Scribd
Upload
105 views3 pages

Butterfly Valve PN 16 Comparative Analysis

This document outlines technical specifications for butterfly valves with diameters of 300mm and above. It lists 14 specifications that the valves must meet, including requirements for the body, stem, discs, seat and liner, flange ends, operation, protection coating, testing, effects of coating, manufactured specification, and certification of the manufacturer. The manufacturer must submit documentation showing the valves meet the appropriate international standards for each specification point.

Uploaded by

talatzahoor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
105 views3 pages

Butterfly Valve PN 16 Comparative Analysis

This document outlines technical specifications for butterfly valves with diameters of 300mm and above. It lists 14 specifications that the valves must meet, including requirements for the body, stem, discs, seat and liner, flange ends, operation, protection coating, testing, effects of coating, manufactured specification, and certification of the manufacturer. The manufacturer must submit documentation showing the valves meet the appropriate international standards for each specification point.

Uploaded by

talatzahoor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

The General Directorate for Water in Riyadh Region

Manufacturer
BUTTERFLY VALVES (Diameter 300mm and above)
Model: xxxxx PN 16
xxxxxxx
DESCRIPTION MOWE Technical Specification xxxxxxxxx REMARKS
1 Specification and - All Mechanical and Electrical equipment and
Place of instruments shall be made by local
Production of industries or European or American or
Product in Japanese industries approved by the
Comparative Ministry and according to any of the
Statement following international standard
specification (i.e. BS, ISO, DIN, EN and
AWWA)
Special Condition of Contract, Article No. 10
(General Specification)
2 Body - Ductile Cast Iron GGG40.

Part 4, Section 4.04.2, B.2.


3 Stem/Shaft - Anti-corrosion Cast Iron (Stainless steel
Type 304, Minimum of 18% Chromium).
Part 4, Section 4.04.2, B.2.
4 Extension Spindle - Shall be Stainless Type 420 (Hardened
Stainless Steel with 14% chrome content).

Part 4, Section 4.04.06, A4.


Page 1 of 3
5 Discs/ Plate
i. Installation i. Fixed plate type, not coaxial with the
stem.

ii. Material ii. To EN 593 5.1.2.2 – Metallic discs should


have corrosion resistant coating.
Part 4, Section 4.04.2, B.1 & B.2.
6 Seat & Liner - To EN 593 (EPDM)

Part 4, Section 4.04.2, B.1.


7 Flange Ends - To DIN 2501 or equivalent

Part 4, Section 4.04.2, B.2.


8 Valve Length - DIN 3202 F4 series 14 & EN 558-1 or
equivalent.

Part 4, Section 4.04.2, B.2.


9 Operation - Hand wheel via Gear Box mounted on the
valve.

Part 4, Section 4.04.2, B.2 & B.3.


10 Protection - Epoxy Coating with a thickness not less
(Internal & than 250 microns
External) (FBE Coating to DIN 30677-2).
Requires a copy of GSK Certificate

Part 4, Section 4.04.2, B.4.


11 Test - Factory Tested 1.5 times working pressure
for body, 1.1 times working pressure for
gaskets, DIN 3230 or EN 12266.
(Requires a copy of Test Report)

Part 4, Section 4.04.2.


Page 2 of 3
12 Effects of Coating ISO 2531-Material in contact with hot water
over Ductile Iron intended for human consumption.
and EPDM, over (Requires a copy of Certificate)
Water Quality,
Validity of
Certificate &
Temperature
Requirement
13 Manufactured - EN 593 Specification or equivalent.
Specification
Part 4, Section 4.04.2, B.1.
14 ISO/ BS Certified Part 4, Section 4.02.4, H.1.
Manufacturer (Requires a copy of Certificate)

Note 1: Manufacturer is required to submit the Standards adopted in the Product.


Note 2: Every statement written in the Comparative Statement should be clearly mentioned in the catalogue.
Incomplete Catalogue will lead to unacceptability of the material.

Page 3 of 3

You might also like