Scribd
Upload
907 views5 pages

Restriction Orifice Sizing PDF

This document contains calculations for sizing a restriction orifice based on the RW Miller method. It provides project details and fluid properties, then lists the upstream and downstream pressure and temperature conditions. The maximum flowrate is calculated as 15845 kg/hr given an input orifice diameter of 1 mm. Tables show the input parameters and results of the sizing calculations.

Uploaded by

saka dewa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
907 views5 pages

Restriction Orifice Sizing PDF

This document contains calculations for sizing a restriction orifice based on the RW Miller method. It provides project details and fluid properties, then lists the upstream and downstream pressure and temperature conditions. The maximum flowrate is calculated as 15845 kg/hr given an input orifice diameter of 1 mm. Tables show the input parameters and results of the sizing calculations.

Uploaded by

saka dewa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Restriction Orifice Sizing.

xls

CRITICAL GAS ORIFICE FLOW - RW MILLER METHOD


Reference : Flow Measurement Engineering Handbook, RW Miller

Project Data : Fluid Properties :

Project Number : xxx Gas Mol. Wt.


Project Name : Cp/Cv
Subject : Compressibility, Z
Calculation Number : Viscosity
By :
Revision :

Flow Conditions :-
Upstream Press. 50.00 Flow Regime
Down stream Press. 18.00 #DIV/0!
U/S Temp. 80.0
USE THIS BUTTON TO CALCU
Pipeline I.D. 1.00 SIZE FOR AN INPUT MAXIMUM

Input Orif. dia. for calculating Max. Flow : 1 mm


Input Max. Flow for calculating Orif. dia. : 34933
Calculated Maximum Flow : 15845.343 kg/hr

Calculations :

w (mass flowrate) 4.401484156 kg/s


C (coefficient of flow) 8463.734492
r (upstream density) 4.634442911 kg/m
3

Kc (flow coeff ratio) 0.749798643


b 0.999999998
FtpPf1 384.7552666
(k+1)/(k-1) -4.004208855
2/(k+1) 1.249737223
Ycr 0.506081629
rc #DIV/0!
Pressure ratio 0.505380364

Page 1
Restriction Orifice Sizing.xls

U/S Pressure :
Bara 5 446.0574876
kPaA
Barg
Psia
Psig
Atm

D/S Pressure :
Bara 5 225.4286955
kPaA
Barg
Psia
Psig
Atm

Temperature :
°C 2 26.66666667
°F

Pipe I.D. :

mm. 2 25.4
in.

Gas Flow :
Kg/hr. 2 15845.3433 Kg/hr.

Page 2
Restriction Orifice Sizing.xls

Lb/hr.
3
sm /hr.
3
sm /d
3
MMsm /d
SCF/hr.
SCF/day
MMSCF/d

Page 3
Restriction Orifice Sizing.xls

1.126E+11

Page 4
Restriction Orifice Sizing.xls

24.85
1.25
0.96
0.01 cP

USE THIS BUTTON TO CALCULATE THE ORIFICE


SIZE FOR AN INPUT MAXIMUM FLOWRATE

Page 5

You might also like