Scribd
Upload
1K views2 pages

08DDECVI32

Detroit Diesel

Uploaded by

Hamilton miranda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

08DDECVI32

Detroit Diesel

Uploaded by

Hamilton miranda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NUMBER: 08 DDEC VI–32 S.M. REF.: 75.

1 ENGINE: DD15 DATE: July 2008

SUBJECT: SPN 973/FMI 9

PUBLICATION: DDC-SVC-MAN-0029
Procedures for SPN 973/FMI 9 have changed.

SPN 973/FMI 9
This fault is typically the J1939 EBC1 (Engine Brake Switches) is missing.
Check as follows:
1. Check for multiple codes:
[a] If CPC SPN 168/FMI 0/14/18 (Battery Voltage) are present, troubleshoot these first.
[b] If MCM SPN 625/FMI 9 is present, troubleshoot and repair the CAN line.
[c] If only SPN 973/FMI 9 is present, go to the next step.
2. Has the CPC been recently reprogrammed?
[a] If yes, ensure the CPC Group PGR001 parameter “EBC1 Source Address SAE J1939” is
configured properly: 33 = non multiplex switches, 49 = multiple switches.
[b] If no, connect ServiceLink to determine which modules are configured for the vehicle
and their communication status. Once this is done, follow the appropriate module
communication troubleshooting procedures for the affected module.
ADDITIONAL SERVICE INFORMATION
Additional service information is available in the DD15 Troubleshooting Guide
(DDC-SVC-MAN-0029).

Detroit Diesel®, DDC®, Series 60® and the spinning arrows design are registered trademarks of Detroit Diesel Corporation.
© Copyright 2008 Detroit Diesel Corporation. All rights reserved. Printed in U.S.A.

You might also like