Installcheck Cca 240eura

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Electrical Installation Test Equipment

Installcheck ONE - TOUCH ONLY


Easy and fast safety inspection of - autotest of electrical circuit
electrical installations Patent no. 200000308
Indispensible for every electrical installer! • Line Resistance
•Loop Resistance (TN)
Standards:
SIST HD 384 • Contact Voltage (Uc)
VDE 0100
•Earth Resistance (TT)
BS 7671, 16th
CEI 64.8 • RCD Trip out Time
• Insulation L/PE & N/PE

ADDITIONAL TESTS:
esult

•Continuity (Buzzer-sound)
Fail R

• Insulation - L / N, L / PE, N / PE

• Phase Rotation
/
Pass

• PE Error Test (dangerous voltage)


• Mains socket wiring analysis
L / N / PE
• Three-phase measurement of
insulation and resistance

EN 61010
EN 50081
EN 50082

No LCD display needed


• OK-LED lamp confirms the on going measurement and shows the type of fault
on the installation.
• Buzzer-sound signal confirms the completion of test operations.
• Flashing LED confirms test procedure and indicates the type of fault found
in installation.
All safety tests are done directly at the socket automatically
in only 3 seconds
All the tests are done directly at the
• One touch selection of the type of electrical installations depending on RCD/Fi.
socket
Additional particular tests: continuity, insulation L / N, L / L, L / PE, N /PE,
phase rotation, PE Error test, three-phase measurement of insulation and resistance.
– Batery capacity over 35 hours.
– Auto power-off after 10 min.
– The tester is totally protected against incorrect operations and is mains voltage
resistant in all the functions.

11
Electrical Installation Test Equipment Installcheck

TYPICAL APPLICATIONS
CONTINUITY PHASE ROTATION OUTLET WIRING

BUZZER
PE
collector

Phase Rotation Wiring

INSULATION L/PE and N/PE Auto Test (no RCD RCD): Line, Loop

Disconnected
mains voltage!

Auto Test (trip-out RCD): Line, Loop (RE), UC, t∆, ISO Auto Test (no-trip RCD): Line, Loop (RE), UC

Technical Specification
Mains Socket Wiring Analysis .................. Eight states recognized and Standard set Order No.: MI 2150
displayed
Phase rotation ...................................................... Un 440 V, 50 Hz – Instrument
– Carrying strap
PE Test (presence of phase voltage) .............................................. yes – Shuko-plug test cable,
Continuity Limit value .................................................... 2 Ω ±0.5 Ω 1m
Insulation Resistance Limit value ................... 0.6 ÷1.2 MΩ ±0.2 MΩ – Safety test leads with fixed
test tips, 1.5 m, 2 pcs
Nominal test voltage ......................................................... 500 V DC – Instruction Manual
RCD Test – Quick quide
Nominal differential current I∆N ...................... 30, 100, 300 or 500 mA – Calibration Certificate
Contact voltage Limit value ..................................... 25 V at I∆N ±5 V
– Declaration of Conformity
– Declaration of warranty
Test current ........................................................................ <0.5 I∆N
Trip-out time of RCD Limit value .................. 0.3 s (I∆N) or 0.04 s (5I∆N)
Test current ......................... I∆N (any selected I∆N) and 5I∆N (30 mA only) Optional accessories Order No.:
Fault Loop Resistance (RCD built-in) Limit value .............. 25 V / I∆N A 1111 S 1112 A 1020
Test current .......................................................................... <0.5I∆N
Fault Loop Resistance (RCD not built-in)
Limit value ................................................................. 1.5 Ω ±0.3 Ω
Test current ........................................................................... 0.5 A
Line Resistance Limit value ........................................ 1.5 Ω ±0.3 Ω
Test current ............................................................................ 0.5 A

A 1114 A 1115
General data
– Three phase adapter A 1111
Power supply ........................... 6 V (4 × 1.5 V alkaline battery IEC LR6) – Universal test cable 3 x 1.5 m
Battery capacity ........................................................... approx. 35 h with 3 safety test tips S 1112
Results displayed ...................... OK, or not OK by means of LED lamps – Alligator clip (insulated) A 1114
Sound signals .............................. ............................................. yes – Protection case A 1115
Operating voltage .......................................... 220/230/240 V, 50 Hz – Soft carrying bag A 1020
Dimensions (w × l × d) ......................................... 100 × 200 × 50 mm
Weight (without accessories, with batteries) ............................... 0.6 kg
Overvoltage category .................................................. CAT III / 300 V
Working temperature range ........................................... 0 up to 40 °C
Auto power OFF ............ yes, 10 minutes after completion of last action

12

You might also like