Scribd Logo
Upload

Welcome to Scribd!

  • 70 views

    Chemical Composition Limits For Aluminum Alloys

    Uploaded by

    Deep Sharma
    This document lists the chemical composition limits in weight percent for various aluminum alloys according to The Aluminum Association. It provides the maximum allowable limits for common elements like silicon, iron, copper, manganese, and magnesium in each alloy, with the minimum being aluminum. Some alloys allow ranges for certain elements while others specify a single maximum percentage. In total, over 20 common aluminum alloys and their chemical specifications are outlined.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Chemical Composition Limits For Aluminum Alloys

    Uploaded by

    Deep Sharma
    70 views2 pages
    This document lists the chemical composition limits in weight percent for various aluminum alloys according to The Aluminum Association. It provides the maximum allowable limits for common elements like silicon, iron, copper, manganese, and magnesium in each alloy, with the minimum being aluminum. Some alloys allow ranges for certain elements while others specify a single maximum percentage. In total, over 20 common aluminum alloys and their chemical specifications are outlined.

    Original Description:

    CHEMICAL COMPOSITION LIMITS FOR ALUMINUM ALLOYS

    Original Title

    Chemical Composition Limits for Aluminum Alloys

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document lists the chemical composition limits in weight percent for various aluminum alloys according to The Aluminum Association. It provides the maximum allowable limits for common elements like silicon, iron, copper, manganese, and magnesium in each alloy, with the minimum being aluminum. Some alloys allow ranges for certain elements while others specify a single maximum percentage. In total, over 20 common aluminum alloys and their chemical specifications are outlined.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    70 views2 pages

    Chemical Composition Limits For Aluminum Alloys

    Uploaded by

    Deep Sharma
    This document lists the chemical composition limits in weight percent for various aluminum alloys according to The Aluminum Association. It provides the maximum allowable limits for common elements like silicon, iron, copper, manganese, and magnesium in each alloy, with the minimum being aluminum. Some alloys allow ranges for certain elements while others specify a single maximum percentage. In total, over 20 common aluminum alloys and their chemical specifications are outlined.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    CHEMICAL COMPOSITION LIMITS FOR ALUMINUM ALLOYS

    Composition in percent by weight according to The Aluminum Association. The values indicate maximum limits unless shown as a range or a
    minimum.
    Alloy Si Fe Cu Mn Mg Cr Zn Ti OTHERS OTHERS Al
    EACH TOTAL MIN.
    1070 0.20 0.25 0.04 0.03 0.03 — 0.04 0.03 0.03 — 99.70
    1060 0.25 0.35 0.05 0.03 0.03 — 0.05 0.03 0.03 — 99.60

    1050 0.25 0.40 0.05 0.05 0.05 — 0.05 0.03 0.03 — 99.50
    1350 0.10 0.40 0.05 0.01 — 0.01 0.05 — 0.03 0.10 99.50
    1145 0.55 Si + Fe 0.05 0.05 0.05 — 0.05 0.03 0.03 — 99.45
    1100 0.95 Si + Fe 0.05-0.20 0.05 — — 0.10 — 0.05 0.15 99.00
    2024 0.50 0.50 3.8-4.9 0.30-0.9 1.2-1.8 0.10 0.25 0.15 0.05 0.15 Rem.

    3003 0.6 0.7 0.05-0.20 1.0-1.5 — — 0.10 — 0.05 0.15 Rem.

    3004 0.30 0.7 0.25 1.0-1.5 0.8-1.3 — 0.25 — 0.05 0.15 Rem.

    3005 0.6 0.7 0.30 1.0-1.5 0.20-0.6 0.10 0.25 0.10 0.05 0.15 Rem.

    3104 0.6 0.8 0.05-0.25 0.8-1.4 0.8-1.3 — 0.25 0.10 0.05 0.15 Rem.

    4004 9.0-10.5 0.8 0.25 0.10 1.0-2.0 — 0.20 — 0.05 0.15 Rem.

    4104 9.0-10.5 0.8 0.25 0.10 1.0-2.0 — 0.20 — 0.05 0.15 Rem.

    4043 4.5-6.0 0.8 0.30 0.05 0.05 — 0.10 0.20 0.05 0.15 Rem.

    4045 9.0-11.0 0.8 0.30 0.05 0.05 — 0.10 0.20 0.05 0.15 Rem.

    5005 0.30 0.7 0.20 0.20 0.50-1.1 0.10 0.25 — 0.05 0.15 Rem.

    5050 0.40 0.7 0.20 0.10 1.1-1.8 0.10 0.25 — 0.05 0.15 Rem.
    5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10 — 0.05 0.15 Rem.

    5252 0.08 0.10 0.10 0.10 2.2-2.8 — 0.05 — 0.03 0.10 Rem.

    5056 0.30 0.40 0.10 0.05-0.20 4.5-5.6 0.05-0.20 0.10 — 0.05 0.15 Rem.

    5657 0.08 0.10 0.10 0.03 0.6-1.0 — 0.05 — 0.02 0.05 Rem.
    5182 0.20 0.35 0.15 0.20-0.50 4.0-5.0 0.10 0.25 0.10 0.05 0.15 Rem.
    6061 0.40-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15 Rem.
    7075 0.40 0.50 1.2-2.0 0.30 2.1-2.9 0.18-0.28 5.1-6.1 0.20 0.05 0.15 Rem.

    Rem.=Remainder

    You might also like