Scribd
Upload
153 views1 page

Assem 1

This 4-page assembly drawing shows a hole puncher with 6 labeled parts: A, B, C, D, E, and F. It provides details on the fabricator, materials used, scale, and was drawn by Muhd Aqif Fitri Bin Salehhuddin and checked by Dr. Koh Chng Theng on December 2, 2018 for a class project at Universiti Tun Hussein Onn Malaysia.

Uploaded by

Hakim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views1 page

Assem 1

This 4-page assembly drawing shows a hole puncher with 6 labeled parts: A, B, C, D, E, and F. It provides details on the fabricator, materials used, scale, and was drawn by Muhd Aqif Fitri Bin Salehhuddin and checked by Dr. Koh Chng Theng on December 2, 2018 for a class project at Universiti Tun Hussein Onn Malaysia.

Uploaded by

Hakim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 2 3 4 5 6

A A

B B

C C

DRAWN BY : MUHD AQIF FITRI BIN SALEHHUDDIN MATERIAL: ASSEMBLY DRAWING


UTHM
PLAIN CARBON STEEL DWG.
FACULTY OF MECHANICAL & TITLE : D
CHECKED BY : DR. KOH CHNG THENG
MANUFACTURING ENGINEERING QTY : 1
Universiti Tun Hussein Onn Malaysia DATE : Sunday, 2 December, 2018 PROJECT
TITLE : HOLE PUNCHER
FABRICATOR : SCALE

1:1 A4 DIMENSIONS IN mm DRAWING NO :


HOLE PUNCHER-001
SHEET :
1
of :
4
1 2 3 4 5 6

You might also like