1206A-E70TTAG2

226.1 kWm (Gross) @ 1500 rpm

240 kWm (Gross) @ 1800 rpm
Series
ElectropaK
Basic technical data Performance
Number of cylinders .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ..6 Cyclic irregularity for engine standby power
Cylinder arrangement.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . Vertical, inline At 110%.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .. 0.11
Cycle.. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .4 stroke DI Ratings
Induction system.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .. TTA Steady state speed stability at constant load.. .. ... .. ... .. ... .. .. ± 0.25 %
Compression ratio .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .15.8:1 Average sound pressure level for bare engine
Bore .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 105 mm (without inlet and exhaust) at 1 metre.. .. .. . .. .. . .. .. . .. .. . 113db/1500(A)
Stroke .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . 135 mm Average sound pressure level for bare engine
(without inlet and exhaust) at 1 metre.. .. .. . .. .. . .. .. . .. .. . 117db/1800(A)
Displacement.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 7.01 litres
Direction of rotation when viewed from flywheel.. .. ... .. ... Anticlockwise Notes: 
Firing order .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .1, 5, 3, 6, 2, 4 • all data based on operation to ISO 3046/1:2002 standard
reference conditions.
Estimated total weight including radiator support brackets
Dry .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 797 kg • for engines operating in ambient conditions other than the
standard reference conditions stated below, a suitable derate must
Wet.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 832 kg be applied

Overall dimensions of ElectropaK • derate tables for increased ambient temperature and/or altitude
are available, please contact Perkins Applications Department.
Height, including radiator support brackets .. .. ... .. ... .. ... .. ... 1426 mm
Length, front of radiator to rear of air cleaner.. .. ... .. ... .. ... .. . 1878 mm
Test conditions
Width .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 949 mm
Air temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 25°C
Moments of inertia (MK²) Barometric pressure .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . 101 kPa
Engine rotational components .. .. ... .. ... .. ... .. ... .. ... .. ... 0.4269 kgm² Relative humidity.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 10.7 %
Flywheel .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 1.26 kgm² Air inlet restriction at maximum power (nominal).. .. .. . .. .. . .. .. . .. .5 kPa
Exhaust back pressure at maximum power (nominal).. .. ... .. ... . 15 kPa
Centre of gravity
Fuel temperature (inlet pump).. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. . 40 °C
Forward from rear of block.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 476 mm
All ratings certified to within.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . ± 3%
Above centre line of block .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 199 mm

1 of 4
Publication No. TPD2125, March 2018.
Copyright © 2018 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com
General installation
Engine speed @ 1500 rpm Engine speed @ 1800 rpm
Designation Units
Prime (50Hz) Standby (50Hz) Prime (60Hz) Standby (60Hz)

Gross engine power kWb 204.2 226.1 216.6 238.6

Gross BMEP kPa 2330.5 2581.2 2060.2 2269.5

Mean piston speed m/s 6.35 6.77

ElectropaK nett engine power kW 195.2 217.1 201.6 223.6

Engine coolant flow against 35 kPa restriction litres/min 300

Combustion air flow kg/h 823.3 972.3 961.5 1003.9

Combustion air flow m³/min 11.6 13.7 13.5 14.1

Exhaust gas flow (maximum) at atmospheric pressure m³/min 26.58 30.21 28.14 30.82

Exhaust gas temperature (maximum) TC out °C 487.5 491.2 446.9 500.1

Overall thermal efficiency % 40.1 39.2 39.0 38.4

kWe 180 200

Typical Generator sets electrical output (0.8pf 25ºC)
kVA 225 250

Assumed alternator efficiency % 0.92 89.5

Energy balance
Engine speed @ 1500 rpm Engine speed @ 1800 rpm
Designation Units
Prime (50Hz) Standby (50Hz) Prime (60Hz) Standby (60Hz)

Energy in fuel kWt 508.8 577.3 555.9 622.1

Energy in power output (gross) kWb 204.2 226.1 216.6 238.6

Energy to cooling fan kWm 9 15

Energy in power output (nett) kWm 195.2 217.1 201.6 223.6

Energy to exhaust kWt 201.2 238.3 221.7 249.4

Energy to ACC coolant kWt 31.9 44.2 40.2 43.9

Energy to radiator kWt 113.6 120.0 128.8 141.7

2 of 4
Publication No. TPD2125, March 2018.
Copyright © 2018 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com
Cooling system Fuel specification
USA Fed Off Highway.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... ASTM D975
Total coolant capacity Europe Off Highway.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. EN590
ElectropaK (with radiator) .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 25 litres
ElectropaK (without radiator) .. .. ... .. ... .. ... .. ... .. ... .. ... .. .. 13.7 litres Note: F
 or further information on fuel specifications and restrictions,
Maximum top tank temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... 108°C refer to the OMM fuels section for this engine model.
Maximum static pressure head on pump.. .. ... .. ... .. ... .. ... .. ... 70 kPa
Temperature rise across engine.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 8 °C Fuel consumption
Maximum permissible external system resistance .. .. ... .. ... .. ... 35 kPa
Thermostat operation range.. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 82-93°C 204.2kW/1500 rpm Prime
Power rating %
g/kWh litres/hr
Radiator
25 231.1 14.0
Radiator face area .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . ..0.444 m²
Material and number of rows.. .. ... .. ... .. ... .. ... .. ... .. ... Aluminium 57 50 209.6 25.5
Material and fins per inch .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 10 75 208.2 38.0
Width of matrix .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 550 mm 100 209.7 51.0
Height of matrix.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 800 mm
Pressure cap setting .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . 100 kPa 110 211.7 56.6

Fan
Type.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .. Pusher Fan 216.6kW/1800 rpm Prime
Power rating %
Diameter .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . 724 mm g/kWh litres/hr
Number of blades.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... ..7 25 257 16.5
Material.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... Heramid & Steel
50 216.4 27.8
Drive ratio .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ..1.33:1
Airflow at rated speed.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 4.42 m³/min 75 209.3 40.4

Recommended coolant 100 211.7 54.5

Recommended coolant: 50% anti freeze / 50% water. 110 215.2 61.1
For details of recommended coolant specifications, please refer to the
Operation and Maintenance Manual (OMM) for this engine model.
Cold start recommendations
Duct allowance
Minimum battery cold cranking amps
Maximum additional restriction (duct allowance) to cooling airflow and
resultant minimum airflow Air temperature/oil With glow plugs Without glow
viscosity limit 12V AZF and P5 plugs 12V AZF
Ambient clearance Duct allowance
Power m³/sec -5°C 15W40 950 15W40 950
inhibited coolant °C (Pa)
-10°C 15W40 950 15W40 950
230 kVA (50Hz) 55 200 4.42
-15°C 15W40 1650 15W40 (1)

200 kWe (60Hz) 50 200 5.62 -20°C 10W40 1650 10W40 (1)

-25°C 5W30 1900 5W30 (1)

Fuel system Maximum battery CCA 2400 2400

Type of injection .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. Common Rail
Note: Glow plugs needed below -10°C.
Fuel injection pump.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . Denso HP4
Note: For cable sizes see Applications and Installation Manual.
Fuel injector .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... Denso G3S
Nozzle opening pressure .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 5 Mpa 1. Must use glow plugs.
Maximum particle size .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 4 Microns
Fuel lift pump type.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. Brushless Electric
Flow/hour.. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 3.5 Litres/hour @ 200 kPa
Pressure .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .400 kPa
Maximum suction head .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .-30 kPa
Maximum static pressure head.. .. ... .. ... .. ... .. ... .. ... .. ... .. ...500 kPa
Maximum fuel temperature at lift pump inlet.. .. .. . .. .. . .. .. . .. .. . .. . 75 °C
Maximum fuel filter service interval .. .. ... .. ... .. ... .. ... .. ... .. 500 hours
Governor type .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. Electronic ECM
Speed control conforms to.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... N/A

3 of 4
Publication No. TPD2125, March 2018.
Copyright © 2018 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com
Lubrication system Electrical system
Alternator....................................................................100 amps/12 volts
Total system capacity
Starter motor...................................................................... 5 kW/12 volts
Maximum sump capacity............................................................ 16 litres Number of teeth on flywheel..............................................................134
Minimum sump capacity............................................................. 13 litres Number of teeth on starter pinion.........................................................13
Maximum oil temperature (continuous operation)..........................125°C Engine stop method.........................................................................ECM
Maximum oil temperature (intermittent operation).........................135°C

Lubricating oil pressure Engine mounting

Relief valve opens.............................................................. 545-595 kPa Maximum static bending moment at rear face of block.............. 1130 Nm
Minimum oil pressure..................................................................300 kPa
At maximum no-load speed........................................................700 kPa Load acceptance
Oil flow at rated speed.........................................................70 litres/min
The figures below comply with the requirements of classification 3 and 4
Maximum engine operating angles of ISO 8528-12 and G2 operating limits stated in ISO 8528-5.

Front up, front down, right side or left side.......................................... 30° Initial load application: When engine reaches rated speed
(15 seconds maximum after engine starts to crank)
Recommended SAE viscosity 230 kVa
Description Units
A single or multigrade oil conforming to API-CH-4 or ACEA E5 must be used. 60 Hz 50 Hz

Prime power % 67 65
Viscosity grade

15W-40 Load kWm 138 131

10W-40
Frequency recovery Seconds 0.7 0.95
10W-30
5W-40
The figures shown in the table above were obtained under the following
5W-30
test conditions:
0W-40
Engine block temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . 90°C
0W-30 Ambient temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . 25°C
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 Governing mode .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ...0 %
Ambient temperature °C Alternator inertia .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 7 kgm²
Under frequency roll off (UFRO) point set to .. 20 %volt/10 %Frequency
LAM on/off .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. off.
Induction system Note: A ll tests were conducted using an engine installed and serviced
to Perkins Engines Company Limited recommendations.
Maximum air intake restriction of engine
Note: Derate curves for altitude and humidity can be found in
Clean filter.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ...3 kPa Engine Specification Manual.
Dirty filter.........................................................................................8 kPa Note: The general arrangement drawings shown in this data sheet
are for guidance only. The latest versions should be requested
Exhaust system from the Perkins Applications Department.
Exhaust outlet size........................................................................80 mm
Minimum back pressure................................................................25 kPa
Maximum back pressure...............................................................35 kPa

4 of 4
Publication No. TPD2125, March 2018.
Copyright © 2018 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com