Scribd Logo
Upload

Welcome to Scribd!

  • 160 views

    Ys 1100u

    Uploaded by

    kurocans
    The document provides instructions for using the YS-1100U RF data transceiver module. The module can transmit serial data via radio frequency using half duplex communication at 433MHz. It has interfaces for RS-232, RS-485, and TTL and supports baud rates up to 115kbps. The module is suitable for industrial applications requiring wireless data transmission across ranges of up to 500 meters. It has a temperature range of -35 to 75 degrees Celsius and 90% humidity tolerance.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Ys 1100u

    Uploaded by

    kurocans
    160 views3 pages
    The document provides instructions for using the YS-1100U RF data transceiver module. The module can transmit serial data via radio frequency using half duplex communication at 433MHz. It has interfaces for RS-232, RS-485, and TTL and supports baud rates up to 115kbps. The module is suitable for industrial applications requiring wireless data transmission across ranges of up to 500 meters. It has a temperature range of -35 to 75 degrees Celsius and 90% humidity tolerance.

    Original Title

    YS-1100U

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for using the YS-1100U RF data transceiver module. The module can transmit serial data via radio frequency using half duplex communication at 433MHz. It has interfaces for RS-232, RS-485, and TTL and supports baud rates up to 115kbps. The module is suitable for industrial applications requiring wireless data transmission across ranges of up to 500 meters. It has a temperature range of -35 to 75 degrees Celsius and 90% humidity tolerance.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    160 views3 pages

    Ys 1100u

    Uploaded by

    kurocans
    The document provides instructions for using the YS-1100U RF data transceiver module. The module can transmit serial data via radio frequency using half duplex communication at 433MHz. It has interfaces for RS-232, RS-485, and TTL and supports baud rates up to 115kbps. The module is suitable for industrial applications requiring wireless data transmission across ranges of up to 500 meters. It has a temperature range of -35 to 75 degrees Celsius and 90% humidity tolerance.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    YS-1100U Модуль приемопередатчика.

    Инструкция по применению

    YS-1100U RF Data Transceiver

    YS-1100 series is high data rate module for Serial data to RF. It bases on high performance RF IC and
    MCU, works on 433Mhz ISM frequency band, half duplex integrated receiving and transmitting. Modules
    could directly connect with monolithic processors, PC, RS485 devices, and other UART components with RS-
    232, RS-485 and UART/TTL level interface port. Transparent data interface, nakedness, and wide
    temperature design handles most industrial application though indoor/outdoor environments.
    1. Products Main Features
    · High data rate. Low power consumption and low cost;
    · Carrier frequency: 433MHz or ISM others optional;
    · Interface: RS-232/ RS-485/ TTL optional;
    · Multi-channels: 16 channels, expandable for 32 channels;
    · Adjustable Baud rate: 1200/2400/4800/9600/19200/38400bps, 115kbps;
    · Transparent data transmission: What has been received is exactly what has been transmitted,
    suitable for any standard or non-standard user protocols;
    · Interface format: 8N1/8E1/801 user-defined, or customization for other format interface;
    · Modulation: GFSK. Based on the Gaussian Frequency Shift Keying (GFSK) modulation, High anti-
    interference and Low BER (Bit error Rate);
    · Half duplex: Integration of receiver and transmitter，10ms auto change for receiving and sending;
    · Widen Temperature: -35…+75 C (-31~167 F);
    · Working humidity: 10%~90% relative humidity without condensation;
    · Impedance：50Ω (SMA antenna port, multiple antenna options available);

    2. Application areas
    · Automatic meter reading(AMR);
    · Wireless smart terminal: POS, PDA;
    · Wireless electronic display screen, LED display;
    · RS-485 wired multi-drop system changeover wireless system;
    · Wireless remote control, Environment monitor, telemetry system;
    · Check attendance system, Queue-management system and positioning in coal mine;
    · Industrial automatic data collection, Wireless Data Acquisition, Wireless sensor, SCADA.
    YS-1100U Модуль приемопередатчика. Инструкция по применению

    3. Specifications

    · RF power: <50mW/ 17dBm;


    · Receiving current: <20mA;
    · Transmitting current: <40mA;
    · Power supply: DC 3.3-5 V;
    · Receiving sensitivity:
    - 108 dBm (@9600bps)
    - 112 dBm (@ 1200bps);
    · Size: 47mmx24mmx6mm (without antenna port );
    · Range:
    <300m (BER=10- 5 @9600bps, when antenna is 2m above ground in open area)
    <500m (BER=10- 5 @ 1200bps, when antenna is 2m above ground in open area).

    4. Interface definition

    Pin Connection with


    Pin name Description Level Remands
    No. terminal

    Grounding of
    1 GND Ground
    power supply
    2 Vcc Power supply DC +3.3—5.5V
    Rx232 TXD Data transmitting, RS 232 RxD 1.Red LED flash
    TTL TXD Data transmitting TTL when transmitting;
    3
    2.One type
    RS485 A RS485 A -
    interface valid at
    Rx232 RXD Data receiving RS 232 TxD 1.Green LED flash
    TTL RXD Data receiving TTL when receiving;
    4
    2.One type
    RS485 В RS485 В
    interface valid at
    5 DGND Digital grounding NC
    6 NC Test in factory NC
    NOTE: Generally the module is in receiving status.

    5. Installation dimension
    YS-1100U Модуль приемопередатчика. Инструкция по применению

    6. Setting of channel, interface, and data format


    User can view and change the module’s parameter setting by testing software “YSPRG110.EXE” in the CD
    (Free): interface and air baud rate, channel No. and Interface format.

    Corresponding frequency points at 433MHz of 1~16 channels

    Channel Frequency Channel Frequency Channel Frequency Channel Frequency

    1 425.250MHZ 2 426.250MHZ 3 427.250MHZ 4 428.250MHZ

    5 429.250MHZ 6 430.250MHZ 7 431.250MHZ 8 432.250MHZ

    9 433.250MHZ 10 434.250MHZ 11 435.250MHZ 12 436.250MHZ

    13 437.250MHZ 14 438.250MHZ 15 439.250MHZ 16 440.250MHZ

    7. Antenna configuration
    Many appropriative antennas for low power RF modules are selected for meeting different user antenna
    configurations. Please ask our Sales office for further information about the antenna’s dimension and
    performance. The standard antennas are exterior flabelliform rubber antenna with helical SMA joint,
    magnetic car antenna.

    Package Standard: one module + A0# Helical SMA antennas + L0# 6pin line
    Notes:

    · Modules can share DC power supply with other equipment, Ensure the
    supply is stable (ideally <10mVpk ripple).
    · Keep the module away from other EMF generating components
    · Match 50Ω, 1/4wave antenna, high mount the antenna as close to the
    module as possible. Set antenna more than 2m above ground in open
    area to reach optimal range.

    You might also like