FSP 150CC-GE201

CARRIER ETHERNET ACCESS

Product Overview
Optimized for mobile backhaul and large-scale wholesale Ethernet applications, the FSP 150CC-GE201 enables cost-
effective delivery of Carrier Ethernet 2.0 services and highly accurate synchronization over fiber-based access networks.
All interfaces are copper and fiber combo ports with Fast and Gigabit Ethernet multi-rate capability. Network interface
protection, redundant power supplies and the temperature-hardened design ensure highest service availability.

Syncjack™ Timing Excellence

Its comprehensive Syncjack™ technology for timing distribution, monitoring and timing service assurance opens
new revenue opportunities from the delivery of SLA-based synchronization services. Offering unique flexibility, the
FSP 150CC-GE201 simultaneously supports Synchronous Ethernet and IEEE 1588v2 across packet backhaul networks.
Traditional T1/E1- or GPS-based synchronization can now be replaced with highly accurate synchronization and
controlled timing over packet.

End-to-End Etherjack™ Service Assurance

The FSP 150CC-GE201 is designed for highest service avail- Features & Benefits
ability. ADVA Optical Networking’s Etherjack™ demarcation
technology enables service providers to provide an intelligent
• Optimized for large-scale access network
Carrier Ethernet 2.0 service demarcation point, compliant with
deployments in intelligent mobile backhaul
the latest OAM standards such as 802.3ah, 802.1ag, Y.1731 and
and wholesale Carrier Ethernet 2.0
RFC 2544. The FSP 150CC-GE201 also features synthetic frame
applications
loss and delay measurement for multi-point service monitoring.
The sophisticated and MEF-certified UNI function includes • MEF-certified UNI implementation
support for a large number of EVCs, as well as hierarchical with hierarchical traffic management for
QoS management. SLA verification can be performed on a per- advanced service definition and low-latency
service basis to ensure strong latency, jitter and packet delivery forwarding
performance for mission-critical applications.
• Comprehensive Syncjack™ technology for
Scalability for Wholesale Deployment timing distribution and delivery of SLA-
As Carrier Ethernet networks scale, low-touch provisioning based synchronization services
capabilities become essential to ensure cost-efficient service
• Etherjack™ demarcation technology for
rollout and to significantly reduce the need for truck rolls.
support of stringent SLAs and integration
With the extensive set of standards-based auto-configuration
with a wide range of back-office support
functions and remote OAM capabilities built into the FSP 150CC-
tools
GE201, unskilled craft personnel can install and turn-up services
without onsite provisioning. Combined with the FSP 150CM, • Low-touch provisioning capability to
a modular ENNI demarcation and aggregation solution, the ensure that unskilled craft personnel can
FSP 150CC-201 is ideal for large-scale wholesale and open- install and turn-up services without any
access service offerings of intelligent Carrier Ethernet 2.0 onsite provisioning
services.
Technical Information

Access Capacity Low-Touch Provisioning

• One port 10/100/1000BaseT or one port 100/1000BaseX (SFP) • DHCP/BOOTP auto-configuration
• IEEE 802.1x port authentication
Network Interface • Text-based configuration files
• 2 ports 10/100/1000BaseT or 2 ports 100/1000BaseX (SFP) • TFTP for configuration file copy

Network Interface Redundancy Management and Security

• LAG Active / Standby
Local Management
• ITU-T G.8031 Linear Protection Switching
• Serial connector (RJ45) using CLI
• Local LAN port (RJ45) using CLI, SNMP and Web GUI interfaces
Synchronization (optional)
• ITU-T G.8261 / G.8262 / G.8264 Synchronous Ethernet on all Remote Management
interfaces • Maintains in-band VLAN and MAC-based management tunnels
• Sync Status Message support • Full interoperable with FSP 150CM and other FSP 150CC products
• IEEE 1588v2 Precision Time Protocol for Time of Day Management Protocols
• BITS-in and BITS-out • Telnet, SSH (v1/v2), HTTP/HTTPS, SNMP (v1/v2c/v3)
• BITS Sync Status Messaging
Secure Administration
VLAN Support • Configuration database backup and restore
• 4096 VLANs (IEEE 802.1Q customer-tagged) and stacked VLANs • System software download via FTP, HTTPS, SFTP or SCP
(Q-in-Q service provider tagged) (dual flash banks)
• 2-tag management (push/pop/swap) for c-tag and s-tag • Remote authentication via RADIUS/TACACS
• IEEE 802.1ad Provider Bridging (c-tag, s-tag) • SNMPv3 with authentication and encryption
• Ethertype translation • Access Control List (ACL)
• 128 Ethernet Virtual Circuits (EVC) IP Routing
• 9612 Byte per frame MTU transparency • DHCP, RIPv2 and static routes, ARP cache access control

Traffic Management System logging

• Alarm log, audit log and security log
• Acceptable client frame policy: tagged or untagged
• Service classification based on 802.1p, 802.1Q and IP-TOS/DSCP
Regulatory and Standards Compliance
• MEF-compliant policing (CIR/CBS/EIR/EBS) with 3-color marking
• IEEE 802.1Q (VLAN), 802.1p (Priority), 802.1ag (CFM), 802.3ah
and 8 classes of service
(EFM), 802.1x
• Hierarchical queuing and shaping
• ITU-T Y.1731, G.8010/Y.1306, G.8011.1+2, G.8012, G.8031
• Port shaping on transmit for both client and network ports
(APS)
Ethernet OAM • MEF-6.1, -9, -10.2, -11, -14, -20, -21, -22.1, -23.1, -25, -26.1,
-30, -33, -35
• IEEE 802.3ah EFM-OAM Link Management
• IETF RFC 2544 (Frame Tests), RFC 2863 (IF-MIB), RFC 2865
• IEEE 802.1ag Connectivity Fault Management (CFM)
(RADIUS), RFC 2819 (RMON)
• ITU-T Y.1731 Performance Monitoring
• ANSI C84.1-1989
• Terminal and facility loopbacks on port- and EVC-level for all
• ETSI 300 132-2, BTNR2511, ETS 300-019,
interfaces
ETS 300-019-2-[1,2,3], ETS 300-753
• Cable diagnostics with benchmarks (electrical interfaces only)
• NEBS Level 3 certified
• Embedded RFC 2544 test generator and analyzer (ECPA)
• Telcordia GR-499, GR-63-CORE, SR-332
• MEF-compliant Layer 2 Control Protocol Disposition and
• Safety IEC/UL/EN 60950, 21CFR1040.10, EN 60825, EN 50371,
extensive filter options for Layer 2 packet types
EN 300-386, EN 50160, IEC 60320/C14
• Link Loss Forwarding to signal local link and network path
• EMI EN 300-386, GR-1089-CORE, ETS 300-132, FCC Part 15,
failures
Class A, Industry Canada
• Dying gasp message for power failure alarming

Performance Monitoring Environmental

• Dimensions: 1U compact chassis, 439mm x 43mm x 269mm /
• RFC 2819 RMON Etherstats on a per-port and per-service basis
17.3” x 1.75” x 10.6” (W x H x D), ETSI-compliant
• 15-minute and 1-day performance data bins
• Operating temperature: -40 to +65°C (hardened environment)
• IEEE 802.3ah/ITU-T G.8021 PHY level monitoring
• Storage temperature: -40 to +70°C (GR-63-CORE)
• ITU-T Y.1731 single- and dual-ended Frame Loss Measurement
• Humidity: 5 to 95%, B1 (non-condensing)
• Synthetic Frame Loss and Delay Measurement for multi-point
• Modular AC-PSU: 90 to 264VAC (47 to 63Hz) with over-voltage
service monitoring
and over-current protection
• Multi-CoS monitoring on EVCs scaling up to 512 simultaneous
• Modular DC-PSU: -36 to -72VDC or +18 to +30VDC with
flows
over-voltage and over-current protection
• Threshold-setting and threshold-crossing alerts
• Maximum power consumption: 20 Watts
• Physical parameter monitoring for SFP optics, including TCAs
• Temperature monitoring and thermal alarms

For more information please contact an ADVA Optical Networking

consultant or visit us at www.advaoptical.com

Data Sheet, version 02 / 2013