Scribd
Upload
195 views

Assignment 3 PDF

This document contains a 10-question physics assignment on forces and motion concepts including: 1) Calculating the force and comparing to weight of an electron accelerating between speeds. 2) Finding accelerations of an object under two force configurations. 3) Determining magnitude and direction of horizontal forces on an object with known acceleration, mass, and one force. 4) Plotting acceleration of a sliding object versus applied horizontal force considering tensions in the system. 5) Calculating forces registered on a spring scale in an elevator undergoing different accelerations. 6) Finding acceleration, friction, and speed for a block sliding down an incline. 7) Drawing free body diagrams and

Uploaded by

Ahmed Attalla
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
195 views

Assignment 3 PDF

This document contains a 10-question physics assignment on forces and motion concepts including: 1) Calculating the force and comparing to weight of an electron accelerating between speeds. 2) Finding accelerations of an object under two force configurations. 3) Determining magnitude and direction of horizontal forces on an object with known acceleration, mass, and one force. 4) Plotting acceleration of a sliding object versus applied horizontal force considering tensions in the system. 5) Calculating forces registered on a spring scale in an elevator undergoing different accelerations. 6) Finding acceleration, friction, and speed for a block sliding down an incline. 7) Drawing free body diagrams and

Uploaded by

Ahmed Attalla
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BENHA UNIVERSITY

Faculty of Computers and Information

Course Code: BSC 125 Course Title: Physics I

Dr/ Ahmad Taher

Assignment 3

2. An electron of mass 9.11 × 10-31 kg has an initial speed of 3.00 × 105 m/s. It travels in a straight
line, and its speed increases to 7.00 × 105 m/s in a distance of 5.00 cm. Assuming its acceleration is
constant,
(a) Determine the magnitude of the force exerted on the electron and
(b) Compare this force with the weight of the electron, which we ignored.

3. Two forces F1 and F2 act on a 5.00-kg object. Taking F1 = 20.0 N and F2 =15.0 N, find the
accelerations of the object for the configurations of forces shown in parts (a) and (b) of Figure 1.

Figure 1

4. An object of mass m = 1.00 kg is observed to have an acceleration a with a magnitude of 10.0


m/s2 in a direction 60.0° east of north. Figure 2 shows a view of the object from above. The force
F2 acting on the object has a magnitude of 5.00 N and is directed north. Determine the magnitude
and direction of the one other horizontal force F1 acting on the object.

Figure 2

1
5. In the system shown in Figure 3, a horizontal force Fx acts on an object of mass m2 = 8.00 kg.
The horizontal surface is frictionless. Consider the acceleration of the sliding object as a function
of Fx .
(a) For what values of Fx does the object of mass m1 = 2.00 kg accelerate upward?
(b) For what values of Fx is the tension in the cord zero?
(c) Plot the acceleration of the m2 object versus Fx . Include values of Fx from 2100 N to 1100 N.

Figure 3
6. Consider a 72.0-kg man standing on a spring scale in an elevator. Starting from rest, the
elevator ascends, attaining its maximum speed of 1.20 m/s in 0.800 s. It travels with this constant
speed for the next 5.00 s. The elevator then undergoes a uniform acceleration in the negative y
direction for 1.50 s and comes to rest. What does the spring scale register:

(a) before the elevator starts to move,


(b) during the first 0.800 s,
(c) while the elevator is traveling at constant speed, and
(d) during the time interval it is slowing down?

7. A 3.00-kg block starts from rest at the top of a 30.0° incline and slides a distance of 2.00 m
down the incline in 1.50 s. Find

(a) The magnitude of the acceleration of the block,


(b) The coefficient of kinetic friction between block and plane,
(c) The friction force acting on the block, and
(d) The speed of the block after it has slid 2.00 m.

8. Two blocks connected by a rope of negligible mass are being dragged by a horizontal force
(Fig. 4). Suppose F = 68.0 N, m1 = 12.0 kg, m2 = 18.0 kg, and the coefficient of kinetic friction
between each block and the surface is 0.100.

(a) Draw a free-body diagram for each block.


(b) Determine the acceleration of the system and
(c) Determine the tension T in the rope.

Figure 4

2
9. An object of mass M is held in place by an applied force F and a pulley system as shown in
Figure 5. The pulleys are massless and frictionless.

(a) Draw diagrams showing the forces on each pulley.


(b) Find the tension in each section of rope, T1, T2, T3, T4, and T5 and
(c) Find the magnitude of F .

Figure 5
10. An inventive child named Nick wants to reach an apple in a tree without climbing the tree.
Sitting in a chair connected to a rope that passes over a frictionless pulley (Fig. 6), Nick pulls on
the loose end of the rope with such a force that the spring scale reads 250 N. Nick’s true weight is
320 N, and the chair weighs 160 N. Nick’s feet are not touching the ground.

(a) Draw one pair of diagrams showing the forces for Nick and the chair considered as separate
systems and another diagram for Nick and the chair considered as one system.
(b) Show that the acceleration of the system is upward and find its magnitude.
(c) Find the force Nick exerts on the chair

Figure 6

You might also like