Scribd
Upload
307 views1 page

Welding Machine Safety Procedures

The document outlines safety procedures for operating welding machines. It lists pre-operation checks like ensuring a clean work area, proper protective equipment, and ventilation. During operation, it instructs keeping hands away from the work piece and electrode, and not leaving the welder unattended. Post-operation steps include allowing materials to cool before handling, switching off the machine and extraction, and cleaning the work area.

Uploaded by

Tobexi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
307 views1 page

Welding Machine Safety Procedures

The document outlines safety procedures for operating welding machines. It lists pre-operation checks like ensuring a clean work area, proper protective equipment, and ventilation. During operation, it instructs keeping hands away from the work piece and electrode, and not leaving the welder unattended. Post-operation steps include allowing materials to cool before handling, switching off the machine and extraction, and cleaning the work area.

Uploaded by

Tobexi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

WELDING MACHINE SAFETY PROCEDURES

1. PRE-Operation:

 Ensure all Fire Safety measures and precautions are carried out
as per Company procedures
 Ensure the work area is clean and clear of grease, oil and any
other flammable materials.
 Keep the welding equipment, work area and gloves dry to avoid
electric shocks.
 Stand on rubber insulating matting during operation (where
supplied).
 Ensure the gloves, welding gun and work leads are in good
condition (i.e. no exposed wiring).
 Check that other work areas are protected from flash (e.g. welding
curtains).
 Ensure appropriate ventilation is in place prior to use as welding of
aluminium, zinc etc will release harmful fumes.
 Ensure appropriate PPE is worn.
 Identify ON/OFF switch

2. Operation:
 Keep hands clear of work piece and away from electrode and
ensure operator does not wrap electrode leads around themselves.
 Ensure power is turned off (from wall socket) before inserting or
removing electrodes from electrode holder/handle.
 Ensure current is correctly set according to electrode selection.
 Never leave the welder running unattended.

3. POST-Operation:
 Ensure sufficient time for materials to cool before handling.
 Switch off machine and fume extraction (if relevant).
 Hang up electrode holder and welding cables.
Practice good housekeeping and ensure the area is clean and tidy.

You might also like