Dual Counterbalance: A-VBSO-DE-30-PI 08.48.11 - X - Y - Z

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Dual counterbalance


RE 18307-72
Edition: 03.2016
A-VBSO-DE-30-PI 08.48.11 - X - Y - Z Replaces: 07.2012

Technical data
Max. operating pressure 410 bar (5945 psi)
Max. flow 60 l/min. (16 gpm)
Weight see “Dimensions”
Manifold material Zinc plated steel
Fluid Mineral oil (HL, HLP) according
DIN 51524
Fluid temperature range -30 °C to 100 (-22 to 212 °F)
Viscosity range 5 to 800 mm2/s (cSt)
Recommended degree of fluid Class 19/17/14 according to
contamination ISO 4406

Description Other technical data see data sheet 18350-50


It provides static and dynamic control of load by regulating Relief setting: at least 1.3 times the highest expected load.
the flow IN and OUT of the actuator, through ports C1 and Note: for applications outside these parameters, please consult us.
C2. This valve module includes 2 sections, each one
composed by a check and a relief valve pilot assisted by
pressure in the opposite line: the check section allows free
flow into the actuator, then holds the load against reverse
movement; with pilot pressure applied at the line across,
the pressure setting of the relief is reduced in proportion to
the stated ratio until opening and allowing controlled
reverse flow. Back-pressure at V1 or V2 is additive to the
pressure setting in all functions.

Characteristic curve
Pressure Δp

Flow Q

 RE 18307-72/03.2016, Bosch Rexroth Oil Control S.p.A.


Dimensions [mm (inches)]
2 A-VBSO-DE-30-PI | Dual counterbalance

Ordering code
08.48.11 X Y Z

Dual counterbalance SPRINGS


Adj. pressure Pres. increase Std. setting
range bar/turn Q=5 (l/min)
Pilot ratio
bar (psi) (psi/turn) bar (psi)
60-210 63 200
03 4.2 : 1 20
(870-3000) (914) (2900)
180-350 138 350
35
(2610-5000) (2001) (5000)
Pressure setting up to 410 bar: code on request.
Port sizes V1 - V2 C1 - C2
Tamper resistant cap code
02 G 3/8 G 3/8 ordering code 11.04.23.002
Mat. no. R930000752
03 G 1/2 G 1/2

Preferred types
Type Material number Type Material number
084811030220000 R930006936 084811030320000 R930006817
084811030235000 R930006445 084811030335000 R930006818

Dimensions

Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Via Leonardo da Vinci 5 forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
P.O. Box no. 5 may not be reproduced or given to third parties without its consent. The data
41015 Nonantola – Modena, Italy specified above only serve to describe the product. No statements concerning
Tel. +39 059 887 611 a certain condition or suitability for a certain application can be derived from
Fax +39 059 547 848 our information. The information given does not release the user from the
[email protected] obligation of own judgment and verification. It must be remembered that our
www.boschrexroth.com/compacthydraulics products are subject to a natural process of wear and aging. Subject to change.

Bosch Rexroth Oil Control S.p.A., RE 18307-72/03.2016

You might also like