0% found this document useful (0 votes)
144 views3 pages

Index

The document summarizes an auxiliary circuit with 4 channels that can be individually adjusted to output 1, 2, 4, or 6 amps at 24VDC from an input of 24VDC. It has overcurrent, overvoltage, and remote restart protection. The circuit is DIN rail mountable, operates from 0-55°C, and measures 90x70x80mm.

Uploaded by

Vijay Bhure
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
144 views3 pages

Index

The document summarizes an auxiliary circuit with 4 channels that can be individually adjusted to output 1, 2, 4, or 6 amps at 24VDC from an input of 24VDC. It has overcurrent, overvoltage, and remote restart protection. The circuit is DIN rail mountable, operates from 0-55°C, and measures 90x70x80mm.

Uploaded by

Vijay Bhure
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

INTERNET-DATASHEET of Art.-No.

9000-41034-0100600

MICO Electronic auxiliary circuit, 4 channels IN: 24VDC OUT: 24V/1-2-4-6ADC

MICO 4.6
4 channels
Current adjustment 1, 2, 4, 6 A

Image

- Fire protection (EN 60950-1)


- Operating voltage protection (EN 61131-2)
- Operating condition capacity (EN 61131-1)

Vicarious picture

Approvals

Technical Data
Operating voltage 24 V DC
Operating voltage range 18...30 V DC
Number of channels 4 channels
Current adjustment 1 A, 2 A, 4 A, 6 A, by countersinked rotary switch, sealed
Inrush capacity max. 20 mF (per channel)
Group alarm output potential free alarm output 30 V AC/DC, 100 mA
Remote restart (ON) 10...30 V DC
Impulse length min. 20 ms
General data
Connection Spring clamp terminals
Input terminals 2 × 16 mm²
Output terminals per output 1 × 4 mm²
Alarm terminals 2.5 mm²
Bridging concept two sides, with spring clamp terminals or bridge set (max. 40 A)
Mounting method DIN-rail mountable TH35 (EN 60715)
Temperature range 0...+55 °C (storage temperature -40...+80 °C)
Dimensions H × W × D 90 x 70 x 80 mm

All data on this data sheet was compiled carefully.


Liability regarding correctness, completeness, and actuality is limited to gross negligence. Created: 05/12
Murrelektronik GmbH | Falkenstraße 3, D-71570 Oppenweiler | Fon +49 7191 47-0, Fax +49 7191 47-130 | [email protected] | www.murrelektronik.com
INTERNET-DATASHEET of Art.-No. 9000-41034-0100600

Commercial data
Gross weight 200
Net weight 200
Weight unit gram
Basic unit pc.
Customs tariff number 85363010
Unit (piece) 1
Limited value 1

All data on this data sheet was compiled carefully.


Liability regarding correctness, completeness, and actuality is limited to gross negligence. Created: 05/12
Murrelektronik GmbH | Falkenstraße 3, D-71570 Oppenweiler | Fon +49 7191 47-0, Fax +49 7191 47-130 | [email protected] | www.murrelektronik.com
INTERNET-DATASHEET of Art.-No. 9000-41034-0100600

Circuit diagram

Dimension drawing

All data on this data sheet was compiled carefully.


Liability regarding correctness, completeness, and actuality is limited to gross negligence. Created: 05/12
Murrelektronik GmbH | Falkenstraße 3, D-71570 Oppenweiler | Fon +49 7191 47-0, Fax +49 7191 47-130 | [email protected] | www.murrelektronik.com

You might also like