Scribd
Upload
274 views1 page

Episensor Model Es-U2

The EpiSensor ES-U2 is a uniaxial accelerometer designed for structural engineering applications to measure accelerations up to ±4g. It has a wide bandwidth of DC to 200Hz and low noise to detect low-level vibrations. The user can select the full-scale recording range between ±0.25g to ±4g and output type. The sensor requires no external electronics and provides an amplified, conditioned signal to data acquisition systems.

Uploaded by

Moța Florin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
274 views1 page

Episensor Model Es-U2

The EpiSensor ES-U2 is a uniaxial accelerometer designed for structural engineering applications to measure accelerations up to ±4g. It has a wide bandwidth of DC to 200Hz and low noise to detect low-level vibrations. The user can select the full-scale recording range between ±0.25g to ±4g and output type. The sensor requires no external electronics and provides an amplified, conditioned signal to data acquisition systems.

Uploaded by

Moța Florin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EpiSensor ES-U2

Uniaxial Force Balance Accelerometer

For use in a variety of applications The sensor has a number of full scale outputs to match the traditional
Kinemetrics earthquake recording instruments, as well as the most modern
The EpiSensor ES-U2 force balance accelerometer is a uniaxial surface Kinemetrics’ Rock+ series and Quanterra’s Q330 series of dataloggers.
package designed primarily for structural engineering applications.
However, it can be used in a variety of applications for measuring EpiSensor force balance accelerometers are also available in triaxial surface and
accelerations up to ±4g and down to the ambient noise level. With borehole (the FBA ES-SB shallow and FBA ES-DH deep) packages.
full-scale recording ranges of ± 0.25 to ± 4g (user selectable) the ES-U2
provides on-scale recording of earthquake motions even at near-fault
locations and in a wide variety of structure types.

Because the ES-U2 is extremely low-noise, it can detect motions of the


ambient vibration field at most urban sites and civil structures from 1 Hz
to 200A Hz. This makes the ES-U2 a unique sensor at a great price. The
output of the ES-U2 is an amplified, conditioned signal—it requires no FEATURES
external electronics other than a data acquisition system.

The significantly improved bandwidth of DC to 200 Hz allows engineers


• Low noise
and scientists to study motions at higher frequencies while maintaining
the very important DC response that allows simple field calibration and
reduces processing confusion. • Extended bandwidth - DC to 200Hz

Output circuitry is also significantly enhanced. Four types of outputs can • User-selectable full-scale range
be field-selected by the user: ± 2.5V single-ended, ± 10V single-ended, ±
5V differential or ± 20V differential. • Calibration coil (standard)

• Single-end or differential output (user selectable)

SPECIFICATIONS

Dynamic range: 155 dB+ Linearity: < 1000 μg/g2


Hysteresis: < 0.1% of full scale
Bandwidth: DC to 200Hz
Cross-axis sensitivity: < 1% (including
Calibration coil: Standard misalignment)
Zero point thermal drift: < 500 μg/°C (1g sensor)
Full-scale range: User selectable at ± 0.25g, ± 0.5g, ± 1g, ± 2g Power consumption: Quiescent current <9 mA from +/- 12V
or ± 4g Mounting: Dual bolt for horizontal or vertical
mounting
Outputs: User selectable at: Operating Temperature: -20° to 70°C (0° to 160°F)
± 2.5V single-ended Housing: EMI/RFI Watertight enclosure
± 10V single-ended 55x65x97mm (2.2”x2.6”x3.8”)
± 5V differential Weight: 0.35kg (0.77 pounds)
± 20V differential
Zero adjust: User-friendly access holes for simple,
safe, efficient adjustment

USA - 222 Vista Ave., Pasadena, CA 91107 Switzerland - Z.I. Le Tresi 6B, 1028 Preverenges
Tel (626)795-2220 I Fax (626)795-0868 Tel +41 (21) 803-2829 I www.kinemetrics.com
01-23-18

You might also like