We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 9
Bwave
OPERATING
INSTRUCTIONS
Model Number: MCWC14M
Please read this manual carefully before using the refrigerator.
NATIONAL SERVICE CENTER
1-800-553-43551.Part List
4.Shelf
2.Temperature Control Knob
3.Wine Rack
4.Adjustable foot
5.Glass Door
6.Recessed Handle2.Correctly positioning
Well Ventilating
There is need of good ventilation around the refrigerator for
easy dissipation of heat, high efficiency of refrigeration and
low power consumption. For this purpose, sufficient clear
space should be needed around the refrigerator, its back is
at least 100mm away from the wall, its sides at least have a
space of 200mm separately and the height from over its top
is not less than 300mm. A clear space should be left to open
its doors to 160°
Power Supply
The refrigerator is only applied with power supply of single phase
alternating current of 115V, 60Hz.If fluctuation of voltage in the
district user is of so large that the voltage exceeds the above
scope, for safety sake, be sure to apply A.C. automatic voltage
regulator to the refrigerator. The refrigerator must employ a special
power socket instead of common one other electric appliances. Its
plug must match the socket with ground wire.
Power Line Cord
The cord should be neither lengthened nor folded into
coil during operation. Moreover, it is forbidden that cord
is kept close onto the compressor at the back of the
refrigerator, the surface temperature of which is quite
high when operating. Touching with it would deactivate
the insulation or cause leakage for electricity.
Use of extension cords are not recommended.
Protection from Moisture
Avoiding placing the refrigerator in a place where heavy
moisture is present so as to minimize possibility of rusty
for its metal parts; And water may form in the surface of the
glass door Still more, the refrigerator is forbidden to
be directly sprayed by water, otherwise, poor insulation and
current leakage would occur.