such as boilers for space and/or
water heating) of which a big share is inefficient and fossil-fuel based, resulting in increased
fuel consumption and fuel costs for households. Informing consumers of the potential energy
savings and their monetization, as well as other benefits such as increased comfort and
improved air quality, can result in increased motivation for replacing inefficient appliances,
thereby permanently reducing consumption.
Scope: 2018:
The proposed action should develop activities informing and motivating consumers to change
old and inefficient installed appliances with the highest energy saving potential (e.g. boilers,
local space heaters, air heaters) to more efficient and clean energy heating and/or cooling
solutions. While financial aspects (cost savings, payback period) would be the main
motivating factor and therefore should be presented in a precise and credible manner, other
aspects such as increased comfort and aesthetics, safety, improved air quality, or possible
participation in demand-response should be the integral part of the actions in order to unlock
the full potential of multiple benefits of energy efficiency improvements.
2019:
The proposed action should set up and/or support energy communities (consumer
cooperatives, consumer collective purchase groups, and/or other consumer driven collective
actions) to increase energy efficiency and/or optimise energy management to integrate a
higher share of renewable energy (generated locally or provided from the grid) within the
community by, for example, combining collective solutions to distributed generation,
distributed storage, and/or demand-response aggregation. The focus of the proposed action
should be on households, however, this does not preclude the complementary involvement of
non-residential buildings.
The proposed action should cover the following points:
 Identify and address regulatory barriers and contractual conditions with utilities,
suppliers, grid operators, technology providers etc. for cooperative actions, possibly
linking activities with structural solutions involving public authorities;
 Demonstrate that collectively organised energy-related actions are financially viable and
attractive to the consumer-members of the energy community.
In addition, the proposed action could cover the following points, as relevant:

 Identify and implement solutions to address split incentives (e.g. allowing tenants to set
up/join the consumer driven collective action);
 Demonstrate collective actions of energy consumers based on the solutions and business
approaches using digital tools and technologies (such as digital platforms or blockchain
transactions). If the proposed action includes smart home/IoT solutions, it should link to
the developments under the call DT-ICT-10-2018: Interoperable and smart homes and
grids.
Relevant for both years:
The proposed actions should address the risk of "rebound effects" and propose measures to
counteract them, where relevant. All relevant stakeholders necessary for the successful
implementation of the action should be involved and relevant consumer organisations, in
particular, should be either directly involved or their support demonstrated in the proposal.
Proposed actions should also take issues of consumer data ownership and data privacy into
account, where relevant. The proposed actions are invited to build on experiences and lessons
learned in other relevant projects and programmes62.
amounts.
the impacts listed below using quantified indicators and targets, wherever possible:
 Contribution to reducing regulatory barriers and improving contractual conditions;
 Increase domestic uptake of energy efficient products and services;
 Involvement of at least 5.000 consumers per million Euro of EU funding.
possible:
62
This should include e.g. LIFE projects, the implementation of Air Quality Plans and the implementation of
Operational Programmes under ESIF, H2020 projects, Intelligent Energy Europe projects, and other relevant
national, local, or regional initiatives.

Annexes.
LC-SC3-EC-2-2018-2019-2020: Mitigating household energy poverty63
Specific Challenge: European households continue to spend an increasing share of income on

energy, leading to higher rates of energy poverty and negatively affecting living conditions
and health. Recent estimates suggest that more than 50 million Europeans are affected by
energy poverty64. Although roots of this phenomenon lie mainly in low incomes and poor
thermal efficiency of buildings, energy efficiency measures at the household level and
increased use of renewable energy are key tools in addressing energy poverty and can bring
energy savings, leading to lower fuel costs and improved living conditions. The issue is in
part exacerbated by a lack of sufficient knowledge on how to identify energy poor
households.
In this context, the role of local and national authorities, related networks and initiatives65, and
availability of support schemes are important to ensure the sustainability and larger scale
uptake of the measures.
Energy Efficiency Obligation Schemes 66 can also be used to promote social aims, such as
tackling energy poverty. The obligated parties (utilities) have potentially at their disposal the
necessary data and means to identify energy poverty among their customers and effectively
address it by fulfilling in this way the energy efficiency obligation. Building the capacity of
the obligated parties is needed in order to spread such schemes across the EU.
Scope: Actions should contribute to actively alleviating energy poverty and developing a
better understanding of the types and needs of energy poor households and how to identify
them, taking into account gender differences where relevant, building on any existing
initiatives such as the European Energy Poverty Observatory.
The proposed action should cover one or more of the following:
 Facilitate behaviour change and implementation of low-cost energy efficiency measures

tailored for energy poor households (e.g. provision of information and advice, energy
efficiency services such as draught proofing or optimisation of existing building
technology systems, as well as energy efficiency devices & kits such as low-energy
lighting);
 Support the set-up of financial and non-financial support schemes for energy efficiency
and/or small scale renewable energy investments for energy poor households. These
actions should be embedded in, and add value to, structural frameworks and activities
63
64
Energy poverty generally refers to ‘a situation where individuals or households are not able to adequately heat
or provide other required energy services in their homes at affordable cost'
65
E.g. Covenant of Mayors, European Energy Poverty Observatory, SEAPs.
66
Stemming from art 7 of the Energy Efficiency Directive

involving local, regional, and national authorities, and/or networks such as the Covenant
of Mayors;
 Develop, test and disseminate innovative schemes for energy efficiency/RES

investments established by utilities or other obligated parties under Article 7.
amounts.
The proposed actions are invited to build on experiences and lessons learned in other relevant
projects and programmes67.
the impacts listed below using quantified indicators and targets, wherever possible:
 Investments in sustainable energy triggered by the project in(million Euro);
 Contributions to policy development and to best practice development on energy

poverty;
 Support schemes established for energy efficiency and/or small-scale renewable energy
investments and to be sustained beyond the period of EU-support.
 Involvement of at least 5.000 consumers per million Euro of EU funding.
possible:
Annexes.
LC-SC3-EC-3-2020 - Consumer engagement and demand response
Smart citizen-centred energy system
The EU's energy policy package "Clean Energy for all Europeans" (adopted by the
Commission on 30 November 2016) puts the citizen in the centre of the EU's energy system.
67
This should include e.g. LIFE projects, the implementation of Air Quality Plans and the implementation of
Operational Programmes under ESIF, H2020 projects, Intelligent Energy Europe projects, and other relevant
national, local, or regional initiatives.

Actions are needed to support the best implementation of this ambitious legislative proposal.
Therefore this section of the Work Programme on Integrated Energy Systems aims, among
others, at preparing and testing solutions to support the new proposals for directives and
regulations which are shaping the energy system of the future. In addition, the energy
transition proposed in "Clean Energy for all European" insists on the importance to
decarbonise heating and cooling, electricity and transport.
Therefore two main lines of actions are proposed:
1. Electricity markets and consumers, interacting with other energy vectors with topics LC-
SC3 EC-3-2020 (in the "Smart and clean energy for consumer" area) as well as topics
LC-SC3-ES-1-2019, LC-SC3-ES-2-2019, LC-SC3-ES-5-2018-2020 and LC-SC3-ES-6-
2019;
2. Decarbonisation of local energy systems whether on islands or on the continent with

topics LC-SC3-ES-3 2018-2020, LC-SC3-ES-4-2018-2020 and LC-SC3-ES-8-2019.
These two lines of actions also contribute to the specific objectives, targets and relevant
Implementation Plans of the SET Plan action 4.1 on 'An optimised power grid' and 4.2 on
'Integrated local and regional energy systems'68.
Common requirements regarding proposals relevant to "Electricity markets and consumers,

interacting with other energy vectors" (topic LC-SC3-EC-3-2020 of the previous section, as
well as topics LC-SC3-ES-1-2019, LC-SC3-ES-2-2019, LC-SC3-ES-5-2018-2020 and LC-
SC3-ES-6-2019)
Since the associated directives and regulations will be negotiated with the Parliament and the
Council in the coming years, it is important to ensure coherence and organise a feedback from
the R&I projects towards policy makers. We will therefore pursue the BRIDGE initiative69
which integrates and structures feedback of projects along, for the time being, four lines:
1. Business models
2. Customer engagement
3. Data management
4. Regulation
Ongoing projects of the 2014, 2015 and 2016 calls have delivered first results and the relevant
Innovation Actions from the 2018 to 2020 will also be asked to contribute (i.e. topic LC-SC3-
ES-6-2019-2020 is a priori not concerned). Relevant regulatory issues should be analysed also
in the context of the future electricity market design.
68
69
http://www.h2020-bridge.eu/

Proposers should demonstrate in the content of their proposal a good knowledge and
compatibility with current regulations, available or emerging standards and interoperability
issues applying to their technologies, in particular in connection to ongoing work in the Smart
Grid Task Force and its Experts Groups in the field of Standardization (e.g. follow-up
activities to the CEN-CLC-ETSI M/490), regulatory environment for privacy, data protection,
data management and alignment of data formats (e.g. the work of the ad-hoc group on “My
Energy Data” and its respective follow-up), cyber security, smart grid deployment,
infrastructure and industrial policy (http://ec.europa.eu/energy/en/topics/markets-and-
consumers/smart-grids-and-meters/smart-grids-task-force).
Projects dealing with data handling and management should comply with the provisions of the
General Data Protection Regulation70 and industry standards, especially the Data Protection
Impact Assessment Template 71 . A high level of cyber security should be guaranteed in
compliance with relevant EU security legislation 72 and with due regard of best available
techniques for ensuring the highest level of protection73.
The topics in this area should contribute to test a certain number of approaches proposed in
the legislative package 'Clean Energy for All European' and develop technologies and
solutions which will enable these approaches to be implemented under economic conditions.
Overall, the topics proposed should also contribute to the 2030 Climate-Energy objectives
(40% GHG reduction with respect to 1990, at least 27% of renewables by 2030).
A first group of topics (LC-SC3-ES-1-2019, LC-SC3-ES-2-2019 and ES-5-2018-2020) is

expected to increase the capacity of the European electricity grid to host a larger share of
variable renewables so as to accelerate its decarbonisation. For this purpose, stronger
engagement of consumers is needed, more flexibility services for both distribution and the
transmission grids, higher levels of regional cooperation (i.e. cooperation between a group of
neighbouring countries) at transmission levels and well-functioning retail and wholesale
markets that are capable of financing necessary investments.
A second group of topics (LC-SC3-ES-3-2018-2020, LC-SC3-ES-4-2018-2020 and LC-SC3-

ES-8-2019) is expected to impact on the decarbonisation of energy systems on geographical
islands and at local levels on the mainland taking advantage of the availability of local
renewables resources, the specificity of the demand and of the local energy networks to
design and demonstrate low carbon local energy system.
70
Regulation (EU) 2016/679
71
Supported by the Commission Recommendation 2014/724/EU
72
Directive (EU) 2016/1148
73
Best Available Techniques for data protection and security regarding the ten minimum functional requirements
for smart metering which were proposed in the Commission Recommendation 2012/148/EU.

LC-SC3-ES-1-2019: Flexibility and retail market options for the distribution grid
Specific Challenge: Today, a large share of variable generation electricity sources are
connected to distribution grids that were originally designed to distribute electricity supplied
by large centralised power generation plants through the transmission grid. In view of the
expected growth of variable electricity production, and a shift towards more electrified
heating, cooling and transport sectors, new approaches have to be found for managing
electricity distribution grids in order to ensure affordability of energy, security and stability of
supply, while avoiding massive investments in infrastructures. Electricity storage, in
particular relying on batteries, power to heat/cold, power to X, vehicle to grid and other
storage solutions will play a key role in providing services to the grid and improve and
reinforce the networks capacities.
Scope: Proposals will develop and demonstrate integrated solutions which will allow the
distribution grid to function in a secure and stable manner with large shares of variable
renewables. A combination of at least two of the following elements will be tested:
 Flexibility measures and electricity grid services provided by storage of electricity

(including batteries and vehicle to grid technologies), power to-X (in particular power to
heat), demand response74 and variable generation enabling additional decarbonisation;
 Smart grids technologies for an optimum observability and tools for higher automation
and control of the grid and distributed energy sources, for increased resilience of the
electricity grid and for increased system security, including under extreme climate
events;
 Market mechanisms incentivising flexibility or other market tools should be defined and
tested, for mitigating short-term and long-term congestions or other problems in the
network (e.g. dynamic network tariffs and solutions to reduce the costs of energy
transition, non-frequency ancillary services). Solutions should demonstrate the necessary
cooperation with other system operators and particularly TSOs by facilitating the
integration of wholesale and retail markets.
Replicability and scalability of solutions is desirable to ensure the maximum impact of the use
of the project results.
Proposals should include a task on the analysis of obstacles to innovation under the current
context but also under the future market design context and foresee the coordination on policy
relevant issues and obstacle to innovation (e.g. regulatory framework, business models, data
management, consumer engagement) with similar EU-funded projects through the BRIDGE
initiative75. An indicative budget share of at least 2% is recommended for the research work
associated with these issues and an additional 2% for the coordination effort.
74
Proposers who want to address specifically demand-response should consider topic LC-SC3-EC-3-2020
75

Proposals should build upon the insights and results of projects that have already been
selected in this field under H2020 (information can be found on the BRIDGE web site 76) and
demonstrate their innovative character.
Proposals should comply with the requirements stated in the section 'Common requirements'
of the introduction to the part on the Smart citizen-centred energy system.
Proposers can apply under the following two sub-topics:
1. Flexibility and retail market options for the distribution grid
2. Flexibility and retail market options for the distribution grid: International cooperation
with Canada.
In several international contexts such as the Clean Energy Ministerial, the Mission
Innovation initiative launched at COP21, the International Energy Agency Implementing
Agreement on Smart Grids (ISGAN), bi-lateral discussions between Canada and the EU
identified this topic as being of common interest owing to its potential for
decarbonisation. In line with the strategy for EU international cooperation in research
and innovation (COM(2012)497), international cooperation with Canada is required
under this topic. The cooperation must be under the form of a Coordination Agreement
between the Horizon-2020-funded project with a project with similar scope and sizeable
efforts supported by Canadian funding authorities (see also Eligibility and admissibility
conditions).
Proposals must clearly indicate to which sub-topic they apply.
TRL will range typically between 5 and 8 (see part G of the General Annexes). Proposers will
indicate the estimated levels of TRL at the beginning and at the end of the project.
amounts.
Expected Impact: Projects are expected to develop and demonstrate solutions which
contribute to at least 2 of the following impacts:
 Enhance flexibility of distribution grids which are expected to operate in an overall

context of 50% electricity production from renewables in 2030 (EU28 average, see77);
 Contribute to define the conditions of a well-functioning electricity market which creates

business case for stakeholders willing to provide such flexibility and allow to sustain the
necessary investments (e.g. variable price strategies);
 Improve the capability to manage future energy loads including electrical vehicles;
76
http://www.h2020-bridge.eu
77
EU Reference Scenario 2016: Energy, transport and GHG emission trends to 2050

 Improve distribution grid operations which guarantee security of supply and the use of
flexibility products while integrating large shares of variable renewables avoiding
unnecessary investments by solving congestion.
In the case of sub-topic 2) International cooperation with Canada, the expected impacts of the
cooperation to be substantiated in the proposal are to deliver mutual benefits and added value
(i.e. in addition of the sum of the results of the two projects).
Proposals are invited to identify and substantiate to which of the above impacts they
contribute and include ad-hoc indicators to measure the progress against specific objectives of
their choice that could be used to assess the progress during the project life.
Annexes.
LC-SC3-ES-2-2019: Solutions for increased regional cross-border cooperation in the

transmission grid
Specific Challenge: Today wholesale prices may vary significantly across the different market
zones in Europe showing that the wholesale market is not operating under optimal conditions
while some interconnectors are underutilised. More cooperation between TSOs and between
TSOs and energy producers who are providing cross-border services, in particular at regional
level (i.e. involving a group of countries), is an element that is promoted in the future market
design to contribute to improving this situation.
Scope: Proposals will demonstrate integrated hardware and software solutions for cross
border flows in the transmission grid in a regional context.
Proposals are required to integrate at least four of the following points:
 Improvements of the tools for communication and grid operations, in particular for
intraday and real-time markets involving several TSOs in the context of regional
cooperation; tools to analyse and simulate risks of the system at regional level;
 Better prediction of production from variable renewables and demand response forecast
at regional level;
 Definition and testing of new cross border grid services called by an increasing share of
renewables (flexibility, balancing, decrease of system inertia, congestion, etc.);
 Mechanisms to ensure a well-functioning wholesale market, efficient techniques for

coupling real time markets;
 Enhance cross border flow and trading, enhanced exploitation of assets such as large
bulk storage systems, hydropower plants, large scale batteries installations, etc;

 Demonstration in a regional context. Priority should be given to regions where this

cross-border cooperation between TSOs is being less effective. The demonstration
should be supported by the experience of more advanced regions (intra-EU and inter-
EU); when dealing with EU-border countries, special attention should be paid to reduce
external energy dependence through more efficient cooperation;
 Develop guidelines to avoid distortion resulting from the non-harmonisation of

regulations between countries.
context but also under the future market design context and foresee the coordination on policy
relevant issues and obstacle to innovation (e.g. regulatory framework, business models, data
associated with these issues and an additional 2% for the coordination effort are
recommended.
Proposals should build upon the insights and results of projects that have already been
selected in this field under H2020 (information can be found on the BRIDGE web site 79) and
demonstrate their innovative character.
indicate the estimates levels of TRL at the beginning and at the end of the project.
amounts.
Expected Impact: The supported projects are expected to contribute to enhance regional
cooperation:
 in the operation of transmission grids so as to bring additional flexibility in the context

of an increasing share of variable renewables;
 in optimising infrastructure investments and making best used of large scale assets that
are bringing flexibility;
 in an improved functioning of the wholesale market across borders;
 in the development of future common approaches to grid services.
78
79

Annexes.
LC-SC3-ES-3-2018-2020: Integrated local energy systems (Energy islands)80
Specific Challenge: The fast growth of the energy production from renewable energy sources
offers new and economically attractive opportunities for decarbonising local energy systems
on the mainland (e.g. isolated villages, small cities, urban districts, rural areas with weak or
non-existing grid connections). It is also a technological and financial challenge for the
electricity network. Decarbonisation and energy savings should result from an optimal
combination of these energy sources. In this context, storage of all energy vectors, including
possibilities offered by batteries and electric vehicles, and intensive use of the latest
technologies on power electronics, control and digitisation will certainly play an increasingly
important role. Local energy systems may also show economically interesting conditions to
boost local energy sources and activate local demand-response. Innovative approaches can
result in attractive business cases for both districts and remote areas, including outermost
regions. At the same time, decarbonisation has to go hand-in-hand with the improvement of
local air quality and the acceptance by citizens.
Scope: Proposals will develop and demonstrate solutions which analyse and combine, in a
well delimited system, all the energy vectors that are present and interconnect them where
appropriate.
Proposals should present a preliminary analysis of the local case as part of the content of the
proposal and propose to develop solutions and tools for the optimisation of the local energy
network, but having a high replication potential across Europe.
Local consumers, small to medium industrial production facilities and commercial buildings
should be involved in the projects from the start.
indicate the estimates levels of TRL at the beginning and at the end of the project.
Proposals should include a task on the analysis of obstacles to innovation and foresee the
coordination on policy relevant issues (e.g. regulatory framework, business models, data
80
81

associated with these issues and an additional 2% for the coordination effort are
recommended.
amounts.
In several international contexts such as the Clean Energy Ministerial, the Mission Innovation
initiative launched in COP21, the International Energy Agency Implementing Agreement on
Smart Grids (ISGAN), bi-lateral discussions between India and the EU identified this topic as
being of common interest owing to its potential for decarbonisation. In line with the strategy
for EU international cooperation in research and innovation (COM(2012)497), international
cooperation is encouraged, in particular with India.
Expected Impact: The supported projects are expected to contribute to:
 validate solutions for decarbonisation of the local energy system while ensuring a
positive impact on the centralised energy infrastructure, on the local economy and local
social aspects, and local air quality;
 enhance the involvement of local energy consumers and producers, create energy
communities in the development and the operation of local energy systems and test new
business models;
 validate approaches to safe and secure local energy system that integrates significant
shares of renewables (electricity, heating, cooling, water, wastes, etc.). For variable
renewables, this entails the development of an accurate prediction system for the local
generation of energy and adequate solutions to match the generation with local
consumption as a function of time;
 benchmark technical solutions and business models that can be replicated in many local
regions and that are acceptable by local citizens.
Annexes.

LC-SC3-ES-4-2018-2020: Decarbonising energy systems of geographical Islands82
Specific Challenge: Energy prices on geographical island are typically 100% to 400% higher
than on the mainland; therefore the large-scale deployment of local renewable energy sources
brings economic benefits and, at the same time, contributes to decarbonise the energy system
of the island, reduce greenhouse gases emissions and improve, or at least not deteriorate, air
quality.
Scope: The proposed solutions will contribute to at least 4 of the following objectives:
 Achieve high levels of local renewable energy sources penetration;
 Achieve highly integrated and digitalised smart grids based on high flexibility services
from distributed generation, demand response and storage of electricity, heat, water, etc.;
 Develop synergies between the different energy networks (electricity, heating, cooling,
water, transport, etc.);
 Achieve a very significant reduction of the use of hydrocarbon based energies (ideally
achieve carbon neutral primary energy for all non-transport uses). Modelling, forecasting
of demand (e.g. for touristic/non-touristic seasons) and supply (e.g. based on weather,
wind, sun, etc.);
 Innovative approaches to energy storage, electricity storage in particular relying on

batteries (including avoidance or delay of costly grid upgrades of existing grids).
Projects should also deliver:
 Effective business models for sustainable solutions;
 Practical recommendations arising from project experience on:
 regulatory, legal aspects and data security/protection;
 gender and socio-economics (Social Sciences and Humanities);
 storage solutions (from short to seasonal);
 big data, data management and digitalisation;
 Contributions to environmental sustainability, in particular in view of the specificities of

islands ecosystems.
The TRL will range typically between 5 and 8 (see part G of the General Annexes). Proposers
will indicate the estimates levels of TRL at the beginning and at the end of the project.
context and foresee the coordination on policy relevant issues (e.g. regulatory framework,
82

business models, data management, consumer engagement) with similar EU-funded projects
through the BRIDGE initiative83. An indicative budget share of at least 2% is recommended
for the research work associated with these issues and an additional 2% for the coordination
effort are recommended.
If relevant, synergies should be established with ongoing and planned work on islands in the
'Clean Energy for EU islands' initiative84.
amounts.
Expected Impact: The projects are expected to contribute to
 developing RES-based systems (including heating and cooling and storage) that are
cheaper than diesel generation;
 reduce significantly fossil fuel consumption;
 large-scale replication on the same island and on other islands with similar problems;
 enhance autonomy for islands that are grid connected with the mainland (existing diesel
generators shall be used primarily as security back-up in the long term).
their choice that could be used to assess the progress during the project life. Proposals are also
invited to identify if they impact on future investment perspectives (see also topic LC-SC3-
ES-8-2019).
Annexes.
LC-SC3-ES-5-2018-2020: TSO – DSO – Consumer: Large-scale demonstrations of

generation85
Specific Challenge: The legislative proposals on the energy market that the Commission
adopted on 30 November 2016 (the so-called winter package), in particular the Electricity
Directive, promotes that network operators procure balancing, congestion management and
ancillary services from assets connected to the network both at transmission and at
83
84
http://ec.europa.eu/energy/en/news/clean-energy-eu-islands-launched-malta
85

distribution level, based on cooperation among them.86 This will enable more efficient and
effective network management and optimisation, for the benefit of increased demand response
and the ability to integrate increasing shares of renewables. TSOs and DSOs will use the same
pool of resources: actions by both can mutually affect each other. In cooperation with market
participants, they have to define the services they want to procure, and have to set up ways to
procure them in a coordinated manner.
Scope: The focus is on projects that demonstrate at a large-scale how markets and platforms
enable electricity TSOs and DSOs to connect (in particular through data communications and
common architectures) and procure energy services from large-scale and small-scale assets
connected to the electricity network through a combination of local markets (in particular for
congestion management), with wholesale & balancing markets, in a way that will increase
cost-efficiency in (future) network operations and that creates consumer benefits. The markets
and platforms should enable the integration of relevant digital technologies like Internet-of-
Things, Artificial Intelligence, cloud and big data services. The projects selected will define
and test in real-life demonstrations of integrated system-based markets and platforms for (a
set of) grid services that can be used and procured by DSOs and TSOs in a coordinated
manner, in markets that they jointly set up (but don't necessarily need to operate themselves),
in a way that:
 will lead to the development of a seamless pan-European electricity market that makes it
possible for all market participants (if necessary via intermediaries such as energy
suppliers or aggregators) to provide energy services in a transparent and non-
discriminatory manner;
 enables TSOs and DSOs to give incentives to connected consumers, buildings, devices
(including small-scale generation) to improve predictability and anticipate problems,
based on jointly developed grid-models;
 defines and tests 1) standardised products and key parameters87 for grid services; 2) the
activation process for the use of assets for network services; 3) the settlement process for
payment related to the services;
 facilitates scaling up the platforms and markets to spread its wider use and to increase
liquidity, in particular by facilitating integration of small-scale and large-scale assets,
and by integrating new services into existing platforms and/or links new services to
existing markets as much as possible, by allowing to integrate future network services
that support the energy network transition (e.g. those needed in scenarios with large RES
penetration) and by being compatible across borders in line with EU rules on market
coupling and balancing;
86
see a.o. the proposed Guideline on Electricity Balancing, Article 32 of the proposal for a Directive on the internal
electricity market, COM(2016)864, 2016/0380(COD), Article 53 of the proposal for a Regulation on the internal
electricity market, COM(2016)861, 2016/0379(COD)
87
where such parameters don't exist yet at EU level

 allows procurement based on the specific location and grid conditions (if necessary);
Selected projects also will:
 Define the needs of network operators for system operation, and turn these into services
and products, based on interaction with suppliers, aggregators and energy service
companies, that test what services can be provided by what assets;
 Test the needs of network operators and technological capabilities of the assets,
including to ensure reliability of supply (e.g. duration, ramp-up/ramp-down, islanding);
 Identify the relevant system data that enable market participants to better assess and
forecast the need for grid services and publish such data (as much as possible);
 Test innovative ways to promote consumer participation, engagement and perception,

such as peer-to-peer trading, and innovative ways to reduce transaction costs, such as via
distributed ledgers (blockchain);
 investigate the possibilities for innovative pricing and compensation (including through
local markets) for consumers that provide the grid services, taking into account tariff and
tax systems;
In relation to the organisation, selected projects are expected to:
 Make use of cascading funds for the incorporation of developers of innovative energy
services (in particular for household consumers) by SME’s.
 Coordinate their work with NRA's, ENTSO-E, the DSO organisations and other
stakeholders and take into account the experience from other projects through
cooperation in the BRIDGE initiative88and work with Digitisation of Energy projects,
funded under the following topics:
 SU-DS04-2018-2020: Cybersecurity in the Electrical Power and Energy System

(EPES): an armour against cyber and privacy attacks;
 DT-ICT-10-2018: Interoperable and smart homes and grids;
 DT-ICT-11-2019: Big data solutions for energy.

as well as with the projects funded under topic LC-SC3-EE-13-2018-2019-2020:
Enabling next-generation of smart energy services valorising energy efficiency and
flexibility at demand-side as energy resource where innovative consumer energy
services will be developed and tested regarding their business viability and
consumer acceptance.
TRL will range typically between 5 and 8 (see part G of the General Annexes).
88

amounts.
Expected Impact: Solutions will contribute to a smart, secure and more resilient energy
system through demonstrating cost-efficient model(s) for electricity network services that can
be scaled up to include networks operated by other TSOs and DSOs, and that will be
replicable across the EU energy system and provide the foundations for new network codes,
particularly on demand-response. In so doing they will contribute to opening up significant
new revenue streams for consumers to provide grid services, and increase the share of RES in
the electricity system.
Annexes.
LC-SC3-ES-6-2019: Research on advanced tools and technological development
Specific Challenge: A number of tools and future technologies need to be developed, matured
and tested to cover gaps and/or to prepare the energy system of 2030 and beyond.
Scope: Proposals must address only one of the 4 following sub-topics whereby not necessarily
all points listed in a sub-topic need to be addressed:
1. Advanced modelling tools for:
 the modelling of the future electricity market to study and analyse the impact and
the design of electricity pricing structure from the wholesale markets, to real time
markets (balancing and congestion management) and retail markets;
 modelling and forecasting energy production from variable renewables, associated

frequency and voltage controls issues in the electricity grid and benefits associated
with the use of storage.
2. Advanced tools for
 the design and planning and operation of electricity grid infrastructure including
distribution and transmission level, taking into account environmental concerns,
such as air quality, and footprints and the new constraints from variable renewable
generation, the place and role of storage and flexibility; the optimisation of the use
of existing electricity assets and network capacity;

 the development of grid predictive management strategies with uncertainty

(forecasting plus stochastic grid management tools), improving the maintenance of
electricity assets (distribution and transmission) as well as the associated data
management;
 Enhanced TSO / DSO collaboration and coordination tools, secure data exchange
across networks along whole the value chain, ICT tools for cross-border trading for
nearly real-time balancing; definition of minimum set of specifications to allow
automated digital cross-border electricity market.
 Enabling technologies for reliable and resilient interconnected European electricity

grids, making use of the specific features and the strategic role of the European
Global Navigation Satellite Systems Galileo and EGNOS.
3. Technological developments:
 Develop a new generation of reliable, robust and cost-effective energy storage

technologies, storage management systems, in particular batteries, able to provide
high specific energy rates, large number of life cycles, fast response to the electrical
network demands and low maintenance;
 Power electronics for batteries and software to manage combined or hybridised

decentralised energy systems, also combining several energy vectors: a key focus is
on significant cost reduction of these key components for homes, districts and
larger systems which have the potential to accelerate significantly the energy
transition of the electricity network.
4. International Cooperation with non-EU/Associated country member of Mission

Innovation89 on Mission Innovation Challenge 7 on Affordable Heating and Cooling for
Buildings:
 Develop compact thermal energy storage for electricity load shifting that will take
up electricity from the grid at the peak times, to be used for heating, cooling or hot
tap water at later times. Typical required charging power is 3 kW, for periods of up
to three hours. Integration into the building heating system and in the smart
electricity grid is a key development element together to the storage materials and
technologies.
amounts.
Proposal must clearly indicate which sub-topic 1, 2, 3 or 4 they are targeting.
89
Australia, Brazil, Canada, Chile, People’s Republic of China, India, Indonesia, Japan, Mexico, Republic of
Korea, Saudi Arabia, United Arab Emirates, United States

1. Expected Impact: Advanced modelling tools are expected to: increase the knowledge
on how to design of price structure and magnitude in order to be able to finance e.g.
infrastructure and research and innovation; enhance the accuracy of the prediction of
electricity production from variable renewables and better qualify and quantity
associated issues and remedies
2. Advanced tools are expected to develop new approaches to electricity grid planning,
monitoring and maintenance that are better suited to today's future characteristics of the
grid and enable savings on infrastructure costs.
3. The technological developments are expected to reduce costs of key technology

components to allow European Industry to keep and extend its leadership in power
electronics for stationary battery systems of all sizes (from home to utility scale) and the
integration of battery systems with high shares of renewable electricity and eventually
also heating and cooling.
4. Contribute to the objectives of mission innovation and provide efficient innovative small
scale power to heat/cool flexibility measures that can be deployed in a large number of
buildings so as to enable the grid to operate with large share of variable renewable
energy
Proposals are invited to include ad-hoc indicators to measure the progress against specific
objectives of their choice that could be used to assess the progress during the project life.
Annexes.
LC-SC3-ES-7-2018: Pan-European Forum for R&I on Smart Grids, Flexibility and

Local Energy Networks90
Specific Challenge: According to the JRC Smart Grid Projects Outlook 201491, the majority
of cooperation takes place between organisations from a limited number of Member States
while 15 analysed countries (NO, CH, IE, PL, HU, SK, LT, RO, LV, HR, BG, LU, CY, EE,
MT) account for less than 5 % of the R&I funds altogether.
Scope: The action should set-up a European Forum composed of R&I policy makers, R&I
actors and experts ('community') in the field of smart grids / storage and local energy systems
90
This activity directly aimed at supporting public-public partnerships with Member States and Associated
Countries, technology platforms with industrial partners is excluded from the delegation to INEA and will be
implemented by the Commission services.
91
http://ses.jrc.ec.europa.eu/sites/ses.jrc.ec.europa.eu/files/u24/2014/report/ld-na-26609-en-
n_smart_grid_projects_outlook_2014_-_online.pdf

that is representative of the EU-28 energy system. The goal is to evolve towards a truly
integrated pan-European R&I community with a high level of synergies, spread and
representativity over a recommended duration of 4 years.
Actions should be proposed to establish and spread the state of the R&I in the field in Europe.
A number of regional workshops where exchanges of experience and capacities between
members of R&I community that are not used to collaborate will be organised where the key
R&I challenges will be identified, discussed and structured. Advantage should be taken of
other events and conferences, preferably well-known and occurring on a regular basis, to
organise such workshops.
Beyond workshops, a methodology should be put in place that will allow developing the
elements stated in the paragraph above on a long term perspective relying on diversified but
combined means (virtual meeting, use of social media, setting up discussion groups,
establishing collaborative working spaces). These new links, new knowledge and potential
future collaboration should materialise through the delivery of reports (e.g. at regional and EU
level).
The European Technology and Innovation Platform Smart Networks for Energy Transition
(ETIP SNET), ongoing Horizon 2020 projects (e.g. the BRIDGE project92) in the field, and
existing associations with a true pan-European dimension will have an important role to play.
This action should also contribute to widen the representativity of European associations in
the field which have weaknesses in their EU coverage.
The consortium should be composed of a limited number of relevant beneficiaries offering the
possibility to invite ad-hoc R&I policy makers, actors and experts when needed. The
consortium should achieve a well-balanced representation at EU level.
amounts.
Expected Impact: The supported project is expected to contribute to:
 Building a true pan-European R&I community in the field of smart grids & associated
flexibility measures / energy systems;
 Establish new collaboration on a long-term perspective which has a potential to develop

into industrial collaborations;
 Building, in the long-term, solidarity and trust for a well-functioning and resilient pan-
European energy system (e.g. contributing to risk preparedness).
92
http://horizon2020-story.eu/contact/

Annexes.
LC-SC3-ES-8-2019: European Islands Facility - Unlock financing for energy transitions

and supporting islands to develop investment concepts
Specific Challenge: Mobilising investment in energy efficiency and renewables is key for
Europe's energy transition. In 2017 the European Commission and 14 EU Member States
signed a political declaration to launch the new 'Clean Energy for EU Islands' initiative. Its
aim is to help islands reduce their dependency on energy imports by making better use of their
own renewable energy sources and embracing more modern, socially inclusive and innovative
energy systems.
Europe's more than 2200 inhabited islands can be considered living-labs which can deliver a
pipeline of energy investment projects across Europe. Energy transitions on islands often
benefit from low opportunity costs due to the existing high prices of conventional liquid fuels
in contrast to the variety of renewable sources they may have available.
However, despite tremendous potential, too few islands in Europe succeed in developing and
scaling up investment packages. A high degree of organisational, technical and financial
innovation is needed to reach significant scale. A key gap is the lack of capacity for islands to
transform their overall long-term ambitions into a credible set of plan(s) and project outlines,
i.e. investment concepts, that serve as the basis for concrete projects. In particular, local
initiatives and/or public authorities on islands have limited resources to access the analytic,
financial and legal expertise needed to collect additional data and develop an investment
programme of scale i.e. pooling projects and/or developing financing strategies which
demonstrate sufficient maturity to enable access to different sources of finance often
mobilised locally on the island.
In order for islands to be microcosms of economic, social and environmental transformations

they may often require assistance in designing coherent set of projects and selecting the most
cost-effective option from the life-cycle perspective, aggregating smaller projects into island-
size packages and in mobilising the significant amount of finance needed for a full energy
transition. This may also include communication and engagement actions among island
inhabitants to identify acceptable projects, which also can lead to projects co-ownership and
mobilisation of local financing.
The investment concepts would allow a large number of islands and regions to access the
various innovative financing streams which are being structured (e.g. PDA, ESIF Financial
Instruments, National Investment Platforms), to increase the absorption rates of EFSI and to
access private finance.
Scope: Proposals are expected to set up and run a 'European Islands Facility' which offers
expertise and/or financial support and services to islands:

 The Islands Facility should offer expertise and/or financial support to develop, within a
limited period of time, innovative cost-effective investment concepts based on (or the
development of – if they do not yet exist) a transition plan and a coherent set of projects
that will lead to a decarbonised, efficient and resilient island energy system using local
energy flows and resources;
 The Islands Facility should be able to provide, inter-alia: translation of ambitions into a
holistic energy transition plan, assistance in modelling of the energy transition on the
island(s), a clear identification of the individual potential project pipeline(s), legal
analysis and support, a description of how the investments will be financed and, if
relevant, how the financing will be mobilised locally, advice on available funds and a
design of the process to launch the investments. It can also cover the support for
information and engagement actions among the islands inhabitants in the view of
ensuring their acceptance, projects participation and co-ownership, also mobilising local
financing;
 The Islands Facility should develop in-house expertise to coordinate, support the
implementation and critically evaluate the outcomes on the above-mentioned issues, i.e.
preparation of energy transition plans, modelling of the energy transition on the islands,
identification and financing of project pipelines, legal analysis, so that it will create
synergies between requests for assistance from different islands;
 Besides the technical assistance, the Islands Facility will maintain a public, searchable
portal with the energy transition plans and project proposals that it has supported and
developed, share and spread knowledge and best practices based on a sound and
inclusive outreach strategy, with the aim to engage as many islands as possible in the
energy transition;
 Proposals should foresee to provide support to third parties ('support scheme') as

described in part K of the General Annexes of the Work Programme. At least 30%, and
up to 70%, of the budget should be directly allocated for spending to island cities,
municipalities or their groupings;
 Proposals should demonstrate that they are deeply rooted in the ecosystem of island
communities, of sustainable energy planners and project initiators, and of the financing
community of energy efficiency and energy system transformations;
 Proposals should include a strategy to include contributions from 3rd parties to its
funding such as local, regional or national authorities (while maintaining autonomy in its
activities), and a strategy to continue its work after the granted budget is finished;
 Proposals should demonstrate that they are able to mobilise a critical mass of islands and
set up the support scheme of the Islands Facility in accordance with H2020 standards;
 Proposals have to foresee services to underpin European added value and earmark
appropriate resources (at least 30%, and up to 70%, of the requested EU contribution) to

make experts available directly to the islands, provide the necessary quality control over
the experts' outputs, and ensure that the results are used by other islands;
 Proposals should demonstrate how they are able to select and prioritise islands for
support under this facility, based on the following requirements: in order to qualify for
support through the Islands Facility, islands must demonstrate proof of political
commitment, an ambitious scale of potential investment and level of energy savings
relevant to the island, investment sector targeted and type of financial solution
envisaged, governance to develop the investment concept, a plan for long-term capacity
building within the public administration, a plan on how they will include citizens and
other stakeholders, and a commitment for monitoring for 2 years;
 Proposals should include a task to establish links and synergies with R&I projects
selected under LC-SC3-ES-4-2018-2020: Decarbonising energy systems of geographical
Islands under the BRIDGE initiative.
The Commission considers that proposals requesting a contribution from the EU of 10 million
EUR would allow this specific challenge to be addressed appropriately. Nonetheless, this does
not preclude submission and selection of proposals requesting other amounts.
 Demonstration and documentation of increased leveraging of finance into energy

transition investments by public authorities;
 Overall, for every million Euro of Horizon 2020 support the action should trigger energy
transition investments worth at least EUR 10 million;
 Number of investment concepts delivered, and number of concepts that turned into
tangible investments after the provided support;
 Number of public authority staff with increased capacity for developing investible
energy transition projects;
 Innovation uptake by potential replicators;
 Primary energy savings, GHG reductions, renewable energy production and investments
in sustainable energy triggered by participating public authorities after the support of the
action (respectively in GWh/year and in million EUR of investments).
Annexes.

LC-SC3-ES-9-2019: ERA-NET Co-Fund Enhanced cooperation in Digitalisation of

Energy Systems and Networks93
Specific Challenge: Beyond direct efficiency gains and cost savings, digitalization holds the
potential to catalyse fundamental, system-wide changes in Energy Systems and Networks. As
digitalisation advances, a highly and cross-sectoral interconnected system of energy systems
and infrastructures can emerge, with increasing opportunities for integration of renewables
and efficient energy management. Electricity is likely to be the first energy sector impacted,
digitisation enabling stronger connections to the heating and cooling sector, in particular in
buildings and the mobility sector.
Digitalisation can also foster enhanced the participation of stakeholders in local, regional and
European value chains. Local communities and prosumers may gradually begin to leverage
the opportunities for their involvement in energy communities and energy transactions and
boost European innovation and businesses.
In order to achieve this, energy stakeholders must work hand in hand with highly innovative
newcomers and lateral thinkers that have a “digital mindset” (e.g.: the block chain
community) and also integrate the know-how and experience from other sectors. The
approach should also engage potential customers such as infrastructure operators, local
industries or communities and end-users in value chains from the local and regional up to the
European and global levels.
Therefore, support is needed for the development of future digital platforms, applications and
business which maximize benefits for European citizens while incentivising a sustainable,
secure and resilient energy system where data protection is guaranteed. Coordinated
transnational Research, Demonstration and Innovation actions has the potential to make a
large impact.
Scope: Proposals should coordinate national (or regional) energy and Information and
Communication Technology (ICT) research, demonstration and innovation programs and pool
the necessary financial resources with a view to implementing joint calls for proposals
resulting in grants to third parties with EU co-funding in this area.
The scope of activities should include
 The establishment of transnational innovation ecosystems for technology, systems and

services that support designing, implementing and testing technical and business services
for the future energy systems, building on available ICT platforms and tools; these
should enable the participation of SME's and start-ups and develop scalable,
customizable and replicable solutions applicable from local through interregional and up
to global level.
93
This activity directly aimed at supporting public-public partnerships with Member States and associated
countries, technology platforms with industrial partners and earth observation networksis excluded from the
delegation to INEA and will be implemented by the Commission services.

 The coordination and linking of living labs94 that facilitate the development and testing
of prototypes, bringing innovative solutions from TRL4 (proof of concept) to TRL7.
This shall enable the sharing of development and test facilities, allowing testing with
hundreds of nodes representing real life operating conditions including failures,
behaviour and misuse of the solution, as well as gaining experiences for the design of
new market and business models.
 Connect networks of procurers in different countries and regions, which gather potential
buyers and users of the solutions at an early stage, in order to help to understand the
needs and requirements for more and more software dominated solutions.
 Activities to connect start-ups and investors to reflect on market driven applications.
 Establish methodologies and transnational process chains in conformance with European

standards, such as SGAM/M490 and ISO/TR 28380, to implement and achieve
interoperability of electronic data exchanges in heterogeneous energy-related ICT
systems.
 Coordinate their work with NRA's, ENTSO-E, the DSO organisations and other
stakeholders and take into account, build on, and work with Digitisation of Energy
projects, funded under the following topics:
1. LC-SC3-ES-5-2018-2020: TSO – DSO – Consumer: Large-scale demonstrations of

generation
2. DT-ICT-11-2019: Big data solutions for energy;
3. DT-ICT-10-2018: Interoperable and smart homes and grids;
4. SU-DS04-2018-2020: Cybersecurity in the Electrical Power and Energy System

(EPES): an armour against cyber and privacy attacks;
5. LC-SC3-EE-13-2018-2019-2020: Enabling next-generation of smart energy

services valorising energy efficiency and flexibility at demand-side as energy
resource.
Proposals should make use of state of the art innovation methodology (such as co-creation,
design thinking, policy lab) to the community of solution designers to ensure high quality and
highly dynamic communication between involved stakeholder groups. Proposals should
include the set-up of a knowledge platform and promote transnational mutual learning.
Requirements in terms of funding rates for the ERA-NET Co-fund instrument can be found in
the General Annexes of the work programme.
94
A living lab is a user-centered, open-innovation ecosystem often operating in a territorial context (e.g. city,
agglomeration, region), integrating concurrent research and innovation processes (co-creation), potentially
relying on a public-private-people partnership.

The Commission considers that proposals requesting a contribution in the range of EUR 10
million would allow this specific challenge to be addressed appropriately. Nonetheless, this
does not preclude submission and selection of proposals requesting other amounts.
Expected Impact: Overall, proposals are expected to enhance the collaboration of regional and
national ICT and energy programs and their stakeholder communities, to leverage associated
research and innovation / development funds and existing tools and outcomes from former
European initiatives like e.g. the Internet of Energy projects FINSENY 95 and FINESCE96 and
contribute to the objectives of SET-Plan Action 4 on 'Increasing the resilience and security of
the energy system'97. Proposals should also contribute to develop need driven implementation
environments on regional and local levels.
More specifically, proposals are expected to:
 Accelerate the development of transnational innovation ecosystems, promote the

engagement of innovative SME's and start-ups in digital energy systems and solutions,
contribute to create new business opportunities, growth and jobs in European regions;
 Foster the emergence of transnational initiatives and living labs, rationalise the use of
test facilities, produce robust approaches to the use of digital systems;
 Activate networks of procurers so as to reach the critical mass needed to develop global
solutions that can be customised to local / regional needs;
 Emulate local innovation forces and close to market thinking of start-ups and investors;
 Promote the development of interoperable solutions enabling wider impact and use of
applications, systems and services.
Type of Action: ERA-NET Cofund
Annexes.
Smart Cities and Communities
LC-SC3-SCC-1-2018-2019-2020: Smart Cities and Communities98
Specific Challenge: The COP21 Paris Agreement recognises the role of cities and calls on
them to rapidly reduce greenhouse gas emissions and adapting to climate change. The EU is
committed to implementing the 2030 Agenda for Sustainable Development, including
Sustainable Development Goal 11 ("Make cities inclusive, safe, resilient and sustainable").
95
http://www.fi-ppp-finseny.eu/
96
http://www.finesce.eu/
97
https://setis.ec.europa.eu/actions-towards-implementing-integrated-set-plan/implementation-plans
98

Many forward-looking cities have set themselves climate goals whose achievement rests on
wide scale roll out of highly integrated and highly efficient energy systems.
To achieve the necessary energy transition in cities, it is essential to increase energy systems
integration and to push energy performance levels significantly beyond the levels of current
EU building codes and to realize Europe wide deployment of Positive Energy Districts by
205099.
This call will also contribute to the specific objectives of the SET Plan action 3.2 - Smart
cities and communities - focussing on positive-energy blocks/districts100.
Scope: Integrated innovative solutions for Positive Energy Blocks/Districts will be developed
and tested and performance-monitored in the Lighthouse Cities. Projects will consider the
interaction and integration between the buildings, the users and the larger energy system as
well as implications of increased electro-mobility, its impact on the energy system and its
integration in planning.
Lighthouse Cities will closely collaborate with the Fellow Cities 101 and should act as
exemplars helping to plan and initiate the replication of the deployed solutions in the Fellow
cities, adapted to different local conditions.
As a sustainable energy transition will see increased electro-mobility, its impact on the energy
system needs to be understood and well integrated in planning.
Definition: Positive Energy Blocks/Districts consist of several buildings (new, retro-fitted or a

combination of both) that actively manage their energy consumption and the energy flow
between them and the wider energy system. Positive Energy Blocks/Districts have an annual
positive energy balance102. They make optimal use of elements such as advanced materials,
local RES, local storage, smart energy grids, demand-response, cutting edge energy
management (electricity, heating and cooling), user interaction/involvement and ICT.
Positive Energy Blocks/Districts are designed to be integral part of the district/city energy
system and have a positive impact on it. Their design is intrinsically scalable and they are
well embedded in the spatial, economic, technical, environmental and social context of the
project site.
99
See also: Communication on Accelerating Clean Energy Innovation -
http://ec.europa.eu/energy/sites/ener/files/documents/1_en_act_part1_v6_0.pdf
100
101
Formerly called Follower cities
102
The data filled in the BEST table (available at the participant portal) will be used by the evaluators to assess
and compare the level of ambition of the technical measures for Positive Energy Blocks/Districts of the project
proposals.

To increase impact beyond the demonstration part of the project, each Lighthouse City and
Fellow City will develop, together with industry, its own bold city-vision for 2050103. The
vision should cover urban, technical, financial and social aspects. Each vision should come
with its guide for the city on how to move from planning, to implementation, to replication
and scaling up of successful solutions.
Proposals should also:
 Focus on mixed use urban districts and positively contribute to the overall city goals;
 Develop solutions that can be replicated/gradually scaled up to city level. The technical,
financial, social, and legal feasibility of the proposed solutions should be demonstrated
in the actual proposal.
 Make local communities and local governments (particularly city planning departments)
an active and integral part of the solution, increase their energy awareness and ensure
their sense of ownership of the smart solutions. This should ensure sustainability of
Positive Energy Blocks/Districts;
 Promote decarbonisation, while improving air quality.
 Incorporate performance monitoring (ideally for more than 2 years) of deployed

solutions from the earliest feasible moment. All relevant performance data must be
incorporated into the Smart Cities Information System database (SCIS)104.
Projects should also deliver:
 Effective business models for sustainable solutions;
 Practical recommendations arising from project experience on:
 regulatory, legal aspects and data security/protection;
 gender and socio-economics (Social Sciences and Humanities);
 storage solutions (from short-term to seasonal);
 big data, data management and digitalisation;
 electro-mobility: i) its impact on energy system and ii) appropriate city planning
measures to support large scale roll-out;
Eligible costs are primarily those that concern the innovative elements of the project needed
to:
103
Building on and further concretising their i) Sustainable Energy Action Plans (SEAP) or ii) Sustainable Energy
(and Climate) Action Plans (SECAP) or iii) a similar, at least equally ambitious plan. These shall be approved by
the corresponding authorities by the end of the project.
104
http://www.smartcities-infosystem.eu/

 connect and integrate buildings;
 enable Positive Energy Blocks/Districts;
 foster innovative systems integration;
 complement the wider energy system.
Costs of commercial technologies are not eligible, for example:
 Buildings: purchase, construction, retrofitting and maintenance;
 Electric vehicles and charging stations: purchase, installation and maintenance;
 City-level ICT platforms: purchase, development and maintenance;
 Standard, commercially-available RES: purchase, development and maintenance.
Projects are expected to cooperate with other Smart Cities and Communities projects funded
under Horizon 2020105 106 as well as the European Innovation Partnership on Smart Cities and
Communities (EIP-SCC)107.
Therefore, proposals should foresee a work package for cooperation with other selected
projects and earmark appropriate resources (5% of the requested EU contribution) for
coordination and communication efforts and research work associated with cross-cutting
issues.
EUR 15 to 20 million108 would allow this specific challenge to be addressed appropriately.
amounts.
Typically, projects should have a duration of 48 to 60 months.
Expected Impact: Projects should contribute to:
 Meeting EU climate mitigation and adaptation goals and national and/or local energy, air
quality and climate targets, as relevant;
 Significantly increased share of i) renewable energies, ii) waste heat recovery and iii)
appropriate storage solutions (including batteries) and their integration into the energy
system and iv) reduce greenhouse gas emissions;
 Lead the way towards wide scale roll out of Positive Energy Districts;
105
http://ec.europa.eu/inea/en/horizon-2020/h2020-energy/projects-by-field/smart-cities-and-communities
106
For the website of the Lighthouse project group, please refer to the Frequently Asked Questions (FAQ).
107
http://ec.europa.eu/eip/smartcities/
108
Indicatively, EUR 6 to 8 million for a Lighthouse city and between EUR 0.5 and 1.0 million for a Fellow city.

 Significantly improved energy efficiency, district level optimized self-consumption,

reduced curtailment;
 Increased uptake of e-mobility solutions;
 Improved air quality.
The higher the replicability of the solutions across Europe, the better.
Annexes.
Enabling near-zero CO2 emissions from fossil fuel power plants and carbon intensive
industries
CCS is one of the key promising technologies that can reduce CO2 emissions in the power
generation sector and the only pathway for very stringent GHG emission reductions from
energy and/or carbon intensive industries that generate CO2 as part of their production
processes.
In order to realise its potential, CCS needs to become a cost-competitive technology and
prove its safety (mainly regarding pipeline transportation and storage), so that it could start
to be commercially deployed and thus contribute to the low-carbon transition of the European
economy. Key challenges are the demonstration of the full CCS chain, the reduction of the
energy penalty and cost of capture, the detailed appraisal of cost-effective storage capacity in
selected regions, and establishing the necessary infrastructure for CO2 transport.
New solutions for the conversion of captured CO2 (CCU) to useful products such as fuels or
chemicals will create new markets for innovative industrial sectors and can play a role in
supporting the deployment of CCS by offsetting the high costs of capture and storage.
The integration of flexible fossil fuel power generation and storage (including through power-
to-X-to-power) will contribute to a smart, secure and more resilient power system.
The Energy Union priorities, also in the area of enabling near-zero CO2 emissions from
fossil fuel power plants and carbon intensive industries, are jointly implemented by the
stakeholder community, national authorities and the Commission through the key actions of
the EU Strategic Energy Technology Plan (SET Plan), notably action 9 (CCUS) and action 4
(resilience, security and smartness of the energy system). To attain these goals, ambitious
R&I targets have been set in agreement with the sectorial stakeholders. In action 9, the focus
is on cost-reductions, new technologies and proliferation of pilots and demonstrators. In
action 4, goals were set to increase the flexibility of fossil fuel power plants. While it is
expected that the Member States will take coordinated actions towards the priorities and
targets set by the SET-Plan, a strong and concerted effort also from the EU is needed to
sustain the technological and economic leading position in some technologies and to catch up
in areas where the EU is lagging behind. Activities supported in this area contribute to the

specific objectives, targets and relevant Implementation Plans of the SET Plan action 9 and
4109.
LC-SC3-NZE-1-2018: Advanced CO2 capture technologies
Specific Challenge: Commercial deployment of CCS requires a significant reduction of the

energy intensity of the CO2 capture process for power plants or other energy-intensive
industries, and a substantial decrease of the cost of capture. A continuous effort is needed to
develop and demonstrate new and advanced capture technologies, including new materials.
Scope: The objective is the validation and pilot demonstration of advanced CO2 capture
technologies that have shown a high potential for reduction of the energy penalty and a
significant overall improvement of cost-efficiency of the whole capture process, but that are
not yet commercial. Projects will test operating conditions and operational flexibility, and
provide proof of the reliability and cost-effectiveness of these concepts, whilst at the same
time evaluating the cost, technical requirements and operational and safety impacts on the
associated transportation infrastructure, storage or utilisation of CO2, as part of their
integration in a CCS cluster based on a whole system approach. The proposal should state
credible and clearly defined targets and key performance indicators (KPIs) for the energy
penalty reduction, the capture rate and the relative incremental operating costs of the capture
process. Environmentally benign technologies have to be pursued and their environmental
impact addressed in the project also in view of future scaling up.
Proposals are expected to bring technologies to TRL 5-7 (please see part G of the General
Annexes). Technology development should be balanced by an assessment of the societal
readiness towards the proposed innovations, including by identifying and involving relevant
end users and societal stakeholders and analysing their concerns and needs using appropriate
techniques and methods from the social sciences and humanities.
The Commission considers that proposals requesting a contribution from the EU in the range
of EUR 5 to 10 million (depending on the degree of demonstration) would allow this specific
challenge to be addressed appropriately. Nonetheless, this does not preclude submission and
selection of proposals requesting other amounts.
Expected Impact: Significant, step-change advances in reductions in energy penalty and thus
in the fuel-dependent cost of CO2 capture, facilitating safe and economic integration into
industrial clusters - which will lower the barriers to the wider uptake of CCS, in particular for
those sectors vulnerable to carbon leakage.
109

Annexes.
CE-SC3-NZE-2-2018: Conversion of captured CO2110
Specific Challenge: Conversion of captured CO2, for example using hydrogen made from
renewable energy, to produce fuels is not only a means to replace fossil fuels, but also a
promising solution for seasonal energy storage. There are still relevant and significant
scientific and technological challenges to be able to exploit the CO2 as a chemical and fuel
feedstock in a systematic manner, the main challenge being that the chemical utilisation of
CO2 is limited by its low energy content, and the conversion process is highly energy
intensive.
Scope: Development of energy-efficient and economically and environmentally viable CO2

conversion technologies for chemical energy storage or displacement of fossil fuels that allow
for upscaling in the short to medium term. Projects have to substantiate the potential for the
proposed CCU solution(s) as CO2 mitigation option through conducting an LCA in
conformity with guidelines developed by the Commission or the relevant ISO standard.
Proposals have to define ambitious but achievable targets for energy requirements of the
conversion process (including catalytic conversion), production costs and product yields, that
will be used to monitor project implementation.
Proposals are expected to bring technologies that have reached at least TRL 3-4 to TRL 5-6
(please see part G of the General Annexes). Technology development has to be accompanied
by an assessment of the societal readiness towards the proposed innovations. Relevant end
users and societal stakeholders will be identified in the proposal, and their concerns and needs
will be analysed during the project using appropriate techniques and methods from the social
sciences and humanities, in order to create awareness, gain feedback on societal impact and
advancing society’s readiness for the proposed solutions.
of EUR 3 to 4 million would allow this specific challenge to be addressed appropriately.
amounts.
In line with the strategy for EU international cooperation in research and innovation
(COM(2012)497), international cooperation is encouraged, in particular with relevant Mission
Innovation111 countries such as China112.
Expected Impact: New solutions for the conversion of captured CO2, either from power
plants or from carbon-intensive industry, to useful products such as fuels or chemicals for
110
This topic contributes to the roadmap of the SPIRE cPPP and to the focus area "Connecting economic and
environmental gains – the Circular Economy".
111
112
A Co-funding mechanism is in place in China; seehttps://ec.europa.eu/programmes/horizon2020/en/news/eu-
china-research-and-innovation-co-funding-mechanism-first-call-launched-china

energy storage (CCU) that will create new markets for innovative industrial sectors, diversify
the economic base in carbon-intensive regions, as well as contribute to achieving a Circular
Economy.
Annexes.
LC-SC3-NZE-3-2018: Strategic planning for CCUS development
Specific Challenge: Establishing the necessary infrastructure for safe and cost-effective CO2
transport and storage is of high importance in Europe. Early CCS projects will most likely
explore CO2 storage sinks in the vicinity of capture points, and the required infrastructure will
therefore most likely be initiated at national level in CO2 hubs and industrial clusters in order
to achieve economies of scale by sharing CO2 transport and storage infrastructure. A cross
border transport infrastructure is ultimately necessary to efficiently connect the CO2 hubs and
industrial clusters to sinks.
Scope: Elaboration of detailed plans for comprehensive European CO2 gathering networks
and industrial clusters linked to CO2 storage sites via hubs, pipeline networks and shipping
routes, with due attention to national and border-crossing permitting and regulatory issues.
Mapping and understanding the nature and longevity of emission sources, identification of
transport corridors and performing initial impact assessments, and developing local business
models for delivery of CO2 capture, transport, utilisation and/or storage (including the
separation of capture, transport, utilisation and storage responsibilities) within promising
start-up regions. Industrial clusters may include for example power producers, cement and
steel factories, chemical plants, refineries and hydrogen production facilities. A hubs-and-
clusters approach could also include the coupling of hydrogen production and CCS, possibly
using common infrastructure. The assessment of cost-effective ('bankable') storage capacity in
selected regions is a key component of strategic planning, as it will provide additional
certainty that the required CO2 storage capacity will be available when needed. Due attention
has to be given to regions with potential for early onshore storage development (including
enhanced oil recovery). Close cooperation with industrial players, as well as engagement with
local stakeholders, is paramount. This includes identifying and involving relevant end users
and societal stakeholders and analysing their concerns and needs using appropriate techniques
and methods from the social sciences and humanities.
amounts.
Expected Impact: Timely strategic planning will enable and accelerate the roll-out of a CCS
infrastructure consisting of capture points and clusters, intermediate hubs, CO2 conversion
facilities, safe and cost-effective CO2 transport and storage. Projects should pave the way for

the development of operational storage sites as from the early 2020's, in particular linked to
carbon-intensive industry. Proposals should clearly demonstrate how their outputs will
contribute to achieving these expected impacts in the short term (up to 3 years), medium term
(3-10 years) and long term (more than 10 years).
Annexes.
LC-SC3-NZE-4-2019: Integrated solutions for flexible operation of fossil fuel power

plants through power-to-X-to-power and/or energy storage
Specific Challenge: With a growing share of energy produced from renewable resources
(RES), fossil fuel power plants will have to increasingly shift their role from providing base-
load power to providing fluctuating back-up power (i.e. ramping up and down) in order to
control and stabilise the grid. These strong fluctuations result not only in increased wear-and-
tear, but (more importantly) also in a lower efficiency and hence higher greenhouse gas
emissions per unit of produced electricity. Severe ramping up and down can be limited
through load-levelling i.e. storing power during periods of light loading on the system and
delivering it during periods of high demand.
Scope: Validation and pilot demonstration of the integration of energy storage and/or use of
excess energy (including via power-to-X-to-power in fossil fuel power plants and showing
that EU emission limits for such installations can not only still be met, but that emissions of
air pollutants can even be reduced. This could include the enabling of the combustion system
to deal with synthetic fuels and/or hydrogen enriched fuels, as well as a better integration of
combined production of heat and power into the overall system.
Proposals are expected to bring technologies to TRL 6-7 (please see part G of the General
Annexes). Technology development has to be complemented by activities to create
awareness, gain feedback on societal impact and advancing society’s readiness for the
proposed solutions.
amounts.
Expected Impact: Solutions will contribute to a smart, secure and more resilient power system
through the integration of energy storage for the purpose of load levelling in fossil fuel power
generation. Results of the project(s) should allow a smoother operation of these plants at
optimal efficiency and environmental performance in order to better adapt to an energy
systems that will increasingly be dominated by intermittent renewable energy.

Annexes.
LC-SC3-NZE-5-2019-2020: Low carbon industrial production using CCUS113
Specific Challenge: CCUS in industrial applications faces significant challenges due to its
high cost and the fierce international competition in the sectors concerned. However, these
sectors currently account for 20% of global CO2 emissions, and in the 2 degree scenario,
should represent half of the stored CO2 by 2050. Relevant sectors with high CO2 emissions
are for example steel, iron and cement making, oil refining, gas processing, hydrogen
production, biofuel production and waste incineration plants.
Scope: Projects will focus on integrating CO2 capture in industrial installations, whilst
addressing the full CCUS chain. Projects will elaborate a detailed plan on how to use the
results, i.e. the subsequent transport, utilisation and/or underground storage of the captured
CO2. Important aspects to address are of technical (e.g. the optimised integration of capture
plant with industrial processes; scalability; CO2 purity), safety (e.g. during transportation and
storage), financial (e.g. cost of capture; cost of integration) and strategic nature (e.g. business
models; operation and logistics of industrial clusters and networks).
Projects are expected to bring technologies to TRL 6-7 (please see part G of the General
Annexes). Technology development has to be balanced by an assessment of the societal
readiness towards the proposed innovations. Relevant end users and societal stakeholders will
be identified in the proposal, and their concerns and needs will be analysed during the project
using appropriate techniques and methods from the social sciences and humanities, in order to
create awareness, gain feedback on societal impact and advancing society’s readiness for the
proposed solutions. Projects should also explore the socio-economic and political barriers to
acceptance and awareness with a view to regulatory or policy initiatives.
amounts.
In line with the strategy for EU international cooperation in research and innovation
(COM(2012)497), international cooperation is encouraged, in particular with relevant Mission
Innovation114 countries such as China115.
Expected Impact: Successful, safe and economic demonstration of integrated-chain CCUS

from relevant industrial sources such as mentioned in the specific challenge will accelerate the
learning, drive down the cost and thus help break the link between economic growth and the
demand for industrial output on one hand, and increasing CO2 emissions on the other hand.
113
114
115
A Co-funding mechanism is in place in China; seehttps://ec.europa.eu/programmes/horizon2020/en/news/eu-
china-research-and-innovation-co-funding-mechanism-first-call-launched-china

The impact of projects under this call will to a large extent be determined by the extent to
which the results will be exploited, i.e. the plan on how the captured CO2 will be actually
utilised and/or stored, either in the project or planned as a future phase. This will be evaluated
based on the maturity and quality of the proposed post-capture solutions. Projects under this
call that are carried out in areas where there is both a high concentration of CO2 emitting
industries and a nearby capacity for geological storage are considered prime sites for hub and
cluster developments, and will generate the highest impact on full-scale deployment in the
medium to longer term.
Annexes.
LC-SC3-NZE-6-2020: Geological Storage Pilots
Joint Actions
The Commission Communication "Towards an Integrated Strategic Energy Technology

(SET) Plan" 116 reiterates that achieving the objectives and ambitions of the Energy Union
requires more effective coordination of research and innovation (R&I) activities to avoid
unnecessary duplication of funding and efforts. Partnerships between organisations in the
public sector, or between public and private sector entities involved in funding energy R&I
activities, are a crucial means of achieving this goal. The Communication also calls for more
joint actions, and specifically mentions Horizon 2020 instruments as a concrete way to
support this objective.
Public funding is essential in supporting new technologies in their early stages, and has been
fundamental in the past in providing the EU with a competitive edge in various energy
technologies. But public funding accounts for only around 19% of all energy R&I funding in
the EU (excluding the nuclear sector), with the rest provided by the private sector. And of
this, only 4% is funding from EU R&I programmes, with the rest coming from national R&I
programmes117. It is therefore crucial that public funding is used as effectively as possible.
The SET Plan provides the strategic framework for the best possible use of this funding.
Topics in this section complement the activities of other public funders in Europe by focusing
on activities with clear European Union added value, and in particular on those with a high
potential to leverage funding from other sources and therefore maximise the reach of Horizon
2020. This is a crucial objective of the SET Plan as well as the overall goal of the European
Research Area.
This section of the Work Programme provides support for joint actions and public
partnerships between European, national and regional funding agencies and procurers through
the use of several Horizon 2020 instruments.
116
C(2015) 6317
117
SWD(2017) 32, 2014 figures.

Topic LC-SC3-JA-1-2018 supports ERA-NET Cofund actions. Topic LC-SC3-JA-2-2018

provides support for the execution of the Implementation Plans produced by of the SET Plan
Temporary Working Groups, which are expected to be endorsed by the SET Plan Steering
Group during 2017 and the beginning of 2018. Topic LC-SC3-JA-3-2018 makes use of
procurement to push forward the research and development of wave energy solutions.
Topics LC-SC3-JA-4-2018 and LC-SC3-JA-5-2020 are linked to Africa and the opportunities
it presents for European research and industry. R&I cooperation in this area will reinforce the
EU commitments under the Paris Agreement, the Agenda 2030 on Sustainable Development
and the Cotonou Agreement. This initiative contributes to achieving the Sustainable
Development Goal on energy by ensuring access to affordable, reliable, sustainable and
modern energy for all. It will also contribute to the priorities set up by the EU-Africa High
Level Policy Dialogue on Science, Technology and Innovation.
The objective of topics included in this area is to facilitate the creation or continuation of
energy R&I public partnerships between the European Commission and/or countries and
regions in Europe and beyond. These public partnerships will have as a goal to contribute to
the objectives and ambitions of the Energy Union and the Strategic Energy Technology (SET)
Plan, and to continue developing a European Research Area in energy.
LC-SC3-JA-1-2018: Joint programming actions to foster innovative energy solutions118
Specific Challenge: The EU needs to accelerate the transformation of its energy system by
bridging the gap between research and commercial deployment with innovative solutions.
Bridging this gap often requires substantial volumes of investment which cannot be allocated
by individual countries or by the European Commission on their own. Mobilising the
necessary investment can only be achieved by pooling together financial resources from
multiple countries, the Commission, and the private sector. This is a challenge because the
funding landscape is complex.
One of the objectives of the SET Plan is to create funding synergies on such a big scale by
organising joint programming actions between the entities responsible for public funding
programmes and the Commission. ERA-NETs are a key instrument for joint programming
actions within the SET Plan, and they also contribute to achieving the objectives of the
European Research Area (ERA). In addition, they can play a key role in achieving the goal of
the Energy Union of moving away from a fragmented system characterised by uncoordinated
national policies and towards an integrated European R&I approach which accelerates the
transformation of the energy system.
118
Countries, and technology platforms with industrial partners is excluded from the delegation to the Innovation &
Networks Executive Agency (INEA) and will be implemented by the Commission services. In the case of energy
efficiency, the activity is not excluded from the delegation to the Executive Agency for SMEs (EASME).

Areas suitable for ERA-NETs will be identified by Member States' / Associated Countries'
representatives in the SET Plan governance bodies (in particular the Joint Actions Working
Group). They will then be developed from the early stages in close collaboration with the
European Commission and with input from the Programme Committee as needed. This
collaboration will ensure that proposed ERA-NETs are in line with energy R&I and SET Plan
policy objectives.
Scope: Actions should aim at coordinating the efforts of participating Member States,
Associated Countries and Regions towards achieving SET Plan objectives and, where they
exist, executing the Implementation Plans jointly developed by SET Plan countries'
representatives, industry and research organisations within the SET Plan priority areas
numbers 1 to 9 119. In establishing their thematic scope, proposals will also take into due
consideration support already provided through other topics in this work programme part. As
for their technology development scope, proposals can support projects addressing any stage
of the innovation chain through joint calls.
Proposals should pool the necessary financial resources from participating national or regional
research programmes with a view to implementing a joint call for proposals resulting in grants
to third parties with EU co-funding. Proposers are requested to also implement other joint
activities, including additional joint calls without EU co-funding.
Proposals shall include provision for at least one joint call without EU funding on top of the
compulsory co-funded joint call.
Proposals shall specify which additional activities will be carried out as part of the action in
accordance with the definition given in General Annex D.
It is expected that actions funded through this topic will bring together national and regional
programme owners and programme managers who represent diverse conditions and
approaches from the EU.
Participation of legal entities from third countries is also encouraged in the joint calls and in
additional joint activities, on the basis of common interest and mutual benefit. Participants
from these countries may request a Union contribution (on the basis of the ERA-NET unit
cost) for the coordination costs of additional activities.
Expected Impact: It is expected that actions will help to:
 Establish long-lasting joint programming research efforts between Member

States/Associated Countries/Regions in areas of common interest;
 Accelerate the time to commercial deployment of affordable, cost-effective and

resource-efficient technology solutions which decarbonise the energy system in a
sustainable way;
119
C(2015)6317, pp.10-13: SET Plan Priorities no.1 to no.9
https://ec.europa.eu/energy/sites/ener/files/documents/1_EN_ACT_part1_v8_0.pdf C(2015)6317, pp.10-13: SET
Plan Priorities no.1 to no.9 https://ec.europa.eu/energy/sites/ener/files/documents/1_EN_ACT_part1_v8_0.pdf

 Reduce the environmental impact of the energy system;
 Make a measurable contribution to the objectives of the Energy Union, the SET Plan,
and the European Research Area;
 Achieve a funding leverage effect of at least 5:1 between national, regional and private
sector contributions, on the one hand, and EU contributions on the other.
Type of Action: ERA-NET Cofund
Annexes.
LC-SC3-JA-2-2018-2019: Support to the realisation of the Implementation Plans of the

SET Plan120
Specific Challenge: The Strategic Energy Technology Plan of the European Union focusses
on ten actions structured around the Energy Union R&I priorities. Its goal is to accelerate the
transformation of the European energy system making it more sustainable, secure and
competitive as a fundamental enabler of a low carbon economy. This strategy relies on a
strengthened partnership among SET Plan countries and the stakeholders from both the
industrial (including the European Technology and Innovation Platforms, ETIPs) and research
communities (including the European Energy Research Alliance, EERA). In 2016, the SET
Plan adopted a set of ambitious targets for its ten actions through a wide participatory process
and the corresponding Implementation Plans will be finalised in 2017 and beginning of 2018.
Scope: Proposals will support, when appropriate, the execution/realisation of a SET Plan
Implementation Plan prepared by one of the following SET Plan Temporary Working Groups
(TWGs):
2018:
 Solar thermal energy (CSP / STE);
 Offshore wind;
 Photovoltaics (PV);
 Ocean energy;
 Deep geothermal systems; and
 Driving ambition in carbon capture and storage deployment.
2019:
120
This activity directly aimed at supporting the development and implementation of evidence base for R&I
policies and supporting various groups of stakeholders is excluded from the delegation to Executive Agencies
and will be implemented by the Commission services.

 Renewable fuels & bioenergy.
Proposals should take into consideration the coordination needs of each specific sector and the
emerging policy priorities for their implementation. Proposals should count with the
participation of research organisations and/or companies (industry) committed in principle to
execute all or some of the SET Plan related R&I activities specified in the corresponding
Implementation Plan as endorsed by the SET Plan Steering Group121. In this sense, proposals
shall detail, to the extent possible, the financial contributions from public and private funding
sources at national level needed for the execution of those R&I activities, and explain which
processes or mechanisms will be put in place to actually execute and monitor the R&I
activities.
Furthermore, proposals shall also establish and implement a dissemination plan to

communicate their output (in connection to the achievement of specific SET Plan targets).
Regardless of other communication means, all outputs shall be fed into the SET Plan
information system (SETIS).
In addition, proposals will ensure the coordination of the outcome of the relevant outputs of
ongoing R&I actions listed in the Implementation Plan contributing to the achievement of the
SET Pan targets.
The actions financed under this topic will be coordinated with the SET Plan Steering Group
through the SET Plan secretariat.
of 1 EUR million per SET Plan Implementation Plan would allow this specific challenge to be
addressed appropriately. This does not preclude submission and selection of proposals
requesting other amounts that should be justified on the basis of the number and volume of
the R&I to be coordinated. The specific characteristics and the different needs for support
among the different SET Plan Implementation Plans needs to be considered. The duration of
the projects should allow for a stable and continuous implementation of the R&I actions
addressed (indicative duration: 3 years).
Expected Impact: The expected impact will be the achievement of the research and innovation
goals of the Energy Union through the implementation of the integrated Strategic Energy
Technology (SET) Plan, in particular the execution of the SET Plan Implementation Plans
endorsed by EU Member States and SET Plan Associated Countries.
Annexes.
121
https://setis.ec.europa.eu/actions-towards-implementing-integrated-set-plan/implementation-plans

LC-SC3-JA-3-2019: European Pre-Commercial Procurement Programme for Wave

Energy Research &Development122
Specific Challenge: The challenge is the design, development and validation of cost-effective
Wave energy convertors that can survive in a harsh and unpredictable ocean environment as
the ocean through demand-driven Pre-Commercial Procurement. The challenge is open to
proposals seeking to steer wave energy research and development in an effective way at a
European level establishing convergence of wave energy technologies and to bring these
technologies to the market.
Scope: In the past years, Member States and the European Commission have been working
closely together to use their public resources via previous Ocean ERA-NET Cofund actions
but like to reinforce their cooperation to address the challenge through a different funding
instrument. In this European PCP action it is the aim to elevate experience with national
public procurement approaches at a European level to bring European Wave Energy Research
and Development more efficiently into the direction of commercialization.
The proposed action is to be structured along the following phases:
Preparation phase: The participating users/buyers of R&D service should agree on common
performance levels and associated specifications for the wave energy systems. The action
should introduce the ocean energy phase gate procedure on a European level.
They will plan the research and the design of actions covering a broad variety of issues. The
PCP will consist of several building blocks addressing different sub-challenges. The funding
of the participating programme owners (national and/or regional) and the European Union
will be used for different stages in the wave energy technology development. The results of
phase 1 should lead to calls for tenders (for the procurement of R&D services) which focus on
clearly identified technologies which contribute to the development of commercial wave
energy devices. The procurement should be also open for developers, researcher organisations
which are not located in the participating countries/regions.
The expected outcomes at this stage: 1) completed tender documents, 2) signed joint
procurement agreement confirming the collaboration modus including the financial
commitment of the buyers group and 3) final confirmation of the lead procurer.
Execution stage: The action will take care for the implementation of the Pre-Commercial
Procurement and of the PCP contracts. The results will be shared within the European
industry to accelerate technology development and the establishment of guidelines and
standards to facilitate the transferability of the knowledge creation. The research and
specification work should lead to at least 3 prototypes tested in an environment close to
expected performance. At the end of the action at least one of the prototypes should be ready
for testing in an operational environment at commercial scale.
122
This activity directly aimed at supporting public-public partnerships with Member States and associated
countries, and technology platforms with industrial partners and earth observation networks and will be

Proposals have to describe the jointly identified challenge, indicating how it fits into their
mid-to-long term innovation plans, why solutions currently available on the market or under
development are not meeting their needs. Activities have to include: (1) networking related to
preparation, management and coordination and (2) joint research activities related to the
validation of PCP strategy.
The consortium should have at least three legal entities established in different member states
or H2020 associated countries. In the consortium the participation of minimum two 'public
procurers' is required. Other entities might be considered which can have a clear added value
in the preparation and/or execution of the PCP or in coordination and networking activities.
Please see part E of the General Annexes for the specific proposal requirements for PCP
actions.
The Commission considers that PCP proposals requesting a contribution from the EU of
between 15 and 20 million would allow this area to be addressed appropriately. Nonetheless,
this does not preclude submission a selection of proposals requesting other amounts.
Expected Impact:
 Convergence of wave energy technologies, acceleration of technology development,

proof-of-concept and validation of wave energy technology for the benefit of the wave
energy sector and as such improved knowledge transfer.
 Pool resources at national and EU levels dedicated to Research and Development and
provide effectively a significant developmental boost of wave energy technology.
 More effective use of public resources for Research and Demonstration.
Type of Action: Pre-Commercial Procurement
Annexes.
LC-SC3-JA-4-2018: Support action in preparation of a Joint Programming activity123
Specific Challenge: Providing sustainable and affordable energy to sub-Saharan Africa is

critical to the development of a region that accounts for 13% of the world’s population, but
only 4% of its energy demand. Sub-Saharan Africa’s energy resources are more than
sufficient to meet its demands, but they are unevenly distributed and under-developed (IEA,
2014).
Building local capacities and promoting research, including applied research, are recognized
to be essential pillars in the development of sustainable energy in Africa. Africa-EU research
123
Countries, technology platforms with industrial partners is excluded from the delegation to Executive Agencies

cooperation in this area can contribute substantially to further technology take-up in the
region. It can also strengthen the market position of involved European institutions through
increased knowledge and competitive capacity.
Several initiatives in the past decade have launched support projects aiming to promote
research addressing African energy challenges. The participation of African researchers in
related calls has however remained limited. African scientists and researchers in general are
underrepresented in the international arena: there are only few scientific publications or patent
applications related to renewable energy, and limited participation in international
conferences. In addition to the limited exposure the international scientific community,
limited research capacities both in the sense of human capital and financial resources hinder
better representation of African researchers in abovementioned funding schemes.
Following the EU commitments under the Paris Agreement, Agenda 2030 on Sustainable
Development and Cotonou Agreement, research and innovation cooperation in the field of
renewable energy generation technologies between EU and Africa needs to be strengthened
and further developed. Coordination of the existing bilateral activities between European and
African countries is advisable. The challenge is bringing together the national funding
agencies of EU member states and African states interested in developing joint research
activities between the two continents to create synergies and to push forward common
research and innovation cooperation in the field of renewable energy generations.
Scope: The proposal will be the preparatory step towards the action to be supported under
topic LC-SC3-JA-5-2020. The consortium has to bring together the core relevant European
funding agencies and African partners already involved research and innovation cooperation
actions.
The fields of activities to be programmed will cover the research and development of new or
the adaptation of renewable energy generation technologies to the African environmental,
social and economic conditions, of providing affordable access to renewable energy and of
improving the innovation cycles.
The objectives will be the development a common strategic joint research and innovation
programme on renewable energy technology and to establish its organisational principles that
could lead to a Joint Programme. The common strategic joint programme needs to create
synergies with existing African-European programmes such as the Africa-EU Energy
Partnership, the EU Energy Initiative, the Africa Renewable Energy Initiative and the EU-
Africa Research and Innovation Partnership.
The estimated duration to achieve these objectives is approximately 12 months.
Expected Impact: The expected impact will be firstly the achievement of the joint
commitments necessary to propose and to implement a Joint Programme, secondly the
identifications through its strategic joint programme of the essential research and innovation
activities needed to reinforce and to boost European and African research cooperation.

Annexes.
LC-SC3-JA-5-2020: Joint Programming with EU and African partners for a R&I

actions in the area of renewable energy
Cross-cutting issues
LC-SC3-CC-1-2018-2019-2020: Social Sciences and Humanities (SSH) aspects of the

Clean-Energy Transition124
Specific Challenge: The clean-energy transition doesn't just pose technological and scientific
challenges; it also requires a better understanding of cross-cutting issues related to
socioeconomic, gender, sociocultural, and socio-political issues. Addressing these issues will
help to devise more effective ways of involving citizens and to better understand energy-
related views and attitudes, ultimately leading to greater social acceptability as well as more
durable governance arrangements and socioeconomic benefits.
Scope: In 2018, proposals should be submitted under the theme "Social innovation in the
energy sector" and in 2019 under the theme "Challenges facing carbon-intensive regions".
They should address one or several of the questions listed under the respective sub-topics
below. All proposals should adopt a comparative perspective, with case studies or data from
at least three European Union Member States or Associated Countries.
2018:
Social innovation 125 in the energy sector: The energy transition has given rise to various
forms of social innovation, such as the emergence of energy cooperatives or that of energy
"prosumers" consuming but also producing energy. Urban areas have emerged as major hubs
for these trends, given the close proximity between citizens, businesses and institutions,
facilitating linkages between sectors and the emergence of new business and service models,
as well as associated governance arrangements. These issues need to be studied in more
detail, with a particular focus on the following questions:
 What characterizes successful examples of social innovation in the energy sector?
 What enabling conditions facilitate social innovation in the energy sector and how can it
be encouraged? What factors work against it?
124
125
Social innovations are defined "as new ideas (products, services and models) that simultaneously meet social
needs (more effectively than alternatives) and create new social relationships or collaborations. In other words
they are innovations that are not only good for society but also enhance society’s capacity to act. See,
Empowering people, driving change, Bureau of European Advisers (BEPA), Brussels (2011), p. 33.

 In what way does social innovation contribute to the preservation of livelihoods and the
development of new business and service models in the energy sector?
 In what way does social innovation contribute to making energy more secure,
sustainable and affordable? Does social innovation lead to greater competitiveness and if
so, how?
 Under what conditions does social innovation lead to greater acceptance of the transition
towards a low-carbon energy system?
2019:
Challenges facing carbon-intensive regions: The transition to a low-carbon energy system and
economy poses particular challenges for regions that are still heavily dependent on fossil-fuel-
based industries or the extraction of fossil fuels themselves ("coal and carbon-intensive
regions"). At the same time, this transition offers major opportunities for developing new
lines of business and for increasing the competitiveness of structurally weak regions.
Focusing on the past 5-10 years up to the present, particular attention should be focused on
the following issues:
 What are the principal socio-economic challenges facing coal and carbon-intensive
regions today and what effect have these had on livelihoods and the sustainability of
local and regional economies?
 What coping strategies have emerged in recent years? What are the principal differences
between regions that are coping well and those that are not?
 To what extent have coal and carbon-intensive regions experienced outward migration in
recent years and in what way has this affected their social and demographic
composition?
 What effect, if any, have these changes had on the rise of populism and of anti-
democratic attitudes in the regions concerned?
amounts.
Expected Impact: The proposed research will:
 provide a better understanding of socioeconomic, gender, sociocultural, and socio-

political factors and their interrelations with technological, regulatory, and investment-
related aspects, in support of the goals of the Energy Union and particularly its research
and innovation pillar;126
126
As expressed in the "Accelerating Clean Energy Innovation" Communication (COM [2016] 763)

 yield practical recommendations for using the potential of social innovation to further
the goals of the Energy Union, namely, to make Europe's energy system more secure,
sustainable, competitive, and affordable for Europe's citizens;
 yield practical recommendations for addressing the challenges of the clean-energy

transition for Europe's coal and carbon-intensive regions, including socioeconomic and
political ones.
Annexes.
LC-SC3-CC-2-2018: Modelling in support to the transition to a Low-Carbon Energy

System in Europe
Specific Challenge: The energy system in Europe will follow a transition to a low-carbon
future in accordance with the COP21 agreements and the European Union targets and
objectives set for 2020, 2030 and 2050. Energy models that are currently used to plan, support
and verify the energy policies at national and European level do not fully encompass and
integrate all the new challenges posed by this transition, such as decentralisation and
variability in electricity supply, the need for flexibility, short-and long-term market dynamics,
integration of the energy systems, the deployment of innovative technologies and the
interaction between increasing numbers of independently acting agents in liberalised markets.
In addition, energy models do not always capture the determinants, barriers (including
financing-related issues) and (macroeconomic) impacts of the necessary investments to secure
the low-carbon transition.
Civil society is looking for improved access to the assumptions, tools and results underlying
the assessment of policy options. Researchers are also looking for enhanced possibilities for
open collaborative research and the use of open data sources. An enhanced transparency of
modelling tools and a wider availability of data used and generated by the modelling exercises
would improve access and understanding of the challenges ahead. In addition, Europe needs
to continuously promote networks and platforms for dialogues on energy modelling across
relevant actors and institutions in order to progress the scientific knowledge in the field and to
reinforce the interaction between researchers and policy makers.
The challenge is therefore to develop new knowledge on energy system modelling to set up an
open space for researchers at national and European levels to collaboratively innovate and
progress in using modelling tools to understand and predict the requirements of the transition
towards a low-carbon energy system. The aim is to support the development of effective and
efficient policy measures, to increase consistency and comparability of modelling practices
and their use in defining low-carbon transition pathways at regional, national and European
level.

Scope: Proposals must target the development of a suite of modelling tools and scenario
building exercises that will contribute to a better understanding of the issues below. Proposals
will address all of the following issues:
1. A better representation of recent and future aspects of the European energy system in
transition. For power generation, it includes aspects such as decentralisation, variability,
the need for flexibility, and real market functioning. For demand, it includes the
behaviour of individuals and communities of actors. It should also help address issues
such as the integration of energy sectors (electricity, heating/cooling and gas).
2. Greater transparency and access to assumptions, data, model outputs and to tools used in
modelling exercises. A collaborative environment for research on modelling, scenario
and pathways development including ex-post validation and inter-comparison exercises
should be proposed. Interaction with energy transition modelling activities in member
states and with energy and climate policy makers.
3. A better representation of the investment determinants, barriers (energy market and

regulatory failures) and impacts of actors: individuals, communities, private and public
actors and cover the deployment of innovative technologies. This should help represent
policy measures that address barriers and market failures. The exploration of energy and
macroeconomic relationships, including via the investment channels, would also create a
clearer understanding of macro-economic impacts of the low-carbon transition.
The organisation of an annual conference on energy modelling, bringing together the relevant
experts and policy-makers, would be an important asset.
and 5 million would allow this specific challenge to be addressed appropriately. Nonetheless
Expected Impact: The supported projects are expected to contribute to:
a. A better adequacy of energy system modelling approaches to model the transition to a

low-carbon energy system and to encompass the new challenges posed by the energy
transition driven by the Energy Union with its targets and objectives for 2020, 2030 and
2050;
b. Improve the understanding of energy systems by enhancing the transparency of

modelling engines and practices and making data and knowledge more widely available.
Increase the sharing of modelling infrastructures and databases:
c. Increase openness to collaborative research on energy system modelling as well as the

provision of more complete information on policy options and their assessment to civil
society and decision-makers.

d. Better representation of the determinants, barriers and impacts of investments by actors:

individuals, communities, and private and public actors. Allow better design and
representation of policy measures that address barriers and market failures;
e. Promote a coherence of modelling practices at regional, national and European levels,

allowing an assessment of cross-border effects and the comparison and integration of
individual approaches;
f. Provide a clearer understanding of the macro-economic impacts of the low-carbon

transition.
Annexes.
LC-SC3-CC-3-2019: Support for the opening of low-carbon energy research databases

in Europe127
Specific Challenge: Recent advances in the collection and exploitation of large data sets open
the possibility for major industrial and social innovations. The European Open Science Cloud
initiative aims to maximise the incentives for sharing data and to increase the capacity to
exploit them, to ensure that data can be used as widely as possible.
Increasing aspects of research in the transition to a low-carbon energy system in Europe rely
on the collection, analysis and processing of large data sets. Insights, information and
knowledge are increasingly extracted from data sets in individual sectors and in the
combination of data from different sectors.
The challenge is to promote the opening of research databases for low-carbon energy in
Europe, and to support a European-level approach to defining the development of future
research data bases; this action focuses on the area of low-carbon energy. As the energy
transition combines different scientific disciplines, particular attention has to be paid to agreed
metadata in order to allow for the joint exploitation of data from these disciplines.
Scope: Proposals will develop together with energy research communities several of the items
below:
 Development and use of data management practices that follow findable, accessible,
interoperable, re-usable (FAIR) principles, and to the validation of data quality
measures;
 Coordination of existing data repositories and databases, including those from SETIS
and from the IEA;
127

 Access to tools to manage energy data with FAIR principles; promotion of open source
access of such tools;
 Access to analytics to exploit energy data; promotion of open source access of such
tools;
 Capacity building of data experts for the domain of low-carbon energy research;
 New research topics based on the analysis of large data sets in the energy domain;
 Trans-disciplinary research combining data from different domains and at different

scales;
 Development of partnerships with industry to promote the opening of large datasets of

interest to foster research into future technologies and services.
A broad coverage of the issues mentioned above is encouraged.
Recommendations that will be produced by the ongoing study on "Opportunities and barriers
for opening of research databases in low-carbon energy research" should be taken into
account128.
Proposals should also follow developments of the European Open Science Cloud initiative,
and plan to cooperate with and complement this activity.
EUR 0.5 and 1 million would allow this specific challenge to be addressed appropriately.
amounts.
Expected Impact:
 Increasing/extending/widening the use of low-carbon energy research databases,

particularly those from publicly financed R&I projects.
 Development of a critical mass of open research databases in Europe, and of researchers

equipped with the know-how for the deployment, maintenance and exploitation of these.
 Easy and open access to these databases and to tools for their elaboration and
exploitation, leading to increased efficiency of research investments.
 Strengthening of data-intensive research on low-carbon energy in Europe;
 Strengthening the development of industrial applications of data-intensive processes.
128
To be published in the first half of 2018 on https://bookshop.europa.eu/en/home/

Annexes.
LC-SC3-CC-4-2018: Support to sectorial fora129
Specific Challenge: The transition to a low-carbon energy system poses a unique set of policy,
technological and scientific challenges, changes the fundamental nature of the interrelations
between all actors in our societies (from energy incumbents to regulators and citizens), and
requires the engagement of all stakeholders. Not only is there a need to find novel approaches
to the development and application of technological or social processes as they relate to the
energy transition, but also to a better understanding of how these changes impact people’s
behaviour, pervasive values, cultures of practice and modes of communication. It also entails
the need to engage all stakeholders, foster cooperation between them, align their actions to the
achievement of commonly agreed goals.
Scope: Proposals will have to support sector-specific stakeholder fora along the following
lines:
1. Support the coordination of stakeholders' activities in the context of the SET-Plan

European Technology Innovation Platforms (especially towards the progress of the
strategic R&I Implementation Plans identified in the different technological areas in the
context of the SET-Plan Key Actions), in particular in the area of
a. PV;
b. Ocean energy;
c. Wind energy;
d. Renewable Fuels and Bioenergy;
e. Renewable Heating and Cooling (RHC); and
f. Zero emission fossil fuel power plants and energy intensive industry.
2. All relevant stakeholders of the hydropower sector will be brought together in a forum
including workshops and online discussion groups in order to identify research and
innovation needs and priorities, to share knowledge at the European level between basic
science, the research and industrial value chain, civil society and European and national
authorities, to support the discussion with up-to-date information. The forum will
produce a synthesis of expected research developments and research needs for the
coming decades in a technology roadmap and research and innovation agenda in the
hydropower sector, targeting an energy system with high flexibility and renewable share.
129

3. Building on the platform for energy-related SSH research that was set up during the
pilot phase, the dialogue among different SSH stakeholders - as well as with other
energy-research communities, fostering interdisciplinarity as well as knowledge and
information sharing – should be continued and enhanced. This includes promoting the
generation of novel, evidence-based research designed to inform and influence relevant
policy processes, particularly in the context of the Energy Union and the transition to a
low-carbon energy system. The platform will be sought after by European policymakers
as a source of specific expertise and advice on how best to integrate SSH aspects in
energy-related policymaking.
4. Taking into account that private investment is the most important contributor to the
Energy Union’s Research and Innovation priorities, this action will support the
coordination of the industrial participation in the SET Plan. It will in particular focus on
the execution of the implementation plans of the SET Plan nine non-nuclear priority
actions to reach the strategic targets agreed by the SET Plan Steering Group to enhance
European competitiveness in clean energy innovation. In order to reach this goal, the
action will promote collaboration and the development of cross thematic synergies
among actors who are interested in bringing new clean energy innovations to the market,
in particular from the European industry-driven associations and initiatives such as the
European Technology and Innovation platforms (ETIPs), European Joint Technology
Initiatives or other relevant public-private partnerships, and importantly the industrial
actors identified in the 13 non–nuclear SET plan implementation plans. A key task of
this action will be to help further define adequate financial strategies to mobilise
investments from different sources to fulfil the implementation plans. In line with the
SET Plan principles, financial resources will come mainly from industry and national
public funds. The use of complementary European funds will be promoted whenever
relevant (e.g. from ESIF and the risk sharing facility InnovFin EDP recently significantly
enlarged in terms of funding and scope to channel undisbursed funds from NER300 and
to prepare the future Innovation Fund). The focus of the action will be European,
establishing links with the corresponding sectorial fora in Europe and with other
international initiatives in the clean energy domain, such as Mission Innovation.
The Commission considers that proposals requesting a contribution from the EU of up to

amounts.
Expected Impact: Coordinated stakeholders' activities in the different sectors, providing

specific and extensive advice to EU policymakers on energy-related research policy-making,
continuing to foster social innovation and social dialogue in the energy field at European
level, contributing towards the progress of the strategic research and innovation
Implementation Plans identified in the context of the SET-Plan.

Annexes.
LC-SC3-CC-5-2018: Research, innovation and educational capacities for energy

transition
Specific Challenge: The energy sector is evolving rapidly creating new job opportunities
while requiring new skills and expertise to be developed. The challenges are significant. Over
the coming years, the growing low-carbon energy sector requires many employees to be
educated, trained or re-skilled. At the same time, energy innovation creates a massive need for
new talents, able to cope and conduct the energy transition with a systemic approach.
Therefore curricula and programmes, including the modules organised in operating
environment, need to be upgraded or new ones developed.
Due to their interdisciplinary work in research, innovation, education and training,

universities are core stakeholders in Europe's energy transition towards a low carbon society.
They also are important change agents that will be instrumental in responding to the above
mentioned challenges.
In order that European universities contribute fully to the objectives of the Energy Union and
to the SET Plan 130 they need to cooperate further with innovative businesses and offer
appropriate curricula/programmes 131 . To do so silos need to be broken between energy
technologies and interdisciplinarity that is conducive to addressing the challenges of the
whole energy system needs to be fostered. The appropriate skills for tackling the energy
transition, going beyond separate technologies and incorporating social,
entrepreneurial/managerial and market aspects of the energy system, need to be developed.
In addition, solutions need to be clearly targeted, oriented to meet skills needs quickly, easily
replicable in other domains and scalable to other European universities/institutions. For this
purpose it is crucial to have active networks in place among universities and between
universities and business.
Scope: Proposals will cover one or more of the following fields:
 Renewable energy,
 Energy storage,
 Smart and flexible energy systems,
 Carbon capture, utilisation and storage (CCUS).
Proposals will combine the relevant scientific and technological elements of these fields with
relevant social sciences and humanities in a way that is balanced and provides an
130
https://ec.europa.eu/energy/en/topics/technology-and-innovation/strategic-energy-technology-plan
131
The SET Plan Education and Training Roadmap can serve as a general reference document
https://setis.ec.europa.eu/setis-output/education-training-roadmap

interdisciplinary approach (e.g. involving SSH scientists as partners; including SSH scientific
subjects as parts of interdisciplinarity, developing special SSH curricula or similar).
Proposals will deliver all the following, addressing the specific needs of the SET Plan
objectives and its Implementation Plans:
 Efficient and effective cooperation networks both among European universities and
between European universities and business;
 Challenge and case-based modules that are linked to European university programmes
(at least three per programme) to teach students about operational problems combining
the social, technological and industrial dimensions;
 At least three innovative (such as using digitisation) and short (3-4 months) university
tools/programmes in the chosen field or fields, which are replicable and scalable in
Europe, and respond rapidly to urgent European industry needs and the rapidly evolving
European energy landscape;
 Opportunities for student mobility between the academia and industry.
The networks will also address needs for training the trainers. However, except for piloting,
the actual teaching or training the trainer activities remain outside the scope of this topic.
Modules and programmes will only be developed in English.
amounts.
Expected Impact: The funded proposals are expected to lead to a generation of researchers
and engineers who are equipped to develop, improve and deploy new energy technologies,
thereby contributing to meeting the challenges of the energy transition.
At the same time, the capacities of the European universities in energy research, innovation
and education will be enhanced, as will their ability to engage with industry, cities, regions
and other key societal actors. This will increase European universities' abilities to facilitate the
swift deployment of technological and non-technological innovations in the energy sector.
Annexes.
LC-SC3-CC-6-2018: Transition in coal intensive regions
Specific Challenge: The implementation of the EU Energy Union transition towards a low-
carbon economy poses significant technological, economic and social challenges, in particular
for coal-intensive regions that have to prepare for the reduction or phasing-out of coal

production, both due to market-driven trends and environmental policies. These regions need
an effective roadmap to make the necessary transition to a more diversified economic base
and a more sustainable energy system, while safeguarding the social cohesion for
communities and regions dependent on coal production.
Smart Specialisation strategies, which are also a precondition for benefiting from European
Structural and Investment Funds, are expected to help organise the structural changes. The
involvement of the private sector, researchers and local governments in the process of
'entrepreneurial discovery' is a key challenge in itself. Developing joint strategies, built on
complementarities and respective strengths, can be valuable for better realising the individual
and combined potential of coal-intensive regions.
Scope: The objective is to support European coal-intensive regions to design research and
innovation strategies to facilitate their transition towards a sustainable energy system. The
proposed action will assist policy makers to develop, implement and review their strategies by
providing information, developing methodologies, expertise and advice. Main deliverables are
a set of blueprints and tools for Member States, Associated Countries and regions. Special
consideration will be given to the Implementation Plans jointly developed by European
countries, as part of the EU's Strategic Energy Technology Plan (SET Plan).
Specific issues to be addressed include:
 Assist regional actors in developing Research and Innovation strategies for smart
specialisation, including the development of public R&I capacities, consistent with the
SET Plan;
 Investigate relevant social challenges including the re-skilling needs of the workforce;
 Identification and exchange of best practices, including industrial roadmaps from coal
towards new technologies and transformation strategies for coal based combined heat
and power production to low carbon electricity and district heating generation;
 Guidance to regional actors for the access to available European funds and programmes,
such as; (a combination of) the European Fund for Strategic Investments (EFSI),
Cohesion Policy funds and Horizon 2020, and leveraging additional national public and
private co-financing.
The project should develop synergies and complementarities to the European Commission's
Smart Specialisation Platform on Energy (S3PEnergy)132.
amounts.
132
http://s3platform.jrc.ec.europa.eu/s3p-energy

Expected Impact: The proposed action should lead to new and deepened cooperation in R&I
between coal intensive regions that will facilitate their transition to a more sustainable energy
system. This cooperation should in the short to medium term contribute to reach the targets
set in the SET Plan and stimulate investment in the low-carbon energy sector, with the long
term aim to boost innovation-driven growth and industrial competitiveness, create
opportunities for employment, meet the COP21 targets and safeguard environmental
protection.
Annexes.
Conditions for the Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT

FUTURE: SECURE, CLEAN AND EFFICIENT ENERGY
Opening date(s), deadline(s), indicative budget(s):133
Topics (Type of Action) Budgets (EUR million) Deadlines
2018 2019 2020
Opening: 31 Oct 2017
LC-SC3-RES-11-2018 (RIA) 30.00 31 Jan 2018 (First Stage)
LC-SC3-RES-4-2018 (RIA) 27.50 23 Aug 2018 (Second

Stage)
LC-SC3-JA-4-2018 (CSA) 1.00 31 Jan 2018
LC-SC3-RES-12-2018 (IA) 30.00 13 Feb 2018
LC-SC3-RES-13-2018 (IA) 45.00
LC-SC3-RES-21-2018 (RIA) 25.00
LC-SC3-RES-28-2018-2019-2020 15.00
(CSA)
133
The Director-General responsible for the call may decide to open the call up to one month prior to or after the
envisaged date(s) of opening.
The Director-General responsible may delay the deadline(s) by up to two months.
All deadlines are at 17.00.00 Brussels local time.
The deadline(s) in 2020 are indicative and subject to separate financing decisions for 2020.
The budget amounts for the 2019 budget are subject to the availability of the appropriations provided for in the
draft budget for 2019 after the adoption of the budget 2019 by the budgetary authority or, if the budget is not
adopted, as provided for in the system of provisional twelfths.
The budget amounts for the 2020 budget are indicative and will be subject to separate financing decisions to
cover the amounts to be allocated for 2020.

LC-SC3-RES-5-2018 (IA) 10.00
LC-SC3-RES-6-2018 (IA) 30.00
Opening: 05 Dec 2017
LC-SC3-ES-3-2018-2020 (IA) 26.30 05 Apr 2018
LC-SC3-ES-4-2018-2020 (IA) 19.00
LC-SC3-ES-5-2018-2020 (IA) 30.00
LC-SC3-ES-7-2018 (CSA) 3.00
LC-SC3-RES-22-2018 (IA) 20.00
LC-SC3-SCC-1-2018-2019-2020 43.00
134
(IA)
LC-SC3-CC-4-2018 (CSA) 8.50 19 Apr 2018
LC-SC3-RES-2-2018 (RIA) 12.00
Opening: 25 Jan 2018
LC-SC3-EC-1-2018-2019-2020 5.00 04 Sep 2018

(CSA)
LC-SC3-EC-2-2018-2019-2020 5.00
(CSA)
LC-SC3-EE-1-2018-2019-2020 (IA) 9.00
LC-SC3-EE-10-2018-2019-2020 6.00
(CSA)
LC-SC3-EE-11-2018-2019-2020 7.00
(CSA)
LC-SC3-EE-13-2018-2019-2020 4.00
(CSA)
LC-SC3-EE-14-2018-2019-2020 4.00
(RIA)
LC-SC3-EE-15-2018 (CSA) 5.00
LC-SC3-EE-16-2018-2019-2020 8.00
(CSA)
134
of which EUR 3.00 million from the 'Smart, green and integrated transport' WP part.

LC-SC3-EE-2-2018-2019 (CSA) 7.00
LC-SC3-EE-5-2018-2019-2020 5.00
(CSA)
LC-SC3-EE-6-2018-2019-2020 (IA) 9.00
LC-SC3-EE-8-2018-2019 (CSA) 10.00
LC-SC3-EE-9-2018-2019 (CSA) 6.00
Opening: 15 May 2018
CE-SC3-NZE-2-2018 (RIA) 12.00 06 Sep 2018
LC-SC3-CC-1-2018-2019-2020 10.00
(RIA)
LC-SC3-CC-2-2018 (RIA) 5.00
LC-SC3-CC-5-2018 (CSA) 4.00
LC-SC3-CC-6-2018 (CSA) 2.00
LC-SC3-NZE-1-2018 (RIA) 20.00
LC-SC3-NZE-3-2018 (CSA) 3.00
LC-SC3-JA-1-2018 (ERA-NET- 10.00 11 Sep 2018

Cofund)
LC-SC3-JA-2-2018-2019 (CSA) 6.00
Opening: 01 Aug 2018
LC-SC3-RES-1-2019-2020 (RIA) 20.00 16 Oct 2018 (First Stage)
LC-SC3-RES-14-2019 (RIA) 20.00 25 Apr 2019 (Second

Stage)
LC-SC3-EE-17-2019 (CSA) 16.00 05 Feb 2019
Opening: 05 Sep 2018
LC-SC3-RES-15-2019 (IA) 25.00 11 Dec 2018
LC-SC3-RES-17-2019 (IA) 40.00
LC-SC3-RES-24-2019 (IA) 20.00
LC-SC3-RES-28-2018-2019-2020 15.00
(CSA)

LC-SC3-RES-30-2019 (IA) 10.00
LC-SC3-RES-8-2019 (IA) 15.00
LC-SC3-ES-1-2019 (IA) 37.30 05 Feb 2019
LC-SC3-ES-2-2019 (IA) 25.00
LC-SC3-ES-6-2019 (RIA) 28.35
LC-SC3-ES-8-2019 (CSA) 10.00
LC-SC3-SCC-1-2018-2019-2020 83.00
135
(IA)
Opening: 14 Nov 2018
LC-SC3-CC-3-2019 (CSA) 2.00 27 Aug 2019
LC-SC3-ES-9-2019 (ERA-NET- 10.00

Cofund)
LC-SC3-JA-2-2018-2019 (CSA) 1.00
LC-SC3-JA-3-2019 (PCP) 20.00
Opening: 12 Mar 2019
LC-SC3-EC-1-2018-2019-2020 7.50 03 Sep 2019

(CSA)
LC-SC3-EC-2-2018-2019-2020 7.50
(CSA)
LC-SC3-EE-1-2018-2019-2020 (IA) 12.00
LC-SC3-EE-10-2018-2019-2020 6.00
(CSA)
LC-SC3-EE-11-2018-2019-2020 6.00
(CSA)
LC-SC3-EE-13-2018-2019-2020 8.00
(IA)
LC-SC3-EE-14-2018-2019-2020 4.00
(RIA)
LC-SC3-EE-16-2018-2019-2020 10.00
135

(CSA)
LC-SC3-EE-18-2019 (CSA) 1.00
LC-SC3-EE-2-2018-2019 (CSA) 10.00
LC-SC3-EE-3-2019-2020 (CSA) 6.00
LC-SC3-EE-4-2019-2020 (IA) 10.00
LC-SC3-EE-5-2018-2019-2020 (IA) 10.00
LC-SC3-EE-6-2018-2019-2020 5.00
(CSA)
LC-SC3-EE-8-2018-2019 (CSA) 5.00
LC-SC3-EE-9-2018-2019 (CSA) 4.00
Opening: 07 May 2019
LC-SC3-CC-1-2018-2019-2020 10.00 27 Aug 2019

(RIA)
LC-SC3-NZE-4-2019 (IA) 20.00
LC-SC3-NZE-5-2019-2020 (IA) 33.00
LC-SC3-RES-16-2019 (RIA) 15.00
LC-SC3-RES-23-2019 (RIA) 20.00
LC-SC3-RES-29-2019 (RIA) 6.00
LC-SC3-RES-7-2019 (RIA) 10.00
Opening: To be defined
Focus area topic(s) for 2020 To be defined
Focus area topic(s) for 2020 321.92 To be defined
Focus area topic(s) for 2020 320.89 To be defined
Focus area topic(s) for 2020 To be defined

Overall indicative budget 537.30 623.65 642.81
Indicative timetable for evaluation and grant agreement signature:
For single stage procedure:
 Information on the outcome of the evaluation: Maximum 5 months from the final date
for submission; and
 Indicative date for the signing of grant agreements: Maximum 8 months from the final
date for submission.
For two stage procedure:
 Information on the outcome of the evaluation: Maximum 3 months from the final date
for submission for the first stage and maximum 5 months from the final date for
submission for the second stage; and
 Indicative date for the signing of grant agreements: Maximum 8 months from the final
date for submission of the second stage.
Eligibility and admissibility conditions: The conditions are described in General Annexes B
and C of the work programme. The following exceptions apply:
LC-SC3-EC-1-2018- Taking into account the nature of the activity and with the
2019-2020, LC-SC3- objective to maximize the European Added Value and European
EC-2-2018-2019-2020, market uptake through transnational collaboration 136 , the
LC-SC3-EE-10-2018- following additional eligibility criteria apply for Coordination
2019-2020, LC-SC3- and Support Actions (CSA):
EE-13-2018-2019-
1. at least three legal entities shall participate in an action;
2020, LC-SC3-EE-15-
2018, LC-SC3-EE-16- 2. each of the three legal entities shall be established in a
2018-2019-2020, LC- different Member State or Associated Country
SC3-EE-3-2019-2020,
all three legal entities shall be independent of each other within
LC-SC3-EE-5-2018-
the meaning of Article 8 of the Rules for Participation.
2019-2020, LC-SC3-
EE-6-2018-2019-2020,
LC-SC3-EE-8-2018-
2019, LC-SC3-EE-9-
2018-2019
LC-SC3-SCC-1-2018- Consortia shall be composed of 2 lighthouse cities and at least 5

2019-2020 follower cities.
136
Transition towards Secure, Clean and Efficient Energy and the Energy Union project are cross-national policy
initiatives and priorities aiming at trans-national solutions.

By the call deadline, all lighthouse cities must have a

validated137: i) Sustainable Energy Action Plans (SEAP)138 or ii)
Sustainable Energy (and Climate) Action Plans (SECAP) 139 or
iii) a similar, at least equally ambitious, plan.
A city can be funded as a lighthouse city only once under

Horizon 2020.
LC-SC3-ES-5-2018- Consortia shall involve:

2020
 at least 2 energy suppliers and at least 2 ESCOs or
independent aggregators,
 Transmission System Operators (TSO) from at least 3

different Member States (this doesn't exclude participation
of additional TSOs from non-Member States),
 5 Distribution System Operators (DSO) from several

Member States, with at least 2 of those DSOs operating in
the area covered by the transmission system of any of the
participating TSOs.
LC-SC3-ES-4-2018- Proposals must include:

2020
 at least one demonstration on one island;
 at least 2 other follower islands with similar issues; these

follower islands will develop plans to adapt similar
solutions to their island in a cost-efficient way.
LC-SC3-ES-3-2018- In case of international cooperation with India, participants in

2020 the EU actions must explain in their proposal what are the
mutual benefits and added value of the cooperation and conclude
a Coordination Agreement with the participants from India with
sizeable efforts on both parts. A final draft of this agreement has
to be provided with the proposal.
LC-SC3-ES-1-2019 In case of sub-topic 2) International cooperation with Canada,

participants in the Horizon 2020 proposal will have to conclude,
if successful, a Coordination Agreement with the project
supported by Canadian funding authorities. A final draft of this
agreement must be provided with the proposal. A guidance
document on how to draw up such coordination agreement is
137
Validated by DG JRC. See also FAQ for more detail.
138
http://www.covenantofmayors.eu/actions/sustainable-energy-action-plans_en.html
139
http://www.covenantofmayors.eu/0-4.html

provided with the topic documentation.
LC-SC3-ES-6-2019, Due to the specific challenges associated with this topic (in case
LC-SC3-RES-29-2019, of topic LC-SC3-ES-6-2019 this refers only to sub-topic 4) and
LC-SC3-RES-30-2019 the international focus of the Mission Innovation initiative, in
addition to the minimum number of participants set out in the
General Annexes, proposals shall include at least one participant
from a non-EU/Associated country member of Mission
Innovation (i.e. Australia, Brazil, Canada, Chile, People’s
Republic of China, India, Indonesia, Japan, Mexico, Republic of
Korea, Saudi Arabia, United Arab Emirates, United States).
Standard rules on eligibility for EU funding apply.
LC-SC3-EE-18-2019 Due to the specific challenges associated with this topic,

proposals must involve at least one legal entity established in a
Member State or Associated Country and one legal entity
established in one of the following African countries: Algeria,
Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon,
Cape Verde, Central African Republic, Chad, Comoros, Congo
(Democratic People’s Republic), Congo (Republic), Côte
d’Ivoire, Djibouti, Egypt, Eritrea, Ethiopia, Gabon, Gambia,
Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya,
Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco,
Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and
Principe, Senegal, Seychelles, Sierra Leone, Somalia, South
Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo,
Uganda, Zambia, Zimbabwe.
Exceptional page limits to proposals/applications:
LC-SC3-SCC-1-2018- The page limit for a full proposal is 150 pages

2019-2020
Evaluation criteria, scoring and threshold: The criteria, scoring and threshold are described in
General Annex H of the work programme. The following exceptions apply:
LC-SC3-EE-1-2018- In line with the other topics for Innovation Actions contributing
2019-2020, LC-SC3- to the PPP on Energy-efficient Buildings and SPIRE, the
EE-6-2018-2019-2020 threshold for the criteria Excellence and Impact will be 4. The
overall threshold, applying to the sum of the three individual
scores, will be 12.
Evaluation Procedure: The procedure for setting a priority order for proposals with the same
score is given in General Annex H of the work programme. The following exceptions apply:

LC-SC3-RES-12-2018, In order to ensure that a balanced portfolio of activities covering

LC-SC3-RES-13-2018, different renewable energy technology areas will be supported,
LC-SC3-RES-16-2019, the available budget will be firstly allocated to the proposal with
LC-SC3-RES-17-2019 the highest score, passing all thresholds, in each of the sub-
topics. In a second round, proposals will be selected for funding
regardless of the sub-topic and only according to the single
ranking list of this topic.
LC-SC3-ES-6-2019 In order to ensure the coverage of all sub-topics, proposals above

all thresholds will be ranked in each of the 4 areas and the first
ranked proposals in each sub-topic will be selected until the
available budget is exhausted (first, all proposals ranked nb 1,
then nb 2, etc.), with the exception of sub-topic 4 for which only
the highest-ranked eligible proposal will be selected; in case of
insufficient budget to select all projects of the same rank to
cover the 3 sub-topics, the best scores will prevail; in case of
equal scores, standard rules do apply.
LC-SC3-ES-3-2018- The proposal involving International Cooperation with India

2020 with the highest score, passing all thresholds, will be selected
first. In a second round, proposals will be selected for funding
according to the single ranking list, regardless of whether they
include partners from India or not.
LC-SC3-ES-1-2019 At least one proposal per sub-topic will be funded, provided it

passed all thresholds.
The full evaluation procedure is described in the relevant guide published on the Participant
Portal.
Grant Conditions:
LC-SC3-ES-5-2018- For grants awarded under this topic beneficiaries may provide
2020 support to third parties as described in part K of the General
Annexes of the Work Programme. The support to third parties
can only be provided in the form of grants. The respective
options of Article 15.1 and Article 15.3 of the Model Grant
Agreement will be applied. Each consortium will define the
selection process of the third parties for which financial support
will be granted (with a maximum of EUR 60.000 per party140).
Up to 2,5% of the EU funding requested by the proposal may be
140
In line with Article 23 (7) of the Rules for Participation the amounts referred to in Article 137 of the Financial
Regulation may be exceeded, and if this is the case proposals should explain why this is necessary to achieve the
objectives of the action.

allocated to the purpose of financial support to third parties.
LC-SC3-EE-17-2019, For grants awarded under this topic beneficiaries should provide
LC-SC3-ES-8-2019 support to third parties as described in part K of the General
Annexes of the Work Programme. The support to third parties
can only be provided in the form of lump sum grants. The
respective options of Article 15.1 and Article 15.3 of the Model
Grant Agreement will be applied.
LC-SC3-JA-3-2019 In line with the nature of the instrument and the need to leverage
national funding, the funding rate for grants awarded under this
topic and type of action is 50% of the eligible costs.
LC-SC3-ES-1-2019 For sub-topic 2), the respective options of Article 2, Article 41.5
and Article 50.3.1 (i) (j) of the Model Grant Agreement will be
applied.
Consortium agreement:
CE-SC3-NZE-2-2018, Members of consortium are required to conclude a consortium

LC-SC3-CC-1-2018- agreement, in principle prior to the signature of the grant
2019-2020, LC-SC3- agreement.
CC-2-2018, LC-SC3-
CC-3-2019, LC-SC3-
CC-4-2018, LC-SC3-
CC-5-2018, LC-SC3-
CC-6-2018, LC-SC3-
EC-1-2018-2019-2020,
LC-SC3-EC-2-2018-
2019-2020, LC-SC3-
EE-1-2018-2019-2020,
LC-SC3-EE-10-2018-
2019-2020, LC-SC3-
EE-11-2018-2019-
2020, LC-SC3-EE-13-
2018-2019-2020, LC-
SC3-EE-14-2018-
2019-2020, LC-SC3-
EE-15-2018, LC-SC3-
EE-16-2018-2019-
2020, LC-SC3-EE-17-
2019, LC-SC3-EE-18-
2019, LC-SC3-EE-2-
2018-2019, LC-SC3-

EE-3-2019-2020, LC-
SC3-EE-4-2019-2020,
LC-SC3-EE-5-2018-
2019-2020, LC-SC3-
EE-6-2018-2019-2020,
LC-SC3-EE-8-2018-
2019, LC-SC3-EE-9-
2018-2019, LC-SC3-
ES-1-2019, LC-SC3-
ES-2-2019, LC-SC3-
ES-3-2018-2020, LC-
SC3-ES-4-2018-2020,
LC-SC3-ES-5-2018-
2020, LC-SC3-ES-6-
2019, LC-SC3-ES-7-
2018, LC-SC3-ES-8-
2019, LC-SC3-ES-9-
2019, LC-SC3-JA-1-
2018, LC-SC3-JA-2-
2018-2019, LC-SC3-
JA-3-2019, LC-SC3-
JA-4-2018, LC-SC3-
NZE-1-2018, LC-SC3-
NZE-3-2018, LC-SC3-
NZE-4-2019, LC-SC3-
NZE-5-2019-2020,
LC-SC3-RES-1-2019-
2020, LC-SC3-RES-
11-2018, LC-SC3-
RES-12-2018, LC-
SC3-RES-13-2018,
LC-SC3-RES-14-2019,
LC-SC3-RES-15-2019,
LC-SC3-RES-16-2019,
LC-SC3-RES-17-2019,
LC-SC3-RES-2-2018,
LC-SC3-RES-21-2018,
LC-SC3-RES-22-2018,
LC-SC3-RES-23-2019,
LC-SC3-RES-24-2019,
LC-SC3-RES-28-
2018-2019-2020, LC-
SC3-RES-29-2019,

LC-SC3-RES-30-2019,
LC-SC3-RES-4-2018,
LC-SC3-RES-5-2018,
LC-SC3-RES-6-2018,
LC-SC3-RES-7-2019,
LC-SC3-RES-8-2019,
LC-SC3-SCC-1-2018-
2019-2020

NEXT-GENERATION BATTERIES
The Energy Challenge contributes to the call "Building a low-carbon, climate resilient future:
Next-generation Batteries" (call identifier H2020-LC-BAT-2019-2020), in particular as
regards the topics:
 LC-BAT-2-2019: Strengthening EU materials technologies for non-automotive battery

storage
 LC-BAT-3-2019: Modelling and simulation for Redox Flow Battery development
 LC-BAT-4-2019: Advanced Redox Flow Batteries for stationary energy storage
For 2020, the following topics are indicated:
 LC-BAT-8-2020: Next-generation batteries for stationary energy storage
 LC-BAT-9-2020: Hybridisation of battery systems for stationary energy storage

TRANSFORMING THE ENERGY SECTOR THROUGH

DIGITISATION
At a time when the energy landscape is undergoing a fundamental change towards
decentralisation and decarbonisation, the introduction of new and smarter technologies will
make an important contribution. They will help integrate renewable energies from variable
and distributed resources in the energy systems and increase efficiency through better
monitoring and optimisation of assets.
These technologies can moreover provide an opportunity for the uptake of new energy
services and business models enabling consumers in the active participation in the energy
system and energy markets.
The Energy Challenge contributes to the Focus Area "Digitising and transforming European
industry and services" with the following specific topic which is implemented under the work
programme annex of the Information and Communication Technologies part (the contribution
of the Energy Challenge is matched by a contribution from the ICT part of the H2020
programme):
 DT-ICT-10-2018: Interoperable and smart homes and grids;
 DT-ICT–11-2019: Big data solutions for energy.
In addition, the Energy Challenge contributes to the Focus Area ''Boosting the effectiveness of
the Security Union" by contributing to a topic under the work programme Annex 'Secure
societies - Protecting freedom and security of Europe and its citizens':
 SU-DS-04-2018-2020: Cybersecurity in the Electrical Power and Energy System

(EPES): an armour against cyber and privacy attacks.

SME instrument & Fast-Track-to-Innovation
The respective calls for the EIC-SME instrument (H2020-EIC-SMEInst-2018-2020) and EIC-
Fast-Track-to-Innovation (H2020-EIC-FTI-2018-2020) are found under the Horizon 2020
Work Programme Part – Towards the next EU Framework Programme for Research and
Innovation: European Innovation Council (EIC) Pilot (part 17 of this work programme).

Other actions141
Horizon Prizes
1. Horizon prizes launched under the Work Programme 2016-2017 of the Horizon 2020
Societal Challenge "Clean Secure and efficient energy" (SC3)
On 4 July 2016 the following Horizon prizes were launched under the Work Programme
2016-2017 of the Horizon 2020 Societal Challenge "Clean Secure and efficient energy"
(SC3)142.
Prize Budget – Timeline of the Expected

Prize contest award
amount ceremony
Horizon prize for CO2 reuse EUR 1.5 5 July 2016 - 03 Q4 2019
million April 2019
Horizon Prize for a Combined heat and EUR 1 5 July 2016 - 03 Q4 2019
power installation in a hospital using 100% million April 2019
renewable energy sources
Horizon prize for Integrated Photovoltaic EUR 0.75 5 July 2016 - 26 Q2 2019
System in European Protected Historic Million September 2018
Urban districts
The prizes are expected to be awarded in 2019 and provision for the prize amounts must be
made accordingly.
Type of Action: Prize
Indicative budget: EUR 3.25 million from the 2019 budget
2. RESponsible Island - Prize for a renewable geographic energy island 143
The prize intends to highlight the potential of renewables for decentralized energy grids by
addressing energy needs for electricity, heating, cooling and transport. The title is inspired by
RES (short for Renewables) and "responsible" to highlight the citizen in the centre of the
141
142
As amended, C(2016)4614, announcing the prizes.
143
This activity directly aimed at supporting pilot activities is excluded from the delegation to INEA and will be

energy system. Within this context, the prize recognizes realised achievements in renewables
on geographic energy islands.
Geographic energy islands are ideal test labs for the deployment of innovative energy
technologies. The prize will reward integrated local RES production in a decentralized
electricity grid and the achievements in decarbonizing heating, cooling and transport. In this
context, renewable energy consumed on the island is also linked to the renewable energy
produced on the island, supporting its local value chains and self-engaging the local society as
a RESponsible prosumer.
The prize is in line with the objectives of the Political Declaration on Clean Energy on EU
Islands and the Smart Islands Initiative and will contribute to Mission Innovation Challenge 2
(“Off Grid Access to Electricity Innovation Challenge”)144.
The specific rules of the contest will be published by the European Commission at the
beginning of each yearly competition. The European Commission will directly launch and
manage the annual contest and annual award the prize based on the judgement of independent
experts145.
The indicative budget for the prize is EUR 1.7 million from the 2020 budget, intended as
award for two yearly competitions: EUR 0.5 million for the 1st place, EUR 0.25 million for
the 2nd place, EUR 0.1 million for the 3rd place.
Essential award criteria: After closure of the contest, the prize will be awarded to the three
best-ranked contestants, who in the opinion of the jury, best address the following cumulative
criteria for the respective whole geographic energy island146:
 The share of renewable energy produced by innovative energy technologies on the island
respective to the energy consumed on the island for electricity, heating and/or cooling
and transport;
 Environmental and socioeconomic sustainability and impact of the renewable energy

solution;
 Citizen and community involvement;
 Replicability of the solution.
Eligibility criteria: The island shall be located within the territory of an EU Member State
(including Overseas Countries and Territories linked to them) or an H2020 associated country
and the prize is open to any legal entity or group of legal entities representing the respective
island. Representation has to be proven through written representation agreement signed by
the respective authorities responsible for the whole island. Participating islands must have
144
http://mission-innovation.net/our-work/innovation-challenges/off-grid-access-challenge/
145
A pre-selection phase may be done by Commission services in case of numerous applications received.
146
Further clarification of these criteria might be published in the Rules of Contest

permanent residents and an energy demand in electricity, heating and/or cooling as well as
transport of at least 100 MWh/year overall.
Contestants that have already received an EU or Euratom prize cannot receive a second prize
for the same activities.
For the common Rules of Contest for Prizes please see General Annex F of the work
programme.
Expected results: The prize will highlight realised achievements/best practices in reaching the
potential of renewable energy for covering electricity, heating, cooling and transport needs in
off-grid societies, and in the introduction of innovative technologies to the market. It will be a
recognition of a responsible local society committed to expanding the share of renewables. It
will also provide excellent visibility for citizens participating in the promotion of innovative
renewable energy technologies.
The recognised solutions are expected to have high replicability also to other isolated energy
systems with islands characteristics worldwide in the context of Mission Innovation
Challenge 2147 by show-casing working business models.
Indicative timetable of contest(s):
Stages Date and time or indicative period
Opening of the contest 1st round: 1st quarter of 2019; 2nd round: 1st
quarter of 2020
Deadline for submission of application first round: 3rd quarter of 2019; 2nd round: 3rd
quarter of 2020
Award of the prize 1st round: 1st quarter of 2020; 2nd round: 1st
quarter of 2021
Type of Action: Recognition prize
147
http://mission-innovation.net/our-work/innovation-challenges/off-grid-access-challenge/

Grants to identified beneficiaries
1. Fostering transnational cooperation between National Contact Points (NCP) in the

area of Energy: follow-up project148
The action will facilitate transnational cooperation between Horizon 2020 NCPs in the area of
Energy with a view to identifying and sharing good practices and raising the general standard
of support to programme applicants, taking into account the diversity of actors that make up
the constituency of the energy sector. It will involve one consortium of NCPs focussing on
transnational cooperation on issues specific to the energy sector, within the context of
Horizon 2020 calls for proposals.
All activities must be tailored according to the nature of this sector.
The proposal should show that the activities put forward will deliver tangible benefits to
potential applicants. Activities should capitalise on relevant work of the previous NCP
network project in this sector (C-ENERGY 2020), and of the 'NCP Academy'
(www.ncpacademy.eu). Various mechanisms may be included, such as benchmarking, joint
workshops, enhanced cross-border brokerage events, and specific training linked to the energy
sector.
Where relevant, activities should make use of commonly available tools (e.g. for brokerage
and partner search, benchmarking tools, guidebooks, promotional tools etc).
To help close the innovation divide, a substantial component of the proposed activities must
be devoted to activities aimed at helping NCPs in those countries that have been participating
at low levels in the programme up to now. These activities should help these NCPs to rapidly
acquire the know-how on NCP operations accumulated in other countries including, for
example, training, mentoring, and twinning. They may also include awareness raising actions
aimed at increasing visibility of well-qualified potential applicant organisations in the above
mentioned countries.
The legal entities listed below are the host organisations of NCPs from EU Member States
and Associated Countries who have been officially appointed by the relevant national
authorities, and who have expressed a willingness to participate in this proposal. NCPs opting
not to be a beneficiary are nevertheless invited and encouraged to participate in the project
activities (e.g. workshops), and costs for such participation (e.g. travel costs paid by the
consortium) may be included in the estimated budget and be eligible for funding by the
Commission.
148
This grant will be awarded without call for proposals in line with Article 190(1)(e) of the Rules of applications
of Regulation (EU, Euratom) 966/2012, Regulation No 1268/2012 and Article 11(2) of the Rules for
participation and dissemination in "Horizon 2020 - the Framework Programme for Research and Innovation
(2014-2020)", Regulation (EU) No 1290/2013.

In line with Articles 2, 31.6 and 41.4 of the Model Grant agreement, the project arising from
this grant will complement other NCP network projects. This means that the beneficiaries and
those of the complementary grants must cooperate and provide access to their results. They
must conclude a written collaboration agreement regarding the coordination of the
complementary grants and the work of the action.
The project must end by August 2020.
Expected impact:
 An improved, more consistent and professionalised NCP service across Europe, thereby
helping to simplify access to Horizon 2020 calls, and lowering the entry barriers for
newcomers;
 An increase in the quality of proposals submitted, including those from countries where
success rates are currently lower than average.
The standard evaluation criteria, thresholds, weighting for award criteria and the maximum
rate of co-financing for this type of action are provided in parts D and H of the General
Annexes.
Legal entities:
Austrian Research Promotion Agency, Sensengasse 1, A-1090 Vienna, Austria
The Brussels Enterprise Agency - impulse.brussels, Chaussée de Charleroi 110, 1060

Brussels, Belgium
GIS - Transfer Center Foundation; Technology Transfer Center on Renewable Energy

Sources and Energy Efficiency, Acad. G. Bonchev Str., block 4, 1113 Sofia, Bulgaria
Agency for Mobility and EU Programmes, Frankopanska 26, 10000 Zagreb, Croatia
Research Promotion Foundation, PO BOX 23422, 1683 Nicosia, Cyprus
Estonian Research Council, Soola 8, 51013 Tartu, Estonia
Project Management Juelich (PtJ), Wilhelm-Johnen-Straße, 52425 Jülich, Germany
National Documentation Centre, 48 Vas. Constantinou Ave, 116 35 Athens, Greece
Icelandic Centre for Research - RANNIS, Borgartun 30, 105 Reykjavik, Iceland
ISERD, 4 Hayarden St., 7019900 Airport City (Lod), Isreal
APRE, Via Cavour 71, 00184 Rome, Italy
State Education Development Agency, Ministry of Education and Science of the Republic of
Latvia, Valnu iela 1, LV 1050 Riga, Latvia
IPPT PAN, Pawinskiego 5B, 02-106 Warsaw, Poland

FCT, Av. D Carlos I 126, 1249-074 Lisboa, Portugal
Centro para el Desarrollo Tecnologico Industrial - CDTI, C/ Cid, 4, 28001 Madrid, Spain
TUBITAK, TÜBİTAK Başkanlık Tunus Caddesi No:80 Kavaklıdere, 6100 Ankara, Turkey
Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., 76019
Ivano-Frankivsk, Ukraine
EU Energy Focus, c/o Microwire Ltd, 27 Porson Road, Cambridge, CB2 8ET, United
Kingdom
Type of Action: Grant to identified beneficiary - Coordination and support actions
Indicative timetable: 4th quarter 2018
2. 5th Concerted Action on the Energy Performance of Buildings Directive support to

Member States and participating countries for the implementation of the EPBD 149
Concerted action with regard to implementation of EU legislation and policy: It covers topics
where coordination and/or harmonisation of approaches would be beneficial, but is not
required by EU legislation. A concerted action is therefore designed to provide added value
compared with measures taken by each MS acting on its own and to achieve an optimum
combination of the various instruments at the disposal of both the EU and the MS.
A concerted action meets the conditions laid down in Article 190(1)(f) of the rules
implementing the Financial Regulation and the relevant procedures will be applied. Concerted
actions will be undertaken by organisations designated by the MS and countries participating
in the CA. The Commission Member States (MS) and participating countries (CA) concerns a
limited number of specific activities in relation to implementation of EU legislation and
policy. It aims at fostering exchanges of information and experience between MS and
participating countries with has the role of coordinating this kind of action with the countries
concerned.
Each concerted action will be allocated to a consortium of organisations designated and

entrusted by the participating countries, under the coordination of one member of the
consortium.
Annexes.
149
(2014-2020)", Regulation (EU) No 1290/2013.

Legal entities:
ENERGISTYRELSEN, Danish Energy Authority (DEA), Amaliegade 44, KOBENHAVN K

1256, Denmark
OSTERREICHISCHES INSTITUT FUR BAUTECHNIK, Austrian Institute of Construction

Engineering (OIB), Schenkenstrasse 4, WIEN 1010, Austria
CENTRE SCIENTIFIQUE ET TECHNIQUE DE LA CONSTRUCTION, The Belgian

Building Research Institute (CSTC), Rue du Lombard 42, BRUXELLES 1000, Belgium
SUSTAINABLE ENERGY DEVELOPMENT AGENCY (SEDA), 37 Ekzarh Jossif Str.,

SOFIA 1000, Bulgaria
MINISTRY OF ENERGY, COMMERCE, INDUSTRY AND TOURISM (MCIT), 6,

Andreas Araouzos str., Nicosia 1076, Cyprus
MINISTRY OF INDUSTRY AND TRADE (MPO), Na Frantisku, 32, PRAHA 1, 11015,

Czech Republic
BUNDESAMT FÜR WIRTSCHAFT UND AUSFUHRKONTROLLE, Federal Office for

Economic Affairs and Export Control (BAFA) Frankfurter Straße 29–35, 65760 Eschborn,
Germany
MAJANDUS- JA KOMMUNIKATSIOONIMINISTEERIUM, Ministry of Economic Affairs

and communications (MKM), Harju 11, Tallinn, 15072, Estonia
CENTRE FOR RENEWABLE ENERGY SOURCES AND SAVING (CRES), Marathonos

19TH KM, PIKERMI 19009, Greece
INSTITUTO PARA LA DIVERSIFICACION Y AHORRO DE LA ENERGIA, Institute for

Diversification and Energy Saving (IDAE), Calle Madera 8, MADRID 28004, Spain
MOTIVA OY (MOTIVA), Urho Kekkosen katu 4-6 A, Helsinki 00101, Finland
MINISTERE DE L'ENVIRONNEMENT, DE L'ENERGIE ET DE LA MER, French Ministry

of the Environment, Energy and the Sea (MEDDE), Grande Arche - Tour Pascal A et B,
Paris-La Défense 92055, France
MINISTARSTVO GRADITELJSTVA I PROSTORNOGA UREDENJA, Ministry of

construction and physical planning (MGIPU), Republike Austrije 20, ZAGREB 10000,
Croatia
EGYETEM TER 1, UNIVERSITY OF DEBRECEN, DEBRECEN 4032, Hungary
THE SUSTAINABLE ENERGY AUTHORITY OF IRELAND (SEAI), Wilton Park House,

Wilton Place, Dublin 2, D02T228, Ireland
AGENZIA NAZIONALE PER LE NUOVE TECNOLOGIE, L'ENERGIA E LO SVILUPPO

ECONOMICO SOSTENIBILE, Italian national Agency for new technologies, Energy and

Sustainable Economic Development (ENEA), Lungotevere Grande Ammiraglio Thaon di

Revel 76, ROMA 00196, Italy
STATYBOS PRODUKCIJOS SERTIFIKAVIMO CENTRAS, Certification Center of

Building Products (SPSC), Linkmenu Gatve 28, VILNIUS 08217, Lithuania
MINISTERE DE L'ECONOMIE (MinEco), 19-21 Boulevard Royal, LUXEMBOURG 2914,

Luxembourg
EKONOMIKAS MINISTRIJA, Ministry of Economics (ME), Brivibas Iela 55, RIGA LV

1519, Latvia
BUILDING REGULATION OFFICE (BRO), Horn Works Ditch, Emvin Cremona Street,
Floriana, FRN1280, Malta
MINISTERIE VAN ECONOMISCHE ZAKEN, Ministry of Economic Affairs (RVO),

Bezuidenhoutseweg 73, The Hague 2595 AC, Netherlands
NORGES VASSDRAGS- OG ENERGIDIREKTORAT, The Norwegian Water Resources

and Energy Directorate (NVE), Middelthunsgate gate 29, Oslo 0368, Norway
INSTYTUT TECHNIKI BUDOWLANEJ, Building Research Institute (ITB), Ul Filtrowa 1,

WARSAW 00 611, Poland
AGENCIA PARA A ENERGIA, Energy Agency (ADENE), Av. 5 de Outubro, nº 208, 2º

piso,1050-065 Lisboa, Portugal
MINISTERUL DEZVOLTARII REGIONALE, ADMINISTRATIEI PUBLICE SI

FONDURILOR EUROPENE, Ministry of Regional Development and Public Administration
(MDRAPFE), Libertatii 16, Latura Nord, sector 5, BUCHAREST, 050706, Romania
BOVERKET, National Board of Housing, Building and Planning (BOVERKET),

Drottninggatan 18, KARLSKRONA 37123, Sweden
TECHNICKY A SKUSOBNY USTAV STAVEBNY N.O., Building Testing and Research

Institute (TSUS), Studena 3, BRATISLAVA 821 04, Slovakia
GRADBENI INSTITUT ZRMK DOO, Building and Civil Engineering Institute (GI ZRMK)
Dimiceva Ulica 12, LJUBLJANA 1000, Slovenia
BUILDING RESEARCH ESTABLISHMENT LTD (BRE), Bucknalls Lane, WATFORD

WD25 9XX, United Kingdom
Indicative timetable: 2nd quarter 2018

3. Support for a Member States’ concerted market surveillance action on EU product

energy efficiency legislation150
Compliance by industry and dealers with EU product efficiency legislation is key to ensure
that the EU's energy efficiency targets are met. Non-compliance with these rules is estimated
to reduce the resulting savings by at least 10%. Enforcement of this legislation is the sole
competence of Member States.
This action aims to strengthen the enforcement of the Ecodesign Directive, the Energy
Labelling Directive and the Regulation on Labelling of Tyres, by supporting the coordination,
monitoring, verification and enforcement activities of national Market Surveillance
Authorities, in particular for those products that represent the highest energy saving potential
or those that represent new challenges (e.g. newly regulated products), thereby improving
compliance and increasing energy savings. The project should not replace activities that are
under the responsibility of Member States, but should add European value to them. The
project is expected to cover both horizontal activities (i.e. actions that are not product
specific) and vertical activities (i.e. actions targeting specific product groups). It may include
exchange of information and best practices, development of common methods, protocols,
checklists or IT tools (e.g. web crawlers), execution of joint surveillance activities,
strengthening the collaboration with customs authorities, communication, establishment of
centres of excellence for product testing, support the development of the Energy Labelling
products registration database, input into standardisation, addressing challenging issues like
defeat devices, software updates, plausibility testing, support for international alignment of
standards and requirements, etc.
The project shall have a Management Team consisting of representatives of MSAs, which is
responsible for supporting the Coordinator in decisions relating to the technical content of the
programme, planning of plenary meetings (including agenda), communication and
dissemination and reporting in agreement with nominated representatives from the
Commission. Each operational work package shall be led by a MSA representative, or other
relevant entity formally appointed by its national MSA to perform market surveillance
activities.
Annexes.
Legal entities:
Federal Ministry of Science, Research and Economy - Division I/9, Stubenring 1, 1011
Vienna, Austria
150
(2014-2020)", Regulation (EU) No 1290/2013.

Federal Ministry for Europe, Integration and Foreign Affairs, Minoritenplatz 8, 1010 Vienna
Österreichische Energiagentur, Austrian Energy Agency, Mariahilfer Straße 136, 1150 Viena,
Austria
Federal Public Service Economy, S.M.E.s, Self-employed and Energy, Directorate-General

Energy - Division Infrastructure et Contrôles (Energy labelling), Boulevard du Roi Albert II
16, 1000 Brussels
Federal Public Service Health, Food Chain Safety and Environment, Directorate-General
Environment (Eco design and tyre labelling), Place Victor Horta 40 boîte 10, 1060 Brussels
Commission for Consumer Protection (energy labelling + tyre labelling), 4А, Slaveykov Sq.,
1000 Sofia, Bulgaria
Stage Agency for Metrological and Technical Surveillance -Directorate-General Market

Surveillance (eco-design), 52А, "G.M.Dimitrov" Boulevard, Sofia 1797, Bulgaria
Ministry of Economy, Entrepreneurship and Crafts - Directorate for Economic Inspection -

Sector of Market Inspection, Ulica grada Vukovara 78, 10000 Zagreb, Croatia
Ministry of Energy, Commerce, Industry and Tourism - Energy Service, 6 Andreas Araouzos
Street, 1421 Nicosia, Cyprus
State Energy Inspection, Gorazdova 24 120 00 Praha 2
Ministry of Transport, Nábřeží Ludvíka Svobody 12/1222 P.O. Box9 110 15 Prague 1
Danish Energy Agency, Amaliegade 44, DK-1256 Copenhagen C
Danish Transport Authority, Edvard Thomsens Vej 14, DK-2300 Copenhagen S
Technical Regulatory Authority, Sõle 23 A, Tallinn 10614, Estonia
Environmental Inspectorate, Kopli 76 10416 Tallinn, Estonia
Finnish Safety and Chemicals Agency (Tukes), Kalevantie 2, FI-33100 Tampere, Finland
Finnish Transport Safety Agency (Trafi), P.O. Box 320, FI-00101 Helsinki
Ministère de l'Écologie, du Développement durable et de l'Énergie (MEDDE) - Direction

générale de l’énergie et du climat - Bureau des économies d'énergie et de la chaleur
renouvelable (ecodesign), Tour Séquoia 92055 Paris La Défense Cédex
Ministry of the Economy, Industry and the Digital Sector - Direction générale de la
concurrence, de la consommation et de la répression des fraudes - Unit 5A – Teledoc 241
(energy labelling and tyre labelling), 59 boulevard Vincent Auriol F-75703 Paris Cédex 13
Direction Générale des douanes et droits indirects , 11 rue des deux Communes 93, F-558
Montreuil Cédex, France

Thüringer Ministerium für Umwelt, Energie und Naturschutz, Max-Reger-Str. 4 – 8, 99096

Erfurt
Ministerium für Energie, Infrastruktur und Digitalisierung, Schloßstraße 6-8, 19053 Schwerin
Hessisches Ministerium für Wirtschaft, Energie, Verkehr und Landesentwicklung, Kaiser-

Friedrich Ring 75, 65185 Wiesbaden
Ministerium für Wirtschaft, Wissenschaft und Digitalisierung des Landes Sachsen-Anhalt,

Hasselbachstr. 4, 39104 Magdeburg
Sächsisches Staatsministerium für Wirtschaft, Arbeit und Verkehr, Wilhelm-Buck-Str. 2,

01097 Dresden
Ministerium für Wirtschaft, Arbeit, Energie und Verkehr, Franz-Josef-Röder-Str. 17, 66119
Saarbrücken
Ministerium für Umwelt, Energie, Ernährung und Forsten – Rheinland-Pfalz, Kaiser-

Friedrich-Str. 1, 55116 Mainz
Bayerisches Staatsministerium für Umwelt und Verbraucherschutz, Rosenkavalierplatz 2,

81925 München
Senatsverwaltung für Wirtschaft, Technologie und Forschung, Martin-Luther-Straße 105,

10825 Berlin
Ministerium für Klimaschutz, Umwelt, Landwirtschaft, Natur- und Verbraucherschutz des

Landes NRW, Schwannstr. 3, 40476 Düsseldorf
Niedersächsisches Ministerium für Umwelt, Energie und Klimaschutz, Archivstr. 2, 30169

Hannover
Behörde für Umwelt und Energie, Neuenfelder Str. 19, 21109 Hamburg
Der Senator für Umwelt, Bau und Verkehr, Ansgaritorstraße 2, 28195 Bremen
Ministerium für Arbeit, Soziales, Gesundheit, Frauen und Familie, Henning-von-Tresckow-

Str. 2-13, Haus S, 14467 Potsdam
Ministerium für Umwelt, Klima und Energiewirtschaft Baden Württemberg, Kernerplatz 9,

70182 Stuttgart
Ministerium für Energiewende, Landwirtschaft, Umwelt und ländliche Räume des Landes
Schleswig-Holstein, Mercatorstrasse 3, 24106 Kiel
Federal Ministry for Economic Affairs and Energy, Scharnhorststrasse 34-37 DE-10115
Berlin
BAM - Federal Institute for Materials Research and Testing Division S.4, Ecodesign and
Energy Labelling, 12200 Berlin

BAM - Federal Institute for Materials Research and Testing Department S, Working Group
Product Requirements, 12200 Berlin
Ministry of Economy, Development and Tourism - General Secretariat of Industry -

Directorate of Technical Industrial Legislation, Kaniggos sq. 10181 Athens - Greece
Ministry of Development & competitiveness, General Secretariat of Consumer Affairs,

Directorate for technical control , Pl. Kaninggos, 101 81 Athens
Hungarian Trade Licensing Office (MKEH) (Industrial and commercial products),

Németvölgyi út 37-39. 1124 Budapest
Hungarian Authority for Consumer Protection (HACP), 1088 Budapest, József krt. 6
Iceland Construction Authority, Skúlagata 21 - 101 Reykjavík
Department of Communications, Energy and Natural Resources, 29 - 31 Adelaide Road,

Dublin 2
Sustainable Energy Authority of Ireland, Wilton Park House, Wilton Place, Dublin 2, D02
T228
Ministry of Economic Development - Directorate General for the Market, Competition,

Consumers, Surveillance and Technical Standards - Division XIII - Technical Standards and
Safety and product conformity, Via Sallustiana, n.53 IT-00187 Roma
Ministry of Infrastructure and Transport -Directorate-General motorization, Via Caraci 36

00157 IT Roma
Ministero delle Infrastrutture e Trasporti - Consiglio Superiore dei Lavori Pubblici – Servizio
Tecnico Centrale, Via Nomentana, 2, Roma, Città Metropolitana di Roma, 00161 Lazio, Italy
Agenzia Nazionale Per Le Nuove Tecnologie, L'energia E Lo Sviluppo Economico

Sostenibile - Italian national Agency for new technologies, Energy and Sustainable Economic
Development (ENEA), Lungotevere Grande Ammiraglio Thaon di Revel 76, 00196 Roma,
Italy
Camera Di Commercio Metropolitana Di Milano-Monza-Brianza-Lodi, Metropolitan

Chamber of Commerce of Milano-Monza-Brianza-Lodi, Via Meravigli 9/B 000, 20123
Milano, Italy
Consumer Rights Protection Centre, Brivibas street 55, Riga, Latvia, LV-1010
State Non-Food Products Inspectorate, Gedimino Ave. 38 LT-01104 Vilnius
ILNAS – Surveillance du Marché, 1, avenue du Swing L-4367 Belvaux
Malta Competition and Consumer Affairs Authority - Market Surveillance Directorate,

Technical Regulations Division, Mizzi House, National Road, Blata l-Bajda, Hamrun, Malta
HMR 9010

Netherlands Food and Product Safety Authority (NVWA) (energy labelling), Catharijnesingel
59 3511 GG Utrecht
Human Environment and Transport Inspectorate (eco-design and tyre labelling), Koningskade
4, 2596 AA Den Haag
RDW, Europaweg 205 – NL 2711ER Zoetermeer
The Norwegian Water Resources and Energy Directorate (NVE), PO Box 5091 Majorstua,
0301 Oslo, Norway
Public Roads Administration , PO Box 8142 Dep, NO-0033 Oslo, Norway
Office of Competition and Consumer Protection - Market Surveillance Department, Plac

Powstańców Warszawy 1 00-950 Warszawa
Office of Competition and Consumer Protection - Trade Inspection Department , Plac

Powstańców Warszawy 1 00-950 Warszawa
Office of Electronic Communications - Department of Monitoring and Enforcement, 18/20

Kasprzaka Street 01-211 Warsaw Poland
Food and Economic Safety Authority (ASAE), Rua Rodrigo da Fonseca, nº 73; 1269-274
Lisboa
Regional Inspectorate for Economic Activities in the Madeira (IRAE Madeira), Rua Direita nº
27, 3º andar; 9050-450 Funchal
Regional Inspection of Economic Activities in the Azores (IRAE Açores), Rua Margarida de
Chaves, n.º 103, 9500 – 088 Ponta Delgada, São Miguel Açores
National Authority for Consumers Protection, 72 Aviatorilor blvd, sect. 1 – RO-O1865,

Bucharest
Romanian Energy Regulatory Authority (ANRE) - Department for Energy Efficiency, Str.
Cotroceni nr. 4, sector 6, 060114, Bucharest
Slovak Trade Inspection, PO Box 29 Prievozská 32 827 99 Bratislava 27 Slovak Republic
Market Inspectorate, Dunajska cesta 160 SI-1000 Ljubljana Slovenia
Inspectorate for Infrastructure , Vožarski pot 12, 1000 Ljubljana
Ministerio de Economía, Industria y Competitividad. Subdirección General de Calidad y

Seguridad Industrial (EcoDesign), P. de la Castellana 160. 28071 Madrid
Agencia Española de Consumo, Seguridad Alimentaria y Nutrición - AECOSAN. Consumer

Affairs, Food Safety and Nutrition Agency (Energy labelling and Tyre labelling), C/ Príncipe
de Vergara, 54. 28071 Madrid.

Dirección General de Industria, Energía y Minas de la Comunidad de Madrid, C/Cardenal

Marcelo Spínola, 14 – 28016 Madrid
Fundación para el Fomento de la Innovación Industrial (FFII), C/ José Gutierrez Abascal 2,

28006 Madrid
The Swedish Energy Agency, P.O. Box 310, SE-631 04 Eskilstuna
Ministry of Science, Industry and Technology - Directorate General for Safety and Inspection
of Industrial Products, Mustafa Kemal Mahallesi Dumlupınar Bulvarı (Eskişehir Yolu 7.Km)
2151. Cadde No:154 06510 Çankaya, Ankara
National Measurement and Regulation Office, Stanton Avenue Teddington Middlesex TW11
0JZ
International Vehicle Standards - Department for Transport, Great Minister House 33

Horseferry Road London SW1P 4DR
Stichting Prosafe - The Product Safety Enforcement Forum Of Europe (Prosafe), Avenue des
Arts, 41, B-1040 Brussels, Belgium
Vores Bureau ApS, Bredbjergvej 44, 5230 Odense M, Denmark
4. Support to the coordination of national research and innovation programmes in the

areas of activities of the European Energy Research Alliance (EERA) 151
The European Energy Research Alliance (EERA) plays a key role in the coordination of
European energy research actors along the SET Plan objectives. This includes the
participation of the joint programmes of EERA in the definition and accomplishment of the
specific sectorial implementation plans with the goal to reach the specific targets previously
defined in collaboration with industry and the official representatives of the SET Plan
countries.
The action will facilitate the coordination of EERA with the organisations responsible for
national research and innovation programmes in the SET Plan Member countries in support of
the SET Plan priorities and the execution of the corresponding implementation plans. This
151
(2014-2020)", Regulation (EU) No 1290/2013.

will include when appropriate the coordination of the public resources and capabilities of the
energy research organisations in the EU member states and associated countries.
Activities will include the organisation of regular meetings and workshops between European
energy research organisations, national research and innovation programme owners/
programme managers and other stakeholders to increase coordination between European
national research and innovation programmes.
Annexes.
Legal entities:
European Energy Research Alliance (EERA AISBL), Rue de Namur 72, 1000 Brussels,
Belgium
5. Support to the initiative on sustainable energy in the defence and security sector152
A specific consultation mechanism with Member States experts from the defence sector based
on the model of the existing Concerted Actions and set up by the Commission
Communication COM(2013) 542 final of 24 July 2013153 and confirmed in the Commission
Report COM(2014) 387 final of 24 June 2014 154 . This mechanism focuses on a) energy
efficiency, particularly in building sector; b) renewable energy and alternative fuels; c) energy
infrastructure, including the use of smart grid technologies and:
 Examine the applicability of the existing EU energy concepts, legislation and support
tools to the defence sector.
 Identify possible objectives and focus areas of action at EU level for a comprehensive
energy concept for armed forces.
152
(2014-2020)", Regulation (EU) No 1290/2013.
153
"Towards a more competitive and efficient defence and security sector" http://eur-lex.europa.eu/legal-
content/EN/TXT/PDF/?uri=CELEX:52013DC0542&from=EN
154
"A New Deal for European Defence - Implementation Roadmap for Communication COM (2013) 542; Towards
a more competitive and efficient defence and security sector" http://eur-lex.europa.eu/legal-
content/EN/TXT/PDF/?uri=CELEX:52014DC0387&from=EN)

 Develop recommendations for a guidebook on renewable energies and energy efficiency

in the defence sector with a focus on the implementation of the existing EU legislation,
innovative technologies’ deployment and the use of innovative financial instruments.
 Exchange information with the SET-Plan Steering Group on a regularly basis.
Exchanges, analyses and training to Member States on the implementation of EU policies and
legislation on energy efficiency, renewable energy and energy infrastructure.
This action aims at facilitating exchanges of good practices with using renewables and
promoting energy efficiency in the civilian types of energy use in the defence sector.
Annexes.
Legal entities:
European Defence Agency (EDA), Rue des Drapiers, 17-23, B-1050 Ixelles (Belgium)
6. Support to the Austrian Presidency Conference on the European Strategic

Technology Plan (SET-Plan) 2018155
Austria will organise the 11th Strategic Energy Technology Plan conference. The conference
will take place in Austria during the Austrian Presidency of the Council of the European
Union.
Annexes.
Legal entities:
AIT Austrian Institute of Technology GmbH, Giefinggasse 2, 1210 Vienna, Austria
155
(2014-2020)", Regulation (EU) No 1290/2013.

Indicative timetable: 2nd quarter of 2018
7. Support to disruptive innovation in clean energy technologies156
This action shall support the implementation of the pilot on 'disruptive innovation in clean
energy technologies'. This pilot aims to crack specific technological challenges, while
emphasising societal impact and market relevance. Projects selected under this pilot will
follow a stage-gate approach based on milestones and periodic reviews.
This action shall support selected projects under topic LC-SC3-RES-2-2018 during their
lifetime with continuous innovation and business development, including completing the
market uptake supply chain, with the aim to strengthen the consortium's innovation
performance. During the first 6 months of the projects' lifetime, the action shall perform a
deep-dive assessment of the feasibility and innovation potential of the proposed solution or
application, analysing a.o. the business and innovation strategy, the technology readiness level
of the proposed application, the consortium's freedom to operate (e.g. background,
foreground, IP), and the market. Since the action is part of a pilot, the assessment of 'lessons
learned' will be a key deliverable. The beneficiary shall establish appropriate confidentiality
and conflict of interest procedures for carrying out the related activities.
Annexes.
Legal entities:
InnoEnergy SE, Kennispoort, John F. Kennedylaan 2, 5612 AB Eindhoven, The Netherlands
156
(2014-2020)", Regulation (EU) No 1290/2013.

8. Contribution to the IEA & Energy Transition Support157
Given the momentum to implement commitments undertaken by the EU and others in the
framework of the Paris Agreement, the EU will support and help shape sustainable energy
policies in emerging economies. With its specific all-of-energy expertise, the International
Energy Agency is well placed to support EU's work in helping guide major emerging
economies' (such as China, Indonesia, Brazil, India, South Africa and Mexico) energy
transition through policy advice and guidance efforts.
The proposed activities primarily aim to accelerate energy transition efforts in emerging
economies by:
 Strengthening training and capacity building, targeting improved ability to develop a

sound, analytically rigorous evidence base for policy action (via statistics, indicators,
energy modelling, and improved data analysis capabilities);
 Building more effective knowledge and information systems, as well as enabling

environments, creating capacity for stronger policy action (via country-specific scenario
development, modelling capacity, advice and support on policy development, and
facilitating knowledge exchange as relevant to country needs);
 Building a more robust international energy and climate architecture, by complementing

and facilitating implementation of other initiatives, supporting multilateral efforts to
facilitate and enable NDC implementation, and by strengthening connections and
collaboration between experts across countries and relevant global expertise; and
 Encouraging technology RDD&D and innovation, through specific technology policy

support activities, which should encourage the promotion of sustainable energy
technologies and related investments.
Given the close link between a sustainable energy transition and meeting GHG mitigation
objectives, the above outcomes also would bolster these key countries as they develop,
implement, and further strengthen their NDCs under the Paris Agreement.
Annexes.
Legal entities:
157
(2014-2020)", Regulation (EU) No 1290/2013.

International Energy Agency (IEA), 31-35 rue de la Fédération, 75739 Paris Cedex 15 France
Indicative timetable: as of 1st quarter 2019 and as of 1st quarter 2020
Indicative budget: EUR 2.00 million from the 2019 budget and EUR 1.50 million from the
2020 budget
9. Support to the Romanian Presidency Conference on the European Strategic

Technology Plan (SET-Plan) 2019 with a focus on regional dimension158
Romania will organise a High-Level Strategic Energy Technology Plan conference with a
special emphasis on the European regional dimension. The conference will take place in
Romania during the Romanian Presidency of the Council of the European Union.
Annexes.
Legal entities:
Romanian Municipalities Association, Matei Basarab Street no. 63, District 3, 030672,
Romania
158
(2014-2020)", Regulation (EU) No 1290/2013.

10. Support to the Finish Presidency Conference on the European Strategic Technology
Plan (SET-Plan) 2019159
Finland will organise the Annual Strategic Energy Technology Plan conference in 2019. The
conference will take place in Finland during the Finish Presidency of the Council of the
European Union.
Annexes.
Legal entities:
Any entity designated by the Presidency under its responsibility
11. Technical assistance to assess renewable energy potential in Central and South-
Eastern Countries (CESEC region) 160
The objectives of the Renewable Energy Roadmaps (REmap) study for South East Europe
are:
 To assess the status of renewable energy deployment in the Base Year (2015) on a
country-by-country basis and across the region;
 To assess the expected renewable energy deployment with policies in place until 2030
(Reference Case) for the eleven countries in the region;
159
(2014-2020)", Regulation (EU) No 1290/2013.
160
(2014-2020)", Regulation (EU) No 1290/2013.

 To identify cost-effective technical options for accelerated renewables deployment in

energy supply (power and district heating) as well as end-use sectors (buildings,
transport and industry) in terms of potentials and cost competitiveness by 2030;
 To develop REmap scenario for the region with a 2050 timeframe exploring the long-
term role of renewables across all sectors;
 To assess the role that renewables can play in the decarbonization of the region;
 To identify opportunities for further energy sector integration (power sector, sector
coupling, biomass trade) between countries within the region as well as with the
European Union;
 To assess the impact of higher shares of renewables in terms of greenhouse gas

emissions, costs and benefits of environmental and health externalities, energy security
as well as in terms of investment needs in the energy sector;
 To provide recommendations at regional level to unleash the renewable potential

identified.
The scope of the study are the countries that are member High Level Group "Central and
South Eastern Europe Gas Connectivity" (CESEC)161. For many of the countries (in particular
EU-28 countries), there will be already comprehensive data available that the study can build
on and use for aggregation of data.
Annexes.
Legal entities:
IRENA, Masdar City, P.O. Box 236, Abu Dhabi, United Arab Emirates
Indicative timetable: 3rd quarter 2018
161
Austria, Bulgaria, Croatia, Greece, Hungary, Italy, Romania, Slovakia and Slovenia, Ukraine, the Republic of
Moldova, Serbia, the Former Yugoslav Republic of Macedonia, Albania, Bosnia and Herzegovina, Kosovo, and
Montenegro.

Public procurements
1. Provision of technical assistance, IT tools, modelling and/or studies to collect and

analyse relevant data and to properly assess complex technical, environmental,
economic, legal and social aspects of energy efficiency162
The services contracted under this point will provide the Commission with the expertise
needed to inform policymakers with an objective and unbiased judgement of the likely
impacts of different policy options and, allow an efficient implementation and monitoring of
existing legislation in the area of energy efficiency (EED, EPBD, Ecodesign, Energy
Labelling and Labelling of Tyres Directives).
The services will address technical, economical, legal aspects linked to, for example, the
analysis of calculation method of Member States, the verification of compliance of national
legislative measures implementing the directives, assessments of certain costs and/or benefits
of the energy efficiency policies, the support to the standardisation of instruments (calculation
methodologies and common certification.
Provision of technical assistance, studies and IT tools to collect and analyse relevant data and
to properly assess complex technical, environmental, economic, legal and social aspects of
different product groups in order to inform policymakers with an objective and unbiased
judgement of the likely impacts of different policy options and allow an efficient monitoring
of existing legislation and technical support to the Commission on standardisation work for
energy related products.
The services will provide preparatory and review studies, technical assistance (including
where appropriate IT tools) and impact assessment studies for identified product groups.
Type of Action: Public Procurement - 1 single framework contract, 28 specific contracts

under framework contracts or direct service contracts
Indicative timetable: As from 1st quarter 2018 and as from 1st quarter 2019 and as from 1st
quarter 2020
2019 budget and EUR 3.50 million from the 2020 budget
2. Study on the role of smart technologies in residential buildings163
Forward looking study to create a better understanding of the role of smart technologies in
achieving higher comfort levels and wellbeing for building occupants; the link between
162
163

buildings quipped for electro-mobility and smart appliances, products and local grid
networks; and adaptation of buildings to the needs of an aging population.
Type of Action: Public Procurement - 1 service contract
3. Multiple Framework contract with reopening of competition for qualified legal,

technical and economic expertise in the field of Energy Efficiency to support the
Commission in the design, preparation and proper implementation of EU initiatives and
legislation in the area of Energy Efficiency 164
The purpose of the framework contract with reopening of competition is to provide at short
notice the contracting authority with highly qualified external expertise to support with
objectivity the contracting authority in the design, preparation and proper implementation of
EU initiatives and legislation in the area of Energy Efficiency. The maximum amount of the
Multiple Framework contract will be EUR 4.000.000 for a period of 4 years.
Type of Action: Public Procurement - 1 multiple Framework service contract with reopening
of competition
Indicative timetable: 1st quarter 2018
Indicative budget: EUR million from the 0 budget(Commitments will be made through
specific contracts)
4. Technical support for renewable heating and cooling165
Technical support for policy development and implementation in the field of renewable (RES)
heating and cooling addressing the following key areas
 Technical requirements and regulatory options of TPA for RES and waste heat in
District heating & cooling;
 Costs and feasibility of deploying renewables in the space heating sector (buildings) in
EU and by MS;
 Electrification of heating in the building sector;
164
165

 Heat decarbonisation trajectory scenarios through renewables in the building related

heating sector by 2050, including an assessment of the renewable district heating and
cooling potentials by 2050;
 Renewable cooling;
 Best practice overview of national strategies and national policies of switching the
building sector to renewable heating and cooling and comparison with other non-RES
decarbonisation options with identification of commonly applicable tools, policies,
regulations and approaches, including financing;
 Industrial and other process heat decarbonisation pathways, the role and share of
renewable energy in comparison with other decarbonisation options (energy efficiency,
CCS, hydrogen technologies, etc.;
 Support for policy and market issues for decarbonisation of heating initiatives.
 Policy development support for national district heating sectors' transition;
 Support for energy communities, consumer initiatives and micro-district systems in

renewable heating and cooling.
Type of Action: Public Procurement - 10 direct service contracts in 2018, 2019 and 2020
Indicative timetable: 4 tenders as from 1st quarter 2018, as 3 tenders from 1st quarter 2019
and 3 tenders as from 1st quarter 2020
5. Provision of technical assistance and/or studies to support the implementation of the

heating and cooling strategy 166
Provision of technical assistance and/or studies to support the implementation of the heating
and cooling strategy, in particular for setting up sectoral round tables with industry and
developing guidance/best practices.
Type of Action: Public Procurement - 3 direct service contracts
Indicative timetable: 2nd quarter 2019 and 2nd quarter 2020
2020 budget
166

6. Product registration database at EU level 167
The study for the review of Directive 2010/30/EU on Energy labelling of energy-related
products highlighted non-compliance issues as the main cause of a loss of about 10% of
envisaged energy savings from product-specific measures. To correct this policy failure the
Commission proposed to establish a product registration database at EU level to support
enforcement by Member States. The database is developed under the central management of
the Commission and manufacturers will have to register their models before placing them on
the market. The database has to be operational (i.e. populated with data and accessible to all
users) at the latest by 1/1/2019.
Type of Action: Public Procurement - 4 specific contracts under framework contracts
Indicative timetable: as from 1st quarter 2018, as from 1st quarter 2019 and as from 1st
quarter 2020
7. Support for the development and implementation of the EU Energy Star Programme
including maintenance of the website, development of new technical specifications,
impact analysis and market penetration survey 168
Maintenance of the website ensures the registration of industries (def. partners in the
programme), product compliance check (on provided declarations, no 3rd party control) and
public availability of data. Development of new specifications provides technical support for
negotiations with US-EPA on requirements tightening.
Indicative timetable: 1st quarter 2019 and 1st quarter 2020
2020 budget
167
168

8. Technical assistance for communication and evaluation purposes related to energy

efficiency169
Provision of technical assistance to the Commission for collecting and processing information
of all kinds needed for the analysis and promotion of Energy Efficiency projects financed
under Horizon 2020, such as the evaluation of the 2nd Concerted Action on the Energy
Efficiency Directive; the 4th Concerted Action on the Energy Performance of Buildings
Directive. Services will also address technical assistance related to information and
communication, conferences and events promoting activities on energy efficiency, including
electronic and paper publications, audio-visual products as well as the development of
different web based and social media activities directly linked to the achievement of the
objective of the energy efficiency policy.
Type of Action: Public Procurement - specific contracts under existing framework contract
Indicative timetable: As of 1st quarter 2018 and as of 1st quarter 2019 and as of 1st quarter
2020
9. Support to Smart finance for smart buildings initiative170
Provision of technical assistance and high level financial/economic expertise to support the
development of an investible market framework for energy efficiency. Specific contracts
under one single framework contract to address the following type of activities:
 EEFIG 3.0 activities, studies on the valuation of externalities related to energy efficiency
investments;
 Mapping of energy efficiency financing schemes across Europe;
 Mapping of energy efficiency services available and progress in setting up one-stop

shops in Europe.
Type of Action: Public Procurement - 1 single framework contract and 3 specific contracts in
2018, 4 specific contracts in 2019 and 3 specific contracts in 2020
Indicative timetable: 2nd quarter 2018, and 2nd quarter 2019 and 2nd quarter 2020
169
170

10. Tender on "Energy Efficiency Finance Market Place"
In complement to the activities carried out at European level to support the implementation of
the Smart Finance for Smart Buildings initiative, in co-operation with the EEFIG, there is a
need to further engage with stakeholders at national level on the specificities of energy
efficiency finance, in order to identify obstacles, facilitate a common understanding and
create co-operation between the financial sector, governments, industry and consumers.
This service contract will build on the Sustainable Energy Investment Forums and focus on
the national and regional levels, through the organisation of public events and stakeholder
dialogue roundtables at national level on energy efficiency finance, as well as targeted EU
events disseminating the lessons learned from ongoing initiatives (EU, national and regional
levels, in particular from Horizon 2020 projects).
Type of Action: Public Procurement - 1 direct service contract
Indicative timetable: As of 1st quarter 2018
11. Assessment of Finance projects covering PDA, De-risking and Innovative Finance
The aim of the tender is to assess the impacts and the achievements of the energy efficiency
financing related projects supported under the Energy Efficiency Calls in Horizon 2020,
including call topics on:
 project development assistance, i.e. projects focussed on developing a concrete

investment pipeline at local and regional level;
 innovative financing schemes, i.e. projects looking at how to match demand and supply
of finance for energy efficiency with a focus on attracting private finance;
 energy performance contracting, in which investments are designed by an Energy

Service Company which guarantees the energy savings and usually makes the upfront
investments;
 making the energy efficiency market investible, e.g. projects looking at how to reduce
the perceived risk of energy efficiency projects, reduce transaction costs and change the
financial institutions evaluate and process investments in energy efficiency.
This service contract will analyse the projects and their outcomes, evaluate the impact, collect
lessons learned and analyse what market gaps still need to be addressed in order to enhance
access to finance for energy efficiency investments.

12. Evaluation of projects in Industry area
The aim of the tender is to assess the impacts and the achievements of the industry related
projects supported under the programme IEE II (2007-2013) and the Energy Efficiency Calls
in Horizon 2020. The results of this assessment are expected to contribute to the definition of
industry related actions to be supported in the future under FP9.
13. EASME external communication activities (publications, audiovisual, events)
Organisation and logistic support for EU Sustainable Energy Week.
This action will also support the organisation of stakeholders meetings and other
communication activities aiming at the exchange and replication of successful practices.
Type of Action: Public Procurement - direct service contracts and specific contracts under
existing framework contract
Indicative timetable: As of 1st quarter 2018, as of 1st quarter 2019 and as of 1st quarter 2020
14. Support to Research and Innovation Policy in the areas of Renewable Energy,
Carbon Capture and Storage and More Efficient Coal Combustion171
Specific contracts under the Multiple Service Framework Contract 'Studies in Support to
Research and Innovation Policy in the areas of Renewable Energy, Carbon Capture and
Storage and Clean Coal' – (PP-02161-2014) addressing technical, economic and policy
analysis to support various aspects of the Research and Innovation policy in one or more areas
of the energy field.
The areas concerned are i) renewable electricity (e.g. wind power, photovoltaics, concentrated
solar power, bioenergy, enhanced geothermal systems, ocean energy, hydro power), ii)
heating and cooling through renewable energy and fossil fuels, iii) biofuels, iv) Carbon
Capture and Storage, including utilisation of Carbon Dioxide and v) More Efficient Coal
Combustion.
These analyses required in the terms of reference of the specific contracts may include:
171

 Technology foresight and potential;
 Analysis of the above specified EU energy areas vis-à-vis global competitors as well as
vis-à-vis other technologies at the various levels of the supply lines: an overview and
analysis of trends in the different renewable energy sectors and possible synergies with
Carbon Capture and Storage. Key factors to maintain global technological leadership.
 Research and innovation strategies of major international players, including inventory,

impacts and best practices of the support put in place in leading countries;
 Impact of various European and national, regional, local policies (energy, industrial and
SME policy, fiscal, environmental, employment, R&D etc.)
 Economic analysis e.g. business cases, supply line economics, value-added analysis;
 Market take-up issues;
 Environmental and health related impacts of projects in the above specified areas and
possible areas for risk mitigation to be undertaken by research and innovation;
 Public perception and awareness;
 Analysis of capacities and skills.
Type of Action: Public Procurement - 6 specific contracts in 2018 and 6 specific contracts in
2019
Indicative timetable: as of 1st quarter 2018 and as of 1st quarter 2019
2019 budget
15. Dissemination and information activities172
Communication activities such as meetings, conferences, out-reach communication

events/papers/materials and publications should support dissemination of knowledge and
information to relevant stakeholders.
Type of Action: Public Procurement - either direct service contract or through existing
Framework Contract
Indicative timetable: as of 1 quarter 2018, as of 1 quarter 2019 and as of 1 quarter 2020
172

16. Information services for energy research and innovation policy development 173
An information platform is planned to be used to gain a better understanding of the energy

research sector. Intelligence gained through the platform will help to establish priority areas,
base policy decisions on hard evidence, and allocate resources optimally.
Type of Action: Public Procurement - 1 service specific contract in each of 2018, 2019 and
2020 using an existing framework contract
Indicative timetable: as of 2nd quarter 2018, as of 2nd quarter 2019, and as of 2nd quarter
2020
17. Information, communication and logistic support for EU #1 in RES174
EU as global leader in renewables is one of the three main goals of the Clean Energy for all
Europeans Package. To support the policy dialogue, analysis, communication and logistics
assistance will be necessary. This will include, studies on KPIs for EU's global leadership
role, EU global positioning, support to political dialogue in international forums, and
communication activities in major global capitals based on the concept of the EU energy days.
Type of Action: Public Procurement - 2 direct service contracts in 2018 and 2020
Indicative timetable: 1st quarter in 2018 and 2020
2020 budget
18. Support services for exploitation of research results (SSERR)175
A framework contract for Support Services for Exploitation of Research Results SSERR has
been concluded in 2015 for four years. This framework contract provides to the Commission
external assistance for an on-demand service for the benefit of former and current grant
beneficiaries of the Energy Theme of the FP7 Cooperation Specific Programme and of the
Energy Challenge of Horizon 2020 in view of supporting them with the exploitation of their
EU-funded research results.
173
174
175
and will be implemented by the Commission services

The framework contract consists of four predefined support services and two services to be
agreed with the beneficiaries on a case-by-case basis. The services involve, inter alia,
identification of market potential and opportunities, evaluation of competing technologies,
development of business and action plans, pitching results, assessment of the costs for
upscaling, and protection of IPR.
Specific contracts will be concluded in 2018 and in 2019 based on the individual needs of the
grants to be assisted.
Type of Action: Public Procurement - up to 40 specific contracts in both 2018 and 2019 using
an existing framework contract
Indicative timetable: 1st quarter 2018 until 4rd quarter 2019
2019 budget
19. Assessment of the impacts of EU-funded RD&D projects in the area of fuel cells and
hydrogen176
The aim of this action is to qualify and quantify the socio-economic, environmental and other
impacts of EU-funded research and demonstration projects in the area of fuel cells and
hydrogen.
Type of Action: Public Procurement - 1 service contract under existing framework contract
Indicative timetable: 1st half 2018
20. Contest implementation, management and communication services related to the

second and third Phase of the international Mission Innovation Prize Program177
The Mission Innovation (MI) Prize Program, called MI Champions Program, is a new
recognition program to celebrate and support innovative individuals around the world who are
accelerating the clean energy revolution. This program was launched at the MI third
ministerial meeting in May 2018 in Malmö, Sweden. The first cohort of MI Champions will
be presented at MI fourth ministerial in Vancouver in 2019.
Bolt-on support is required for the further implementation of the second and third Phase of the
MI Prize Program. This will allow the second and third cohort of MI Champions to be
presented to MI fifth and sixth ministerial meetings taking place in 2020 and 2021
176
177

respectively. The support will entail, in particular, contest launch, implementation and
management, communication, marketing and outreach activities. This second and third Phase
of the program will have to ensure continuity with the first phase and use the same selection
process based on openness, transparency and fairness.
Type of Action: Public Procurement - 1 direct service contract for a duration of 2 years
21. Assessment of advanced biofuels, including deployment potential of new/ appearing

feedstocks, feedstock availability, resource competition, and sustainability issues in the
context of the Renewable Energy Directive Article 3(4)178
Article 3(4) of the Renewable Energy Directive allows extend the list of feedstock's that are
eligible for double counting based on an analysis. A similar provision is included in the
proposal for the RED post 2020. Technical support is necessary to assist the Commission's
work on fulfilling its obligations.
Type of Action: Public Procurement - 1 specific contract under existing framework contract
22. Assessment of carbon fuels produced from fossil waste streams, including
deployment potential, resource competition and decarbonisation potential179
Article 25 of the proposal for the RED post 2020 sets out an incorporation obligation covering
in addition to renewable fuels also fuels produced from fossil waste streams. Further, the
Commission is empowered to set out a methodology for estimating the GHG emission
savings of these fuels. The study is aiming to provide the Commission with useful
information for this exercise.
178
179

23. Technical requirements for track and trace databases180
Article 25 of the proposal for the RED post 2020 requires Member States to set up data bases
that allow tracing of biofuels and other low carbon fuels. The Commission is empowered to
set out technical parameters of such data bases enabling among other things the exchange of
data between individual national data bases. Technical support is necessary to assist the
Commission's work on fulfilling its obligations.
24. Support for the implementation of the ILUC- Directive181
The support will address the following areas:
 Technical assistance on the implementation of the ILUC- Directive
Directive (EU) 2015/1513 revised the Renewable Energy with the objective to reduce the risk
of indirect land use change (ILUC) and to prepare the transition towards advanced biofuels.
This directive introduced additional requirements for the Commission (in force as of 5
October 2015) and the Member States (transposition deadline: 10 September 2017) and
effectively implemented in view of reaching the mandatory 2020 target of 10% share of
renewable energy in transport sector.
Technical and legal support is necessary to assist the Commission's work on fulfilling its
obligations under the ILUC – Directive, as well as for assessment of the Member States'
progress on transposition and implementation of the ILUC – Directive.
This work should be carried out by taking into account that on 30 November 2016, the
Commission adopted a legislative proposal for a recast of the Renewable Energy Directive for
the time period 2020–2030, including sustainability criteria, GHG emission requirements, and
measures for promotion of renewable energy in transport sector.
 Potential for mitigating ILUC impacts (desk assessment + 3 pilot studies)
Article 2 (w) on the Renewable Energy Directive includes at definition of low indirect land
use change biofuels. This includes biofuels produced from crops for which impacts on
indirect land use change are mitigated by increasing crop yields and use of abandoned land.
180
181

The tender aims to explore how this approach could be implemented in practise applying a
certification approach.
25. Technical assistance for the implementation of the EU bioenergy sustainability

criteria182
Recast of the RES Directive, article 26 (5) to (8) includes revised EU bioenergy sustainability
criteria covering also biomass and biogas for heat and power. The service contracts will
provide the technical support that is necessary to assist the Commission's work in fulfilling its
obligations.
Indicative timetable: 1 contract in the 1st quarter 2018, 2 contracts in the 1st quarter of 2019,
and in 2020
26. Supply side flexibility of combined renewable energy systems (non-variable and
variable). Assessment of development, barriers and regulatory aspects of combined RES
supply systems of gaseous renewable fuels and variable RES183
Renewable gaseous fuels (biogas, biomethane, renewable hydrogen, power – to gas) can be
used as final fuel (to replace natural gas), stored and/ and or transformed in different types of
fuels (electricity and heat). However, this potential is insufficiently used so far.
With maturing gaseous RES markets and increasing share of variable RES, interest in
combination of on-demand and variable renewables (solar, wind) is growing as it has a
potential to increase both the efficiency and flexibility of the whole energy supply system.
Interest in application of and support for such solutions in the time period until and after 2020
is growing in the Member States, especially in those with high variable RES shares and high
diversification level of RES technologies. However, information on developments in the EU
MS and market and regulatory issues to be addressed is limited and dispersed
182
183

27. Technical support for RES policy development and implementation184
Provision of technical support for the implementation of the directive based on the proposal
COM (2016) 767 (RED recast) and to further develop policy frameworks for renewable
technologies and their deployment with a particular focus on electricity generation. This
would include studies of industry competitiveness, facilitation of standardisation (e.g.
offshore wind), analysis of administrative procedures and permits to support the "one stop
shops", and analysis of financial support schemes
Indicative timetable: 1 contract 2nd quarter of 2018, 1 contract 2nd quarter of 2019, and 1
contract 2nd quarter of 2020
28. Support for policy and market development for alternative and renewable transport
fuels and products185
The aim of this action is to support the European industry, producers and market operators
engaging in policy dialogue with the European Institutions and national governments in order
to facilitate addressing common issues on markets, policy and regulation that hinder the
deployment of alternative and renewable fuels and products.
The action is addressing the following key areas:
 Support for alternative and renewable liquid and gaseous fuels forum
The objective is to facilitate addressing common issues on markets, policy and regulation that
hinder the deployment of the alternative and renewable fuels, in particular in relation to the
Renewable Energy Directive and the Mobility Package. The activities will be complimentary
to those of ETIP Bioenergy.
 Support for market development of algae and their products
The objective is to support the European algae industry on addressing and facilitating the
deployment of algal-refineries supplying multiple products (chemicals, feed, cosmetics etc.)
184
185

in addition to biofuels. Coproduction of algal fuels and other products can significantly reduce
the costs of algal fuels and improve their overall market attractiveness.
 Support for policy and market analysis for the deployment and valorisation of industrial
COx utilisation (CCU)
The objective is to support the European CCU industry in creating a forum from all sectors of
the industry for the deployment of alternative and renewable fuels, chemicals, and products
(e.g. cement) representing both COx producers and CCU market operators. The forum will
address common issues on markets, policy and regulation that hinder the deployment of the
such CCU applications in the market,
Type of Action: Public Procurement - 2 direct service contracts in 2018 and 1 direct service
contract in 2019
Indicative timetable: 3rd quarter 2018 and 1st quarter 2019
2019 budget
29. Analysis of actual land availability in the EU; trends in changes (abandoned land,
low fertility land, saline land etc.) and options for energy crop utilisation186
EUROSTAT and FAO data indicate that there is significant agricultural land that is
abandoned continuously in the EU at accelerating rates with adverse effects on the EU
farming community and economy. The abandonment is due to several social and economic
reasons. The study should analyse the reasons, establish a reliable estimate on the extent of
the abandoned land in the EU and then analyse options for using it for energy crop
deployment.
30. Support for the planning and deployment of efficient, low carbon District Heating
and Cooling in cities187
The advanced implementation of the first smart cities projects with a special focus on DHC
and the good replication policy created a great interest for the DHC sector in numerous cities.
186
187

The aim of this action is to support our cities in their endeavour to plan and deploy new,
efficient DHC systems or extend, refurbish existing ones to higher standards allowing greater
uptake of renewables, recovering of excess heat, improving the overall efficiency of the
systems.
The objective is to facilitate the deployment of smart DHC with planning tools, trainings, best
practices and tailor made technical and financial expertise.
31. Research & Innovation communication activities 188
The purpose of this action is to support the development and implementation of

Communication strategies and activities, boost greater stakeholder engagement and inform an
even wider audience in the area of EU Energy Research and Innovation policies in general
and SET Plan Strategy in particular. The aim is to carry out an effective information
campaign on ongoing initiatives (i.e. for SET-Plan, Mission Innovation, of actions stemming
out of the Accelerating Clean Energy Innovation Communication) in this field, in a proactive
and informative way.
Tasks involve, inter alia, the conception, definition, planning and contribution to
communication campaigns, identification of key messages, tailor-made dissemination and
information plans, follow-up on key findings for a more sustained and impactful
communication strategy for SET Plan over the medium and long term, advertisement and
advice, production of content, etc. Organisation of events such as meetings and conferences,
publications, mapping and provision of information to relevant stakeholders etc., are some of
the envisaged outcomes.
Type of Action: Public Procurement - 3 specific contracts under existing framework contract
and direct service contracts
Indicative timetable: 4th quarter 2018, and as of 1st quarter 2019 and 2020
188

32. Support Services for the Covenant of Mayors for Climate and Energy 189
The new "Covenant of Mayors for Climate and Energy" was endorsed in October 2015,
merging the Covenant of Mayors with its sister initiative - Mayors Adapt and extending cities
commitments to energy and climate changes actions to 2030.
Following the success of the Covenant of Mayors in Europe and the European neighbourhood
(CoM – East) regional Covenants were launched in 2017 by the Commission: in i) North
America and Mexico; ii) Latin America and Caribbean; iii) Japan; iv) China; v) India; vi)
South-East Asia, as part of the International Urban Cooperation (IUC) Programme , with the
exception of sub-Saharan Africa, where Covenant of Mayors is a separate initiative launched
in 2016.
Since 2017, the Covenant of Mayors office providing support services to the EU Covenant of
Mayors for Climate and Energy acts also as central support unit for the IUC programme.
In parallel, the Covenant of Mayors initiative merged with the Compact of Mayors into a
Global Covenant of Mayors (GCoM). This merger creates a single coalition of cities taking
action on climate change and brings together the signatories of the EU-funded Covenants
(CoM Europe, CoM-East and Regional Covenants) and the Compact of Mayors.
Two actions are envisaged:
1) Support services, in particular for the operations of its Brussels-based office
The services to be covered by a new tender will include amongst others:
 Promotion of the Covenant of Mayors for Climate and Energy to encourage new
signatories
 Communication activities, including web-based and in media
 Technical assistance to signatories of the Covenant of Mayors for Climate and Energy,
 Organisation of workshops, seminars and tailor-made training and information events
 Capacity building and networking with relevant stakeholders and supporting structures
 Supporting synergies and interactions with relevant EU urban energy actions and
policies and with initiatives covering islands, coastal and remote regions
 Cooperating with the Secretariat of the Global Covenant of Mayors
 Facilitate signatories' access to finance for implementation of actions from their

SEAPs/SCEAPs.
189

 Ensuring of operation of technical and administrative capacity of the Covenant of

Mayors Office;
 Providing central support in relation to the IUC programme to Offices on different

regions
Given that the scope of activities includes both services that were previously covered by the
Mayors Adapt initiative and support to the IUC programme, contributions from corresponding
Programmes can be expected to complement the indicated budget.
2) Support for events under the Covenant of Mayors Investment Forum
The Covenant of Mayors Investment Forum consists of a series of events to be organised in

different cities across Europe in 2018 and 2019. The Investment Forum aims to bring together
mayors and city representatives, Commission, industry and financial institutions. The events
will showcase best practices and innovative financing solutions from concrete projects and
aim at catalysing major investments in energy efficiency, renewable and smart energy projects
in municipalities and regions participating in Covenant of Mayors.
Type of Action: Public Procurement - 1 direct service contract and 3 contracts using
framework contract
Indicative timetable: 1st and 3rd quarter 2018, 1st, 3rd and 4th quarter 2019
2019 budget
33. Innovation, fair transition and sustainable growth in coal and carbon intensive
regions in the context of the clean energy transition (technical assistance)190
EU decarbonisation objectives and international competition result in accelerated structural

change in regions which depend on coal mining and carbon intensive industries. The clean
energy transition is likely to have profound social and economic impacts on selected regions.
As part of the Clean Energy Package, the Commission committed to assist coal and carbon
intensive regions in order to ensure that any negative effects from the economic and energy
transition on these regions can be mitigated. Such action would allow the EU to reinforce the
support for climate policies and the decarbonisation objectives.
The proposed technical assistance will:
 Assist identified coal regions in finalising their strategies and a list of priority projects to
drive the process of structural and technological transformation;
190

 Assist identified coal regions in preparing strategies for the implementation of priority
projects including strategies for financing and funding.
34. Support to the European Innovation Partnership on Smart Cities and Communities
and its Market Place191
This action shall ensure constant and high quality support to the Market Place of the European
Innovation Partnership on Smart Cities and Communities:
 Maintenance and further development of the interactive web site of the above mentioned
Market Place;
 Further development and improvement of the match making dimension of the above
mentioned Market Place (allowing for project and investment focussed matches between
cities, companies and financing entities);
 Providing Programme Management Office services to handle daily logistics,

communications, social network contributions, etc.;
 Individual streamlined support to each Action Cluster in terms of content as well as

logistics;
 Policy analysis and modelling of the Smart Cities context system to allow for sound
decision making with regard to novel solutions, new market designs, business models,
players and policy instruments (this shall provide assessments of the costs and other
impacts of Smart City related policies, policy instruments, including the social,
environmental and economic impacts of policy decisions);
 Regular reports containing meaningful up-to-date figures and information to be used for
marketing the European Innovation Partnership on Smart Cities and Communities
further.
191

35. Innovative assessment of macro-economic impacts of EU energy transition192
The purpose of this action is to support the development and implementation of innovative
approaches in the assessment of the macroeconomic implications of the EU's clean energy
transition. Drawing on most recent improvements in the treatment of finance and innovation
in macroeconomic models used to assess the clean energy transition, this action would aim at
further improving the modelling tools as well as the interpretation of the results that can be
derived from such tools.
Tasks relate, inter alia, to better capture interactions between energy systems, finance,
innovation, and macroeconomic trends, including in a global context, or to put more focus on
the social drivers and implications of the clean energy transition, including at the sub-national
level and in specific sectors of the economy. Attention would notably need to be paid on the
drivers or necessary conditions to secure a successful clean energy transition. All model
improvements would need to be developed in an open and transparent manner, for them to be
replicable in various macroeconomic models or contexts.
Indicative timetable: as of 3rd quarter 2018
36. Removing barriers to Green Growth by assessment scale and impact of subsidies in
all energy sectors of the EU193
The purpose of this action is to prepare a comprehensive study, looking at both financial and
non financial interventions in energy markets and in other sectors, taking into account energy
production costs and externalities, and to analyse the impact of current interventions on green
investment. Under the State of the Energy Union Report and forthcoming Governance
regulation, the Commission and Member States are meant to review progress in achieving
energy union objectives including stimulating innovation in the energy sector, the
achievement of targets and internal market developments such as the removal of market
distorting government interventions, including fossil fuel subsidies in particular.
Tasks involve, inter alia, a multi-annual study to develop and explore the methodological
issues associated with assessment of energy production, technology and external costs and all
the government interventions, including fossil fuel subsidies that inhibit energy innovation,
including technology innovation and deployment, in the energy markets of the EU. Existing
data are outdated and do not reflect the significant changes in market conditions of certain
192
193

generation technologies, such as falling wholesale energy prices, ongoing subsidies for low
carbon energy and the rise of capacity payments. Thus a new study with a comparable up-to-
date database across all EU countries and generation technologies, with an international
comparative dimension, is necessary. Furthermore, as the scope of the analysis should be
extended to other sectors, such as transport, in order to capture the full impact of fossil fuel
subsidies. Environmentally harmful subsidies, being an obstacle to green investments, are in
the focus of international discussions over the last few years. Therefore, besides collection
data on subsidies, production costs and externalities, we need to analyse the impact of energy
subsidies to green investments.
37. Extension of METIS gas/electricity markets and systems model 194
The purpose of this action is to further support the European Commission's energy policy
proposals by enhancing the EU's modelling capacity. To study recent trends in energy
markets, the Commission has been developing a new mathematical model, METIS, to
perform analyses of the European energy system for electricity, gas and heat. It simulates the
operation of energy systems and markets on an hourly basis over a year, while also factoring
in uncertainties like weather variations. For example, it can analyse the hour-by-hour impact
of using more renewable electricity.
In order to further extend and enhance METIS' capabilities, additional activities in the area of,
inter alia, data gathering, modelling of interactions between gas, electricity and heat markets,
and considerations on optimal capacity expansion are envisaged. In addition, dissemination
activities of METIS model and results towards interested stakeholders should also be
envisaged.
Indicative timetable: as of 2nd quarter 2019
194

38. 2020 Renewable energy progress report195
The Renewable Energy Directive requires the Commission, on biennial basis and drawing on
the Member State national renewable energy reports, to present a comprehensive assessment
of EU and Member State progress towards 2020 renewable energy targets. These reports shall
include analysis of data and description of renewable energy policy measures in Member
States, based on national renewable energy reports, and the data and impacts of the EU
renewable energy policy and biofuel consumption in the EU and in main third countries of
supply.
39. Support to the realisation of Implementation Plans of the SET Plan196
The tenders will support the execution/realisation of the Implementation Plans prepared by
one of the following three SET Plan Temporary Working Groups (TWGs): energy efficiency
solutions for buildings/Renewable heating and cooling; Industry less energy intensive and
more competitive, and Batteries for e-mobility and stationary storage, including the
monitoring of their progress and the disseminating of results. The scope shall include:
supporting further development of the activities identified in the Implementation Plan into
projects with defined partnership and funding plan (at private, National and EU levels);
monitoring the projects progress, results and contribution to the targets defined in the
Declaration of Intent; enhancing the sharing of information on relevant ongoing projects at
National and EU levels, as well as the sharing of experiences of bilateral/multilateral
cooperation between countries in order to foster more cooperation; dissemination to
communicate the achievements of the SET Plan action.
The support for the Implementation Plan on energy efficiency solutions for
buildings/Renewable heating and cooling will also expand to the activities carried out within
the Innovation Challenge N°7 of Mission Innovation.
The support for the Implementation Plan on Batteries for e-mobility and stationary storage
will also:
 Include a link to the Batteries initiatives;
195
196

 Streamline conclusions from stationary energy storage projects (including battery-based

projects), especially as regards system integration, with a view to foster relevant policy
action and identify research gaps;
 Help with identification/streamlining of accompanying non-R&D&I actions, necessary

for uptake of battery-based storage and relevant R&D&I;
 Organise networking activities to foster knowledge sharing.
The Implementation Plans in the areas of solar thermal energy, offshore wind, photovoltaics,
ocean energy, deep geothermal systems, carbon capture and storage, and bioenergy are
supported under the topic LC-SC3-JA-2-2018-2019. Support for the Implementation Plan on
Smart Cities (Action 3.2) is foreseen through the procurement ''Support to the European
Innovation Partnership on Smart Cities and Communities and its Market Place'' (included in
the work programme 2016-2017 of the Horizon 2020 Energy Challenge). Support for the
Implementation Plan on Energy Systems (Action 4) will be provided through the ongoing
project Intensys4EU197.
Type of Action: Public Procurement - 3 direct service contracts.
40. Information, dissemination and logistic support for EU in Mission Innovation198
The European Commission, on behalf of the European Union, joined the Mission Innovation
(MI) in June 2016. MI is a global initiative that aims to reinvigorate and accelerate public and
private global clean energy innovation to make clean energy widely affordable and it is one of
the key strategic forum for the EU's international cooperation in clean energy RD&D. MI
members committed to share information on their clean energy RD&D activities, double their
governmental clean energy investments within 5 years, and encourage greater levels of private
sector investments.
To guarantee continuation of MI initiative, and maintain the ownership of the activities the
EC, on behalf of the EU, is actively engaged in and another set of activities it leads, a series of
supporting services need to be covered, mainly the websites, information and dissemination
activities and logistic support, etc.
Type of Action: Public Procurement - up to 6 direct service contracts and specific contracts
under existing framework contract
Indicative timetable: 1st quarter of 2018, 2019 and 2020
197
https://www.etip-snet.eu/intensys4eu/
198

41. Website for directing potential innovators to the most appropriate public funding
instruments available to support clean energy projects199
This action will provide the European Commission with an internet-based navigator guiding
promoters of clean energy innovation projects, in a few steps, to the most relevant EU funding
and financing instruments that could support the clean energy technology or service they seek
to be assisted financially. The navigator should cover all public and joint public-private
funding instruments, including those providing grants, equity, equity-type or loans, provided
by the European Union. The tool should be designed with the possibility of covering relevant
funding instruments provided at EU Member States level.
Type of Action: Public Procurement - 1 service contract (preferably through an existing

Framework Contract)
42. Provision of technical assistance and study to support the development of a

composite indicator to track clean-energy innovation performance of EU members 200
Provision of technical assistance and/or studies to develop the methodology for a composite
indicator to track clean-energy innovation performance of EU members and related analysis.
These activities, aimed at supporting the governance of the 5th pillar of the Energy Union,
will build on work carried out on and know how gained by DG RTD with the European
Innovation Scoreboard and by JRC with the monitoring of progress in Research and
Innovation in the frame of the annual State of the Energy union reports and the Strategic
Energy Technology Plan (SET-Plan).
Type of Action: Public Procurement - 1 service contract (preferably through an existing

Framework Contract)
199
200

43. Technical and legal assistance to facilitate regional cooperation on deploying

renewable energies among EU Member States201
Regional cooperation on deploying renewable energy can bring substantial benefits in terms
the cost-effectiveness of RES deployment across Europe and can help to increase market and
system integration of renewable energy.
Technical and legal assistance for regional cooperation will be needed to complement and
prepare actions based on the Commission's proposal for a recast of the Renewable Energy
Directive from 30 November 2016 and the developments within the subsequent co-decision
procedure. In particular, Art. 3 (3)202 and Art. 5, 8-12, emphasize the importance to enhance
regional cooperation in the field of RES.
The following actions are needed:
 Developing a coordination tool for auctions of renewable energies, including gathering

and disseminating data on (planned) auctions;
 Maintenance and development of internet database with renewable energies support

schemes and related information;
 Technical assistance for the development of a platform for statistical transfers of

renewable energy between Member States under Art. 8 of the recast of the Renewable
Energy Directive;
 Technical assistance for developing a platform for national plans to support renewable
energy (including indicative timing, capacity and budget) under (Art. 15 (3)) of the
recast of the Renewable Energy Directive;
 Technical assistance to support regional cooperation on renewable energy High Level

Groups (North Seas, BEMIP, CESEC).
Type of Action: Public Procurement - 2 direct service contracts in 2018, 1 direct services
contract in 2019, and 1 direct service contract in 2020
Indicative timetable: 3rd quarter 2018, 1st quarter 2019, 1st quarter 2020
201
202
Compare General Approach in the Council (from 18 December 2017) the Report of the European Parliament
(voted on 17 January 2018).

44. Support for the creation of a multi-disciplinary innovations analysis for the energy
transition203
The creation of a multi-disciplinary centre of expertise on innovations that are relevant for the
energy transition, and that identifies and analyses technology and innovation in the energy
sector and in other relevant domains (e.g. digital, mobility, industry, circular economy) to
make recommendations to the European Commission on policy responses, in the form of
priorities for Research and Innovation, but also in terms of regulatory action as well as
engagement with key (existing and new) stakeholders. Work would be organised based on
proposals for topics or issues by the contractor, to be agreed to and elaborated in cooperation
with the European Commission.
Type of Action: Public Procurement - 1 service contract
Provision of technical/scientific services by the Joint Research Centre
1. Administrative arrangement with the JRC, to provide Technical assistance on GHG

emission saving criteria for biofuels and biomass fuels204
Renewable Energy Directive, Articles 17 – 10 and Annex V, Recast of the RES Directive,
Articles 26 - 28, Annexes V and VI
The JRC technical and scientific support is needed for the implementation of EU Renewable
energy policy and the tasks allocated to the Commission under the Renewable Energy
Directive 2009/28/EU, particularly as regards the requirements regarding the greenhouse gas
emissions of biofuels and bioliquids and other related provisions for biofuels and bioliquids.
The JRC support is also required for the development of the legislative framework following
the adoption of the Commission's legislative proposal for the Recast of the Renewable Energy
Directive which contains proposal for greenhouse gas emission criteria and provisions for
their implementation for liquid, gaseous and solid fuels from biomass.
Type of Action: Provision of technical/scientific services by the Joint Research Centre
Indicative timetable: 1st quarter of 2018, 2019, and 2020
203
204

Delegation Agreements
1. ELENA (European Local Energy Assistance)205
The ELENA (European Local Energy Assistance) facility was established in 2009 under the
Intelligent Energy-Europe Programme II and continued under the H2020 Work Programme
2014-2015 and Work Programme 2016-2017.
The ELENA facility aims at supporting public and private project promoters to prepare and
develop ambitious and large-scale (normally above EUR 30 million) aggregated investment
programmes which will contribute to achieving and going beyond the objectives of the EU
energy and climate policy. The ELENA facility aims at mobilising local, regional and national
stakeholders towards actions leading to broader utilisation and market uptake of innovative
solutions, including technologies, processes, products, policies, organisational models and
practices. The objective is also to accelerate investments by increasing experience, facilitating
financing, in particular through the aggregation of projects and overcoming existing
investment barriers.
In the public sector, the ELENA facility should continue helping cities (such as local
authorities) to mobilise investments and implement their sustainable energy action plans,
where relevant in synergies with other sustainable development plans (Sustainable Urban
Mobility Plans and Air Quality Plans). The ELENA facility can provide, directly or indirectly,
assistance to different type of project promoters such as e.g. local, regional or national
authorities, social housing operators, public/private infrastructure operators, building owners.
The implementation of the ELENA facility is subject to dedicated delegation agreements

between the European Investment Bank (EIB) and the European Commission. The EIB
ensures that Project Development Services are being awarded in accordance with the
principles of transparency, proportionality, sound financial management, equal treatment and
non-discrimination, lack of conflict of interests and compliance with internationally accepted
standards. Eligible projects are selected by the EIB and submitted to the European
Commission for approval. The selection of projects shall take into consideration:
 the eligibility of the applicant;
 the eligibility and potential bankability of the proposed investment programme;
 the financial and technical capacity of the applicant to implement and complete the
Investment Programme;
 the technical need for the project development services;
 the contribution to the broader utilisation and market uptake of innovative solutions
including technologies, processes, products, policies, organisational models or practices;
205
policies and supporting various groups of stakeholders is excluded from the delegation to the Executive
Agencies and will be implemented by the Commission services.

 the expected Leverage Factor (the cost of the Investment Programme divided by the
amount of the ELENA contribution)
 the contribution to EU policies and the EU added value.
The project development services grants are provided in relation to all the activities necessary
to develop and mobilise finance for a clearly identified investment programme, including for
instance: feasibility studies, design studies, structuring of programmes, business plans, energy
audits, legal/financial advisory, preparation of tendering procedures and contractual
arrangements, bundling of smaller projects to form bankable packages, set-up and running of
a project implementation unit. However, costs related to the investment programme itself such
as hardware costs are not eligible. The Request for Project Development Services shall be
addressed to the EIB according to the standard procedure for the submission of projects to the
EIB. Applications are open to all participating countries following the CSA eligibility
conditions and are not restricted by the availability of local offices of the EIB in a specific
country.
In 2018, 2019 and 2020, the ELENA Facility will aim at supporting ambitious and significant
investment programmes in one or both of the following two pillars (1) and (2):
(1) energy efficiency and distributed renewable energy. Investment programmes could cover
one or more of the following areas:
 investments to significantly increase the energy performance of public or private

buildings, including measures to decrease energy consumption in heating/cooling and
electricity – e.g. thermal insulation, energy efficient heating, air conditioning and
ventilation systems, efficient lighting, and measures for the integration of renewable
energy sources into the built environment – e.g. solar photovoltaic (PV), solar thermal
collectors and biomass. These investment programmes could correspond to the
deployment of dedicated financial instruments and investment platforms aiming at e.g.
accelerating energy renovations, as promoted under the "Smart Finance for Smart
Building" Initiative206.
 investments into renovating, extending or building new district heating/cooling

networks, including networks based on combined heat and power (CHP); decentralised
CHP systems (building or neighbourhood level);
 investments in energy efficient local infrastructures, including energy efficient street and
traffic lighting, smart grids leading to energy efficiency improvements, measures to
improve the energy efficiency of water infrastructures (water pumping, water treatment
etc.), information and communication technology infrastructure for energy efficiency,
energy-efficient urban equipment and link with transport.
Following areas shall be excluded:
206
https://ec.europa.eu/energy/sites/ener/files/documents/1_en_annexe_autre_acte_part1_v9.pdf

 Stand-alone renewable energy systems, not integrated in buildings or heating/cooling

networks, e.g. wind turbines; stand-alone PV, concentrated solar power; hydropower and
geothermal electricity production;
 Large industrial facilities (falling under the Emission Trading Scheme Directive), and
investments in reducing greenhouse gas emissions due to industry delocalisation.
(2) Urban transport and mobility in urban/suburban agglomerations and other densely
populated areas:
A part of the ELENA budget will be ring-fenced for the development of investment
programmes (often with public sector involvement) in the field of urban transport that will
contribute to the EU urban transport policy goals of halving the use of 'conventionally-fuelled'
cars in cities by 2030, achieving essentially CO2 free logistics in major urban centres by 2030
and attaining the 2020 objectives for urban areas presented in the Directive on the deployment
of alternative fuels infrastructure.
Projects could cover one or more of the following areas:
 Investments to support the use and the integration of innovative solutions (beyond the
current state of the art) for alternative fuels207 in urban mobility, e.g. in vehicles and in
refuelling infrastructure for alternative fuel vehicles and other actions to support the
wide-scale use of 'alternative fuels' in urban areas.
 Investments to introduce - at a wide scale, system level - new, more energy-efficient

transport and mobility measures in any modes in urban areas., e.g. in shared mobility,
urban logistics, intelligent transport systems, planning, urban infrastructure (including
investments in 'soft modes').
The preparation of a Sustainable Mobility Plan (SUMP) could be one of deliverables of an

ELENA funded project, and/or the ELENA-planned investments could contribute to the
implementation of an existing or updated SUMP.
Projects dealing with long-distance transport infrastructure are not eligible for financing by
the ELENA Facility.
Type of Action: Delegation Agreement
Indicative timetable: 4th quarter 2018, 4th quarter 2019 and 4th quarter 2020
Indicative budget: EUR 54.80 million from the 2018 budget208 and EUR 35.00 million from
the 2019 budget209 and EUR 35.00 million from the 2020 budget210
207
See the Communication on 'Clean Power for Transport: A European alternative fuels strategy' (COM/2013/017)
208
209
210

Specific Grant Agreements
1. Technical support to stakeholders on standardisation work for energy related

products211
To give support to environmental NGOs for participating in Technical Committees and

Working Groups on Standardisation.
Beneficiary: ECOS, rue d'Edimbourg 26, Brussels 1050, Belgium
ToA text: Three Specific Grant Agreements under Framework Partnership Agreement
1338/G/ENV/ENTR/2014 with the identified beneficiary ECOS for Coordination and Support
Actions.
rate of co-financing for this type of action are provided in General Annexes D and H or the
work programme.
Type of Action: Specific Grant Agreement
Indicative timetable: 2nd quarter 2018, 2nd quarter 2019 and 2nd quarter 2020
2. Support to European Standardisation Organisations on standardisation work for

energy related products212
Identified beneficiaries:
CEN – European Committee for Standardisation, Avenue Marnix 17, 1000 Brussels Belgium
According to Regulation (EU) No 1025/2012, CEN and CENELEC are the competent
European standardisation organisations to carry out this work and are therefore the identified
beneficiaries.
ToA text: Three Specific Grant Agreements under the Framework Partnership Agreement
FPA/CEN/ with the identified beneficiary for Coordination and Support Actions
rate of co-financing for this type of action are provided in General Annexes D and H or the
work programme.
211
212

Indicative timetable: 2nd quarter 2018, 2nd quarter 2019 and 2nd quarter 2020
3. Standardisation request to the CEN for algae and algae-based products in support of
the implementation of the RED II Proposal213
CEN/BT/WG 218 worked on the Commission's Standardization Request M/547 for algae and
algae-based products or intermediates under contract CEN/2016-04/ENER/C2/498-2016 -
SI2.735225 and developed the Work Programme for Mandate M/547. The Work Programme
has been approved by CEN/BT and by the Commission. The additional budget request is to
cover for additional work not foreseen in the original Standardization Request M/547 but
identified by CEN/BT/WG 218. CEN is in the process of establishing a new Technical
Committee CEN/TC XX 'Algae' to implement the Work Programme.
Indentified beneficiary: CEN – European Committee for Standardisation, Avenue Marnix 17,
1000 Brussels Belgium
4. Support to European Standardisation Organisations for biomethane injection in the

grid in support of the implementation of the RED II Proposal214
CEN/TC 408 worked on the Commission's Standardization Request M/475 on standards for
biomethane use in transport and injection in natural gas pipelines under contract
SA/CEN/ENTR/EFTA/475/2012-15 and the standardisation work has progressed well.
However the work identified important topics for which research has to be continued in order
to provide certainty for the specification and in particular:
a. Impact of siloxanes on heavy duty engines
b. Impact of Sulphur on catalytic converters and performance of engines
c. Impact of oxygen on underground storages
d. Impact of components on health

213
214

Identified beneficiaries: CEN – European Committee for Standardisation, Avenue Marnix 17,
Indicative timetable: 2nd quarter 2019 and 2nd quarter 2020
2020 budget
5. Support to European Standardisation Organisations for Ethanol 20/25 blends in

petrol in support of the implementation of the RED II 215
Under the Framework Partnership Agreement FPA/CEN/ENTR/2014/C(2014)1892,

CEN/TC/19 has been carrying out studies for the European Commission on ethanol 20/25
blends with petrol under contracts:
a. ENER/C2/GA/449-2012/SI2.641582
b. ENER/C2/GA/449-2012/SI2.674184
c. SA/CEN/RESEARCH/EFTA/000/2014-13
The results from the first two contracts have been positive while the third one is still ongoing.
However, preliminary results are encouraging and it is expected that the Commission, in
consultation with CEN and the stakeholders, will consider a standardisation request to CEN
on standards for E20/25 ethanol blends in petrol.
Identified beneficiaries: CEN – European Committee for Standardisation, Avenue Marnix 17,
6. Support to European Standardisation Organisations for petrol/ethanol blends in

diesel in support of the implementation of the RED II Proposal216
Under contract SA/CEN/RESEARCH/EFTA/000/2014-13 CEN of the Framework

Partnership Agreement FPA/CEN/ENTR/2014/C(2014)1892; in close collaboration with
ACEA and CONCAWE; CEN is carrying out investigative research work on blends of petrol
215
216

and/or petrol/ethanol in diesel in view of minimising diesel consumption and increased

consumption of petrol/ethanol in the EU. It is expected that further research work will be
necessary to ascertain the consideration of an eventual standardisation request by the
European Commission.
Identified beneficiary: CEN – European Committee for Standardisation, Avenue Marnix 17,
Financial Instruments
1. Support to first-of-a-kind renewable energy projects217
Meeting the EU energy goals for 2030 and beyond will require continuous development and
commercialisation of new generations of low-carbon technologies. First-of-a-kind
commercial-scale demonstration (FOAK) projects are essential to roll-out new generations of
innovative renewable energy technologies to the market.
The InnovFin Energy Demo Projects 218 (EDP) Facility contributes to bridging the gap
between technology demonstration and market entry by supporting the demonstration of the
technical feasibility and commercial viability of such innovative FOAK projects, thereby
reducing perceived investment risks for private investors. Successful first-of-a-kind
demonstration and validation at commercial scale of technology performance, installation
time, reliability and lifetime of energy technologies, are expected to facilitate their subsequent
market roll-out after 2-4 years of operation.
Support is delivered to these high-TRL (please see part G of the General Annexes) projects
via European Investment Bank (EIB) loans or via guarantees extended to financial
intermediaries making such loans. Demand has proven strong, and the European Commission
has decided to double the financial support to this facility from EUR 150 million to EUR 300
million (with EUR 250 million channelled from Horizon 2020 Access to Risk Finance and
EUR 50 million from the 2016 budget of this Societal Challenge). In addition, the scope of
EDP has been enlarged to cover the whole SET-Plan priorities with the exception of energy
and nuclear safety. This includes, but is not limited to renewable energy technologies; Smart
energy systems, including smart grids; Energy storage, including batteries for both e-mobility
and stationary storage; and Carbon capture and storage and use (CCS/U). Projects or
investments enhancing the competiveness of manufacturing processes for innovative
technologies may be considered in the light of the SET Plan strategic targets. Eligible costs
217
policies and supporting various groups of stakeholders is excluded from the delegation to the Executive
Agencies and will be implemented by the Commission services.
218
http://www.eib.org/products/blending/innovfin/products/energy-demo-projects.htm

include all the costs necessary for the successful demonstration of the technology, service,
manufacture or business process.
Type of Action: Financial Instrument
Indicative timetable: as of 1 quarter 2019 and 2020
2020 budget
Subscriptions
1. Annual subscription to the International Partnership for Energy Efficiency

Cooperation (IPEEC)219
The purpose of the International Partnership for Energy Efficiency Cooperation (IPEEC) is to
strengthen international cooperation on energy efficiency. The action carried out under the
auspices of the Partnership should result in more effective energy policy and programme
output, in best practices being more widely known, disseminated and applied and in
economies of scale. The aim of the Partnership is to offer a topic-driven, structured dialogue
and an operational network for enhanced cooperation and exchanges on energy efficiency
between countries and international organisations by:
 exchanging information and experience on development of regulatory measures, policies

and programmes;
 developing benchmarks and sharing information on goods and services, along with
measurement methods regarding energy performance and energy savings;
 strengthening information, education and training for energy consumers;
 building stakeholder capacity by improving contacts between national, regional and local
authorities and other relevant partners and stakeholders, exchanging views and sharing
knowledge and experience.
On 30 November 2009 the Council adopted a Decision on the signing and conclusion of the
Terms of Reference for the IPEEC and the Memorandum concerning the hosting by the
International Energy Agency of the Secretariat of the International Partnership for Energy
Efficiency Cooperation by the European Community. The Council endorsed the Commission
proposal that, from the second year of membership (i.e. 2012), the European Union will
voluntarily contribute for each subsequent year.
Type of Action: Subscription
Indicative timetable: From 3rd quarter of 2018 onwards
219

2. Contribution to Technology Collaboration Programmes (TCPs) of the International

Energy Agency (IEA)220
The Commission represents the European Union in the Technology Collaboration

Programmes (TCPs) concluded under the framework of the International Energy Agency
where it participates in activities in certain areas of energy research. The annual financial
contributions will be paid to the entities responsible for managing the following TCPs:
 Geothermal;
 Bioenergy;
 Ocean Energy Systems;
 Smart Grids (ISGAN);
 Greenhouse Gas R&D;
 Concentrated Solar Power;
 Photovoltaic Power Systems;
 Solar Heating and Cooling;
 Clean Coal Centre;
 Wind Energy Systems;
 Renewable Energy Technology Deployment;
 Hydropower;
 Gas and Oil Technologies;
 Energy Efficient End-Use Equipment (4E);
 Clean Energy Education and Empowerment (C3E).
Indicative timetable: as of 1st quarter 2018, as of 1st quarter 2019, and as of 1st quarter 2020
220

3. Contribution to the International Renewable Energy Agency (IRENA)221
The European Union is a member of IRENA. According to the organisation's Statute and
Financial Regulation this implies the obligation to pay an annual contribution to its budget
covering the participation of the EU in IRENA's activities. IRENA's main objective is to
disseminate best practices in the field of renewables as the principal platform for international
cooperation in the field, a centre of excellence on renewable energy and a repository of
policy, technology, resource and financial knowledge. This includes:
 The promotion of the widespread and increased adoption and the sustainable use of all
forms of renewable energy globally, including in the EU, in particular to bring down
costs and also to increase market experience, in order to contribute to economic growth
and social cohesion as well as access to and security of energy supply
 Support activities for countries in their transition to a renewable energy future
 Reducing of barriers for renewable energy, stimulating best practice and raising
awareness.
Indicative timetable: as of 1st quarter 2018, as of 1st quarter 2019, and as of 1st quarter 2020
4. Contribution to the Secretariat of the Clean Energy Ministerial (CEM)222
While the Commission has been active in the Clean Energy Ministerial (CEM) since its
inception in 2010, the European Union formally became a member on 6 June 2016 when the
EU Energy Ministers formally endorsed the CEM Framework Document. This Framework
Document is a combination of political commitment and more detailed procedural
arrangements of the co-operation, but does not create any legal or financial obligations under
domestic or international law.
The CEM Framework Document establishes a multilateral CEM Secretariat to facilitate the
long term engagement of all CEM Members in the work of the CEM. This is hosted at the
International Energy Agency (IEA) under an "Administrative Arrangement" between the IEA
and CEM Members. In order to provide "adequate and predictable financial resources" for the
CEM Secretariat, CEM Members are encouraged to provide voluntary contributions on an
annual or multi-annual basis.
221
222

The CEM consists of a small group of countries 223 that, together with the European
Commission on behalf of the EU, are aiming to accelerate the global clean energy transition.
Together they have the potential for making a major impact as they represent about 90% of
global clean energy investment and 75% of global greenhouse gas emissions.
The CEM is focused on three global climate and energy policy goals, namely:
 Improve energy efficiency worldwide;
 Enhance clean energy supply;
 Expand clean energy access.
Indicative timetable: As of 1st quarter 2018 and as of 1st quarter 2019
2019 budget
Expert contracts
1. External expertise
This action will support the use of appointed independent experts for the monitoring of
actions (grant agreements, grant decisions, procurements, financial instruments).
Type of Action: Expert Contracts
Indicative timetable: As of 1st quarter 2018, 1st quarter 2019 and 1st quarter 2020
223
Australia, Brazil, Canada, China, Denmark, Finland, France, Germany, India, Indonesia, Italy, Japan, Mexico,
Norway, Russia, Saudi Arabia, South Africa, South Korea, Spain, Sweden, the United Arab Emirates, the United
Kingdom, and the United States) and the European Commiss

CALLS AND OTHER ACTIONS for 2020224

Indicative topics for 2020
 Energy efficiency
 Energy efficient industry and services: LC-SC3-EE-7-2020: Increasing energy

efficiency of small data centres;
 Energy efficiency is an investment: LC-SC3-EE-12-2020: Innovation procurement

for energy efficiency;
 Global leadership in renewables
 Next Renewable energy solutions: LC-SC3-RES-3-2020: International Cooperation

with USA on alternative renewable fuels for energy and transport;
 Renewable energy solutions for implementation at consumer scale:
 LC-SC3-RES-9-2020: Next generation of thin-film photovoltaic technologies;
 LC-SC3-RES-10-2020: Pre-Commercial Procurement for a 100% Renewable

Energy Supply;
 Renewable energy solutions for energy system level implementation:
 LC-SC3-RES-18-2020: Demonstration of the solutions based on renewable

sources that provide flexibility to the energy system;
 LC-SC3-RES-19-2020: Demonstration of floating wind farms;
 LC-SC3-RES-20-2020: Efficient combination of concentrated solar power

(CSP) and desalination (with particular focus on the Gulf Cooperation Council
(GCC) region);
 Renewable Fuels for transport:

LC-SC3-RES-25-2020: International cooperation for Research and Innovation
on advanced biofuels and alternative renewable fuels;

LC-SC3-RES-26-2020: Development of next generation biofuel and
alternative renewable fuel technologies from CO2 and renewable energy
(Power and Energy to Fuels);
224
The budget amounts for the 2020 budget are indicative and will be subject to a separate financing decision to


LC-SC3-RES-27-2020: Demonstration of advanced biofuels production from
aquatic biomass;
 Smart and clean energy for consumers: LC-SC3-EC-3-2020: Consumer engagement and
demand response;
 Enabling near-zero CO2 emissions from fossil fuel power plants and carbon intensive
industries: LC-SC3-NZE-6-2020: Geological Storage Pilots.
Other Actions for 2020
1. Monitoring and assessment of the performance indicators of renewable energy,

investment and RES market trends in Europe
Type of Action: Public Procurement - null
2. Study on the impact of projects funded under the Horizon 2020 Energy Challenge
3. Continuation of the Building Stock Observatory and production of relevant bottom-

up statistical data on buildings225
4. Support facility for public authorities
225

5. Energy system modelling
6. Support to R&I Strategy and feedback to policy in the field of electricity networks
and local energy systems226
7. Smart Cities and Communities information system
8. Research oriented data sets and open access database227
9. Operation, maintenance, improvement and promotion of the BUILD UP interactive

web portal
226
227
These activities directly aimed at supporting the development and implementation of evidence base for R&I

10. Studies on the EU energy system in support of policy
11. Concerted Action supporting the transposition and implementation of the recast
Renewables Directive
12. Concerted Action on the Energy Efficiency Directive support to Member States and
participating countries for the implementation of the EED
The action will be implemented by an identified beneficiary(ies) in accordance with Art.

190(1)(e) RAP and Art. 11(2) H2020 Rules for Participation.
Annexes.
13. Administrative arrangement with the JRC, to implement the relevant provisions of
Energy Efficiency related Directives or Regulations, including Directive 2012/27/EU and
the EPBD228
14. Technical and scientific assistance to the Covenant of Mayor by JRC
228
These activities directly aimed at supporting the development and implementation of evidence base for R&I

Budget229
Budget 0 2018 2019 2020

line(s) Budget (EU Budget (EU Budget (EU Budget (EU
R million) R million) R million) R million)
Calls
H2020-LC-SC3- 534.30230 620.65231 642.81

2018-2019-2020
from 326.00 302.00 321.92
08.02030
3
from 208.30 318.65 320.89

32.04030
1
Contribution 13.65 13.65 13.65

from this part to
from 6.87 6.87 6.87
call H2020-EIC-
08.02030
FTI-2018-2020
3
under Part 17 of
the work from 6.78 6.78 6.78
programme 32.04030
1
Contribution 44.00 30.00

from this part to
from 44.00 30.00
call H2020-LC-
08.02030
BAT-2019-2020
3
under Part 20 of
the work
programme
229
The budget figures given in this table are rounded to two decimal places.
230
To which EUR 3.00 million from the 'Smart, green and integrated transport' WP part will be added making a
total of EUR 537.30 million for this call.
231
total of EUR 623.65 million for this call.

from this part to from 15.00 15.00

call H2020-DT- 32.04030
2018-2020 under 1
Part 5.i of the
work programme

from this part to
from 5.00 15.00
call H2020-SU-
DS-2018-2019- 32.04030
1
2020 under Part
14 of the work
programme
Other actions
Prize 3.25 1.70
from 3.25 1.70

08.02030
3
Grant to 16.10 3.25 11.50

Identified
from 4.50 0.25
beneficiary
08.02030
3
from 11.60 3.00 11.50

32.04030
1
Public 35.63 36.94 31.98

Procurement
from 30.40 33.15 31.15
32.04030
1
from 5.23 3.79 0.83

08.02030
3
Provision of 0.25 0.25 4.70

technical/scientif
from 0.25 0.25 4.70
ic services by the
32.04030
Joint Research
1
Centre

Delegation 49.80232 30.00233 30.00234

Agreement
from 49.80 30.00 30.00
32.04030
1
Specific Grant 0.60 6.30 3.80

Agreement
from 0.60 6.30 3.80
32.04030
1
Financial 50.00 50.00

Instrument
from 50.00 50.00
08.02030
3
Subscription 1.29 1.79 1.09
from 1.06 1.56 0.86

32.04030
1
from 0.23 0.23 0.23

08.02030
3
Expert Contracts 1.00 0.95 0.89
from 0.25 0.30 0.25

08.02030
3
from 0.75 0.65 0.64

32.04030
1
Estimated total budget 672.62 826.03 837.13
232
total of EUR 54.80 million for these actions.
233
234

h2020 wp1820 Energy - en PDF

Uploaded by

Copyright:

Available Formats

h2020 wp1820 Energy - en PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

h2020 wp1820 Energy - en PDF

Uploaded by

Copyright:

Available Formats

EN

Work Programme 2018-2020

10. Secure, clean and efficient energy

IMPORTANT NOTICE ON THIS WORK PROGRAMME

(European Commission Decision C(2018)4708 of 24 July 2018)

Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT FUTURE:

Energy efficiency .................................................................................................................... 14

Global leadership in renewables ........................................................................................... 52

Part 10 - Page 2 of 213

Next Renewable energy solutions ........................................................................................ 54

Smart and clean energy for consumers ................................................................................ 78

Part 10 - Page 3 of 213

LC-SC3-EC-1-2018-2019-2020: The role of consumers in changing the market through

Smart citizen-centred energy system .................................................................................... 83

Smart Cities and Communities ........................................................................................... 105

Joint Actions ......................................................................................................................... 115

Part 10 - Page 4 of 213

Cross-cutting issues .............................................................................................................. 123

Conditions for the Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT

NEXT-GENERATION BATTERIES ........................................................... 146

TRANSFORMING THE ENERGY SECTOR THROUGH

Other actions .................................................................................................... 149

Horizon Prizes ...................................................................................................................... 149

Grants to identified beneficiaries ........................................................................................ 152

Part 10 - Page 5 of 213

Public procurements ............................................................................................................ 170

Part 10 - Page 6 of 213

Provision of technical/scientific services by the Joint Research Centre .......................... 195

Delegation Agreements ........................................................................................................ 196

Specific Grant Agreements .................................................................................................. 199

Part 10 - Page 7 of 213

1. Technical support to stakeholders on standardisation work for energy related products

Financial Instruments .......................................................................................................... 202

Expert contracts ................................................................................................................... 206

CALLS AND OTHER ACTIONS for 2020 .................................................. 207

Indicative topics for 2020 ..................................................................................................... 207

Other Actions for 2020 ......................................................................................................... 208

Part 10 - Page 8 of 213

10. Studies on the EU energy system in support of policy ................................................ 210

Budget ............................................................................................................... 211

Part 10 - Page 9 of 213

Part 10 - Page 10 of 213

Efforts to secure Europe's technological leadership must be complemented by substantial

The transformation of the energy system encompasses technological, societal, cultural,

Part 10 - Page 11 of 213

resilient future: Next-generation Batteries" (call identifier H2020-LC-BAT-2019-2020) which

Open research data

Part 10 - Page 12 of 213

Contribution to focus area(s)

Part 10 - Page 13 of 213

Call - BUILDING A LOW-CARBON, CLIMATE RESILIENT FUTURE:

 a better understanding of the specific socio-economic contexts in which the energy

 increased market-uptake of innovations, including the implementation of energy policy,

Part 10 - Page 14 of 213

Upgrading buildings' energy performance and smartness

Proposals are invited against the following topic(s):

Part 10 - Page 15 of 213

LC-SC3-EE-1-2018-2019-2020: Decarbonisation of the EU building stock: innovative

Part 10 - Page 16 of 213