Unit 37: Refrigeration Technology in Building Services Engineering

Download as pdf or txt
Download as pdf or txt
You are on page 1of 17

Unit 37: Refrigeration Technology in

Building Services Engineering


Unit code: T/600/0459
QCF Level 3: BTEC Nationals
Credit value: 10
Guided learning hours: 60

Aim and purpose

This unit develops an understanding of the principles, properties, technical and operational requirements
of refrigeration systems, a knowledge of relevant legislation, and the skills needed to create design proposals
for system installations.

Unit introduction

Modern refrigeration has many applications including the safe preservation of medicine, blood and food.
However, within construction and the built environment, refrigeration technology is also widely used in air
conditioning systems for the maintenance of human comfort.
People nowadays expect to live and work in a comfortable environment. Climate change threatens us all.
These issues have created a demand for skilled refrigeration design engineers and technicians.
Building services design engineers and technicians must comply with the increasingly demanding requirements
of the Environment Agency. They must also keep up to date with the latest developments in refrigeration
and air conditioning technology. It is therefore increasingly important that they can apply a fundamental
underpinning knowledge and understanding of refrigeration to their design proposals.
This unit introduces learners to the study of the thermodynamic properties of refrigerants and to the basic
calculations used to determine the capacities of each of the components used in the single-stage refrigeration cycle.
The unit focuses on linking scientific principles with practical refrigeration applications and learners will require
a basic understanding of the associated science, technology and mathematics contained in other units. It is
anticipated that learners will either have achieved these units before studying this unit, or will be studying
those units concurrently.

Learning outcomes
On completion of this unit a learner should:
1 Understand the principles that underpin basic refrigeration processes
2 Understand the properties and uses of different types of refrigeration systems
3 Be able to create project design proposals for selecting appropriate refrigeration technology
4 Understand the technical and operational requirements of safe, energy efficient system installation
5 Know the current legislation, British Standards, regulations and codes of practice applicable to safe
refrigeration processes.

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
1
Unit content

1 Understand the principles that underpin basic refrigeration processes


Principles of thermodynamics: temperature scales (Celsius; Kelvin); gas laws (Dalton’s Law; Boyle’s Law;
Charles’s Law; general gas law); heat transfer; removal of heat by refrigeration processes; data tables for
enthalpy; sensible and latent heat; boiling point of liquids; room temperatures; discharge and comfort
temperatures; coil temperatures; storage temperatures; suction and condensing temperatures; transient
heat flow; two-phase heat transfer; dew point and wet bulb temperatures
Principles of refrigeration cycles: basic vapour compression cycle; evaporation and condensation of liquids;
coefficient of performance; ideal reversed Carnot cycle; modified reversed Carnot cycle; use of pressure-
enthalpy diagrams; volumetric efficiency; multi-stage cycles; absorption cycle; air cycle; working fluid
condition throughout the refrigeration and air conditioning cycles

2 Understand the properties and uses of different types of refrigeration systems


Refrigerants: characteristics; applications; operational features; legislation relevant to use of certain types
of refrigerant; environmental impact (ozone layer and depletion potential; global warming potential);
refrigerants currently in use; ideal properties of refrigerants such as ammonia and hydrocarbons; refrigerant
blends; lubricants; transport handling and distribution; criteria for selection
Components: compressors; condensers; water towers; receivers; dry coolers; evaporators; expansion valves
Compressors: characteristics; applications; operational features; capacity ratings as applied to the vapour
compression cycle; history of positive displacement (piston type); multi-cylinder type compressors,
construction and use; valve types and applications; sliding and rotary vane compressors; screw
compressors; scroll compressors; dynamic compressors; criteria for selection
Condensers and water towers: characteristics; applications; operational features; condenser capacities and
manufacturers’ equipment cooling capacities; rating and sizing; use of data tables; air cooled condensers;
construction and materials used in manufacture; liquefied refrigerant and air flows; natural and forced
convection methods; water cooled condensers; typical configurations and sizes; efficiencies and adaptability;
shell and tube condensers; cooling towers; evaporation processes and water quantities; issues with spray
vapour; evaporative condensers; atmospheric condensers; winter operation factors that are commonly
applied to condensers; heat pump or heat reclaim systems; criteria for selection
Receivers: characteristics; applications; operational features; holding capacities; materials used; pressure
vessels; requirement for safety pressure relief devices; criteria for selection
Dry coolers: characteristics; applications; operational features; use; criteria for selection
Evaporators: characteristics; applications; operational features; flow patterns and function; flooded
evaporators; plate evaporators; methods and requirements for defrosting; shell and tube evaporators;
shell and coil evaporators; air cooling; liquid cooling; performance; efficiencies; materials used in manufacture;
configuration of typical models; floor or ceiling mounted; dry expansion methods; advantages and criteria
for selection; requirements for condensate pumps and drainage of condensate water
Expansion valves: characteristics; applications; operational features; importance and function of expansion
valves in refrigeration systems; methods used in pressure reduction; low pressure float valves and switches;
high pressure float valves; purpose and use of thermostatic level control; valves for dry expansion circuits;
detection of superheat method of operation; correct selection and installation to avoid undamped
proportional control; electronic expansion valve use in packaged, automatic units/systems and field use;
use of thermistors to sense superheat with pulsing or modulation solenoid valve for final control as an
integrated control unit

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


2 – Issue 1 – January 2010 © Edexcel Limited 2009
3 Be able to create project design proposals for selecting appropriate refrigeration
technology
Design principles: refrigeration load estimation; load sources; removal of heat; consideration of all heat
sources; consideration of sensible and latent heat gains from relevant sources; conducted heat; convected
heat; internal heat sources; heat of respiration; estimate analysis; use of quantitative data; selection of
design parameters; effects on human comfort and climate conditions; environmental design parameters;
provision of suitable layout drawings and flow diagrams; control and wiring circuits
Calculations: requirements for air conditioning and comfort cooling; winter heating via heat pumps;
sensible and latent cooling; adiabatic cooling/saturation cooling and dehumidifying coils; sensible-latent
heat ratio; evaporative coolers; running time for refrigeration plant to overcome given cooling loads
Refrigeration-based air conditioning systems: characteristics; applications; operational features; importance
and function of different types of air conditioning systems that use refrigeration to provide both heating
and cooling; all air systems using centralised plant and ductwork with associated cooling coils in air handling
equipment; direct expansion systems supplied with refrigerant from a central plant room; chilled water
air handling unit taking chilled water from a central chiller; water cooled, packaged, direct expansion
units using condenser water from an external tower; remote condenser (single split) air-cooled direct
expansion unit; air-cooled direct expansion unit local to indoor unit; packaged air cooling units; two
and three pipe split units; multi-split VRF units; criteria for selection

4 Understand the technical and operational requirements of safe, energy efficient


system installation
Materials: use of standard engineering materials for refrigeration plant and equipment eg copper, (special
requirements for compressors and compressor pistons); stainless steel or mild steel for piping systems;
aluminium tube for ammonia
Instruments: permanently fixed instruments (pressure gauges; thermometers; electronic thermocouples);
locations; use (initial commissioning; final commissioning; ongoing system maintenance); use of manometers
across air filters where applicable
Operational methods: piping layout; pipe supports; vibration control; site pressure safety tests; evacuation;
charging system; insulation; commissioning
Piping layouts: characteristics; applications; operational features; correct sizing and routing of pipe
work systems; pipe joining methods for steel and copper; flanged and welded steel pipe work for larger
commercial systems; mechanical joints for copper tube; flare type joints with annealed tube; brazing
of copper tube; using copper tube on rolls to minimise jointing; attention to detail for evaporator and
condenser positions above and below the compressor with relevant gravity falls and taps as required
for oil return
Pipe supports: frequency of supports required limiting stress and deflection; allowances for expansion
and contraction; limit damage and use access as footholds; blocking access to isolation valves; various
types available for different sizes of installation
Vibration control: use of anti-vibration mounts for machinery; use of braided flexible connectors for pipe
work connections
Site pressure safety tests: necessity for pressure tests on completed installations; checks for factory tested
components and pressure vessels; use and supply of nitrogen and relevant pressures to test installation
eg gauges used to test pressure, vented during pressure tests, checking and operation of system valves
during pressure testing, maintenance time for the pressure test

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
3
Evacuation: principles of evacuation; removal of air and moisture from pipe work system; operating
temperatures of refrigerants and absolute pressures; use of vacuum pump and expansion valves for
connection; final working pressures purging system of air; automatic gas purgers
Charging system: operational procedures for charging system with refrigerant as a liquid; allowance of
refrigerant for systems with receivers and changes in seasonal loads; checking charging weights for small
systems; replenishing of oil in system; checking sight glasses
Insulation: application of insulating material to low pressure pipe work and materials currently available;
methods of application to pipe work and/or equipment where necessary; elimination of air and moisture;
creating a vapour barrier; sealing of joints; use of specialist trades for application
Commissioning: completion stage of contract; checking design specification requirements; setting to work
procedures and logical sequence of events; calibration and final checks; commissioning records

5 Know the current legislation, British Standards, regulations and codes of practice
applicable to safe refrigeration processes
Regulations: BS 4434:1989, BS 5720:1979 (no longer current but still cited in Building Regulations);
DD 9999:2005; BS EN 378-2:2000; BS EN 378-1:2000; BS 5422:1990; BS 6880-1:1988; BS 6880-2:
1988; Building Regulations 2000; Approved Document L2; all currently revised standards and regulations
as applicable
Legislation: importance of health and safety standards; current and applicable legislation under the Health
and Safety at Work Act (1974); implications of breaches of applicable laws; adherence to national and
international protocols and environmental legislation relating to the use, provision and handling of
refrigerants; requirements for training qualified and competent personnel for installation, commissioning
and testing procedures
Codes of practice and other references: relevance and application of information contained within
eg Institute of Refrigeration Safety Codes for Refrigerating Systems utilising groups of HCFC/HFC and
hydrocarbons, (A1, A2, A3) type refrigerants, minimisation of refrigerant emissions, use of all relevant
CIBSE Guides and Commissioning codes, Code of Practice for Compression Refrigerating Systems using
Ammonia 1, use of current HVCA guides and ASHRAE Handbooks, use of BRE documents for energy
and efficient designs
Safety: safe installation and use of electrical plant and equipment (preventing electrical shock; earthing
requirements; fuses; safety devices); storage and handling of gas cylinders; use and correct application
of dangerous and flammable chemicals eg oil, solvents, spilt mercury; disposal of waste chemicals; manual
handling and lifting of plant and equipment; hazard warning and identification; first aid; correct operational,
installation and testing procedures; personal protective equipment

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


4 – Issue 1 – January 2010 © Edexcel Limited 2009
Assessment and grading criteria
In order to pass this unit, the evidence that the learner presents for assessment needs to demonstrate that
they can meet all the learning outcomes for the unit. The assessment criteria for a pass grade describe the
level of achievement required to pass this unit.

Assessment and grading criteria


To achieve a pass grade the To achieve a merit grade the To achieve a distinction grade
evidence must show that the evidence must show that, in the evidence must show that,
learner is able to: addition to the pass criteria, in addition to the pass and
the learner is able to: merit criteria, the learner is
able to:
P1 describe the principles of M1 analyse how refrigeration
thermodynamics applicable cycles work
to refrigeration
[IE1, IE2, IE4, IE6]
P2 explain the principles
of refrigeration cycles
[IE1, IE2, IE4, IE6, RL6]
P3 compare modern refrigerants
in terms of how they achieve
the criteria required of
modern refrigeration systems
[IE1, IE2, IE4, IE6, CT1,
CT2, CT6, RL5, RL6]
P4 explain how the principal
components of refrigeration
systems are configured to
achieve their design purpose
[IE1, IE2, IE4, IE6, CT1,
CT2, RL5, RL6, SM3]
P5 use appropriate design M2 produce a schedule of D1 justify the specification of
principles and relevant the plant and equipment modern refrigerants and
calculations to determine required for two proposed modern refrigeration systems
sensible and latent heat air conditioning systems in terms of performance-in-use
gains for two proposed and cost
air conditioning systems
[IE1, IE2, IE4, IE6, CT1,
CT2, RL5, RL6, SM3]
P6 produce specifications
for refrigeration-based
air conditioning for two
proposed air conditioning
systems
[IE1, IE2, IE4, IE6, CT1,
CT2, RL5, RL6, SM3]

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
5
Assessment and grading criteria
To achieve a pass grade the To achieve a merit grade the To achieve a distinction grade
evidence must show that the evidence must show that, in the evidence must show that,
learner is able to: addition to the pass criteria, in addition to the pass and
the learner is able to: merit criteria, the learner is
able to:
P7 compare the materials M3 evaluate the materials, D2 justify emerging national
and instruments used in equipment and methods and international legislation
the installation, testing and used in a typical refrigeration and protocols in terms of
commissioning of typical systems in terms of current the environmental impact
refrigeration systems legislation. of refrigeration technology.
[IE1, IE2, IE4, IE6, CT1,
CT2, RL5, RL6, SM3]
P8 discuss the methods used
to install, test and commission
a typical refrigeration system
[IE1, IE2, IE4, IE6, CT1,
CT2, RL5, RL6, TW2, SM3]
P9 describe the important
requirements of the
current regulations,
legislation and codes
of practice applicable
to safety aspects of
refrigeration systems.
[IE1, IE2, IE4, IE6, CT1,
CT2, RL5, RL6, SM3]

PLTS: This summary references where applicable, in the square brackets, the elements of the personal,
learning and thinking skills which are embedded in the assessment of this unit. By achieving the criteria,
learners will have demonstrated effective application of the referenced elements of the skills.

Key IE – independent enquirers RL – reflective learners SM – self-managers


CT – creative thinkers TW – team workers EP – effective participators

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


6 – Issue 1 – January 2010 © Edexcel Limited 2009
Essential guidance for tutors

Delivery
Tutors delivering this unit have opportunities to use a wide range of techniques. Lectures, discussions, seminar
presentations, site visits, supervised practicals, research using the internet and/or library resources and use
of personal and/or industrial experience are all suitable. Delivery should stimulate, motivate, educate and
enthuse learners. Visiting expert speakers could add to the relevance of the subject.
It is important to ensure that learners are aware of the planned and progressive structure that exists across
the learning outcomes. Before the next step in the learning process can be taken, learners should achieve
the knowledge and understanding from the previous learning outcome. There may be instances where learners
have gained adequate knowledge and experience previously but this should be determined through assessment.
Learners should clearly appreciate that each aspect and topic form a stage in the overall process of designing
and specifying refrigeration plant and equipment and associated installations.
The unit focuses on refrigeration within the context of air conditioning and does not deal explicitly with the
application of refrigeration technology in relation to cold stores or food and product storage. However, the
underlying principles of the thermodynamic and refrigeration processes are much the same and could be
applied to this area of design.
This unit should not be seen as an academic exercise. It should be based on real-life applications and should
reflect industry best practice. The method of delivery should, as far as possible, be activity based and use learning
activities that include laboratory work, case studies, site visits, product investigations, and design exercises.
The delivery process should balance calculations, knowledge, understanding, creativity and application.
Appropriate attention should be paid to health, safety and welfare requirements.
Learners should be encouraged to refer to documents such as CIBSE guides, ASHRAE handbooks, codes
of practice, British Standards and Building Regulations, to gain knowledge of a wide and confirmed range
of advice on best practices for design and installation requirements. The use of manufacturers’ current
product information is also encouraged to help learners apply the principles and procedures that would
be used in industry.
Emphasis on the need for learners to understand how to access and use particular charts and diagrams to
aid manual calculations is very important. Industry-standard software can be used to perform certain design
functions in the process of assembling a project. However, it is important that learners can challenge any
results gained from the software by carrying out either ‘rule of thumb’ or longhand manual calculations.
The unit links principles with practical applications and this means that learners should have achieved a
basic understanding of any relevant science and mathematics before starting this unit. This should include
the underlying principles of thermal comfort, heat transfer, processes that harm the natural environment,
psychrometric properties of moist air, flow of fluids, and control principles and strategies for building
engineering services.
Group activities are permissible, but tutors will need to ensure that individual learners have equal experiential
and assessment opportunities.
Health, safety and welfare issues are paramount and should be reinforced through close
supervision of all workshops and activity areas, and risk assessments must be undertaken
before practical activities are taken. Centres are advised to read the Delivery approach
section in the specification, and Annexe H: Provision and Use of Work Equipment
Regulations 1998 (PUWER).

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
7
Outline learning plan
The outline learning plan has been included in this unit as guidance and can be used in conjunction with
the programme of suggested assignments.
The outline learning plan demonstrates one way in planning the delivery and assessment of this unit.

Topic and suggested assignments/activities and/assessment


Introduction by tutor
Tutor-led discussion of principles of thermodynamics and refrigeration cycles
Learners to carry out practical work on basic principles where equipment is available Demonstrations by the
tutor and the use of secondary sources of equipment are acceptable as is the use of relevant audio-visual aids
Tutor-led session on the criteria for refrigerants and issues associated with their use.
Small-group exercise with each group being given one refrigerant to research and explore the properties. These
should include modern refrigerants and discredited CFCs. Each group to present their findings to the whole-
class, with guidance and summary by the tutor.
Tutor-led session on the characteristics and uses of refrigeration system components.
Small-group exercise with each group being given one type of component to research. These should include
compressors; condensers; water towers; receivers; dry coolers; evaporators; expansion valves. Each group
to present their findings to the whole-class with guidance and summary by the tutor
Site visit to component manufacturer, building services merchant and refrigeration installations, either under
production or installed, tested and commissioned, as appropriate and as available
Assignment 1: Thermodynamics, Refrigeration Cycles, Refrigerants and Components
Extended tutor input on technical aspects of design, use of calculations and drawings.
Individual learner research into characteristics of available systems using the internet.
Learners to practise design calculations and drawings under close supervision from the tutor. Tutor to comment,
suggest, amend, praise and redirect learners as appropriate.
Assignment 2: Design of Refrigeration Systems
Presentation by visiting speaker from the refrigeration technology sector
Tutor-led, whole-class session on installation techniques. Emphasis on health and safety
Visit to installation work in progress, use college workshops where access is available
Individual learner research into specified legislation, file sharing and group discussion
Whole-class session to collate findings, guidance and commentary by tutor
Assignment 3: Installing, Testing and Commissioning Refrigeration Systems
Review of unit and assignment feedback

Assessment
Evidence for this unit may be gathered from a variety of sources, including well-planned investigative
assignments, case studies or reports of practical assignments.
There are many suitable forms of assessment that could be used, and tutors are encouraged to consider
and adopt these where appropriate. Some example assessment approaches are suggested below. However,
these are not intended to be prescriptive or restrictive, and are provided as an illustration of the alternative
forms of assessment evidence that would be acceptable.

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


8 – Issue 1 – January 2010 © Edexcel Limited 2009
Some criteria can be assessed directly by the tutor during practical activities. If this approach is used then suitable
evidence would be observation records or witness statements.
The unit allows for flexibility in the types of assessment methods that can be used throughout. Certain criteria,
however, require well-planned laboratory work, assignments that involve calculations, diagrams and text, or
design project work.
The fundamental principles of the refrigeration processes are often best witnessed and demonstrated in order
for learners to see the effects and results. Experiments in a laboratory to demonstrate different processes and the
use of equipment could be carried out by learners with evidence for formative and summative assessments
presented as a combination of a visual record by the tutor and preparation and maintenance of suitable
learner logbooks. Learners could also provide work-based evidence for assessment provided that this is
appropriate and authenticated as the learner’s own work.
Any buildings selected to support assignments should be typical of those encountered and designed in industry
so that they can be related to normal practice in the workplace. They should have a variety of spaces and areas
with differing requirements to stimulate learners’ thinking. They should be capable of being air conditioned
using the option of stand-alone refrigeration systems or plant and equipment that is integrated into larger
centralised systems.
Learners should, preferably, be given a range of the architectural drawings they need to extract the required
information including plans, elevations, sections and details. If centres want to use a building of their own design,
it should meet current building design standards and contain the same information as would be expected from
professionally produced architectural drawings.
To achieve a pass grade learners must meet the nine pass criteria listed in the grading grid.
For P1, learners must describe the principles of thermodynamics relevant to the general uses of refrigeration.
Learners will calculate the differences in moisture in given quantities of air and be familiar with the processes
of evaporation and condensation of water. They must also identify how different thermodynamic laws relate
to the provision of refrigeration technology. Evidence could be in the form of a presentation and/or a report,
supported by standard charts and graphs and appropriate calculations.
For P2, learners must explain the principles of refrigeration cycles. They are expected to identify the different
behaviour of liquid and vapours under different situations and the processes and phases that refrigerants
undergo during the removal of heat. Evidence should be as for P1.
For P3, learners must compare modern refrigerants in terms of how they achieve the performance required
of modern refrigeration systems. Learners are expected to identify the refrigerants currently used in air
conditioning systems and discuss their advantages and disadvantages. Learners are expected to determine
the refrigerants that meet current environmental standards and protocols. They should also discuss the
reasons why certain refrigerants are either no longer viable options for use at all or are only suitable in certain
types of systems. Evidence could be in the form of a presentation, a report or through oral questioning.
For P4, learners must explain how the principal components of refrigeration systems are configured to achieve
their design purpose. Learners need to produce diagrams, sketches and descriptions of the components
and discuss their location, function and features in systems and how they assist in providing solutions for air
conditioning. They must provide evidence of having considered environmental issues and health, safety and
welfare aspects. Suitable evidence could be as for P1 and P3.
For P5, learners must use appropriate design principles and relevant calculations to determine sensible and
latent heat gains for two different building locations requiring air conditioning. The buildings should have quite
different requirements that learners are expected to consider in order to develop a brief. They should be
able to use given data on heat loads, and/or assess other incidental heat loads that may be present, in order
to manually calculate sensible and latent heat gains. This could be used as an integral part of a design project.
Suitable evidence could be a report supported by text, diagrams, sketches, drawings, specifications and
schedules as appropriate.

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
9
For P6, learners must produce specifications for two refrigeration-based air conditioning systems for
simple buildings. They must assemble a full design proposal for the provision of the air conditioning systems,
incorporating refrigeration technology in any form that they feel is applicable for the chosen situation. This
will include the creation of layout drawings to indicate the system proposals, plant and equipment schedules,
pipe work routes and plant and equipment detail drawings. This could be used as an integral part of a design
project. Evidence could take the same form as P5 and build on the evidence.
For P7, learners must compare the materials and instruments used to install, test and commission typical
refrigeration systems. They are expected to prepare an outline installation specification for the design proposal
created in P6, detailing all the materials and ancillary equipment needed for onsite installation.
For P8, learners must discuss the methods used to install, test and commission a given refrigeration system.
This should be provided by the tutor and should not relate to P6 and P7. Evidence could be in the form
of a written report.
For P9, learners must describe the most important requirements of current regulations, legislation and codes
of practice related to the safe design, installation and use of refrigeration systems and all associated substances.
They are expected to identify the main documents that detail the important legislation, regulations and codes
of practice relevant to refrigeration. Learners must show their understanding of the implications of these
requirements for the designer, installer and end user, in terms of the environment, financial cost and personal
health and safety.
To achieve a merit grade learners must meet all the pass grade criteria and the three merit grade criteria.
For M1, learners must analyse how the refrigeration cycle works and explain and illustrate the thermodynamic
changes within the working during the operation of the cycle and its variants. This could be through written
descriptions about the actual processes of the gases and liquids. They should use clear diagrams to indicate
the various cycles that exist and the components used to create the cycles. Learners will be able to build
and expand on knowledge gained for P1.
For M2, learners must produce a schedule of the plant and equipment required for two proposed air conditioning
systems. This could build on the evidence required for P5.
For M3, learners must evaluate the materials, equipment and methods used in a typical refrigeration system
in terms of current legislation. This should relate closely to the evidence produced for P9.
To achieve a distinction grade learners must meet all of the pass and merit grade criteria and the two distinction
grade criteria.
For D1, learners must justify the specification of modern refrigerants and modern refrigeration systems
in terms of performance-in-use and cost. The costs need not be absolute and relative costs are acceptable.
Performance-in-use should be discussed in terms of these costs.
For D2, learners must justify the impact of emerging national and international legislation and protocols.
They should relate this to the impact on designers, installers and end users in terms of the intended impact
on design choices and on environmental issues such as global warming and ozone depletion.

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


10 – Issue 1 – January 2010 © Edexcel Limited 2009
Programme of suggested assignments
The following table shows a programme of suggested assignments that cover the pass, merit and distinction
criteria in the grading grid. This is for guidance and it is recommended that centres either write their own
assignments or adapt any Edexcel assignments to meet local needs and resources.

Criteria covered Assignment title Scenario Assessment method


P1, P2, P3, P4, M1 Thermodynamics, A client is keen to understand A presentation supported
Refrigeration Cycles, the principles behind the by a report to include text,
Refrigerants and refrigeration technology your calculations, diagrams,
Components firm has proposed. You have charts, graphs and tables
been given the job of compiling as appropriate.
a presentation to address the
client’s request.
P5, P6, M2, D1 Design of Refrigeration Your firm asks you to A report to include
Systems produce a design solution text, diagrams, sketches,
for an air-conditioning system drawings, specifications and
for a non-complex low-rise schedules as appropriate.
building.
P7, P8, P9, M3, D2 Installing, Testing Your firm tasks you with the A report to include a
and Commissioning post-design production phase text, diagrams, sketches,
Refrigeration Systems of the design solution produced drawings, specifications and
for the above. schedules as appropriate.

Links to National Occupational Standards, other BTEC units, other BTEC


qualifications and other relevant units and qualifications
This unit forms part of the BTEC Construction and the Built Environment sector suite. This unit has particular
links with the following unit titles in the Construction and the Built Environment suite:

Level 1 Level 2 Level 3


Building Services Science
Electrical Principles in Building
Services Engineering

● This unit links to the Edexcel Level 3 Technical and Professional NVQs for Construction and the Built
Environment.
● The contents of this unit covers some of the knowledge and understanding associated with SummitSkills
National Occupational Standards, particularly Unit 008: Design RAC systems – small commercial
refrigeration and air conditioning systems.
● The content of this unit covers some of the knowledge and understanding associated with Summit Skills
N/SVQ Level 3: Building Services Engineering Technology and Project Management, particularly, Unit
SST/NOS 3: Apply Design Principles to Building Services Engineering Projects, Unit SST/NOS 5: Monitor
Commissioning and Testing Procedures for Building Services Engineering Projects and Unit SST/NOS 7:
Provide Technical and Functional Information to Relevant People.

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
11
● The content of this unit will also provide a developmental stage in acquiring some of the knowledge and
understanding associated with Summit Skills N/SVQ Level 4 Building Services Engineering Technology
and Project Management, particularly SSTE/NOS 7: Prepare and Advise on Building Services Engineering
Project Design Recommendations and SSTE/NOS 8: Prepare and Agree Detailed Building Services
Engineering Project Designs.

Essential resources
Centres should have access to a wide range of current hard copy or online technical and manufacturers’
literature. The availability of visual aids, such as the range of refrigeration plant and components indicated
for learning outcome 2 is considered advantageous. These can be in the form of models but preferably
should be part of live installations. Centres should have access to sets of architectural drawings, refrigeration
system installations and schematic drawings to support the learning process and facilitate assessment. Where
these drawings are used as part of the assessment process it is recommended that repeated use of the same
building is avoided to maintain the freshness and validity of the assessment process. Learners should be made
familiar with industry-recognised software used to size, select and specify pipework, plant and equipment.
It is vital, however, that if such software is used, learners can complete the calculations required using
recognised manual procedures.

Employer engagement and vocational contexts


Support to enable centres to initiate and establish links to industry, and to networks arranging visits to industry
and from property practitioners is given below:
● Learning and Skills Network – www.vocationallearning.org.uk
● National Education and Business Partnership Network – www.nebpn.org
● The Royal Institution of Chartered Surveyors – www.rics.org
● Work Experience/Workplace learning frameworks – Centre for Education and Industry (CEI University
of Warwick) – www.warwick.ac.uk/wie/cei/

Indicative reading for learners


Textbooks
Chadderton D – Air Conditioning: A Practical Introduction, 2nd Edition (Spon Press, 1999) ISBN 0419226109
Chadderton D – Building Services Engineering, 5th Edition (Taylor & Francis, 2007) ISBN 0415413559
Chartered Institute of Building Services Engineers – Energy Efficiency in Buildings (CIBSE, 2006) ISBN 1903287340
Chartered Institute of Building Services Engineers – Environmental Design, 7th Edition (CIBSE, 2006)
ISBN 1903287669
Chartered Institute of Building Services Engineers – Ventilation and Air Conditioning (CIBSE, 2001)
ISBN 1903287162
Cook N – Refrigeration and Air-conditioning Technology (Macmillan Education, 1995) ISBN 0333609581
Kaminski D and Jensen M – Introduction to Thermal and Fluid Engineering (John Wiley & Sons, 2004)
ISBN 0471268739
Martin P, Oughton D and Hodkinson S – Faber and Kell’s Heating and Air-conditioning of Buildings, 9th Edition
(Architectural Press, 2001) ISBN 075064642X
Trott A and Welch T – Refrigeration and Air Conditioning, 3rd Edition (Butterworth-Heinemann, 1999)
ISBN 075064219X

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


12 – Issue 1 – January 2010 © Edexcel Limited 2009
Journals
ACR News – Faversham House press
ACR Today: Air Conditioning and Refrigeration for Today’s People – Battlepress
Refrigeration and Air Conditioning Magazine – Emap
Websites
www.cibse.org Chartered Institution of Building Services Engineers
www.hvca.org.uk Heating and Ventilation Contractors’ Association
www.ior.org.uk Institute of Refrigeration
www.summitskills.org.uk SummitSkills

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
13
Delivery of personal, learning and thinking skills (PLTS)
The following table below identifies the personal, learning and thinking skills (PLTS) opportunities that have
been included within the assessment criteria of this unit.

Skill When learners are …


Independent enquirers identifying questions to answer and problems to resolve, planning and carrying out
research, analysing and evaluating information and supporting conclusions using
reasoned arguments and evidence, as they:
● describe the principles of thermodynamics applicable to refrigeration
● explain the principles of refrigeration cycles
● compare modern refrigerants in terms of how they achieve the criteria
required of modern refrigeration systems
● evaluate the principal components of refrigeration systems in terms of how
they are configured to achieve their design purpose
● determine sensible and latent heat gains for two proposed air conditioning
systems using appropriate design principles and relevant calculations
● specify refrigeration-based air conditioning for two proposed air conditioning
systems
● compare the materials and instruments used in the installation, testing and
commissioning of typical refrigeration systems
● discuss the methods used to install, test and commission a typical
refrigeration system
● describe the important requirements of the current regulations, legislation
and codes of practice applicable to refrigeration systems
Creative thinkers generating ideas and exploring possibilities, asking questions to extend their
thinking and adapting ideas as circumstances change, as they:
● compare modern refrigerants in terms of how they achieve the criteria
required of modern refrigeration systems
● evaluate the principal components of refrigeration systems in terms of how
they are configured to achieve their design purpose
● determine sensible and latent heat gains for two proposed air conditioning
systems using appropriate design principles and relevant calculations
● specify refrigeration-based air conditioning for two proposed air conditioning
systems
● compare the materials and instruments used in the installation, testing
and commissioning of typical refrigeration systems
● discuss the methods used to install, test and commission a typical
refrigeration system
● describe the important requirements of the current regulations, legislation
and codes of practice applicable to refrigeration systems

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


14 – Issue 1 – January 2010 © Edexcel Limited 2009
Skill When learners are …
Reflective learners evaluating experiences and learning to inform future progress and communicating
their learning in relevant ways for different audiences, as they:
● compare modern refrigerants in terms of how they achieve the criteria
required of modern refrigeration systems
● evaluate the principal components of refrigeration systems in terms of how
they are configured to achieve their design purpose
● determine sensible and latent heat gains for two proposed air conditioning
systems using appropriate design principles and relevant calculations
● specify refrigeration-based air conditioning for two proposed air conditioning
systems
● compare the materials and instruments used in the installation, testing and
commissioning of typical refrigeration systems
● discuss the methods used to install, test and commission a typical refrigeration
system
● describe the important requirements of the current regulations, legislation
and codes of practice applicable to refrigeration systems
Team workers reaching agreements and managing discussions to achieve results, as they:
● discuss the methods used to install, test and commission a typical
refrigeration system
Self-managers organising time and resources and prioritising actions, as they:
● evaluate the principal components of refrigeration systems in terms of how
they are configured to achieve their design purpose
● determine sensible and latent heat gains for two proposed air conditioning
systems using appropriate design principles and relevant calculations
● specify refrigeration-based air conditioning for two proposed air conditioning
systems
● compare the materials and instruments used in the installation, testing and
commissioning of typical refrigeration systems
● discuss the methods used to install, test and commission a typical
refrigeration system
● describe the important requirements of the current regulations, legislation
and codes of practice applicable to refrigeration systems.

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
15
Functional Skills — Level 2

Skill When learners are …


ICT – Use ICT systems
Select, interact with and use ICT systems independently using the internet to research refrigeration
for a complex task to meet a variety of needs
saving material electronically
using email to communicate with the tutor and
other learners
Manage information storage to enable efficient retrieval downloading and saving internet files and their own
work electronically
ICT – Find and select information
Select and use a variety of sources of information using the internet to research into refrigeration, saving
independently for a complex task material electronically
using email to communicate with the tutor and
other learners
ICT – Develop, present and communicate
information
Enter, develop and format information independently producing reports and presentations for both formative
to suit its meaning and purpose including: and summative assessment purposes
● text and tables
● images
● numbers
● records
Bring together information to suit content and purpose
Present information in ways that are fit for purpose and
audience
Select and use ICT to communicate and exchange using email to communicate with the tutor and
information safely, responsibly and effectively including other learners
storage of messages and contact lists
Mathematics
Identify the situation or problem and the mathematical performing calculations relating to thermodynamics,
methods needed to tackle it refrigeration cycles and refrigeration design for
Select and apply a range of skills to find solutions air conditioning
Use appropriate checking procedures and evaluate
their effectiveness at each stage
Draw conclusions and provide mathematical justifications

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


16 – Issue 1 – January 2010 © Edexcel Limited 2009
Skill When learners are …
English
Speaking and listening – make a range of contributions discussing the methods used to install, test and
to discussions and make effective presentations in a commission a typical refrigeration system
wide range of contexts
Reading – compare, select, read and understand texts researching refrigeration principles and practices from
and use them to gather information, ideas, arguments books, journals, CD ROMs and websites
and opinions
Writing – write documents, including extended writing producing reports for assessment purposes.
pieces, communicating information, ideas and opinions,
effectively and persuasively

Edexcel BTEC Level 3 Nationals in Construction and the Built Environment


– Issue 1 – January 2010 © Edexcel Limited 2009
17

You might also like