Scribd
Upload
778 views

Principles of Data Conversion System Design

This document provides an overview of principles of data conversion system design. It covers topics such as basic sampling circuits, sample-and-hold architectures, principles of digital-to-analog conversion, digital-to-analog converter architectures, analog-to-digital converter architectures, building blocks of data conversion systems, and precision techniques. The document contains 8 chapters that describe various components and design considerations for data conversion systems at both the circuit and architectural levels.

Uploaded by

balodhi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
778 views

Principles of Data Conversion System Design

This document provides an overview of principles of data conversion system design. It covers topics such as basic sampling circuits, sample-and-hold architectures, principles of digital-to-analog conversion, digital-to-analog converter architectures, analog-to-digital converter architectures, building blocks of data conversion systems, and precision techniques. The document contains 8 chapters that describe various components and design considerations for data conversion systems at both the circuit and architectural levels.

Uploaded by

balodhi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Principles of Data

Conversion System Design

Behzad Razavi
AT&T Bell Laboratories

The Institute of Electrical and Electronics Engineers, Inc., New York

>|WILEY-
/INTERSCIENCE
A JOHN WILEY & SONS, INC., PUBLICATION
New York • Chichester • Weinheim • Brisbane • Singapore 'Toronto
Contents

PREFACE xi

CHAPTER 1 INTRODUCTION TO DATA CONVERSION


AND PROCESSING 1

CHAPTER 2 BASIC SAMPLING CIRCUITS 7

2.1 General Considerations 7


2.2 Performance Metrics 11
2.3 Sampling Switches 13
2.3.1 MOS Switches 14
2.3.2 Diode Switches 19
2.3.3 Comparison of MOS and Diode Switches 23
2.3.4 Improvements in MOS Switch Performance 24
References 27

CHAPTER 3 SAMPLE-AND-HOLD ARCHITECTURES 29

3.1 Conventional Open-Loop Architecture 29


3.2 Conventional Closed-Loop Architecture 31
3.3 Open-Loop Architecture with Miller Capacitance 33
viii Contents

3.4 Multiplexed-Input Architectures 35


3.5 Recycling Architecture 39
3.6 Switched-Capacitor Architecture 40
3.7 Current-Mode Architecture 42
References 43

CHAPTER 4 BASIC PRINCIPLES OF DIGITAL-TO-ANALOG


CONVERSION 45

4.1 General Considerations 45


4.2 Performance Metrics 47
4.3 Reference Multiplication and Division 49
4.3.1 Voltage Division 50
4.3.2 Current Division 55
4.3.3 Charge Division 63
4.4 Switching and Logical Functions in DACs 70
4.4.1 Switching Functions in Resistor-Ladder DACs 70
4.4.2 Switching Functions in Current-Steering DACs 72
4.4.3 Switching Functions in Capacitor DACs 74
4.4.4 Binary-to-Thermometer Code Conversion 76
References 77

CHAPTER 5 DIGITAL-TO-ANALOG CONVERTER ARCHITECTURES 79

5.1 Resistor-Ladder DAC Architectures 79


5.1.1 Ladder Architecture with Switched Subdivider 79
5.1.2 Intermeshed Ladder Architectures 82
5.2 Current-Steering Architectures 84
5.2.1 R-2R-Network Based Architectures 84
5.2.2 Segmented Architectures 90
References 94

CHAPTER 6 ANALOG-TO-DIGITAL CONVERTER ARCHITECTURES 96

6.1 General Considerations 96


6.2 Performance Metrics 99
6.3 Flash Architectures 101
6.3.1 Reference Ladder DC and AC Bowing 103
6.3.2 Nonlinear Input Capacitance 106
Contents ix

6.3.3 Kickback Noise 107


6.3.4 Sparkles in Thermometer Code 108
6.3.5 Metastability 110
6.3.6 Slew-Dependent Sampling Point 112
6.3.7 Clock Jitter and Dispersion 112
6.3.8 Gray Encoding 114
6.4 Two-Step Architectures 116
6.4.1 Effect of Nonidealities 121
6.4.2 Two-Step Recycling Architecture 124
6.4.3 Two-Step Subranging Architecture 125
6.5 Interpolative and Folding Architectures 126
6.5.1 Interpolation 127
6.5.2 Folding Architectures 132
6.5.3 Folding with Interpolation 136
6.6 Pipelined Architectures 140
6.7 Successive Approximation Architectures 143
6.8 Interleaved Architectures 147
References 149

CHAPTER 7 BUILDING BLOCKS OF DATA CONVERSION SYSTEMS 153

7.1 Amplifiers 153


7.1.1 Open-Loop Amplifiers 153
7.1.2 Closed-Loop Amplifiers 160
7.1.3 Operational Amplifiers 164
7.1.4 Gain Boosting Techniques 171
7.1.5 Common-Mode Feedback 172
7.2 Comparators 177
7.2.1 Bipolar Comparators 181
7.2.2 CMOS Comparators 188
7.2.3 BiCMOS Comparators 191
References 195

CHAPTER 8 PRECISION TECHNIQUES 198

8.1 Comparator Offset Cancellation 198


8.1.1 Input Offset Storage 199
8.1.2 Output Offset Storage 201
8.1.3 Multistage Offset Storage 202
8.1.4 Comparators Using Offset-Cancelled Latches 206
8.2 Op Amp Offset Cancellation 208
X Contents

8.3 Calibration Techniques 211


8.3.1 DAC Calibration Techniques 211
8.3.2 ADC Calibration Techniques 218
8.4 Range Overlap and Digital Correction 224
References 229

CHAPTER 9 TESTING AND CHARACTERIZATION 232

9.1 General Considerations 232


9.2 Sampling Circuits 234
9.3 D/A Converters 239
9.4 A/D Converters 239
9.4.1 Static Testing 239
9.4.2 Dynamic Testing 241

INDEX 252

You might also like