Scribd Logo
Upload

Welcome to Scribd!

  • 270 views

    WPS Sample

    Uploaded by

    Bhanu Pratap Choudhury
    This Welding Procedure Specification outlines the parameters for flux-cored arc welding of butt joints between 25-52mm thick plates of various steel grades. It specifies the filler metal, welding technique, positions, voltages, speeds, heat inputs and other key variables for multi-pass single electrode flux-cored arc welding. Post-weld heat treatment is not required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WPS Sample

    Uploaded by

    Bhanu Pratap Choudhury
    270 views1 page
    This Welding Procedure Specification outlines the parameters for flux-cored arc welding of butt joints between 25-52mm thick plates of various steel grades. It specifies the filler metal, welding technique, positions, voltages, speeds, heat inputs and other key variables for multi-pass single electrode flux-cored arc welding. Post-weld heat treatment is not required.

    Original Description:

    Sample WPS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This Welding Procedure Specification outlines the parameters for flux-cored arc welding of butt joints between 25-52mm thick plates of various steel grades. It specifies the filler metal, welding technique, positions, voltages, speeds, heat inputs and other key variables for multi-pass single electrode flux-cored arc welding. Post-weld heat treatment is not required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    270 views1 page

    WPS Sample

    Uploaded by

    Bhanu Pratap Choudhury
    This Welding Procedure Specification outlines the parameters for flux-cored arc welding of butt joints between 25-52mm thick plates of various steel grades. It specifies the filler metal, welding technique, positions, voltages, speeds, heat inputs and other key variables for multi-pass single electrode flux-cored arc welding. Post-weld heat treatment is not required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Welding Procedure Specification (WPS)

    Welding Procedure Specification: WPS01 WPQR No.: PQR01

    Manufacturer: Welding Manufacturer


    Parent Material Designation:
    Material Thickness (mm): 25 ≤ t ≤ 52
    A, B, D, AH32/36, DH32/36, EH32/36
    Outside Diameter (mm): N/A Method of Preparation and Cleaning: N/A

    Filler Metal Designation and brand name: SA3YM, DSII81-K2 (SeAH, ESAB)
    Welding Technique: Multipass, Single
    Welding Process/Equipment: FCAW / Xsystem
    Electrode
    Joint Type and Weld Type: Butt weld joint Welding Position: PA, PC, PF
    Weld Preparation Details
    Joint Design Welding Sequences

    Size of Type of Heat


    Welding Voltage Speed Welding
    Run Filler current/ Current (A) Input
    Process (V) (cm/min) Position
    Metal Polarity (KJ/cm)
    Root 200-250 25-27 20-23 13-20
    PA
    Other 220-240 22.5-26 18-22 13.5-21

    FCAW Root 1.4 mm DCEP 160-210 20-25 13-15 12.8-24


    PC
    Other 220-230 21-25 20-22 12.6-17.2
    Root 170-180 20-22 8-10 20.4-30
    PF
    Other 200-220 20-23 13-15 16-23
    Any Special Backing or Drying: Ceramic backing
    Designation Gas /Flux: Gas Flow Rate:
    - Shielding: CO2 - Shielding: 20-25L/min
    - Backing: N/A - Backing: N/A
    Preheat Temperature Min. : t ≤ 38mm: 12°C / 38 < t ≤ 52 mm: 66°C

    Interpass Temperature: Max.250°C

    Post-weld Heat Treatment and/or Ageing: N/A


    Other Information*: Back side gouging and welding may be applied if back bead appearance is not
    acceptable.

    Checked by: M.Y


    Prepared by: M.Z Approved by: MM

    *If required

    You might also like