7235 Eng
7235 Eng
7235 Eng
I.D. PIPE
WELDED AFTER
HYDROTEST) FULL ENCIRC. M SEAMLESS M X42 M
‘D’
‘E’
* MINIMUM
MINIMUM
DISTANCE WITH VALVE IN CLOSED POSITION (From top of ball if Ball Valve.)
DIAMETER CUTTER CAN PASS THRU.
**
WERE ABOVE DIMENSIONS PHYSICALLY TAKEN: YES M NO M
HOT TAP POSITION: ______________ (angle) HOT TAP REQUIRED DATE: _________________
HEADER POSITION: VERT: M HORIZ: M
HOT TAP ELEVATION: __________ (meters/feet) HOT TAP REQUESTER:
H2S CONCENTRATION: ___________ %
NAME: __________________________
___________
TEL: ________________________________
_____
FAX: ____________________________________