MX5210

Transport Stream Re-multiplexer

The MX5210 is a compact and cost-

effective DVB re-multiplexing unit.
The combination of straightforward
service based configuration,
comprehensive feature set and
diverse interfacing options make it an
ideal tool for a wide range of
applications.

Business Benefits Application

• Compact form factor, The MX5210 is suited to a wide range of re-multiplexing applications including
automatic start-up on power cable and terrestrial regional head-ends and telecom distribution systems.
cycle to previous
configuration and a range of Base units
telecoms interfaces mean the
MX5210 is particularly well
suited for deployment in
MX5210 re-multiplexer (MX5210/BAS)
distributed network • Compact 1RU chassis
applications. • Service or component based re-multiplexing
• Up to 8 DVB ASI inputs
• Ideally suited to regional re-
multiplexing applications in • 2 DVB ASI copper outputs
cable networks thanks to • Output rate up to 190 Mbps
telecom inputs, QAM
• Advance internal PSI/SI regeneration
modulated output and
powerful internal processing • User friendly configuration via TANDBERG Device Controller (TDC)
of service information. • SNMP monitoring and configuration

Options

DVB ASI Input Card (TCOM30/HWO/4ASI-IN)

• Provides for input of transport streams for re-multiplexing
• Up to 100 Mbps MPTS and SPTS
• 4 inputs per card
• PSI/SI monitoring
QAM Output (TTEURO/HWO/QAM-MOD/A)
• Internal QAM modulator for digital cable applications
• Annex A, all modes to 256 QAM
• Annex B, 64 and 256 QAM
• IF output
QAM Output Up-converter (TTEURO/HWO/QAM-FBU)
• Provides for up-conversion of IF QAM output
• Full band, 47 - 862 MHz
SMPTE 310 Output (MX5210/HWO/OT12)
• Provides for output of transport stream in SMPTE 310M format

019-03-2004-v6
 MX5210
Transport Stream Re-multiplexer

Options

ATM AAL1 STM-1 Output

• Provides AAL1 ATM output of transport stream on STM-1 (155Mbit/s)
• Electrical interface (MX5210/HWO/OT16)
• Multimode optical interface (MX5210/HWO/OT14)
• Single Mode optical interface (MX5210/HWO/OT15)
ATM AAL5 STM-1 Output
• Provides AAL5 ATM output of transport stream on STM-1 (155Mbit/s)
• Electrical interface (MX5210/HWO/OT11)
• Multimode optical interface (MX5210/HWO/OT9)
• Single Mode optical interface (MX5210/HWO/OT10)
ATM AAL1 DVB G.703 Output
• Provides DVB compliant ATM output on G.703
• E3 (34 Mbit/s) interface (MX5210/HWO/OT7)
• DS3 (45 Mbit/s) interface (MX5210/HWO/OT8)
TANDBERG DVB G.703 Output
• Provides output of transport stream on G.703
• Highly efficient TANDBERG Television proprietary interfacing
• E3 (34 Mbit/s) interface (MX5210/HWO/OT5)
• DS3 (45 Mbit/s) interface (MX5210/HWO/OT6)
SMPTE 310 Input (MX5210/HWO/IT12)
• Allows input of transport stream in SMPTE 310M format
ATM AAL1 STM-1 Input
• Provides AAL1 ATM input for transport stream on STM-1 (155Mbit/s)
• Electrical interface (MX5210/HWO/IT16)
• Multimode optical interface (MX5210/HWO/IT14)
• Single Mode optical interface (MX5210/HWO/IT15)
ATM AAL5 STM-1 Input
• Provides AAL5 ATM input for transport stream on STM-1 (155Mbit/s)
• Electrical interface (MX5210/HWO/IT11)
• Multimode optical interface (MX5210/HWO/IT9)
• Single Mode optical interface (MX5210/HWO/IT10)
ATM AAL1 DVB G.703 Input
• Provides DVB compliant ATM input on G.703
• E3 (34 Mbit/s) interface (MX5210/HWO/IT7)
• DS3 (45 Mbit/s) interface (MX5210/HWO/IT8)
TANDBERG DVB G.703 Input
• Allows input of transport stream on G.703
• Highly efficient TANDBERG Television proprietary interfacing
• E3 (34 Mbit/s) interface (MX5210/HWO/IT5)
• DS3 (45 Mbit/s) interface (MX5210/HWO/IT6)

019-03-2004-v6
 MX5210
Transport Stream Re-multiplexer

Sample configuration:
STATUS

UPCONV.

RF TEST
RF OUT
ALARM

QAM
TS IN

RS232

IF IN
IN 1

IN 2

IN 3

IN 4

MMI
STATUS

STATUS

STATUS
QAM
TS IN

ASI OUT

ASI OUT

100BT

OUT

OUT
IN 1

IN 2

IN 3

IN 4

INPUTS DVB ASI: Multiplexing Up to 8191 output PIDs

Up to 190 Mbps Full PID remapping
4 per card By service or by component configuration
Max. 2 Input cards (8 DVB ASI Inputs)
G.703: CONTROL Front panel and keypad: Ethernet settings,
TANDBERG Protocol: 34 (E3) or 45 (DS3) Mbps device reset and configuration info.
ATM: SNMP remote control for integration in
34 (E3) or 45 (DS3) Mbps AAL-1, electrical (PDH) centralised management applications
AAL-1/AAL-5 155Mbps (STM-1), electrical/optical
SMPTE 310M PHYSICAL AND Dimensions:
POWER (W x D x H) 483 x 395 x 44mm
OUTPUTS Default output interface is DVB ASI (always active): (19” x 13.7” x 1RU)
DVB ASI: Input voltage:
Bit-rate: Up to 190 Mbps 110/240V AC
Dual mirrored ASI output (both active) Cooling:
QAM modulator Integrated fans
16, 32, 64, 128 and 256 QAM (ITUT-T J.083, Annex A)
64, and 256 QAM (ITUT-T J.083, Annex B) ENVIRONMENTAL Operating temperature: 0°C to +45°C
Max symbol rate: 7.00 Msymbols/s CONDITIONS Storage temperature: -20°C to +70°C
Annex A IF Output: 36.15MHz with 8MHz BW (-4°F to 158°F)
Annex A/B IF Output: 43.75MHz and 44MHz with 6MHz Relative humidity: 5 – 95%
BW
Full band up-converter COMPLIANCE CE marked in accordance with Low Voltage
47 – 862 MHz Directive (LVD) 73/23/EEC
G.703:
TANDBERG Protocol: 34 (E3) or 45 (DS3) Mbps
ATM:
34 (E3) or 45 (DS3) Mbps AAL-1, electrical (PDH)
AAL-1/AAL-5 155Mbps, electrical/optical
SMPTE 310M

019-03-2004-v6