2/21/2019 Advance power electronics and Control - - Unit 4 - Week 3

[email protected] ▼

Courses » Advance power electronics and Control

Announcements Course Ask a Question Progress Mentor FAQ

Unit 4 - Week 3
Register for
Certification exam Assignment 3
The due date for submitting this assignment has passed. Due on 2019-02-20, 23:59 IST.
Course
outline Assignment submitted on 2019-02-14, 11:56 IST

How to access 1) For a single phase, full bridge, diode rectifier excited from a 230 V, 50 Hz source. With R = 10 1 point
the portal Ω & the inductance (L) large enough to maintain continues conduction, the average and RMS values of
diode currents will be
Week 1
7.85 A, 8 A
Week 2 10.35 A, 7.85 A
10.35 A, 14.6 A
Week 3 8 A, 8 A
Single Phase Yes, the answer is correct.
Converters III
Score: 1
Three Phase Accepted Answers:
Converter I
10.35 A, 14.6 A
Three Phase
2) A load of R = 60 Ω is fed from 1phase, 230 V, 50 Hz supply through a step-up transformer & 1 point
Converters II
than a diode. The transformer turns ratio = 2. The power delivered to the load is
Multipulse
Converters II
147 Watts
Effect of Source
Inductance and 714 Watts
PWM Rectifiers 417 Watts
Quiz : 974 Watts
Assignment 3
Yes, the answer is correct.
Week 4 Score: 1
Accepted Answers:
DOWNLOAD 714 Watts
VIDEOS
3) A step-down delta-star transformer, with per-phase turns ratio of 5 is fed from a 3-phase 1100 1 point
V, 50 Hz source. The secondary of this transformer is connected through a 3-pulse type rectifier, which is
feeding feeding an R load. Find the average value of output voltage.

220/ /√2 V
275 V
1100/√3 V
257 V

https://onlinecourses.nptel.ac.in/noc19_ee15/unit?unit=15&assessment=30 1/4
2/21/2019 Advance power electronics and Control - - Unit 4 - Week 3
Yes, the answer is correct.
Score: 1
Accepted Answers:
257 V

4) A 3-phase bridge rectifier charges a 240 V battery. The rectifier is given a 3 phase, 230 V 1 point
supply. The current limiting resistance in series with the battery is of 8 Ω. Find the average value of
battery charging current.

8.82 A
6.82 A
7.82 A
5.82 A

Yes, the answer is correct.

Score: 1
Accepted Answers:
8.82 A

5) A motor load is connected to a single-phase full bridge converter type controlled rectifier. The 1 point
net energy is transferred from ac source to the motor (dc load) when

π+α > 90
π-α > α
π+α > α
π-α > 90

Yes, the answer is correct.

Score: 1
Accepted Answers:
π-α > α

6) A single-phase full converter bridge, is connected to a RLE load. The source has a rms 1 point
voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows
from the DC load to the AC source. Consider E = 120 V, R = 0.4 Ω, L = 2 Henry.

142°
183°
124°
109°

Yes, the answer is correct.

Score: 1
Accepted Answers:
124°

7) A three-phase 3 pulse converter is operated from a 3-phase, 230 V, 50 Hz supply with load 1 point
resistance R = 10 Ω. Find the value of firing angle if an average output voltage of 50% of the maximum
possible output voltage is required.

35°
75.7°
25°
67.7°

https://onlinecourses.nptel.ac.in/noc19_ee15/unit?unit=15&assessment=30 2/4
2/21/2019 Advance power electronics and Control - - Unit 4 - Week 3
Yes, the answer is correct.
Score: 1
Accepted Answers:
67.7°

8) A 3-phase full converter feeds power to an R load of 10 Ω. For a firing angle delay of 30° the 1 point
load takes 5 kW. An inductor of large value is also connected to the load to make the current ripple free.
Find the value of per phase input voltage.

191/√3 V
230/√3 V
133 V
298/√3 V

Yes, the answer is correct.

Score: 1
Accepted Answers:
191/√3 V

9) A three-phase semi-converter circuit is given a supply of 400 V. It produces at the output 1 point
terminals an average voltage of 381 V. Find the rectification efficiency of the converter circuit.

99.65 %
95.25 %
91.25 %
97.65 %

Yes, the answer is correct.

Score: 1
Accepted Answers:
95.25 %

10)A 3-phase full converter delivers a ripple free load current of 10 A with a firing angle delay of 1 point
45°. The input voltage is 3-phase, 400 V, 50 Hz. Find the value of 2nd harmonic source current
amplitude.

11.25 A
0.256 A
2.69 sin (ωt – 45) A
0A

Yes, the answer is correct.

Score: 1
Accepted Answers:
0A

Previous Page End

https://onlinecourses.nptel.ac.in/noc19_ee15/unit?unit=15&assessment=30 3/4