Scribd
Upload
579 views3 pages

DC Servo Trainer: - Electrical Machine

This document describes an electrical machine DC servo trainer. It consists of modular components including a servo motor, tacho generator, speed reduction gear, and experiments modules. The modules allow experiments on transient characteristics, response, speed detection, position control, and PID control. Specifications include a speed control range of 0.01-60 RPM, position resolution of less than 3 degrees, and input voltage of AC 220V at 50-60Hz. Accessories include an inertia flywheel, brake disk, and function generator.

Uploaded by

Rudnei Barbosa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
579 views3 pages

DC Servo Trainer: - Electrical Machine

This document describes an electrical machine DC servo trainer. It consists of modular components including a servo motor, tacho generator, speed reduction gear, and experiments modules. The modules allow experiments on transient characteristics, response, speed detection, position control, and PID control. Specifications include a speed control range of 0.01-60 RPM, position resolution of less than 3 degrees, and input voltage of AC 220V at 50-60Hz. Accessories include an inertia flywheel, brake disk, and function generator.

Uploaded by

Rudnei Barbosa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1/3

• Electrical Machine
_____

DC SERVO TRAINER
• Analog Feedback Loop & DC servo system
ED-4400B
• Modularized by the function of servo circuits
• Overload protection for the Servo Amp’s and power supply’s output
• Servo Motor with Tacho Generator and Speed Reduction Gear
• PID Control Exercise [option : PID Control Module U-165]

> EXPERIMENTS
• Transient Characteristics of Servo Motor • Error Signal Detection and Closed Circuit’s Composition
• Response Characteristics • Position Control
• Speed Detection and Closed Circuit’s Composition • Closed Circuit’s Gain and Response Speed
• Steady Speed Control • Servo Circuit Applications
• Load Characteristics • PID Control(Optional)
• Position Detection and Operational Amplification

> SPECIFICATIONS

• Servo System Method : Analog Feed-back Loop, DC Servo AUXILIARY MODULES


• Circuit Composition : Modular System(10 Modules and
• Function Generator U-162 : 1ea
Motor, Electronic Brake)
• RPM Meter U-159 : 1ea
• Speed Control Range : 0.01 RPM~60 RPM
• Magnet Brake U-163 : 1ea
(Reduction Ratio 60:1)
• Position Resolution : Less than ±3˚
• Operating Temperature : 0~45˚C , Below 85% R.H. ACCESSORIES
• Input Voltage • Aluminum Brake Disk : 1ea
» Modules : ±15V, 0.6A Max.(by DC Power Supply) • Inertia Flywheel Disc : 2ea
» System : AC 220V, 50~60Hz • Patch Cord(ø4 Plug) : 1set
• Dimension • AC Power Cord : 1ea
» Modules : 110(W) x 55(H) x 110(D)mm • Experimental Manual : 1ea
» System case : 615(W x 175(H) x 470(D)mm
• System Weight : 18.2kg OPTION
• PID Control Module U-165

www.abacantodigital.com
2/3
• Electrical Machine
_____

DC SERVO TRAINER ED-4400B


PART1

Experiments Module

U-151 The dual rotary type attenuator consists of 10 steps and


each step reduces by 10%.
Attenuator • Input Resistance : 10kΩ x 10=100kΩ
• Attenuation : 10% x 10=100%

U-152 Performs add-up operations for the current of three


circuits and experiments on the gain and transfer
Summing Amp characteristics.
• Input Circuit : 3-input analog summing
• Delay : Int./Ext.

U-153 Designed to control DC offset voltage; and can control


DC zero offset coming from the DC Amplifier.
Pre-Amp • Offset Range : Approx. ±5V
• Gain : 20dB

U-154 This 10W DC differential amplifier has overload


protection circuits and drives the Servo Motor.
Motor Drive-Amp • Output Power : 15V 700mA Max.
• Gain : 34dB Current Amp.

U-155 Changes the tacho generator’s output in frequency-to-


conversion and makes the RPM proportional DC voltage
Tacho Detector polarized in (+) or (-) output along the motor’s rotational
direction.
• Input : AC 1~1200Hz, 0~3V
• Output : DC ±0~15V
• Polarity Sensitivity : Less than 0.1V

www.abacantodigital.com
3/3

_____

DC SERVO TRAINER ED-4400B

PART1
U-156 Supplies power to the Servo Motor and other systems
with overprotected DC outputs. The mounted ammeter
Power Supply shows current status of the motor’s load.
• Output
» ±15V 0.2A(for modules)
» ±15V 0.5A(for motor)
• Protection : Overload and short circuit protection
• Input Voltage : AC 220V, 50/60Hz

U-157/U-158 The 360˚ rotary scales are mounted on this precision


potentiometer for position setup and detection.
Potentiometer • Input Resistance : 1⁄10kΩ
• Input Voltage : 30V Max.
• Resolution : Less than 1/1000 Division
• Power Dissipation : 2W at 25˚C

U-159 This RPM Meter is used together with U-155 Tacho


Detector, and it indicates the Servo Motor’s RPM along
RPM Meter the output of Tacho Detector.
• Max. Indication : 4000 RPM
• Input Impedance : Approx. 150kΩ

U-161 Consists of the speed reduction gear and the tacho


generator.
DC Servo Motor • Input Voltage : DC 12V, 4.5W Max.
• Tacho Output : about 3Vp-p(at 4000RPM)
• RPM : 5000 Max.
• Gear Ratio : 60:1 Down Speed

U-162 Generates Square Wave for experiments on the motor’s


response speed and transient characteristics. Also, it
Function Generator provides Ramp outputs for timing axis.
• Frequency Range : 0.1~1Hz, 1~10Hz
• Output : DC 15Vp-p

U-163 The Magnet Brake has rotational load by eddy currents


presented to the aluminum rotational disk which is
Magnet Brake mounted on the motor’s high speed axis.
• Magnet Power : 5~500AT variable
• Magnet Air-gap : 4mm
• Input Voltage : AC 220V, 50/60Hz

www.abacantodigital.com

You might also like