Instrumentation and Valves PDF

VALVE, ACTUATION AND
INSTRUMENTATION PORTFOLIO
flowserve.com 1
Experience In Motion
TABLE OF CONTENTS
Experience In Motion . . . . . . . . . . . . . . . . . . . 4 Linear Control Valves
Precision Control for the Toughest Flow Quick Reference Chart . . . . . . . . . . . . . . . . . . 43
Management Challenges. . . . . . . . . . . . . . . . 6 Linear Globe/Angle. . . . . . . . . . . . . . . . . . . . . 44
Industries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Severe Service Control Valves and Trim
Other Flowserve Products. . . . . . . . . . . . . . 12 Quick Reference Chart . . . . . . . . . . . . . . . . . . 49
When and Where You Need Us . . . . . . . . . . 13 Anti-Erosion. . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Valves Introduction. . . . . . . . . . . . . . . . . . . . 15 Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . 51

Cavitation Control . . . . . . . . . . . . . . . . . . . . . . 52
Ball Valves
Cavitation Elimination . . . . . . . . . . . . . . . . . . . 53
Quick Reference Chart . . . . . . . . . . . . . . . . . . 17
Floating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Gate Valves
Segmented . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Quick Reference Chart . . . . . . . . . . . . . . . . . . 55
Trunnion-Mounted. . . . . . . . . . . . . . . . . . . . . . 23 Flexible Split Wedge . . . . . . . . . . . . . . . . . . . . 56
Rising Stem. . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Flexible Wedge . . . . . . . . . . . . . . . . . . . . . . . . 56
Lined. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Parallel Slide . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Top-Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Split Wedge. . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Slab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Butterfly Valves
Quick Reference Chart . . . . . . . . . . . . . . . . . . 33 Globe Valves
Double-Offset . . . . . . . . . . . . . . . . . . . . . . . . . 34 Quick Reference Chart . . . . . . . . . . . . . . . . . . 59
Triple-Offset. . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Y-Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Lined. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
T-Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Rotary Control Valves Check Valves

Quick Reference Chart . . . . . . . . . . . . . . . . . . 37 Quick Reference Chart . . . . . . . . . . . . . . . . . . 67
Eccentric Plug. . . . . . . . . . . . . . . . . . . . . . . . . 38 Piston (Lift). . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Segmented Ball. . . . . . . . . . . . . . . . . . . . . . . . 38 Swing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
High-Performance Butterfly. . . . . . . . . . . . . . . 39 Tilting Disk. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Trunnion-Mounted Control Ball. . . . . . . . . . . . 40
Floating Control Ball . . . . . . . . . . . . . . . . . . . . 40
2 Flowserve Corporation
Plug Valves Positioners
Quick Reference Chart . . . . . . . . . . . . . . . . . . 75 Quick Reference Chart . . . . . . . . . . . . . . . . . . 111
Non-Lubricated. . . . . . . . . . . . . . . . . . . . . . . . 77 Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Lubricated. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Analog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Lined. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Switch Boxes
Actuation & Instrumentation Quick Reference Chart . . . . . . . . . . . . . . . . . . 119
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . 87 Switch Boxes. . . . . . . . . . . . . . . . . . . . . . . . . 120
Electric Actuation
Software
Quick Reference Chart . . . . . . . . . . . . . . . . . 123
Intrusive Multi-Turn. . . . . . . . . . . . . . . . . . . . . . 89
Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Non-Intrusive Quarter-Turn . . . . . . . . . . . . . . . 90
Non-Intrusive Multi-Turn. . . . . . . . . . . . . . . . . . 90 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Network Controls. . . . . . . . . . . . . . . . . . . . . . . 91
Gearboxes
Multi-Turn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Quarter-Turn. . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Fluid Power Actuation

Pneumatic — Scotch Yoke . . . . . . . . . . . . . . 101
Pneumatic — Linkage. . . . . . . . . . . . . . . . . . 102
Pneumatic — Rack & Pinion. . . . . . . . . . . . . 102
Pneumatic — Rotary. . . . . . . . . . . . . . . . . . . 104
Pneumatic — Linear . . . . . . . . . . . . . . . . . . . 105
Hydraulic. . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Direct Gas. . . . . . . . . . . . . . . . . . . . . . . . . . . 108
flowserve.com 3
EXPERIENCE IN MOTION
Every day, our customers are challenged to take their plant operations
to the next level. To do that, they need partners who deliver much more
than products.
Flowserve is answering that call. We’re working with the world’s most
important providers of oil and gas, power, chemicals, water and other
essential products to solve the absolute toughest challenges in fluid
motion and control.
Our industry-leading portfolio of pumps, seals, valves and actuation

is only part of the story. Our customers need answers that demand
extensive know-how and experience, and we’ve got it. More than
18 000 committed associates are go-to resources for expert engineering,
project management, technical support and service in every corner
of the world.
Expertise and Experience
Flowserve has an unrivaled combination of

technical expertise and practical experience
to help you solve the toughest fluid motion
control challenges.
Comprehensive Portfolio
Flowserve offers the world’s most

complete portfolio of pumps, seals,
valves and actuation. As a result, you’ll
Proven Quality and Reliability get the best solution with minimal time
shopping and evaluating.
Flowserve products are designed for
maximum safety and reliability — all to help
you reduce unplanned downtime while
keeping workers and plant assets safe.
Technology and Insights Local Support Worldwide

We help maximize your systems’ Flowserve is everywhere you do business.
efficiency and uptime by applying flow- Our global network of Quick Response
specific technologies and advanced Centers helps to minimize downtime
aftermarket capabilities, all supported with hands-on support that’s fast and
by a vast team of technical resources. dependable.
flowserve.com 5
PRECISION CONTROL FOR THE TOUGHEST
FLUID MANAGEMENT CHALLENGES
Sites around the world trust Flowserve to provide unmatched control for
the most difficult fluid management applications.
World-class valve performance is assured by a full portfolio of quarter-turn, rotary,

linear, control and specialty configurations. Unrelenting performance, extended
service life, and safe operation are at the core of every valve we manufacture.
Flowserve also offers precision actuation and instrumentation for every

application, from remotely controlled, fully automated electric, hydraulic and
pneumatic actuators to electronic positioners and level switches. Fail-safe
isolation, on-off modulation and precision process control ensure efficient
and reliable operation, even in the most hazardous environments.
Every intelligent flow control solution is designed to deliver industry-leading

performance and reliability, with embedded technologies that make them
easy for operators to use and maintain. By coupling our control solutions
with real-time system analysis, predictive maintenance and remote service
capabilities, you’ll get end-to-end intelligence that maximizes your uptime.
Even as we meet today’s challenges, we’re looking ahead to tomorrow’s

needs, pushing the limits of materials, severe-duty enhancements, precision
control, optimized flow and safety.
WORLD-RENOWNED BRANDS
Flowserve can trace its expertise in flow control back Accord™

to the mid-19th century and the earliest application of
Anchor/Darling®
control valves. Today, the Flowserve portfolio boasts
some of the world’s most renowned valve, actuation Argus®
and instrumentation brands. Atomac®
Automax™
Durco®
Edward®
Kammer ®
Limitorque®
Logix™
McCANNA™
NAF®
Norbro®
Nordstrom®
PMV™
Serck Audco®
Valbart ®
Valtek®
Worcester®
flowserve.com 7
INDUSTRIES
The world’s infrastructure industries rely on Flowserve to solve their most complex fluid
motion and control challenges. We deliver more than the most complete portfolio of pumps,
seals, valves and actuation; we help our customers exceed their operational goals. We
understand that profitable performance requires critical process equipment and systems
operate safely, reliably and at maximum efficiency. Our commitment to meeting these
expectations for our customers drives everything we do.
OIL AND GAS

From production wells deep on ocean floors and remote oil sands, to
transportation infrastructures that span continents and refineries that create
the world’s feedstocks — global energy companies push the limits of
fluid motion and control. They need solutions for increasingly demanding
applications. To meet their high-temperature, high-pressure processing
needs, Flowserve provides unmatched mechanical, hydraulic and materials
know-how and the industry’s most complete flow management portfolio.
Backed by service and support teams around the globe, we can help
maximize uptime, productivity and safety, and keep you at the forefront
of innovation.
CHEMICAL
Aggressive corrosion and erosion. Hazardous, toxic substances. Application
variation that makes equipment specification more than a little challenging.
The chemical industry faces tough challenges, and Flowserve is in the
middle of them, solving our customers’ most difficult hurdles every day.
Our solutions span the industry, from basic, organic, specialty and fine
chemicals to biofuels and pharmaceuticals. We continue to build on
our materials science heritage and advance sealing and flow control
technologies. We do this to help customers improve performance,
maximize service life and keep personnel safe.
POWER
Rapid load variations, frequent stops and starts, and the highest temperatures,
flows and pressures. Welcome to fluid motion and control in the power
industry. These grueling applications are where Flowserve became a driving
force in power generation. To appreciate our role, you needn’t look further
than our pioneering work in nuclear power or the massive machines we’ve built
for conventional steam plants. But that’s history. Today, we’re developing next
generation solutions to meet the newest challenges, including concentrated
solar, biomass and geothermal.
WATER RESOURCES
Whether for flood control, desalination, distribution, waste management or
agriculture, those who move water need to do it economically, sustainably
and reliably. They need low-maintenance equipment and high-efficiency
systems that minimize energy consumption. They also need partners who
ensure the right solution is specified every time to minimize environmental
impacts and control total life cycle costs. Supplying flow management systems
for the global water resources is a commitment with far-reaching implications.
That’s why the world’s leading municipalities and water system providers
trust Flowserve.
GENERAL INDUSTRY
From paper and metals to sweeteners and electronics, most of the world’s
products depend on reliable fluid motion and control solutions. Endless
demanding and complicated application parameters are found in industries
such as food and beverage, mining, steelmaking, and pulp and paper.
Flowserve has a global portfolio of solutions and technical expertise
capable of tackling the tough and often unique requirements found in
these industries. A global network of Quick Response Centers delivers
the timely technical support, parts and service needed to keep operations
running dependably and profitably.
flowserve.com 9
SERVICES
SERVICES THAT DRIVE SAFETY, RELIABILITY AND PERFORMANCE

Flowserve offers a comprehensive suite of services designed to provide unprecedented
value and cost savings throughout the life span of the system. By integrating hydraulic,
mechanical and materials engineering knowledge with real-world operating and practical
business solutions, Flowserve helps customers:
• Increase equipment reliability
• Optimize asset uptime and performance
• Improve plant and personnel safety
• Lower total cost of maintenance
PARTS, REPAIRS, UPGRADES AND FIELD SERVICES

Investments in well-equipped Quick Response Centers, mobile service
fleets, and advanced manufacturing technologies along with the unrivaled
expertise of its engineers, technicians and craftsmen enable Flowserve to
address virtually every service requirement for process equipment, on-
or off-site, regardless of OEM.
• Repair and Upgrades — From machining to mechanical upgrades to

on-site management, Flowserve repairs and upgrades services to improve
equipment performance while reducing downtime and costs.
• Replacement Parts and Components — Using its broad network of

service and manufacturing centers, Flowserve supplies customers with
the quality parts needed to keep operations running smoothly and profitably.
• Field Services — From maintenance to management, highly qualified

Flowserve project managers, engineers and technicians can be deployed
on-site to help your operations run smoothly.
ENGINEERING AND TECHNICAL SERVICES
With world-class engineering and technical resources in more than
55 countries, Flowserve delivers value-added solutions that improve
operational performance and increase profitability for its customers.
• Technical Assessments — Flowserve can perform system audits to

identify operational issues that may be constraining output or elevating
operating costs and recommended solutions.
• Reliability Services — Flowserve offers standard solutions to improve

rotating equipment reliability while lowering cost of ownership.
• Engineering Support — Flowserve engineers can engage remotely

or on-site to support grassroots project planning, system design or
project management requirements.
ASSET MANAGEMENT AND OPTIMIZATION

Flowserve continues to invest in capabilities and technologies to help customers realize more payback from
their plant assets.
• LifeCycle Advantage — Through a combination of on-site assessments and technology, Flowserve experts
help customers benchmark operational performance, define key metrics and implement solutions to achieve
their long-term operational goals.
• Intelligent Performance Solutions — By employing sophisticated products, services and software to collect,
examine and understand data, Flowserve helps customers use predictive analytics to take action and improve
asset reliability.
EDUCATION AND TRAINING

Flowserve offers a wide range of innovative programs to help plant operators, reliability specialists, engineers
and maintenance personnel deepen their understanding of critical equipment and processes.
• Learning Resource Center — At its state-of-the-art Learning Resource Centers, Flowserve provides
hands-on training and instruction in the principles of equipment operation, maintenance and reliability.
• Customer On-site Training — Flowserve can design, develop, and deliver training programs tailored
specifically around the people, equipment and processes at a customer’s facility.
• Online Training — Flowserve offers web-based modules with online testing and reporting to ensure
comprehension of the most important principles.
flowserve.com 11
OTHER FLOWSERVE PRODUCTS
Flowserve has the products, systems and expertise to help processes run smarter, safer and
more efficiently. In addition to its extensive valve and actuation portfolios, Flowserve offers
high-quality pumps and seals for the world’s toughest applications.
PUMPS
Pumping systems from Flowserve meet customer demands in the most
arduous services. Our world-renowned brands of pre-engineered,
engineered and special purpose pumps give customers access to the most
impressive portfolio of proven hydraulic and mechanical know-how.
SEALS
Whether for pumps, compressors, mixers or steam turbines, Flowserve
mechanical sealing solutions keep rotating equipment running safely and
efficiently. You’ll find them in the toughest applications, such as flashing
hydrocarbons, abrasive slurries and ultra-high pressure gases.
WHEN AND WHERE YOU NEED US
Our network of manufacturing facilities, design centers of excellence, strategically located
Quick Response Centers and customer on-site resources means customers never have to
look far for support.
flowserve.com 13
14 14
VALVES
VALVES
Whether it’s critical, lethal, toxic or Ball. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
aggressive, you’ll find Flowserve valves Butterfly. . . . . . . . . . . . . . . . . . . . . . . . . 33
Rotary Control. . . . . . . . . . . . . . . . . . . . 37
doing the job around the world. That’s
Linear Control . . . . . . . . . . . . . . . . . . . . 43
because extended service life, safe
Severe Service Control . . . . . . . . . . . . . 49
operation and environmental protection are
Gate. . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
at the core of every valve we manufacture. Globe. . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Global customers can easily find the Check . . . . . . . . . . . . . . . . . . . . . . . . . . 67
configurations they require, engineered Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
to meet requisite performance and safety

standards, whether it’s a standard or
custom-engineered solution.
It’s a portfolio of brands for quarter-

turn, rotary, linear, control and specialty
configurations that covers today’s toughest
demands for valve performance. But
we’re looking ahead to new challenges
that will test the current state of valve
manufacturing. This mindset pushes us
to pursue materials advancements and
severe-duty enhancements as well as the
next levels of precision control, optimized
flow and fail-safe shut-off.
flowserve.com 15
flowserve.com 15
FK76M
16
VALVES | BALL
BALL
Long life and safe operation in tough services, from cryogens to highly corrosive fluids —
these are the hallmarks of our comprehensive and respected ball valve portfolio. Maximum
safety and environmental protection are the driving factors in every design, achieved
through corrosion-resistant materials, fire-safe testing, blowout-proof stems and tight shut-off
features. Global customers can fulfill requirements from dozens of configurations built to a
full range of international design and performance standards.
Ball – Quick Reference*

Product Sub-Type Sizes Pressures Temperatures
DN 65 to 200 PN 16 to 40 -48°C to 230°C

FK75M Floating
NPS 2½ to 12 Class 150 to 900 (-54°F to 446°F)
DN 15 to 50 PN 16 to 250 -105°C to 650°C

FK79 Floating
NPS ½ to 2 Class 150 to 2500 (-157°F to 1202°F)
DN 25 to 400 PN 10 to 40 -30°C to 250°C

Duball™ DL Floating
NPS 1 to 16 Class 150 to 300 (-22°F to 482°F)
DN 25 to 400 PN 10 to 40 -30°C to 250°C

EK71 Floating
DN 8 to 150 PN 100 -46°C to 230°C

Three-Piece Ball Floating
NPS ¼ to 6 Class 600 (-51°F to 446°F)
DN 15 to 250 PN 20 to 50 -46°C to 315°C

Flanged Ball Floating
DN 8 to 150 PN 100 -196°C to 82°C

Cryogenic Ball Floating
NPS ¼ to 6 Class 600 (-321°F to 180°F)
* Additional products shown on next two pages
flowserve.com 17
Ball – Quick Reference, cont'd.
DN 15 to 200 PN 20 to 110 -196°C to 200°C

CryoSeal Floating
NPS 1/2 to 8 Class 150 to 600 (-320°F to 400°F)
ProCap DN 500 to 750 PN 16 -30°C to 250°C

Segmented
Capping Valve NPS 20 to 30 Class 150 (-22°F to 482°F)
DN 25 to DN 50 PN 16 to 160 -105°C to 650°C

FK76M Trunnion-Mounted
DN 50 to 500 PN 150 to 260 -105°C to 650°C

HK35 Trunnion-Mounted
DN 50 to 1600 PN 20 to 420 -46°C to 220°C

VW1 Trunnion-Mounted
PN 20 to 420
DN 25 to 1600 -196°C to 400°C
VB2 and VB3 Trunnion-Mounted
NPS 1 to 64
Class 150 to 2500
(-320°F to 750°F)
API 2000 to 10 000
PN 20 to 420
DN 50 to 1400 -46°C to 150°C
Subsea Trunnion-Mounted
NPS 2 to 56
Class 150 to 2500
(-51°F to 302°F)
API 2000 to 10 000
Double DN 50 to 1200 PN 20 to 420 -196°C to 400°C

Trunnion-Mounted
Block and Bleed NPS 2 to 48 Class 150 to 2500 (-320°F to 750°F)
Cryogenic DN 25 to 1400 PN 20 to 420 -196°C to 200°C

Trunnion-Mounted
Ball Valve NPS 1 to 56 Class 150 to 2500 (-320°F to 392°F)
DN 150 to 900 PN 10 to 40 -30°C to 250°C

Trunnball™ DL Trunnion-Mounted
Rising Stem Ball DN 25 to 600 PN 10 to 320 -196°C to 600°C

Rising Stem
Valve (RSBV) NPS 1 to 24 Class 150 to 2500 (-321°F to 1112°F)
DN 15 to 350 PN 16 -10°C to 200°C

AKH2 Lined
NPS ½ to 14 Class 150 (14°F to 392°F)
DN 25 to 150 PN 50 -10°C to 200°C

AKH2-300 Lined
NPS 1 to 6 Class 300 (14°F to 392°F)
-10°C to 200°C
AKH2A Lined NPS 1 to 6 Class 150
(14°F to 392°F)
VALVES | BALL
LINEAR CONTROL
-10°C to 200°C
AKH3 Lined NPS 1 to 14 Class 150
(14°F to 392°F)
DN 25 to 150 PN 16 -10°C to 350°C

AKH5 Lined
NPS 1 to 6 Class 150 (14°F to 662°F)
DN 25 to DN 50 For glass -10°C to 200°C

AKH7-KP Lined
NPS 1 to 2 connections (14°F to 392°F)
DN 15 to 150 PN 16 -10°C to 200°C

AKH8 Lined
NPS ½ to 6 Class 150 (14°F to 392°F)
DN 25 to 150 Varies, depending Varies, depending

V-Port Lined
NPS 1 to 6 on valve on valve
DN 25 to 150 PN 16 -10°C to 200°C

AMP3 Lined
NPS 1 to 6 Class 150 (14°F to 392°F)
DN 25 to 150 PN 16 -10°C to 200°C

Sight Glass Series Lined
NPS 1 to 6 Class 150 (14°F to 392°F)
AKH6 Fully Lined DN 25x50 to 150x200 PN 16 -10°C to 200°C

Lined
Tank Drain NPS 1x2 to 6x8 Class 150 (14°F to 392°F)
DN 15 to 450 PN 20 to 260 -196°C to 815°C

McCANNASEAL® Top-Entry
PN 20 to 420
DN 50 to 1400 -196°C to 400°C
VT1 Top-Entry
NPS 1¹³∕16 to 16¾
Class 150 to 2500
(-320°F to 750°F)
API 2000 to 10 000
flowserve.com 19
BALL
F L O AT I N G
FK75M
A split-body ball valve for the chemical and petrochemical industries with a highly standardized design.
• Increased uptime and durability from robust design with chemical coating and high- SPECIFICATIONS
performance cladding Sizes: DN 65 to 200; NPS 2½ to 12
• Reliable performance to highest zero-tightness demands enabled by FCI 70-2 Class VI Press: PN 16 to 40; Class 150 to 900
seat design Temp: -48°C to 230°C (-54°F to 446°F)
• Reduced replacement cost via easy upgrades and chemical coating options for
diverse applications Refer to literature
• Improved plant and personnel safety assured by valve compliance with fugitive ARAFL0001-W-FK75M at
Argus emissions standard ISO 15848 flowserve.com/library.
F L O AT I N G
FK79
With many innovative design features, the FK79 represents the highest standard in valve technology and is designed to
meet API-6D, ANSI 16.34 and BS 5351 requirements.
• High performance in severe service conditions and extreme environments ensured by SPECIFICATIONS
durable design with chemical coating and high-performance cladding Sizes: DN 15 to 50; NPS ½ to 2
• Reliable performance to highest zero-tightness demands enabled by FCI 70-2 Class VI Press: PN 16 to 250; Class 150 to 2500
seat design Temp: -105°C to 650°C (-157°F to
• Long service life via double-stem seal system and stem supported in bearings, 1202°F)
ensuring seals are free from operating loads
Argus Refer to literature
• Reduced environmental impact and improved safety ensured by compliance with
TA-Luft, EPA (Method 21) and ISO 15848 fugitive emissions requirements ARAFL0001-W-FK79 at
flowserve.com/library.
F L O AT I N G
Duball DL
A high-performance, metal-seated, full-bore ball valve, equally suitable for isolation, on-off and modulating control
applications.
• Long, maintenance-free, safe operation in automated on-off and control service SPECIFICATIONS
assured by spring-loaded stem seal packing Sizes: DN 25 to 400; NPS 1 to 16
• Increased plant and personnel safety via blowout-proof stem and high-torque Press: PN 10 to 40; Class 150 to 300
transmission with minimum mechanical backlash Temp: -30°C to 250°C (-22°F to 482°F)
• Broad application versatility enabled by extensive size range and options, including
fire-safe tested versions Refer to literature NFENTB4167
at flowserve.com/library.
NAF
VALVES | BALL
F L O AT I N G
EK71
An end-entry ball valve for the oil and gas industry to prevent losses from production or material leakage. Designed to
meet API-6D, ANSI 16.34 and BS 5351 requirements.
• Environmental compliance via end-entry design that reduces fugitive emissions SPECIFICATIONS
• Reliable performance to highest zero-tightness demands from FCI 70-2 Class VI Sizes: DN 15 to 50; NPS ½ to 2
seat design Press: PN 16 to 100; Class 150 to 600
• Improved plant and personnel safety with ISO 15848 compliance Temp: -48°C to 230°C (-54°F to 446°F)
Refer to literature ARAFL0001-W-EK71
Argus
F L O AT I N G
Three-piece Ball
The most respected ball valve design in the industry, designed to ANSI B16.34 specifications.
• Significantly longer service life compared to conventional ball valves via improved SPECIFICATIONS
stem seal design Sizes: DN 8 to 150; NPS ¼ to 6
• Increased durability from heavy-duty bolting and valve constructions Press: PN 100; Class: 600
• Ease of maintenance enabled by design that allows actuators and brackets to be Temp: -46°C to 230°C (-51°F to 446°F)
removed without affecting valve or piping integrity, plus easy access for stem seal
adjustment Refer to literature WCABR1050 or
• Low inventory carrying costs made possible by common mounting brackets for WCE4459 at flowserve.com/library.
Worcester three-piece and equivalent flanged valves
F L O AT I N G
Flanged Ball
A standardized line of flanged ball valves offering tight shutoff and leak-tight stem seals. Designed for high-cycle
operation, pressure integrity, material compatibility, fast operation and high-temperature endurance.
• Longer service life through unique seat design that minimizes friction and wear SPECIFICATIONS
• Economical operation facilitated by low operating torque Sizes: DN 15 to 250; NPS ½ to 10
• Improved plant and personnel safety via compact, blowout-proof stem Press: PN 20 to 50; Class 150 to 300
Temp: -46°C to 315°C (-51°F to 600°F)
Refer to literature WCABR1013 and
PB 800 at flowserve.com/library.
Worcester
flowserve.com 21
BALL
F L O AT I N G
Cryogenic Ball
High-performance shutoff valves for tough applications involving all types of cryogens, including oxygen, hydrogen,
methane, ammonia, nitrogen, flourine, LNG and deuterium.
• High performance and low thermal stress assured by valve design that assures tight SPECIFICATIONS
shutoff, zero-body leakage and low torque through large thermal excursions from Sizes: DN 8 to 150; NPS ¼ to 6
ambient to -253°C (-425°F) Press: PN 100; Class 600
• Economical performance provided by eliminating the expensive high-maintenance Temp: -196°C to 82°C
stuffing box common in rising stem globe valves (-321°F to 180°F)
• Increased plant and personnel safety assured by zero-leak packing, fire-tight design
and blowout-proof/pressure-safe stem Refer to literature WCABR1040 or
Worcester WCEBR0013 at flowserve.com/library.
F L O AT I N G
CryoSeal
The optimum solution for cryogen flow isolation at temperatures as low as -196°C (-320°F), including LNG liquefaction,
transportation and regasification. Certified fire-safe and meets ISO 15848 standards.
• Environmental and regulatory compliance made possible by design engineered to SPECIFICATIONS

meet ISO 15848, ASME B16.34, BS 6364, MSS SP-134, MESC SPE 77/200, ASME Sizes: DN 15 to 200; NPS ½ to 8
B16.10 and API 6D specifications Press: PN 20 to 110; Class 150 to 600
• Easy in-line maintenance via top-entry design Temp: -196°C to 200°C
• Simple and cost-effective to automate due to quarter-turn operation and low-torque (-320°F to 400°F)
seat profiles
Refer to literature MMENBR1027
McCANNA
or MMENIM2007 at flowserve.com/
library.
SEGMENTED
ProCap Capping Valve

Unique high-tech capping valve designed for automated filling of wood chips for batch digester applications in
the pulp industry.
• Maximized uptime and reduced maintenance requirements via eccentric hubs, which SPECIFICATIONS
load the seat and provide tight shutoff Sizes: DN 500 to 750; NPS 20 to 30
• Increased efficiency provided by its unique design that prevents wood chips from Press: PN 16; Class 150
getting stuck between the housing and the ball Temp: -30°C to 250°C (-22°F to 482°F)
• Improved safety and environment compliance due to tight shutoff that prevents
NAF Refer to literature Fk 41.55
leakage to the atmosphere during cooking sequence
• Excellent corrosion resistance from EN 1.4408/ASTM A351 CF8M body at flowserve.com/library.
VALVES | BALL
TRUNNION-MOUNTED
FK76M
Designed to meet API-6D, ANSI B16.34 and BS 5351 requirements, the FK76M delivers durability and low operating
torques with a clear separation of sealing and bearing functions. Fire-safe to BS 6755 and API 607.
• Long service life in severe applications owing to chemical coating and high- SPECIFICATIONS
performance cladding Sizes: DN 65 to 900; NPS 2½ to 36
• Reliability ensured by seat design to FCI 70-2 Class VI, enabling it to meet the Press: PN 16 to 160; Class 150 to 900
highest demands with zero tightness Temp: -105°C to 650°C
• Reduced replacement cost, as performance capabilities of valves can be easily (-157°F to 1202°F)
upgraded and coatings can be applied to suit different applications
Argus Refer to literature ARENTB0001
• Improved plant and personnel safety from valve design, which meets fugitive
emission standard ISO 15848 at flowserve.com/library.
TRUNNION-MOUNTED
HK35
All the benefits of the FK76M in a high-pressure design. Designed to meet API-6D, ANSI B16.34 and BS 5351
requirements.
• Extended service life and low operating torques provided by clear separation of SPECIFICATIONS
sealing and bearing functions on both ball and stem Sizes: DN 50 to 500; NPS 2 to 20
• Environmental compliance assured by stem seal design, which meets current Press: PN 150 to 260;
TA-Luft and EPA (method 21) standards Class 900 to 1500
• Increased plant and personnel safety via fire-safe design and construction that Temp: -105°C to 650°C
complies with fugitive emission standard ISO 15848 (-157°F to 1202°F)
Argus
• Installation ease enhanced by included DIN ISO mounting plate
Refer to literature ARGBR 1111
TRUNNION-MOUNTED
VW1
This API 6D-compliant, welded-body valve seals off both seats at the same time and allows bleeding of the entrapped
cavity pressure (double block and bleed) with the ball in the closed position.
• Reduced fugitive emissions made possible by welded-body construction, which SPECIFICATIONS

eliminates leak paths Sizes: DN 50 to 1600; NPS 2 to 64
• Greater process control and safety assured by dual independent floating seat Press: PN 20 to 420; Class 150 to 2500
design, guaranteeing sealing power at any pressure level Temp: -46°C to 220°C (-50°F to 428°F)
• Economical performance due to low torque requirements
• Simplified seal verification made possible by double block and bleed feature Refer to literature VBEEBR1009
Valbart or VBENBR1010 at flowserve.com/
library.
flowserve.com 23
BALL
TRUNNION-MOUNTED
VB2 and VB3

The Valbart VB2 and VB3 are repairable, bolted body, side-entry, trunnion-mounted ball valves featuring a fixed ball and
floating seat rings. Compliant with API 6D and 6A.
• Greater efficiency, safety and control enabled by pressure-absorbing bearings, seat- SPECIFICATIONS
sealing action at any rated pressure and anti-static design Sizes: DN 25 to 1600; NPS 1 to 64
• Plant and personnel protected by anti-blowout design that ensures the stem is Press: PN 20 to 42; Class 150 to 2500;
retained by the stem cover API 2000 to 10 000
• Environmental compliance assured by zero-emission design Temp: -196°C to 400°C
• Reduced actuation costs, as seat design minimizes the torque required to operate the (-320°F to 750°F)
Valbart valve without losing the sealing power
Refer to literature VBEEBR1009
or VBENBR1010 at flowserve.com/
library.
TRUNNION-MOUNTED
Subsea
Quarter-turn ball valve designed for total reliability against internal and external leaks in shallow and deep-water
applications.
• Application flexibility derived from compatibility with hydraulic actuators, ROV- SPECIFICATIONS
operated gear boxes, and electrical and hydraulic umbilical systems Sizes: DN 50 to 1400; NPS 2 to 56
• Extended life due to robust design that protects against leaks with metal-to-metal Press: PN 20 to 420; Class 150 to
seats, elastomeric and thermoplastic seals, and corrosion-resistant alloy seal housing 2500; API 2000 to 10 000
• Minimized leak paths made possible by body designs plus corrosion-resistant Temp: -46°C to 150°C (-51°F to 302°F)
materials of construction
• Complete safety and functionality compliance ensured by hyperbaric chamber testing Refer to literature VBENBR1005
Valbart (API 6DSS certification/API Spec Q1) at flowserve.com/library.
TRUNNION-MOUNTED
Double Block and Bleed

Side-entry ball valve, with either a bolted or welded body, designed for use in upstream, midstream and downstream oil
and gas applications.
• Initial and installation cost savings owing to reduced structural requirements of design SPECIFICATIONS
that saves both space and weight Sizes: DN 50 to 1200; NPS 2 to 48
• Increased system reliability from single valve with bleed port between two valves Press: PN 20 to 420; Class 150 to 2500
• Improved plant and personnel safety due to anti-blowout stem, fire-safe construction Temp: -196°C to 400°C
and anti-static design (-320°F to 750°F)
Valbart Refer to literature VBENBR1004
VALVES | BALL
TRUNNION-MOUNTED
Cryogenic Ball Valve

Meets demanding end-user requirements for leak rate and fugitive emission performance. Body construction and
flexible trim configurations ensure proper safe isolation.
• Improved seal performance at extremely low temperatures enabled by isolating SPECIFICATIONS

stem seals from cold media Sizes: DN 25 to 1400; NPS 1 to 56
• Guaranteed optimum leakage resistance in demanding cryogenic applications via Press: PN 20 to 420; Class 150 to 2500
primary energized lip seal Temp: 196°C to 200°C (-320°F to 392°F)
• Increased reliability and safety from automatic discharge of excessive body
pressure by internal self-relieving system (top- and side-entry models only) Refer to literature VBEEBR1002
Valbart
TRUNNION-MOUNTED
Trunnball DL
Full-port process ball valve well-suited for the most challenging operating conditions. Frequently used for isolation or
on-off applications, but equally suitable for control.
• Improved plant and personnel safety provided by the Z-trim option’s excellent SPECIFICATIONS
cavitation control and noise reduction Sizes: DN 150 to 900; NPS 6 to 36
• Reduced maintenance enabled by spring-loaded stem seal packing Press: PN 10 to 40; Class 150 to 300
• Broad application flexibility facilitated by the extensive size range Temp: -30°C to 250°C (-22°F to 482°F)
• Optimum controllability through the use of a sturdy blowout-proof stem that
provides high torque transmission with minimal mechanical backlash Refer to literature NFENTB4168
NAF
Performance You Can Count On

From the bone-chilling cold of the Arctic to the stifling dry heat of desert
regions to the hot salty air of tropical coasts, Flowserve solutions can
be found anywhere fluid motion and control are mission-critical.
Our products excel, even in these challenging environments. And
our flow control experts are right there with them to provide the
engineering, installation and maintenance support you need to
get the most out of your operations.
flowserve.com 25
BALL
RISING STEM
Rising Stem Ball Valve (RSBV)

The oil and gas industry’s choice for applications requiring a mechanically energized metal or soft seat to prevent losses
from process contamination or material leakage. Ideal for frequent cycling.
• Extended service life and low maintenance costs due to unique helix coil stem design, SPECIFICATIONS
which enables friction-free opening and closing Sizes: DN 25 to 600; NPS 1 to 24
• Improved product quality, efficiency and safety with tightness performance up to ANSI Press: PN 10 to 320; Class 150 to 2500
FCI-70-2 Class VI Temp: -196°C to 600°C
• Easy in-line inspection and maintenance enabled by top-entry design (-321°F to 1112°F)
• Reduced corrosion due to heavy wall thickness in excess to ASME/ANSI B16.34
Refer to literature VBENBR1008
Valbart • Improved personnel safety from blowout-proof stem that meets international
standards of API 600 and 6D at flowserve.com/library.
LINED
AKH2
Designed to reduce energy and pumping costs, the AKH2 two-piece, full-port design minimizes pressure losses and
increases flow capacity.
• Minimized downtime and maintenance from long-life seats and large stem sealing SPECIFICATIONS
area, plus substantial middle flanges and molded liner Sizes: DN 15 to 350; NPS ½ to 14
• Reduced energy costs enabled by low frictional coefficients and operating torques Press: PN 16; Class 150
• Reduced fugitive emissions made possible by reduction of stem side loads, eliminating Temp: -10°C to 200°C (14°F to 392°F)
potential valve gland leaks
• Increased plant and personnel safety assured by anti-blowout stem and Refer to literature ATENTB0010
Atomac anti-static design at flowserve.com/library.
LINED
AKH2-300
This valve offers the same advantages as the AKH2 series, while meeting the stricter pressure requirements, wall
thickness, face-to-face and flange dimensions of ANSI Class 300.
• Enhanced safety derived from ANSI Class 300 piping requirements demanded in the SPECIFICATIONS
chlorine and related industries Sizes: DN 25 to 150; NPS 1 to 6
• Low inventory carrying costs and simplified maintenance made possible by the high Press: PN 50; Class 300
degree of interchangeability with the entire AKH2 series Temp: -10°C to 200°C (14°F to 392°F)
Refer to literature ATETB001
Atomac or ATENTB0010 at flowserve.com/
library.
VALVES | BALL
LINED
AKH2A
The AKH2A is a short-pattern, full-port lined ball valve that offers the same benefits as the AKH2 at reduced space and
weight. Designed per ASME B16.5 Class 150 flange dimensions and ASME B16.10 face-to-face dimensions.
• Broad application versatility enabled by a variety of metallic and non-metallic ball SPECIFICATIONS
material options as well as available characterized ball for throttling services Sizes: NPS 1 to 6
• Greater application flexibility and decreased structural impact from reduced space Press: Class 150
and weight (compared to the AKH2) Temp: -10°C to 200°C (14°F to 392°F)
• Lower operating costs resulting from high-efficiency performance
• Reduced automation costs due to low turning torque and ISO 5211 universal Refer to literature ATETB001
mounting pad
library.
LINED
AKH3
The AKH3 is an ANSI B16.10 short-pattern, reduced-port, lined ball valve. The floating ball design ensures bubble-tight
shut-off.
• Economical performance and improved process efficiency from bubble-tight SPECIFICATIONS

shutoff across the pressure range of 1 mbar to 19 bar (14.5 psi to 275 psi) Sizes: NPS 1 to 14
• Long-term external leak protection provided by PTFE chevron packing rings in a Press: Class 150
deep stuffing box, substantial body flanges and molded liner seal Temp: -10°C to 200°C (14°F to 392°F)
• Low installation costs, as ASME dimensions permit the replacement of previously
installed valves with no need to alter existing piping Refer to literature ATETB001
Atomac • Safety assured by blowout-proof stem assembly and anti-static device or ATENTB0010 at flowserve.com/
library.
LINED
AKH5
These full-port, ceramic-lined valves are recommended when nothing else will work in applications with abrasive
slurries, high-temperature corrosives and services with high-temperature fluctuations.
• Long service life and wear resistance enabled by Mg-PSZ ceramic surfaces that SPECIFICATIONS
resist erosion, corrosion and extreme temperature shock Sizes: DN 25 to 150; NPS 1 to 6
• Increased uptime from minimal cavity space, which significantly reduces Press: PN 16; Class 150
retention of line media and product contamination Temp: -10°C to 350°C (14°F to 662°F)
Atomac • Reduced energy and pumping costs due to full port design, which minimizes
pressure loss and increases flow capacity Refer to literature ATETB001
• Shutoff to ANSI FCI 70-2 Class IV or ATENTB0010 at flowserve.com/
• Virtually no maintenance and low stem torque enabled by large stem sealing area library.
flowserve.com 27
BALL
LINED
AKH7-KP
Engineered exclusively for glass pipe systems. Available with socket/ball or plane end connections per DN EN 12585 or
DN EN 1092. For flange/glass end connections, the AKH7-KPF is available.
• Long service life and high corrosion resistance via FEP- or PFA-molded fluorocarbon SPECIFICATIONS
resin liners (others available on request) Sizes: DN 25 to DN 50; NPS 1 to 2
• Handling of highly viscous fluids or process applications with high purity requirements Press: For glass connections
enabled by liners’ inert, non-stick properties Temp: -10°C to 200°C (14°F to 392°F)
• Increased plant and personnel safety assured by anti-static design and anti-blowout
stem, plus long-term leak protection provided by PTFE chevron packing rings and Refer to literature ATETB001
molded liner/seal
library.
LINED
AKH8
This full-port monoblock ball valve improves sticky, adhesive and highly viscous fluid applications, particularly in high
cycling requirements that can cause deterioration in floating ball design valves.
• Superior performance in high-viscosity applications made possible by single-piece ball SPECIFICATIONS

and stem unit Sizes: DN 15 to 150; NPS ½ to 6
• Reduced downtime and maintenance enabled by metal-to-metal body joint, which Press: PN 16; Class 150
absorbs destructive pipe vibrations and negative effects of thermal cycling Temp: -10°C to 200°C (14°F to 392°F)
• Greater efficiency provided by larger diameter seats and integral retention lip, which
Atomac minimize flow turbulence and enhance seat stability Refer to literature ATDEENFL0007
LINED
V-Port
V-Port valves enable you to achieve precise control and modulation of aggressive products without the expense and long
deliveries of exotic alloy valves.
• Greater process control and modulation for throttling applications via characterized SPECIFICATIONS
ball valve Sizes: DN 25 to 150; NPS 1 to 6
• Available in models AKH3, AKH8, AKH2A and AKH2; or in Mg-PSZ ceramic for Press: Varies, depending on valve
model AKH5. Temp: Varies, depending on valve
Refer to literature ATENTB0010
Atomac at flowserve.com/library.
VALVES | BALL
LINED
AMP3
The compact design of this three-way ball valve permits use in corrosive diverter applications with space constraints.
• Lower capital cost in difficult services than alloy valves, with equal or superior SPECIFICATIONS
corrosion resistance Sizes: DN 25 to 150; NPS 1 to 6
• Reduced plant operating costs made possible by high-flow capacity, which Press: PN 16; Class 150
minimizes valve pressure losses Temp: -10°C to 200°C (14°F to 392°F)
• Broad application versatility for a wide variety of 90° or 180° flow patterns
enabled by L- or T-ball configurations Refer to literature ATETB001
• Improved efficiency due to floating ball seat design which ensures bubble-tight or ATENTB0010 at flowserve.com/
Atomac library.
shutoff across the pressure range
LINED
Sight Glass Series

Atomac sight glasses offer clear visual inspection from either side. An integrated drip lip with a cast core provides
visual flow indication, even at low velocity. Available in standard, three-way and four-way models.
• Convenience, efficiency and ease of visual inspection enabled by sight glass on SPECIFICATIONS
either side Sizes: DN 25 to 150; NPS 1 to 6
• High durability of inspection apertures assured by borosilicate glass, utilized to Press: PN 16; Class 150
withstand high temperatures, mechanical stress and corrosion per DIN 7080 Temp: -10°C to 200°C (14°F to 392°F)
• Long service life and high corrosion resistance due to thick, uniform, blowhole-
free FEP or PFA liners for all non-glass internal components Refer to literature ATETB001
library.
LINED
AKH6 Fully Lined Tank Drain

Primarily used for tank drainage, AKH6 valves are also commonly installed in place of reducing spools to downsize
piping dimensions.
• Lower energy and pumping costs facilitated by larger inlet port and full-port SPECIFICATIONS
design, which minimizes pressure loss and increases flow capacity Sizes: DN 25x50 to 150x200;
• Improved handling of highly viscous or high-purity services assured by inert, non- NPS 1x2 to 6x8
stick liners Press: PN 16; Class 150
• Reduced downtime and easy maintenance made possible by interchangeability of Temp: -10°C to 200°C (14°F to 392°F)
all internal components and spare parts with entire AKH2 series
Atomac Refer to literature ATETB001
or ATENTB0010 at flowserve.com/
library.
flowserve.com 29
BALL
TOP-ENTRY
McCANNASEAL
A high-performance, top-entry, metal- or soft-seated ball valve designed for use in PTA production and other general
applications. Ideal for remote operations with high-cycle frequency.
• Reliable operation assured by sealing of carbon graphite seat, with wedge design for SPECIFICATIONS
consistently “clean” finished product Sizes: DN 15 to 450; NPS ½ to 18
• Economical performance via quarter-turn and low torque for compatibility with cost- Press: PN 20 to 260; Class 150 to 1500
effective actuators Temp: -196°C to 815°C
• Improved personnel safety with fire-seal seats and two-way shutoff (-320°F to 1500°F)
• Fast, easy maintenance enabled by top-entry design that permits in-line service and
emergency entrance in minutes Refer to literature MMENBR1015 at
McCANNA flowserve.com/library.
• Longer service life from engineered design that maximizes seal and seat lives
TOP-ENTRY
VT1
An in-line repairable valve that assures bi-directional sealing with two independent floating seats. Double block and bleed
feature, fire-safe design and anti blow-out stem.
• Increased efficiency enabled by independent ball and stem, which minimizes side SPECIFICATIONS
thrust caused by pressure on the ball Sizes: DN 50 to 1400; NPS 113∕16 to 16¾
• Improved safety assured by anti-static design that guarantees electrical continuity Press: PN 20 to 420; Class 150 to 2500;
between all metallic components API 2000 to 10 000
• Simplified in-line inspection and maintenance made possible by top-entry design Temp: -196°C to 400°C
• Compliance with the most severe pollution-control regulations owing to (-320°F to 750°F)
Valbart low-emission valves
Refer to literature VBEEBR1009
or VBENBR1010 at flowserve.com/
library.
Your Partner in Safety – Valves for O2 Service

The inherent danger of oxygen and oxygen-enriched applications
poses particular safety hazards to your plant and personnel.
Flowserve can help mitigate these risks. Our global network of
oxygen-trained personnel is ready to work with you to ensure
the valves used in your process meet or exceed industry
requirements for safety and performance. Whether your
application calls for on-off or control valves, Flowserve
can provide consistently safe results.
VALVES | BALL
flowserve.com 31
Big Max BX2001
VALVES | BUTTERFLY
BUTTERFLY
Ideal for precision throttling and on-off applications, especially in lighter-weight piping
systems, the Flowserve family of butterfly valves is often specified for its versatility.
Outstanding throttling accuracy for process control is achieved through low-friction, erosion-
resistant sealing surfaces with very low operating torques. A broad range of applications
can be met via metal- and soft-seated designs as well as lined versions for corrosive and
hygienic applications.
Butterfly – Quick Reference

DN 50 to 900 PN 10 to 40 -73°C to 538°C

Big Max® BX2001 Double-Offset
NPS 2 to 36 Class 150 and 300 (-100°F to 1000°F)
DN 50 to 750 PN 10 to 400 -196°C to 649°C

Valdisk™ Double-Offset
DN 80 to 600 PN 20 to 260 -196°C to 820°C

TX3 Triple-Offset
DN 80 to 700 PN 10 to 40 -30°C to 350°C

Torex™ Triple-Offset
NPS 3 to 28 Class 150 and 300 (-22°F to 662°F)
DN 50 to 600 PN up to 10 177°C
BTV Lined
NPS 2 to 24 Up to 150 psi (350°F)
DN 50 to 600 PN 10 to 20 -10°C to 140°C

Slimseal® Lined
NPS 2 to 24 Class 125 to 150 (14°F to 284°F)
flowserve.com 33
BUTTERFLY
DOUBLE-OFFSET
Big Max BX2001

High-performance, all-purpose valve designed for precise throttling control or on-off service with lighter weight piping
systems and less expensive, energy-efficient actuators.
• Broad application versatility via numerous design options: wafer and lug bodies; SPECIFICATIONS
standard PFA, optional UHMWPE, fire-sealed, Apex and TriFlex seated versions; and Sizes: DN 50 to 900; NPS 2 to 36
multiple packing options Press: PN 10 to 40; Class 150 and 300
• Reduced fugitive emissions through triple-leak protection of primary stem seal plus Temp: -73°C to 538°C
two optional secondary seals (-100°F to 1000°F)
• Increased capacity and improved flow control with low-profile, double-offset disc
• Improved personnel and plant safety with anti-blowout protection per API 609 Refer to literature DVENTB0039
Durco at flowserve.com/library.
DOUBLE-OFFSET
Valdisk
Heavy-duty design engineered for high-capacity and low-pressure loss. Ideal for fibrous slurries, liquids, and gas and
steam applications under extreme pressures and temperatures.
• High-performance throttling, even in large pressure drops close to the seat, SPECIFICATIONS
enabled by high-thrust cylinder actuator coupled with eccentric-cammed disc Sizes: DN 50 to 750; NPS 2 to 30
• Greater throttling accuracy assured by low breakout torque provided by Jam-lever Press: PN 10 to 400; Class 150 to 2500
Toggle™ seating Temp: -196°C to 649°C
• Superior process control with bi-directional, bubble-tight shutoff at high and low (-320°F to 1200°F)
Valtek pressure drops
• Reduced maintenance costs made possible by double-offset disc design, which Refer to literature VLATB010
minimizes seat and disc wear plus reduces leakage at flowserve.com/library.
TRIPLE-OFFSET
TX3
The TX3 boasts reliable, long-lasting, zero-leakage shutoff — even in gas applications. It has obtained numerous industry
certifications, so it can be used around the world. Multiple valve body configurations available.
• Greater process control with API 598 Zero Leakage (bubble-tight) shutoff assured by SPECIFICATIONS
triple-offset design and laminated metal-graphite seat seal Sizes: DN 80 to 600; NPS 3 to 24
• Extended service life and outstanding throttling accuracy due to low operating torque Press: PN 20 to 260; Class 150 to 1500
resulting from the low-friction, low-wear elliptical sealing surfaces Temp: -196°C to 820°C
• Environmental compliance achieved by packing options that meet stringent fugitive (-320°F to 1500°F)
emissions requirements
Durco • Improved safety with API 607 fire-safe design plus API 609/ASME B16.34 anti-blowout Refer to literature DVENBR0061
shaft at flowserve.com/library.
VALVES | BUTTERFLY
TRIPLE-OFFSET
Torex
High-performance, triple-offset, metal- or soft-seated butterfly valve frequently used for isolation or on-off
applications, but equally suitable for control, especially on high-flow, low-pressure applications.
• Longer service life provided by triple-offset design, which minimizes seat wear SPECIFICATIONS
during opening and closing Sizes: DN 80 to 700; NPS 3 to 28
• Minimized pressure loss and low energy costs due to tight shut-off Press: PN 10 to 40 Class 150 and 300
• Low installation costs enabled by compact wafer design and low weight Temp: -30°C to 350°C (-22°F to 662°F)
• Improved safety assured by Safety Integrity Level (SIL) 3 and IEC 61508 certifications
• Increased uptime — even in difficult media and demanding pressures — through Refer to literature Fk41.42
excellent design, materials and performance characteristics at flowserve.com/library.
NAF
LINED
BTV
Reliable, leak-free service valve designed for a wide range of demanding requirements in corrosive chemical
applications and process industries.
• Reduced downtime through the standard lined body and disc that defends against SPECIFICATIONS
the most corrosive chemicals Sizes: DN 50 to 600; NPS 2 to 24
• Lower maintenance costs from the triple-seal design and live-loaded shaft seal Press: PN up to 10; up to 150 psi
that never needs adjustment Temp: up to 177°C (350°F)
• Increased application flexibility provided by a large selection of metal discs for
use when greater protection is required Refer to literature DVENBR0020
• Increased abrasion resistance in applications up to 93°C (200°F) with optional at flowserve.com/library.
Durco UHMWPE disc and body
LINED
Slimseal
High-performance, “fit and forget”, wafer-type valve with integrally molded body liner designed specifically for
corrosive services and hygienic applications.
• Increased uptime compared to loose liners resulting from integrally molded SPECIFICATIONS
elastomer body liner that is not prone to stretching Sizes: DN 50 to 600; NPS 2 to 24
• Low maintenance requirements from liner construction that is designed to last Press: PN 10 to 20; Class 125 to 150
throughout the entire valve life cycle Temp: -10°C to 140°C (14°F to 284°F)
• Reduced operating costs due to primary and secondary stem seal that prevents
ingress of foreign material into valve Refer to literature SRENTB0006
Serck Audco • Installation speed and simplicity enabled by a gasket that is integral to the body, at flowserve.com/library.
and the body liner that eliminates potential for damage to expensive seats
flowserve.com 35
TMCBV
36
VALVES | ROTARY CONTROL
ROTARY CONTROL
Long life in severe conditions characterizes this flexible range of plug, ball and butterfly
control valves. Precision control can be realized across a range of harsh applications,
including fibrous slurries, entrained particles, steam and high-pressure/temperature liquids
and gases. Users find numerous performance advantages, from reduced cavitation and
flashing to low noise levels, as well as safety assurances from tight shut-off features and
designs certified to the latest, global safety standards.
Rotary Control – Quick Reference

DN 25 to 300 PN 10 to 63 -100°C to 400°C
MaxFlo® 4 Eccentric Plug
DN 25 to 400 PN 10 to 63 -46°C to 316°C

ShearStream™ HP Segmented Ball
DN 25 to 700 PN 10 to 40 -30°C to 250°C

Setball™ Segmented Ball
DN 25 to 250 PN 10 to 40 -30°C to 250°C

Setball SF Segmented Ball
High-Performance DN 50 to 750 PN 10 to 400 -196°C to 649°C

Valdisk Butterfly NPS 2 to 30 Class 150 to 2500 (-320°F to 1200°F)
High-Performance DN 80 to 700 PN 10 to 40 -30°C to 350°C

Torex Butterfly NPS 3 to 28 Class 150 and 300 (-22°F to 662°F)
Trunnion-Mounted DN 75 to 1400 Class 150 to 2500 -196°C to 450°C

TMCBV Control Ball NPS 3 to 56 API 3000, 5000, 10 000 (-320°F to 842°F)
Trunnion-Mounted DN 150 to 900 PN 10 to 40 -30°C to 250°C

Trunnball DL Control Ball NPS 6 to 36 Class 150 to 300 (-22°F to 482°F)
DN 8 to 100 PN 20 to 110 -29°C to 427°C

CPT Floating Control Ball
NPS ¼ to 4 Class 150 to 600 (-20°F to 800°F)
DN 25 to 400 PN 10 to 40 -30°C to 350°C

Duball DL Floating Control Ball
flowserve.com 37
ROTARY CONTROL
ECCENTRIC PLUG
MaxFlo 4
Cost-competitive, high-performance general service control valve designed for applications demanding higher rangeability,
precise control and higher flow capacity.
• Economical performance with the highest rated Cv (as much as 70% more than SPECIFICATIONS
competitors), which sometimes allows for smaller sizes to be used Sizes: DN 25 to 300; NPS 1 to 12
• Longer service life and more precise control enabled by the robust polygon Press: PN 10 to 63; Class 150 to 600
shaft/plug connection Temp: -100°C to 400°C
• Low maintenance costs due to double-offset eccentric plug design that reduces (-148°F to 750°F)
seat wear while providing reliable Class IV (metal seat) and VI (soft seat) shutoff
Valtek Refer to literature VLENBR0064
• Improved safety with superior shaft blow-out protection from the ASME B16.34
shaft design at flowserve.com/library.
SEGMENTED BALL
ShearStream HP
Rugged segmented ball valve designed to withstand harsh, particle-entrained processes found in the power, chemical, and
oil and gas industries.
• Increased uptime enabled by a durable, long-lasting design that easily handles SPECIFICATIONS
abrasive, erosive and corrosive fluids Sizes: DN 25 to 400; NPS 1 to 16
• Broad application versatility enabled by exceptional control and rangeability Press: PN 10 to 63; Class 150 to 600
• High-capacity and large turndown performance due to unrestricted straight-through Temp: -46°C to 316°C (-50°F to 600°F)
port design
Valtek Refer to literature VLEEBR0027
• High-pressure drop capability with the optional spring-loaded, heavy-duty seat, which
provides reliable Class IV (metal seat) and Class VI (resilient UHMWPE seat) shutoff at flowserve.com/library.
SEGMENTED BALL
Setball
Cost-competitive general service V-port ball valve that offers excellent rangeability and high-flow capacity.
• High control accuracy over wide range and under severe conditions provided by SPECIFICATIONS
V-shaped sector Sizes: DN 25 to 700; NPS 1 to 28
• Low lifecycle and maintenance costs due to the ability to use low operating torque Press: PN 10 to 40; Class 150 to 300
actuators Temp: -30°C to 250°C (-22°F to 482°F)
• Versatile design that combines the best control characteristics of ball and butterfly
valves, allowing it to function as a control and shutoff valve Refer to literature Fk 41.51(19)
• Application versatility made possible by specialized materials and stem seal options at flowserve.com/library.
NAF
SEGMENTED BALL
Setball SF
Cost-effective general services V-port ball valve that combines compact size, excellent control characteristics and
high-flow capacity.
• Low total cost of ownership provided by compact face-to-face dimension and SPECIFICATIONS
weight reduction
Sizes: DN 25 to 250; NPS 1 to 10
• Lower operating costs due to dual low-friction bearings and specially designed
Press: PN 10 to 40; Class 150 to 300
seat that make it possible to use a smaller actuator
Temp: 30°C to 250°C (-22°F to 482°F)
• Environmental regulatory compliance enabled by one-piece, leak-proof, wafer-
style body that minimizes leakage paths Refer to literature NFENTB4156
• Optimum control performance provided by a stem with a splined transmission to at flowserve.com/library.
NAF the ball sector
• High-performance in a compact size due to direct actuator mounting
H I G H - P E R F O R M A N C E B U T T E R F LY
Valdisk
Heavy-duty design engineered for high-capacity and low-pressure loss. Ideal for fibrous slurries, liquids, and gas and
steam applications under extreme pressures and temperatures.
• High-performance throttling, even in large pressure drops close to the seat, SPECIFICATIONS
enabled by high-thrust cylinder actuator coupled with eccentric-cammed disc Sizes: DN 50 to 750; NPS 2 to 30
• Greater throttling accuracy assured by low breakout torque provided by Jam-lever Press: PN 10 to 400; Class 150 to 2500
Toggle™ seating Temp: -196°C to 649°C
• Superior process control with bi-directional, bubble-tight shutoff at high and low (-320°F to 1200°F)
Valtek pressure drops
• Reduced maintenance costs made possible by double-offset disc design, which Refer to literature VLATB010
minimizes seat and disc wear plus reduces leakage at flowserve.com/library.
H I G H - P E R F O R M A N C E B U T T E R F LY
Torex
High-performance, triple-offset, metal- or soft-seated butterfly valve. Frequently used for isolation or on-off
applications but equally suitable for control, especially on high-flow, low-pressure applications.
• Longer service life provided by triple-offset design which minimizes seat wear SPECIFICATIONS
during opening and closing Sizes: DN 80 to 700; NPS 3 to 28
• Cost-effectiveness provided by compact wafer design and low weight Press: PN 10 to 40; Class 150 and 300
• Improved safety assured by Safety Integrity Level (SIL) 3 and IEC 61508 Temp: -30°C to 350°C (-22°F to 662°F)
certifications
• Increased uptime — even in difficult media and demanding pressures — Refer to literature Fk 41.42(17)
NAF through excellent design, materials and performance characteristics
flowserve.com 39
ROTARY CONTROL
TRUNNION-MOUNTED CONTROL BALL
TMCBV
Cost-efficient, compact gas valve that provides excellent flow capacity and high rangeability.
• Improved plant and personnel safety through excellent noise attenuation provided by SPECIFICATIONS
industry-proven technologies Sizes: DN 75 to 1400; NPS 3 to 56
• Installation ease in tight piping runs enabled by small valve size Press: Class 150 to 2500;
• Cost savings due to small actuator and lightweight pipe supports API 3000, 5000 and 10 000
• High-flow capacity offered in compact design via small valve and actuator sizes, Temp: -196°C to 450°C
system support and isolation (-320°F to 842°F)
Valbart
Refer to literature VLENBR0067
TRUNNION-MOUNTED CONTROL BALL
Trunnball DL
Full-port process ball valve well suited for the most challenging operating conditions. Frequently used for isolation or on-off
applications, but equally suitable for control.
• Improved plant and personnel safety provided by the Z-trim option’s excellent SPECIFICATIONS
cavitation control and noise reduction Sizes: DN 150 to 900; NPS 6 to 36
• Reduced maintenance enabled by spring-loaded stem seal packing Press: PN 10 to 40; Class 150 to 300
• Broad application flexibility facilitated by the extensive size range Temp: -30°C to 250°C (-22°F to 482°F)
• Optimum controllability through the use of a sturdy blowout-proof stem that provides
Refer to literature NFENTB4168
NAF high torque transmission with minimal mechanical backlash
F L O AT I N G C O N T R O L B A L L
CPT
Rugged and accurate general service valve designed for use in harsh throttling conditions and applications requiring
precise computer controls.
• Extremely accurate control through efficient, straight-through flow, rotary shaft sealing SPECIFICATIONS
and bubble-tight shutoff Sizes: DN 8 to 100; NPS ¼ to 4
• Smooth, stable throttling control due to lubricating action of special coating on ball Press: PN 20 to 110; Class 150 to 600
and TFE/graphite impregnation throughout the thickness of the characterized seat Temp: -29°C to 427°C (-20°F to 800°F)
• Reduced maintenance costs and time due to the use of fewer parts
Worcester • Precise fit to match unique control needs through virtually limitless seat designs Refer to literature WCENBR1001
F L O AT I N G C O N T R O L B A L L
Duball DL
Rugged, high-performance general service valve designed for operating conditions where severe demands are made
on the design, materials and performance. Available with metal or soft seats.
• Lower maintenance costs and time as well as improved safety with spring-loaded SPECIFICATIONS
stem seal packing Sizes: DN 25 to 400; NPS 1 to 16
• High performance enabled by the direct actuator mounting capabilities of the Press: PN 10 to 40; Class 150 to 300
Turnex actuator Temp: -30°C to 350°C (-22°F to 482°F)
• Excellent control, noise reduction and cavitation enabled by unique Z-trim option
• Easy installation and replacement as a result of the off-center joint face of the Refer to literature NFENTB4167
NAF at flowserve.com/library.
valve body
Fast and Accurate Valve Selection and Sizing

Significantly reduce control valve sizing and selection errors and improve
decision accuracy in record time with Performance!™ Valve Sizing
and Selection Suite. It puts the power of on-demand control valve
selection and sizing at your fingertips. With minimal application
data — expected flow, pressure, temperature, process media
and line size — Performance! identifies the Flowserve control
valve, actuators and positioners best suited for your application
and services conditions. It’s the right tool for the finding the
right product — the first time, every time.
flowserve.com 41
Mark One
42
VALVES | LINEAR CONTROL
LINEAR CONTROL
Ideal for high-accuracy flow control, the Flowserve family of globe/angle linear control valves
can be applied from general service to severe applications for both gas and liquids. They
are ideal for frequent operation due to their excellent position accuracy and repeatability.
Precision control is repeatedly achieved via longer strokes and assured actuator response.
Users can satisfy a range of requirements, with choices ranging from cryogenic designs to
low noise and anti-cavitation trims.
Linear Control – Quick Reference

DN 15 to 915 PN 10 to 400 -196°C to 815°C

Mark One™ Linear Globe/Angle
Mark One DN 15 to 300 PN 10 to 400 -196°C to 400°C

Linear Globe/Angle
Three-Way NPS ½ to 12 Class 150 to 2500 (-320°F to 1500°F)
to DN 300 PN 50 to 100 -196°C to 815°C

Mark One-X Linear Globe/Angle
to NPS 12 Class 300 to 600 (-320°F to 1500°F)
DN 150 to 750 PN 10 to 100 -196°C to 815°C

Mark 100 Linear Globe/Angle
DN 50 to 400 PN 160 to 400 -196°C to 815°C

Mark 200 Linear Globe/Angle
DN 15 to 150 PN 10 to 400 -196°C to 815°C

Mark Two™ Linear Globe/Angle
DN 25 to 500 PN 10 to 400 -196°C to 815°C

Mark Eight™ Linear Globe/Angle
DN 15 to 150 PN 16 to 40 -60°C to 400°C

GS Linear Globe/Angle
flowserve.com 43
LINEAR CONTROL
LINEAR GLOBE/ANGLE
Mark One
Superior performance in liquid and gaseous services, with easy, fast and inexpensive maintenance.
• Reliable performance provided by the position accuracy, repeatability and assured SPECIFICATIONS
response from the positioner plus the stiff and high-thrust, spring-cylinder actuator Sizes: to DN 300; to NPS 12
• Significant application flexibility offered by a broad solutions envelope and a wide Press: PN 10 to 400; Class 150 to 2500
variety of trim options to eliminate cavitation damage and abate noise Temp: -196°C to 815°C
• Installation and maintenance ease resulting from compact, light-weight package (-320°F to 1500°F)
• Lower maintenance and spare inventory costs facilitated by the clamped-in seat and
top-entry trim plus a high degree of parts interchangeability Refer to literature VLENTB0001
Valtek
LINEAR GLOBE/ANGLE
Mark One Three-Way

A three-way version of the Mark One, this valve is used for combining or diverting service. Like the Mark One, it offers
superior performance in liquid and gaseous services in simple, rugged design.
• Reliable performance provided by the position accuracy, repeatability and assured SPECIFICATIONS
response from the positioner plus the stiff and high-thrust, spring-cylinder actuator Sizes: DN 15 to 300; NPS ½ to 12
• Enhanced process control due to exceptionally tight shutoff Press: PN 10 to 400; Class 150 to 2500
• Reduced inventory carrying costs owing to a high degree of interchangeability with Temp: -196°C to 400°C
Mark One Series valves (-320°F to 752°F)
• Fast, easy and inexpensive maintenance facilitated by compact, lightweight body and
Refer to literature VLENTB0001
Valtek actuator package plus clamped-in seat and top-entry trim
LINEAR GLOBE/ANGLE
Mark One-X
The Mark One-X offers a cost-effective means of installing a small valve in a much larger line without line reducers or
expanders. It is identical to a standard Mark One except for its body, which has expanded outlets.
• Lower valve and installation costs made possible by using a smaller, lighter valve SPECIFICATIONS
and eliminating line expanders and reducers (plus their associated welding and Sizes: DN up to 300; NPS up to 12
radiography requirements) Press: PN 50 to 100; Class 300 to 600
• Reliable performance provided by the position accuracy, repeatability and assured Temp: -196°C to 815°C
response from the positioner plus the stiff and high-thrust, spring-cylinder actuator (-320°F to 1500°F)
• Reduced downtime with clamped-in seat and self-aligning seat ring
Refer to literature VLATB100
Valtek • Decreased inventory carrying costs from a high degree of interchangeability with
Mark One Series valves at flowserve.com/library.
LINEAR GLOBE/ANGLE
Mark 100
A large control valve designed for larger size applications. Suited for maximum capacity Cv and severe applications in
both gas and liquid services.
• Cost-effective performance, as higher Cv capacity allows for smaller valve sizes SPECIFICATIONS
• Superior process control made possible by long stroke lengths, the position Sizes: DN 150 to 750; NPS 6 to 30
accuracy, repeatability and assured response from the positioner, and the stiff and Press: PN 10 to 100; Class 150 to 600
high-thrust, spring-cylinder actuator Temp: -196°C to 815°C
• Reduced downtime with the clamped-in seat and self-aligning seat ring (-320°F to 1500°F)
• Severe service application versatility provided by a wide variety of noise
Refer to literature FCATB0100
Valtek abatement and anti-cavitation trims
LINEAR GLOBE/ANGLE
Mark 200
Designed for gas and liquid control while significantly reducing noise and cavitation. Ideal for high-flow, high-pressure
and extreme temperature applications in the oil and gas and power industries.
• Cost-effective and significantly smaller and lighter design that outperforms SPECIFICATIONS
competing brands Sizes: DN 50 to 400; NPS 2 to 16
• Greater severe service protection with finer control provided by larger galleries Press: PN 160 to 400;
and longer strokes Class 900 to 2500
• Improved safety and reduced maintenance costs derived from a broad spectrum Temp: -196°C to 815°C
of severe service trim solutions for noise abatement and cavitation control (-328°F to 1500°F)
Valtek • Easy, low-cost maintenance and extremely tight shutoff made possible by the
clamped-in seat and self-aligning seat ring Refer to literature VLENTB0200
Giants of Offshore Production

When building the world’s largest FPSOs, capable of producing
500 000 barrels of oil per day, ExxonMobil chose Flowserve
pump and valve control systems for its Kizomba A and B floating
platforms. Drawing on decades of offshore experience,
Flowserve provided 74 high-performance pump systems
and 360 control valves. Most were custom engineered to
accommodate the weight and space parameters of
the project.
flowserve.com 45
LINEAR CONTROL
LINEAR GLOBE/ANGLE
Mark Two
Fabricated from bar stock, the Mark Two is an extremely versatile automatic control valve. It is available in many different
configurations with short lead times, even in high-pressure classes or special alloys.
• Application versatility arising from numerous body styles, end connections, bonnet SPECIFICATIONS
types and materials of construction Sizes: DN 15 to 150; NPS ½ to 6
• Reduced maintenance owing to top-entry trim with clamped-in seat ring and double Press: PN 10 to 400; Class 150 to 2500
stem-guided design, which eliminates contact between the plug and seat retainer Temp: -196°C to 815°C
• Parts interchangeability with Mark One Series valves (-320°F to 1500°F)
• Available cryogenic extended bonnet handles temperatures down to -253°C (-423°F)
Refer to literature VLATB106
Valtek
LINEAR GLOBE/ANGLE
Mark Eight
The Mark Eight features a unique Y-style globe body that provides higher flow capacities and less process turbulence than
conventional globe valves.
• Lower valve recovery factor and higher Cv per given size over traditional globe style SPECIFICATIONS
valves due to the nearly straight-through passage of the Y-style body Sizes: DN 25 to 500; NPS 1 to 20
• Significantly reduced noise and vibration owing to less restrictive body style, which Press: PN 10 to 400; Class 150 to 2500
generates less line turbulence Temp: -196°C to 815°C
• Easy, low-cost maintenance and extremely tight shutoff made possible by clamped-in (-320°F to 1500°F)
seat and self-aligning seat ring
• Decreased inventory carrying costs from a high degree of interchangeability with Refer to literature VLENTB0008
Valtek Mark One Series valves at flowserve.com/library.
LINEAR GLOBE/ANGLE
Valtek GS
A fully integrated valve-actuator-instrumentation package for continuous process, general service flow loop control
throughout the plant.
• Low total cost of ownership derived from an integrated package combining a GS linear SPECIFICATIONS
globe valve, Logix 420 digital positioner and FlowAct pneumatic diaphragm actuator Sizes: DN 15 to 150; NPS ½ to 6
• Smaller and lighter design that outperforms competing brands Press: PN 16 to 40; Class 150 to 300
• Broad application versatility enabled by excellent control accuracy, rangeability and Temp: -60°C to 400°C (-76°F to 752°F)
repeatability
• Quick installation and simple setup by maintenance technicians without the need for Refer to literature VLENTB0300
Valtek instruments or process engineering skills; off-the-shelf availability worldwide
47
flowserve.com
Mark 100
with Stealth trim
48
VALVES | SEVERE SERVICE CONTROL
SEVERE SERVICE CONTROL
Longer service life and lower maintenance costs are made possible through precision-
engineered valve and trim options — even in corrosive, erosive and high-velocity
applications. A range of advanced anti-erosion, noise reduction and anti-cavitation
selections neutralizes the detrimental wear and tear that too often reduce valve life or lead
to failures. Maximum flexibility is achieved through severe service products that incorporate
a range of material, pressure and temperature options.
Severe Service Control – Quick Reference*

DN 25 to 600 PN 20 to 420 -10°C to 400°C

Survivor™ Anti-Erosion
NPS 1 to 24 Class 150 to 2500 (14°F to 752°F)
* Additional products shown on next page
flowserve.com 49
Severe Service Control – Quick Reference, cont’d.
Product Sub-Type Base Valve Sizes Kv (Cv) Range
DN 25 to 900 4 to 8737
MegaStream™ Noise Reduction Valtek Mark Series
NPS 1 to 36 (5 to 10 100)
DN 80 to 900 to 3547
Stealth™ Noise Reduction Valtek Mark Series
NPS 3 to 36 (4100)
TMCBV C2, N2 DN 80 to 1400 117 to 77 850

Noise Reduction Valbart TMCBV
and Z2 NPS 3 to 56 (135 to 90 000)
Setball, Duball DL DN 40 to DN 500;

Z-Trim™ Noise Reduction
and Trunnball DL NPS 1.5 to 20
58 to 25 537
DN 25 to 600 1.3 to 865

CavControl™ Cavitation Control Valtek Mark Series
NPS 1 to 24 (1.5 to 1000)
DN 40 to 900 5 to 623
ChannelStream™ Cavitation Elimination Valtek Mark Series
NPS 1½ to 36 (6 to 720)
DN 40 to 400 2 to 1773
DiamondBack™ Cavitation Elimination Valtek Mark Series
NPS 1½ to 16 (3 to 2050)
DN 15 to 100 0.078 to 8.425

SideWinder™ Cavitation Elimination Valtek Mark Series
NPS ½ to 4 (0.09 to 9.74)
ANTI-EROSION
Survivor
Reliable solutions designed for use in the harshest conditions — erosion, corrosion, slurry, high-velocity, and even
flashing applications.
• High-flow capacity ensured by sweep angle design that minimizes particle SPECIFICATIONS
erosion damage on the body Sizes: DN 25 to 600; NPS 1 to 24
• Reduced maintenance and longer service life enabled by oversized gallery that Press: PN 20 to 420; Class 150 to 2500
decreases fluid velocity, minimizing erosion damage Temp: -10°C to 400°C (14°F to 752°F)
• Reliable, long-lasting performance made possible with optional ceramic trim
materials, providing the highest level of erosion resistance, even in flashing sonic Refer to literature VLENTB0036
velocity flow with abrasive solids at flowserve.com/library.
Valtek • Application-specific efficiency assured by custom-engineering
NOISE REDUCTION
MegaStream
MegaStream reduces control valve noise and vibration in a wide range of gas applications through staging, frequency
shifting, attenuation and velocity control.
• Improved personnel safety due to noise attenuation up to 30 dBa SPECIFICATIONS

• Longer valve and system life enabled by reducing downstream noise and vibration Base Valve: Valtek Mark Series
• Cost-effective, reliable and long-lasting performance derived from heavy-duty, Sizes: DN 25 to 900; NPS 1 to 36
nested cylinder design Kv (Cv) Range: 4 to 8737 (5 to 10 100)
• Low installation costs enabled by interchangeability with standard Mark Series Flow Direction: Under the plug
seat retainers Pressure Stages: 1 to 7
Valtek
Refer to literature FCENBR0067
NOISE REDUCTION
Stealth
Stealth combines new advances in noise control with proven technologies to create the most effective device capable
of eliminating noise in the most demanding services.
• Improved personnel safety due to significant noise reduction — by as much SPECIFICATIONS

as 40 dBa — resulting from the combined effect of six noise-, velocity- and Base Valve: Valtek Mark Series
pressure-control mechanisms Sizes: DN 80 to 900; NPS 3 to 36
• Longer valve and system life enabled by reducing downstream noise and vibration Kv (Cv) Range: to 3547 (4100)
• Increased valve capacity due to optimized flow path, which reduces exit turbulence Flow Direction: Under the plug
• Cost-competitive solution made possible by stacked disc construction Pressure Stages: 6 to 20
Valtek
flowserve.com 51
SEVERE SERVICE CONTROL
NOISE REDUCTION
TMCBV C2, N2 and Z2

These economical trim options offer cavitation- and noise-control options based on proven Flowserve MegaStream,
CavControl and ChannelStream technologies.
• Broad application flexibility enabled by TMCBV system, offering a wide range of SPECIFICATIONS
exclusive trims for liquid and gas applications Base Valve: Valbart TMCBV
• Reduced maintenance via self-cleaning trims (Z and N Series) Sizes: DN 75 to 1400; NPS 3 to 56
• Lower total cost of ownership made possible by smaller, lighter valves requiring less Kv (Cv) Range: 117 to 77 850
expensive actuators and pipe supports (135 to 90 000)
• Greater personnel safety from noise attenuation of 20 to 30 dBA Pressure Stages: 1 to 4
Valbart
or VBENTB0068 at flowserve.com/
library.
NOISE REDUCTION
Z-Trim
Z-Trim combines the benefits of an advanced control valve with the simplicity of a ball valve. Most effective with low
to medium pressure drops, the Z-Trim excels at eliminating noise in high flow services.
• Innovative ball trim design provides effective noise attenuation where pressure SPECIFICATIONS
drops are high, and still delivers the high capacity expected from a ball valve Base Valve: Setball, Duball DL
• Improved personnel safety due to noise attenuation up to 17 dBa and Trunnball DL
• Increased reliability and reduced maintenance in applications with entrained Sizes: DN 40 to 500; NPS 1.5 to 20
media owing to self-cleaning design Cv Range: 58 to 25 537
• Installation and retrofit costs are kept low, as only one part must be changed
NAF Flow Direction: Bidirectional
Pressure Stages: 1 to 5
C AV I TAT I O N C O N T R O L
CavControl
A cost-effective trim that minimizes cavitation damage to valve components with a special seat retainer that controls
the location and concentrates vapor bubble implosion away from metal parts.
• Lower maintenance costs plus improved reliability, performance and service life SPECIFICATIONS
due to innovative design that controls damage by isolating cavitation away from Base Valve: Valtek Mark Series
metal components Sizes: DN 25 to 600; NPS 1 to 24
• Low cost of ownership and simplified maintenance made possible by high degree Kv (Cv) Range: 1.3 to 865 (1.5 to 1000)
of parts interchangeability with other valve models Flow Direction: Over the plug
• Broad application versatility enabled by characterization option
Valtek Pressure Stages: 1
C AV I TAT I O N E L I M I N AT I O N
ChannelStream
ChannelStream trim prevents cavitation from forming and minimizes hydrodynamic noise in the most severe liquid
applications.
• Reduced maintenance and extended service life assured by cavitation-eliminating SPECIFICATIONS

design, even in the most difficult applications Base Valve: Valtek Mark Series
• Increased efficiency from staged pressure drops Sizes: DN 40 to 900; NPS 1½ to 36
• Low cost of ownership made possible by high degree of parts interchangeability with Kv (Cv) Range: 5 to 623 (6 to 720)
conventional Mark One valves Flow Direction: Over the plug
• Broad application flexibility available with characterization option Pressure Stages: 2 to 6
Valtek
DiamondBack
The most technologically advanced anti-cavitation design in the industry, the Valtek DiamondBack uses staged
pressure drops to eliminate cavitation, even in the most demanding services.
• Reduced maintenance and long service life assured by cavitation-eliminating SPECIFICATIONS

design, which minimizes damage, even in the most difficult applications Base Valve: Valtek Mark Series
• Low cost of ownership and extended service life from erosion-minimizing design Sizes: DN 40 to 400; NPS 1½ to 16
• Even greater service life with optional tungsten carbide trim that also minimizes Kv (Cv) Range: 2 to 1773 (3 to 2050)
damage from erosion Flow Direction: Over the plug
• Quick and easy maintenance enabled by easy-to-clean stacked disc design Pressure Stages: 3 to 6
Valtek
SideWinder
SideWinder is a unique solution that delivers durable multi-stage cavitation elimination and precision control in high
pressure drop, small flow applications.
• Reduced maintenance and extended service life assured by cavitation-eliminating SPECIFICATIONS

design, even in the most difficult applications. Base Valve: Valtek Mark Series
• Capable of eliminating cavitation in high pressure drop, small flow applications. Sizes: DN 15 to 100; NPS ½ to 4
• Capable of tolerating small particulate. Kv (Cv) Range: 0.078 to 8.425
• Axial flow design with low clearance flow for precise control at low openings. (0.09 to 9.74)
Flow Direction: Over the Plug
Valbart Pressure Stages: 5 to 18
Refer to literature FCENBR0068 at
flowserve.com 53
Equiwedge
MSIV/MFIV
54
VALVES | GATE
GATE
Reliable, tight shutoff and low-pressure drop operation characterize the Flowserve range
of gate valves. Flexible wedge, split wedge, slab gate and double-disk configurations cover
a range of requirements to meet any user need, from general service to severe conditions
with gross thermal transients or dual-phase fluids. Plant personnel are kept safe through
the application of fast-acting valves manufactured to ASME B16.34, ASME Section III
and RCC-M design codes.
Gate – Quick Reference

Equiwedge™ DN 100 to 1050 PN 110 to 420 -29°C to 566°C

Flexible Split Wedge
MSIV/MFIV NPS 4 to 42 Class 600 to 2500 (-20°F to 1050°F)
DN 65 to 900 PN 110 to 610 -29°C to 650°C

Equiwedge Flexible Split Wedge
DN 65 to 600 PN 20 to 260 -29°C to 566°C

Flex Wedge Flexible Wedge
DN 15 to 600 PN 20 to 325 -29°C to 566°C

Double Disk Parallel Slide
DN 15 to 50 PN 20 to 140 -29°C to 566°C

Split Wedge Split Wedge
DN 50 to 1600 PN 20 to 420 -100°C to 400°C

Slab Gate Slab
flowserve.com 55
GATE
FLEXIBLE SPLIT WEDGE
Equiwedge MSIV/MFIV
Compliant with ASME Section III and RCC-M design codes, this valve is the industry standard for fast-acting, reliable
isolation of main steam or feedwater lines.
• Plant and personnel safety assured by verifiable gas/hydraulic actuator design, which SPECIFICATIONS
can close the valve within 3–5 seconds of receipt of signal Sizes: DN 100 to 1050; NPS 4 to 42
• Maximized actuator readiness made possible by self-contained energy storage and Press: PN 110 to 420;
critical component redundancies Class 600 to 2500
• Extended service life enabled by simplified modular design with no external hose or Temp: -29°C to 566°C
piping connections and a 12-year maintenance cycle (-20°F to 1050°F)
• Environmental and functional qualifications per IEEE and ASME QME-1 requirements
Edward Refer to literature EVENCT0004
FLEXIBLE SPLIT WEDGE
Equiwedge
A large-bore gate valve with body-guided split wedges, offering superior leak tightness and performance.
• Maximized MTBF and lower total cost of ownership derived from optimized SPECIFICATIONS
component flexibility that reduces component stress from thermal binding Sizes: DN 65 to 900; NPS 2½ to 36
• Minimized valve leakage enabled by disk guidance and optimized gate design, Press: PN 110 to 610;
ensuring tight seating Class 600 to 3600
• Longer component life with cast and forged offerings incorporating the latest in hard- Temp: -29°C to 650°C
facing welding processes (-20°F to 1200°F)
Edward Refer to literature EVENBR1005
FLEXIBLE WEDGE
Flex Wedge
Flexible wedge gate valve with a single-piece optimized gate designed to minimize seat leakage.
• Broad versatility of nuclear applications enabled by a wide range of sizes and SPECIFICATIONS
pressure classes Sizes: DN 65 to 600; NPS 2½ to 24
• Additional versatility ensured by compatibility with most actuation methods, including Press: PN 20 to 260; Class 150 to 1500
handwheel/bevel gear, electric, pneumatic and hydraulic Temp: -29°C to 566°C
• Reliable operation under extreme plant scenarios ensured by seismic qualifications (-20°F to 1050°F)
Refer to literature EVENCT0004

Anchor/Darling at flowserve.com/library.
VALVES | GATE
PARALLEL SLIDE
Double Disk
Providing tight shutoff under the most severe conditions, this exclusive disk and wedge design resists effects of
extreme temperature, gross thermal transients, high and low differential pressures, and dual-phase fluids.
• Improved personnel safety made possible by bonnet design, which allows easy SPECIFICATIONS
access to valve internals while minimizing radiation exposure Sizes: DN 15 to 600; NPS ½ to 24
• Reliable closing, smooth operation and long service life enabled by design that Press: PN 20 to 325; Class 150 to 1888
minimizes accumulation of sediment and sludge Temp: -29°C to 566°C
• Lower maintenance time and costs thanks to simple part design, parts (-20°F to 1050°F)
interchangeability and in-line maintenance capability
SPLIT WEDGE
Split Wedge
Compact gate valve design with body-guided, two-piece gates provides reliable operation and sealing.
• Reliable sealing assured by brazed-in seat SPECIFICATIONS

• Economical performance from rugged design that smoothes flow transitions to Sizes: DN 15 to 50; NPS ½ to 2
minimize flow turbulence Press: PN 20 to 140; Class 150 to 800
• Longer service life from stronger, oversized stem and graphite packing, providing Temp: -29°C to 566°C
stronger disc-to-stem connection and less wear (-20°F to 1050°F)
• Reduces cost and maintenance with ADVanseal pressure sealing system, which
eliminates leakage Refer to literature EVENCT0004
SLAB
Slab Gate
Cost-competitive, high-performance general service control valve designed for applications demanding higher
rangeability, precise control and higher flow capacity.
• Economical performance with the highest rated Cv (up to 70% more than SPECIFICATIONS
competitors), which sometimes allows for smaller sizes to be used Sizes: DN 25 to 300; NPS 1 to 12
• Longer service life and more precise control enabled by the robust polygon Press: PN 10 to 63; Class 150 to 600
shaft/plug connection Temp: -100°C to 400°C
• Low maintenance costs due to double-offset eccentric plug design that reduces (-148°F to 750°F)
seat wear while providing reliable Class IV (metal seat) and VI (soft seat) shutoff
• Improved safety with superior shaft blow-out protection from the ASME B16.34 Refer to literature VLENBR0064
Valbart at flowserve.com/library.
shaft design
flowserve.com 57
Univalve
58
VALVES | GLOBE
GLOBE
Maintaining a safe plant environment and extending service life — that’s what’s engineered
into every Flowserve globe valve. Whether it’s fail-safe response in nuclear plants or reliable
performance in high-temperature/pressure boiler plant services, every Flowserve globe
valve incorporates special features to maximize performance. Optimized flow passages and
smooth transitions reduce pressure drop and destructive turbulence.
Globe – Quick Reference*

Flite-Flow® Main DN 600 to 850 PN 110 to 260 -29°C to 565°C

Y-Pattern
Steam Isolation NPS 24 to 34 Class 600 to 900 (-20°F to 1050°F)
DN 65 to 800 PN 50 to 760 -29°C to 650°C

Flite-Flow Y-Pattern
DN 15 to 100 PN 290, 460 and 760 -29°C to 816°C

Univalve® Y-Pattern
NPS ½ to 4 Class 1690, 2680 and 4500 (-20°F to 1500°F)
Edward DN 8 to 50 PN 130 and 260 -29°C to 565°C

Y-Pattern
Bolted Bonnet NPS ¼ to 2 Class 800 and 1500 (-20°F to 1050°F)
DN 25 to 65 PN 50 to 420 -29°C to 565°C

Edward Blow-off Y-Pattern
NPS 1 to 2½ Class 300 to 2500 (-20°F to 1050°F)
DN 15 to 50 PN 20 to 325 -29°C to 371°C

1878 Y-Pattern Y-Pattern
Anchor/Darling DN 15 to 600 PN 20 to 260 -29°C to 565°C

Y-Pattern
Y-Pattern NPS ½ to 24 Class 150 to 1500 (-20°F to 1050°F)
flowserve.com 59
Globe – Quick Reference, cont’d.
Edward DN 15 to 50 PN 110 and 260 -29°C to 538°C

T-Pattern
Bolted Bonnet NPS ½ to 2 Class 600 and 1500 (-20°F to 1000°F)
DN 15 to 50 PN 20 to 325 -29°C to 371°C

1878 T-Pattern T-Pattern
Anchor/Darling DN 65 to 60 25 to 260 -29°C to 565°C

T-Pattern
T-Pattern NPI 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
VALVES | GLOBE
Y- PAT T E R N
Flite-Flow Main Steam Isolation

High-performance, service-proven technology designed for use when Y-pattern globe valves are chosen for
nuclear applications.
• Standards compliance achieved via construction per ASME Section III design code SPECIFICATIONS
• Plant and personnel safety assured by single-stored energy system, redundant Sizes: DN 600 to 850; NPS 24 to 34
control systems and verifiable 2–10-second, fail-safe response, regardless of Press: PN 110 to 260; Class 600 to 900
main steam system conditions or loss of electrical power Temp: -29°C to 565°C
• Increased reliability with functional verification prior to plant startup or (-20°F to 1050°F)
during outages
Edward • High efficiency due to optimized flow path plus integrated actuator
• Environmental and functional qualifications per IEEE requirements at flowserve.com/library.
Y- PAT T E R N
Flite-Flow
Reliable, stop and stop-check valve designed to provide maximum flow capacity and minimum leakage in
high-pressure, high-temperature applications.
• Increased uptime via engineered design with optimized flow passages to SPECIFICATIONS
minimize flow direction changes and reduce pressure drop Sizes: DN 65 to 800; NPS 2½ to 32
• High performance achieved by rigid body design to minimize body distortions and Press: PN 50 to 760; Class 300 to 4500
reduce leakage Temp: -29°C to 650°C
• Minimized leakage through precise disc alignment between disc and seat (-20°F to 1200°F)
• Longer service life from detached design that minimizes body stress for increased
Edward Refer to literature EVENCT0002
body and hard-facing lifetime
Y- PAT T E R N
Univalve
High-performance globe valve designed for maximum flow capacity and minimum leakage in high-pressure,
high-temperature applications.
• Increased uptime via engineered design with optimized flow passages to SPECIFICATIONS
minimize flow direction changes and reduce pressure drop Sizes: DN 15 to 100; NPS ½ to 4
• High performance achieved by rigid body design to minimize distortions and Press: PN 290, 460 and 760;
reduce leakage Class 1690, 2680 and 4500
• Minimized leakage between seat and disc through machined construction of body Temp: -29°C to 816°C
bore and hard-faced seat in a single operation to ensure tight seating (-20°F to 1500°F)
Edward • Longer service life from design that eliminates side thrust issues and prevents
misalignment, galling and stem bending Refer to literature EVENCT0001
flowserve.com 61
GLOBE
Y- PAT T E R N
Edward Bolted Bonnet

Durable, high-performance small bore globe valve with a bolted-bonnet design for improved maintenance.
• Increased uptime from construction material hardness with a low coefficient of friction SPECIFICATIONS
that results in reduced torque, minimal stem wear and elimination of galling Sizes: DN 8 to 50; NPS ¼ to 2
• Lower maintenance costs due to bolted bonnet, four-bolt design Press: PN 130 and 260
• Longer service life from integral hardened seat and secondary stem which provide Class 800 and 1500
positive shutoff, extended seat life and leak protection Temp: -29°C to 565°C
• Improved plant and personnel safety through rugged, knobbed hand wheel that (-20°F to 1050°F)
provides sure grip, even when wearing gloves
Edward
Y- PAT T E R N
Edward Blow-off
High-performance, blow-off valve designed for applications requiring intermittent operation to remove accumulated
sediment from equipment and piping, or rapidly lower the boiler water level.
• Standards compliance assured by design that meets ASME boiler code criteria in a SPECIFICATIONS
wide variety of applications Sizes: DN 25 to 65; NPS 1 to 2½
• Increased reliability via forged steel construction that withstands the rigors of Press: PN 50 to 420; Class 300 to 2500
intermittent use Temp: -29°C to 565°C
• High-pressure, high-temperature performance assured through design, construction (-20°F to 1050°F)
Edward material graduations through increasing class sizes
Y- PAT T E R N
1878 Y-Pattern
Versatile, reliable Y-pattern globe valve designed with ideal size and weight parameters to deliver maximum utility when
new or replacement Class 150 to 1878 valves are required.
• Lower operating costs and high inventory flexibility due to versatility of one valve SPECIFICATIONS
designed to operate in three pressure classes Sizes: DN 15 to 50; NPS ½ to 2
• Standards compliance assured by design that meets ASME Section III, Class 1, 2 and 3 Press: PN 20 to 325; Class 150 to 1878
design codes Temp: -29°C to 371°C (-20°F to 700°F)
• Increased durability via a one-piece, low-profile, investment cast body/yoke assembly
that results in smooth flow passages Refer to literature ADENBR0002
Anchor/Darling • Reduced maintenance with T-head stem design that enables easy changing of disc
• Functional qualifications per pressure Class 1878 (intermediate) requirements
VALVES | GLOBE
Y- PAT T E R N
Anchor/Darling Y-Pattern
High-performance, investment cast globe valve designed to minimize destructive turbulence in a variety of demanding
throttling applications.
• Increased uptime via large radius curves in body design to ensure smooth SPECIFICATIONS
transitions and eliminate abrupt changes in fluid direction Sizes: DN 15 to 600; NPS ½ to 24
• Lower maintenance costs enabled by no-weld design and rapid change kit Press PN 20 to 260; Class 150 to 1500
• Broad application versatility provided by Y, angle and Y-angle pattern valve options Temp: -29°C to 565°C
and wide range of pressure configurations (-20°F to 1050°F)
Anchor/Darling Refer to literature EVENCT0004
When and Where You Need Us

Flowserve customers never have to look far for support. Our
network of manufacturing facilities, design centers of
excellence, strategically located Quick Response Centers
and on-site customer resources ensures you’ll receive
timely responses to your critical repair needs,
engineering challenges, routine maintenance
support and product upgrade requirements. In
addition, our commitment to localization drives
employment and training, creating a skilled
workforce near our customers’ locations.
T- PAT T E R N

High-performance, small-bore stop valve designed with four-bolt, bolted-bonnet design for reliability and reduced
maintenance; angle pattern models are also available.
• Increased uptime from construction material hardness with a low coefficient of SPECIFICATIONS
friction that results in reduced torque, minimal stem wear and elimination of galling Sizes: DN 15 to 50; NPS ½ to 2
• Longer service life from integral hardened seat and secondary stem, which Press: PN 110 and 260;
provide positive shutoff, extended seat life and leak protection Class 600 and 1500
• Improved plant and personnel safety through rugged, knobbed hand-wheel that Temp: -29°C to 538°C
Edward provides sure grip, even when wearing gloves (-20°F to 1000°F)
• High-flow performance enabled by optimized flow passages that minimize flow
direction changes and reduce pressure drops Refer to literature EVENCT0001
flowserve.com 63
GLOBE
T- PAT T E R N
1878 T-Pattern
Rugged, one-piece, low-profile globe valve constructed with precision cast body/yoke assembly using the latest
investment casting techniques.
• Reduced maintenance with lower, non-rotating stem with T-head design that SPECIFICATIONS
facilitates disc removal and replacement Sizes: DN 15 to 50; NPS ½ to 2
• Standards compliance assured by design that meets ASME Section III, Class 1, 2 and Press: PN 20 to 325; Class 150 to 1878
3 design codes Temp: -29°C to 371°C (-20°F to 700°F)
• Increased durability via a one-piece, low-profile, investment-cast body/yoke assembly
that results in smooth flow passages Refer to literature EVENCT0004
• Application versatility provided by three disc styles: quick-open plug, parabolic and
cage type
T- PAT T E R N
Anchor/Darling T-Pattern
High-performance, cast-stop valve designed to minimize destructive turbulence in a variety of demanding
throttling applications.
• Increased uptime via large radius curves in body design to ensure smooth transitions SPECIFICATIONS
and eliminate abrupt changes in fluid direction Sizes: DN 65 to 600; NPS 2½ to 24
• Broad application versatility in high-temperature, high-pressure applications enabled Press: PN 20 to 260; Class 150 to 1500
by wide range of pressure and size options Temp: -29°C to 565°C
• Longer service life from body and plug designed to minimize cavitation (-20°F to 1050°F)
• Available with functional qualifications per pressure Classes 150 through 1500 for
Anchor/Darling Refer to literature EVENCT0004
nuclear service
VALVES | GLOBE
flowserve.com 65
Edward
Tilting Disk
66
VALVES | CHECK
CHECK
Leak-free, tight sealing, protection against reverse flow and minimal flow direction changes
are at the core of Flowserve check valve designs. A broad range of configurations that
includes piston, tilting disc, spring-loaded disc and dual-plate models meets the critical,
high-temperature/pressure demands of the world’s major industries. Customers can carefully
match application requirements through myriad valve body, seat and disc options.
Check – Quick Reference*

DN 65 to 800 PN 50 to 760 -29°C to 650°C

Flite-Flow Piston (Lift)
DN 15 to 100 PN 290, 460 and 760 -29°C to 816°C

Univalve Piston (Lift)
NPS ½ to 4 Class 1690, 2680 and 4500 (-20°F to 1500°F)
Edward DN 15 to 50 PN 110 to 260 -29°C to 538°C

Piston (Lift)
Bolted Bonnet NPS ½ to 2 Class 600 and 1500 (-20°F to 1000°F)
PN 110, 150, 260 and 325

1878 DN 15 to 50 38°C to 371°C
Piston (Lift) Class 600, 900, 1500
Piston Check NPS ½ to 2
and 1878
(100°F to 700°F)

Piston (Lift)
Piston (Lift) Check NPI 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
PN 110, 150, 260 and 325

1878 DN 15 to 50 -29°C to 371°C
Swing Class 600, 900, 1500 and
Swing Check NPS ½ to 2
1878
(-20°F to 700°F)

Swing
Swing Check NPI 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
flowserve.com 67
Check – Quick Reference, cont’d.
Edward DN 65 to 600 PN 110 to 760 -29°C to 650°C

Tilting Disk
Tilting Disk NPS 2½ to 24 Class 600 to 4500 (-20°F to 1200°F)

Tilting Disk
Tilting Disk NPS 2½ to 24 Class 150 to 1500 (-20°F to 1050°F)
DN 40 to 1000 PN 20 to 40 -30°C to 350°C

NAF Check Tilting Disk
VALVES | CHECK
PISTON (LIFT)
Flite-Flow
Rugged, large bore, cast body, piston check valve designed to operate in critical high-pressure and high-temperature
environments.
• Increased uptime and longer service life due to integral Stellite seating surfaces SPECIFICATIONS
• Improved reliability and service integrity via body-guided disc design to ensure Sizes: DN 65 to 800; NPS 2½ to 32
tight sealing and check valve protection in the event of fluid back flow Press: PN 50 to 760; Class 300 to 4500
• Superior flow performance enabled by streamlined flow shapes that reduce Temp: -29°C to 650°C
pressure drops and support full lift (-20°F to 1200°F)
Edward • Broad application versatility in high-temperature, high-pressure applications
enabled by wide range of pressure and size options
PISTON (LIFT)
Univalve
Reliable piston check valve designed for high-temperature and high-pressure uses in a variety of environments.
• Increased uptime from the use of anti-thrust rings in the body-guided disc, which SPECIFICATIONS
eliminates misalignment and galling Sizes: DN 15 to 100; NPS ½ to 4
• Greater process control due to integral hard-surfaced seat, which allows positive Press: PN 290, 460 and 760;
shutoff and seat life Class 1690, 2680 and 4500
• Enhanced service integrity through optimum flow shape that minimizes flow Temp: -29°C to 816°C
direction changes and pressure drops
Edward (-20°F to 1500°F)
• Lower operating costs enabled by a die-formed, flexible graphite gasket seated to
a prescribed bonnet torque that provides a reliable seal Refer to literature EVENCT0004
PISTON (LIFT)

Durable, small bore check valve, forged and equipped with a bolted cover design to enable easy maintenance.
• Increased uptime from the use of anti-thrust rings in the body-guided disc, which SPECIFICATIONS
eliminates misalignment and galling Sizes: DN 15 to 50; NPS ½ to 2
• Greater process control due to integral hard-surfaced seat, which allows positive Press: PN 110 and 260;
shutoff and extends seat life Class 600 and 1500
• Lower maintenance costs due to bolted bonnet, four-bolt design Temp: -29°C to 538°C
• Longer service life from positive metal-to-metal stop design that prevents over- (-20°F to 1000°F)
compression of the gasket
Edward • Optimized flow passages minimize flow direction changes and reduce pressure
drops
flowserve.com 69
CHECK
PISTON (LIFT)
1878 Piston Check

High-performance 1878 piston check valve designed for low leakage rate testing (LLRT) and available with EPR/EPDM
resilient seated discs.
• Lower operating and inventory costs due to versatility of one valve designed to SPECIFICATIONS
operate in three pressure classes Sizes: DN 15 to 50; NPS ½ to 2
• Standards compliance assured by design that meets ASME Section III, Class 1, 2 and Press: PN 110, 150, 260 and 325;
3 design codes Class 600, 900, 1500 and 1878
• Improved reliability and service integrity from investment cast body construction that Temp: -29°C to 371°C (-20°F to 700°F)
results in contoured, smooth flow path and high Cv
Anchor/Darling • Improved reliability enabled by lightweight disc and non-cobalt seat ring For more information, refer to
• Functional qualifications per pressure class 1878 (intermediate) requirements EVENCT0004.
PISTON (LIFT)
Anchor/Darling Piston (Lift) Check

Versatile lift check valves designed for low or pulsating flow applications where pressure drop through the valve is
not critical.
• Broad application flexibility provided by the variety of available body types SPECIFICATIONS
• High performance ensured by cast body with large radius curves designed to optimize Sizes: DN 65 to 600; NPI 2½ to 24
internal flow passages and minimize pressure drops Press: PN 20 to 260; Class 150 to 1500
• Improved reliability and service integrity via body-guided disc design to ensure tight Temp: -29°C to 565°C
sealing and check valve protection in the event of fluid back flow (-20°F to 1050°F)
Anchor/Darling • Rapid operation made possible by equalizer lines that connect the bonnet area above
the disc to the downstream port to improve disc lift and eliminate dash-pot effect Refer to literature EVENCT0004
Quality Defined by You

Flowserve quality systems are designed to align with the customer
definition of quality. We apply process-based, data-centric
methods to every level of our supply chain to ensure reliable
quality and timely fulfillment of order requirements. We call
this our Results-driven Initiative on Safety and Quality (RISQ),
and it comprises more than 3200 employees worldwide,
each committed to providing the quality products and
services your operations demand.
VALVES | CHECK
SWING
1878 Swing Check

Rugged, specialized swing check valve optimally designed for use in reactor penetration and isolation applications.
• Rapid disassembly/reassembly during maintenance and repair that minimizes SPECIFICATIONS

exposure to radiation Sizes: DN 15 to 50; NPS ½ to 2
• Environmental/regulatory compliance and improved plant safety due to ALARA- Press: PN 110, 150, 260 and 325;
compliant design Class 600, 900, 1500 and 1878
• Functional qualifications per ratings in accordance with ASME Section III, Class 1 Temp: -29°C to 371°C (-20°F to 700°F)
pressure class 1878 (intermediate) requirements
• Greater process control through available dual-seat disc design for leak-free Refer to literature EVENCT0004
sealing at both high- and low-pressure differentials
SWING
Anchor/Darling Swing Check Valve

All-purpose swing check valve provides economical reverse-flow protection for piping system applications where flow
is relatively constant.
• Broad application and installation versatility via option to install in horizontal or SPECIFICATIONS
vertical lines (with flow up) Sizes: DN 65 to 600; NPI 2½ to 24
• Low initial cost and low ongoing costs due to ease of maintenance Press: PN 20 to 260; Class 150 to 1500
• Functional qualifications per ratings in accordance with ASME Section III Temp: -29°C to 565°C
• Greater process control through available dual-seat disc design for leak-free (-20°F to 1050°F)
sealing at both high- and low-pressure differentials
Anchor/Darling • Reliable performance enabled by design that ensures tight sealing Refer to literature EVENCT0004
T I LT I N G D I S K
Edward Tilting Disk

Designed to close as quickly as possible, this large-bore valve minimizes loud, damaging slamming and vibration
noises caused by high-velocity reverse flow in high-pressure and high-temperature applications.
• Greater process control assured by precision-machined cover and integral SPECIFICATIONS

hard-surfaced seats Sizes: DN 65 to 600; NPS 2½ to 24
• Fast shutoff response facilitated by counterweighted dome-shaped disk, Press: PN 110 to 760;
low-friction pivots and enclosed torsion springs Class 600 to 4500
• Long, reliable service in high pressures and temperatures due to preloaded
Edward Temp: -29°C to 650°C
pressure-energized flexible graphite composite (-20°F to 1200°F)
• Easy installation and alignment made possible by adjustable hinge pin
flowserve.com 71
CHECK
Anchor/Darling Tilting Disk

Designed for applications requiring assured operability and controlled closure, the Anchor/Darling Tilting Disk check valve
also maintains the disc open in the best position to minimize pressure drop.
• High-efficiency performance from differential seat angles, ensuring better seal with SPECIFICATIONS
low seating force, plus hydrofoil profile for extra stability Sizes: DN 65 to 600; NPS 2½ to 24
• Longer service life enabled by valve design, which causes disc stops to impact body Press: PN 20 to 260; Class 150 to 1500
away from sealing surfaces Temp: -29°C to 565°C
Anchor/Darling • Reduced downtime via easily replaceable seal-welded seat rings that minimize (-20°F to 1050°F)
distortion from body stress
NAF Check
A cost-effective compact tilting disc check valve. Unique design gives excellent tightness and minimizes
water-hammering.
• Low total cost of ownership provided by compact face-to-face dimension — SPECIFICATIONS

invaluable where space is limited Sizes: DN 40 to 1000; NPS 1½ to 24
• Reduced handling costs and easier installation thanks to low weight Press: PN 20 to 40; Class 150 to 300
• Reliability and regulatory compliance assured by tightness that exceeds API 598 Temp: -30°C to 350°C (-22°F to 662°F)
standards
• Longer service life with optional spring, which reduces risk of damage from water- Refer to literature Fk 30.70 and
NAF hammer effect in liquid media Fk 30.71 at flowserve.com/library.
VALVES | CHECK
flowserve.com 73
Durco G4
74
VALVES | PLUG
PLUG
The range of plug valve applications is broad, and the Flowserve portfolio reliably addresses
the vast majority of requirements. High temperatures and pressures. Corrosive or dirty
media. Lethal, toxic and sub-zero fluids. Our family of plug valves delivers low energy
consumption through low-torque designs and safe operation with tight shutoff performance.
High levels of uptime are achieved through pressure-balanced designs. Absolute shutoff
requirements can be addressed by double-isolation models.
Plug – Quick Reference*

DN 25 to 200 PN 10, 16, 25, 40 and 100 -46°C to 274°C

Mach 1™ Non-Lubricated
NPS 1 to 8 Class 150, 300 and 600 (-50°F to 525°F)
DN 15 to 450 PN 10, 16, 25 and 40 -46°C to 288°C

G4 Non-Lubricated
NPS ½ to 20 Class 150 and 300 (-50°F to 550°F)
DN 15 to 450 PN 10, 16, 25 and 40 -46°C to 288°C

G4Z-HF Non-Lubricated
NPS ½ to 20 Class 150 and 300 (-50°F to 550°F)
Multiport Series NPS ½ to 12 PN 20 to 420; Class 150 to to 450°C

Lubricated
— Steel and Iron DN 15 to 300 2500; 150 to 400 CWP (iron) (232°F)
Super Nordstrom® NPS ½ to 4 -29°C to 177°C

Lubricated Class 150 to 600
— Steel DN 15 to 100 (-20°F to 350°F)
Bolted Gland NPS 6 to 36 -29°C to 177°C

Lubricated 120 to 500 CWP
— Iron DN 150 to 900 (-20°F to 350°F)
Bolted Gland NPS 6 to 12 -29°C to 177°C

Lubricated Class 150
— Steel DN 150 to 300 (-20°F to 350°F)
Dynamic Balance® NPS 4 to 20 -29°C to 177°C

— Iron DN 100 to 500 (-20°F to 350°F)
flowserve.com 75
Plug – Quick Reference, cont’d.
Dynamic NPS 1 to 30 -46°C to 816°C

Balance — Steel DN 25 to 750 (-50°F to 1500°F)
Super Nordstrom
NPS ½ to 5 -29°C to 93°C
Two-Bolt Cover — Lubricated
DN 15 to 125
200 CWP
(-20°F to 200°F)
Iron
Super Nordstrom
NPS ¾ to 4 -29°C to 93°C
Two-Bolt Cover — Lubricated
DN 20 to 100
13.7 bar (200 psi)
(-20°F to 200°F)
Steel
PN 20 to 420
DIPV — DN 15 to 600 -46°C to 375°C
Double-Isolation NPS ½ to 24
API 2000 to 10 000
(-51°F to 700°F)
Double-Isolation DN 50 to 300 -46°C to 232°C

— Steel NPS 2 to 12 (-50°F to 450°F)
Screwed Gland DN 15 to 100 -29°C to 178°C

Type — Iron NPS ½ to 4 (-20°F to 353°F)
DN 15 to 300 to PN 50 -20°C to 250°C

Taper Plug Lubricated
NPS ½ to 12 to Class 300 (-5°F to 480°F)
PN 20 to 420
DN 15 to 300 -46°C to 375°C
Super-H Lubricated
NPS ½ to 36
Class 150 to 2500
(-51°F to 700°F)
API 2000 to 10 000
PN 20 to 420
TIPV — DN 15 to 600 -46°C to 375°C
Twin Isolation NPS ½ to 24
API 2000 to 10 000
(-51°F to 700°F)
DN 15 to 300 PN 16 -29°C to 204°C

T4E Lined
VALVES | PLUG
N O N - L U B R I C AT E D
Mach 1
All-purpose, non-lubricated Sleeveline plug valve designed to provide reliable service with consistent, lower torques
for cost-effective actuation.
• Dependable, tight shutoff and in-line seal adjustment from tapered plug design SPECIFICATIONS
• Reduced actuation costs from lower constant turning torques owing to unique Sizes: DN 25 to 200; NPS 1 to 8
plug and sleeve design Press: P N 10, 16, 25, 40 and 100;
• Lower maintenance costs with in-line seat replacement Class 150, 300 and 600
• High-temperature and high-pressure capabilities to 274°C (525°F) and Class Temp: -46°C to 274°C (-50°F to 525°F)
600 (derated)
• Ease of operation enabled by ISO 5211 mounting pad with universal flange and Refer to literature DVATB0030
Durco double-D plug stem that accepts most standard actuation at flowserve.com/library.
G4
Reliable, versatile Sleeveline plug valve designed for the most corrosive and difficult chemical services where
drop-tight shutoff is an absolute requirement.
• Dependable, tight shutoff and in-line seal adjustment from tapered plug design SPECIFICATIONS
• Lower maintenance costs due to design that utilizes two adjuster fasteners that Sizes: DN 15 to 450; NPS ½ to 20
permit in-line seal adjustments under pressure within seconds Press: PN 10, 16, 25 and 40;
• Low fugitive emissions through fluoropolymer reverse-lip diaphragm that provides Class 150 and 300
a pressure-activated, self-energizing dynamic and static stem seal Temp: -46°C to 288°C (50°F to 550°F)
• Compatibility with a range of Automax actuators and other instrumentation
Refer to literature DVENBR0024
Durco • Options for lethal, toxic and sub-zero fluid services plus process control and high
flow requirements at flowserve.com/library.
G4Z-HF
Reliable, HF alkylation plug value preferred at refineries throughout the world when drop-tight shutoff is an
absolute requirement.
• Corrosion-resistant Monel M35-1 and API 607 fire-sealed construction ideal for SPECIFICATIONS
refinery applications that include HF and H2SO4 alkylation Sizes: DN 15 to 450; NPS ½ to 20
• Dependable, tight shutoff and in-line seal adjustment from tapered plug design Press: PN 10, 16, 25 and 40;
• Low fugitive emissions through fluoropolymer reverse-lip diaphragm that provides Class 150 and 300
a pressure-activated, self-energizing dynamic and static stem seal Temp: -46°C to 288°C (-50°F to 550°F)
• Ease of operation enabled by compatibility with a wide range of Automax
actuators and other instrumentation Refer to literature DVENTB0025
Durco at flowserve.com/library.
flowserve.com 77
PLUG
L U B R I C AT E D
Multiport Series – Steel and Iron

Dynamic Balance (steel), Super Nordstrom (steel) and Nordstrom Iron multiport plug valves are extremely efficient and
designed for applications that ordinarily require two to four straightway valves.
• Low inventory carrying costs and convenient operations as a result of the simplified SPECIFICATIONS
piping that eliminates the need for other fittings Sizes: NPS ½ to 12; DN 15 to 300
• Broad application use via the ports and stops that can be arranged to fit required Press: PN 20 to 420; Class 150 to 2500;
operating conditions 150 to 400 CWP (iron)
• Greater process control by eliminating waste, overpressure on equipment or incorrect Temp: to 450°C (232°F)
mixtures due to the convenient design
Refer to literature NVABR0014
Nordstrom • Efficient operation facilitated by the sealant grooves, which provide consistent
lubrication while protecting against corrosion at flowserve.com/library.
L U B R I C AT E D
Super Nordstrom – Steel

Well-tested, economical line of super-steel plug valves that provides dependable operations and eliminates the need for
field readjustments.
• Greater process control provided by the bubble-tight shutoff and predictable torque SPECIFICATIONS
• Increased uptime provided by the precisely controlled vertical lifting of the plug, which Sizes: NPS ½ to 4, DN 15 to 100
eliminates its wedging without affecting tight shutoff Press: Class 150 to 600
• Durable performance via the specially shaped weather seal that protects the stem, Temp: -29°C to 177°C (-20°F to 350°F)
gland and packing from hostile environments and corrosion
• Reliable operation enabled by the Sealdport™ sealant grooving system, designed to Refer to literature NVENBR1004
Nordstrom give complete distribution of pressurized sealant to seating surfaces
L U B R I C AT E D
Bolted Gland – Iron

Reliable bolted gland iron valve for applications in high-stress environments, such as gas, HVACI, wastewater, oil, steam
and more.
• Reduced downtime as a result of sealant channels that provide lubrication and protect SPECIFICATIONS
the seating surface against corrosion, erosion or accumulation of solids Sizes: NPS 6 to 36; DN 150 to 900
• Greater process control provided by leak-free, easy turning performance of the gland, Press: 120 to 500 CWP
which flexes Temp: -29°C to 177°C
• High-pressure performance made possible by the heavy-wall body, which can (-20°F to 350°F)
withstand higher-than-line sealant pressure and expected line stresses
Nordstrom • Reliable operation enabled by the Sealdport sealant grooving system, designed to give Refer to literature NVENBR1003
complete distribution of pressurized sealant to seating surfaces at flowserve.com/library.
VALVES | PLUG
L U B R I C AT E D
Bolted Gland – Steel

Reliable bolted gland steel valve for applications in high-stress environments, such as gas, HVACI, wastewater, oil,
steam and more.
• Reduced downtime provided by fixed-adjustment gland, which allows for quick SPECIFICATIONS
field adjustments if necessary Sizes: NPS 6 to 12; DN 150 to 300
• Personnel safety and ease of maintenance resulting from double ball checks, Press: Class 150
which maintain pressure in the enclosed grooving system and prevent back Temp: -29°C to 177°C (-20°F to 350°F)
pressure on the sealant chamber
• Greater process control provided by leak-free, flexible metal sealing diaphragm Refer to literature NVENBR1004
Nordstrom • Reliable operation enabled by the Sealdport sealant grooving system, designed to
give complete distribution of pressurized sealant to seating surfaces
L U B R I C AT E D
Dynamic Balance – Iron

Dependable and durable iron plug valve that eliminates the problems often associated with conventional plug valves.
• Increased uptime due to pressure-balanced plug, which ensures predictable SPECIFICATIONS

torque, even under high differential, vibration and thermal cycling Sizes: NPS 4 to 20; DN 100 to 500
• Greater process control enabled by the stainless steel spring, which preloads to Press: 150 to 200 CWP
prevent vibration and thermal cycling Temp: -29°C to 177°C (-20°F to 350°F)
• Reduced maintenance derived from the equal pressure above and below the plug
and port created by the balanced holes on both ends Refer to literature NVENBR1003
• Reliable operation enabled by the Sealdport sealant grooving system, designed to at flowserve.com/library.
Nordstrom give complete distribution of pressurized sealant to seating surfaces
L U B R I C AT E D
Dynamic Balance – Steel

Dependable and durable steel plug valve that eliminates the problems often associated with conventional plug valves.
• Increased uptime due to pressure-balanced plug, which ensures predictable SPECIFICATIONS

torque, even under high differential, vibration and thermal cycling Sizes: NPS 1 to 30; DN 25 to 750
• Reliable performance in hostile environments provided by the anti-friction coating Press: Class 150 to 2500
weather seal that provides superior corrosion resistance Temp: -46°C to 816°C
• Reduced downtime with pressure-energized stem seals (-50°F to 1500°F)
• Broadest range of sizes, pressure classes and materials
• Reliable operation enabled by the Sealdport sealant grooving system, designed to Refer to literature NVENBR1004
Nordstrom at flowserve.com/library.
give complete distribution of pressurized sealant to seating surfaces
flowserve.com 79
PLUG
L U B R I C AT E D
Super Nordstrom Two-Bolt Cover – Iron

Economical two-bolt cover iron valve designed to withstand the harsh gas industry environment and provide
corrosion protection.
• Cost-effective design that eliminates external leakage without the use of costly SPECIFICATIONS
accessories to protect exposed threaded stems Sizes: NPS ½ to 5; DN 15 to 125
• Ease of operations and maintenance through the use of valves that can be operated Press: 200 CWP
with standard 2-inch square wrench and adapter Temp: -29°C to 93°C (-20°F to 200°F)
• Increased uptime enabled by the thermally bonded, low-friction plug coating that
creates low operating torque Refer to literature NVENBR1003
• Greater process control through the sealant jacking that ensures positive operation and at flowserve.com/library.
Nordstrom drop-tight closure
L U B R I C AT E D
Super Nordstrom Two-Bolt Cover – Steel

Highly reliable, two-bolt cover steel valve providing all the well-known Nordstrom features for the gas industry in a design
that can be welded in-line.
• Ease of installation provided by weld ends that permit installation directly into welded SPECIFICATIONS
gas-distribution lines Sizes: NPS ¾ to 4; DN 20 to 100
• Improved resistance to fracture from ground movement provided by the increased Press: 13.7 bar (200 psi)
strength and ductility compared to flanged iron valves Temp: -29°C to 93°C (-20°F to 200°F)
• Highly reliable operation provided by the coated, tapered iron plug, which has
exceptionally low coefficient of friction and separates the metal plug and body Refer to literature NVENBR1004
• Longer service life due to the corrosion protection provided by the weather seal and
internal stops, which eliminate the trash pocket between the cover and stem
L U B R I C AT E D
DIPV – Double-Isolation
Reliable, double-isolation plug valve with two independent obturators in a single body; ideal for double block and
bleed applications.
• Improved plant and personnel safety assured by double-isolation design that allows SPECIFICATIONS
the operator to verify valve isolation before carrying out maintenance Sizes: DN 15 to 600; NPS ½ to 24
• A cost-, space- and weight-saving alternative to a double block and bleed system Press: PN 20 to 420; Class 150 to 2500;
using two valves in series API 2000 to 10 000
• Installation ease from compact design with the same face-to-face dimension as a Temp: -46°C to 375°C (-51°F to 700°F)
single valve, often replacing it without the need for pipe work modifications
• Greater process control via pressure-balanced design that provides true bubble-tight, Refer to literature SRENTB0001
Serck Audco double- isolation capability within a single valve body at flowserve.com/library.
VALVES | PLUG
L U B R I C AT E D
Double-Isolation – Steel
High-performance, double-isolation steel plug valve designed for critical shutoff applications where absolute shutoff is
required for safety, environmental or process reasons.
• Broad application versatility due to robust design, making valve well-suited for SPECIFICATIONS
isolation in compressor, pump, meter, water or gas injection system applications Sizes: DN 50 to 300; NPS 2 to 12
• Improved plant and personnel safety assured by double-isolation design Press: Class 150 to 2500
• Installation ease from compact design with the same face-to-face dimension as a Temp: -46°C to 232°C (-50°F to 450°F)
single valve
Refer to literature NVENBR1016
Nordstrom • Greater process control via proven Dynamic Balance pressure-balanced and
sealing technology to prevent unequal pressure above/below the plug at flowserve.com/library.
• Low lifecycle costs compared to two single valves
L U B R I C AT E D
Screwed Gland Type – Iron

Rugged, dependable, quarter-turn plug valve designed to require no adjustments in the field once the plug has been
carefully adjusted by valve assembler.
• Increased uptime via controlled plug motion design provided by the flexing of SPECIFICATIONS
spring washers Sizes: DN 15 to 100; NPS ½ to 4
• Greater process control enabled by tapered plug that is lapped individually with its Press: 200 to 800 CWP
matching body, providing perfect seating contact Temp: -29°C to 178°C (-20°F to 353°F)
• Longer service life assured by positive rotary action and sealant channels that
protect the seating surfaces Refer to literature NVENBR1003
• Positive operation and drop-tight closure ensured by sealant jacking and thermally
bonded, low-friction plug coating for low operating torque
L U B R I C AT E D
Taper Plug
Reliable, standard type taper plug valve designed for general isolation purposes in a variety of liquid, gaseous and
slurry services. Available in cast iron and steel to suit application.
• Greater process control via tapered plug design that offers leak tightness while SPECIFICATIONS
maintaining smooth valve operation Sizes: DN 15 to 300; NPS ½ to 12
• Longer service life through tapered seat surfaces of the plug and body that Press: to PN 50; to Class 300
prevent exposure to line fluid when valve is in the open position Temp: -20°C to 250°C (-5°F to 480°F)
• Increased reliability due to the straight flow path design that minimizes pressure
loss by allowing very little resistance to flow Refer to literature SRENTB0002
and SRENTB0003 at flowserve.com/
Serck Audco
library.
flowserve.com 81
PLUG
L U B R I C AT E D
Super-H
Rugged, pressure-balanced plug valve designed for demanding oil and gas isolation applications where bubble-tight
shutoff and reliable operation are critically important.
• High reliability and certainty of zero-leakage sealing down the line achieved by large, SPECIFICATIONS
metal-to-metal seat mating areas and precise seat mating procedures Sizes: DN 15 to 1050; NPS ½ to 42
• Increased uptime from pressure-balanced plug design that utilizes pressure to balance Press: PN 20 to 420; Class 150 to 2500;
the forces acting on the plug and prevent taper locking API 2000 to 10 000
• Lower maintenance costs via in-line maintainable design that allows sealant to be Temp: -46°C to 375°C
injected with the valve in any position and under pressure (-51°F to 700°F)
• Longer service life assured by seats that are protected against line media while the
Serck Audco valve is open Refer to literature SRENTB0004
L U B R I C AT E D
TIPV – Twin Isolation

Reliable, double-isolation plug valve with two independent obturators in a single body; ideal for double block and
bleed applications.
• Improved plant and personnel safety assured by double-isolation design that allows SPECIFICATIONS
the operator to verify valve isolation before carrying out maintenance Sizes: DN 15 to 600; NPS ½ to 24
• Cost-, space- and weight-saving alternative to double block and bleed system using Press: PN 20 to 420; Class 150 to 2500;
two valves in series; same face-to-face as a single valve in Class 600 and above API 2000 to 10 000
• Lower maintenance costs via in-line maintainable design that allows sealant to be Temp: -46°C to 375°C
Serck Audco injected with the valve in any position and under pressure (-51°F to 700°F)
• Greater process control via pressure-balanced design that provides true bubble-tight,
double-isolation capability within a single valve body Refer to literature SRENTB0005
Reduced Cost of Ownership

We get it. Reducing equipment total cost of ownership is critical to
improving your bottom line. Flowserve has helped more than 200
strategic alliance partners reduce their equipment ownership
costs through programs that address asset management and
optimization, engineering and technical services, education
and training, and aftermarket parts and services. In fact, one
customer with seven refineries is projected to save in excess
of $20 million over five years.
VALVES | PLUG
LINED
T4E
Durco T4E valves provide maximum corrosion resistance while eliminating product contamination at a reasonable
cost. Available with pneumatic or electric actuators for on-off or modulating control applications.
• Cost-effective alternative to high-alloy body materials SPECIFICATIONS

• Reliable performance in extreme service conditions such as severe cycling, Sizes: DN 15 to 300; NPS ½ to 12
vacuum applications, and elevated temperatures ensured by T-slots and anchor Press: PN 16; Class 150 to 300
holes that provide strong attachment of lining to body and plug Temp: -29°C to 204°C (-20°F to 400°F)
• Efficient, high-flow capacity due to large ports, which reduce friction losses and
pressure drop Refer to literature DVENBR0066
Durco • Easy maintenance with in-line adjustment; no disassembly is required to
restore seating
flowserve.com 83
ACTUATION & INSTRUMENTATION
ACTUATION & INSTRUMENTATION
While pumps, seals and valves seem to Electric Actuation. . . . . . . . . . . . . . . . . . 87
get most of the attention, it’s often the Gearboxes. . . . . . . . . . . . . . . . . . . . . . . 95
Fluid Power Actuation . . . . . . . . . . . . . . 99

actuators and positioning solutions that are
Positioners. . . . . . . . . . . . . . . . . . . . . . . 111
running the show. Fail-safe isolation. On-
Switch Boxes. . . . . . . . . . . . . . . . . . . . 119
off modulation. Precision process control.
Software . . . . . . . . . . . . . . . . . . . . . . . 123
These are the must-haves of fluid motion
and control, no matter how difficult or
remote the application.
Our actuator and positioning products are

equal parts durability and sophistication,
an ideal balance that delivers reliable valve
control in tough, hazardous environments.
From small-footprint, compact electric
actuators to high-torque, high-speed, fluid-
powered products, every solution is built
to withstand its environment and deliver
industry-leading service life. Embedded
technologies make them easy to use and
set up. More importantly, operators can
readily identify and expedite solutions to
process and equipment issues through
advanced prognostics, diagnostics and
communications protocols.
flowserve.com 85
MX
ACTUATION & INSTRUMENTATION | ELECTRIC
ELECTRIC
Delivering unmatched positioning accuracy for control and modulating functions, Flowserve
electric actuators are the world’s first choice for some of the most challenging applications.
Compact, lightweight designs keep footprints small. Cost-effective capital investment is
matched by reduced costs for operation, control functions, maintenance, environmental
compliance and safety. Superior process monitoring, data logging and information feedback
options maximize efficiency and minimize downtime.
Electric – Quick Reference*

Product Sub-Type Torque Thrust Output Speed Temperatures
Intrusive 136 to 81 600 Nm 4500 to 225 000 kN 750 to -50°C to 65°C

L120 Multi-Turn (100 to 60 000 ft-lb) (10 000 to 500 000 lbf) 3000 rpm (-56°F to 150°F)
Intrusive 20 to 81 349 Nm 36 to 2224 kN 1800 to -29°C to 66°C

SMB Multi-Turn (15 to 60 000 ft-lb) (8000 to 500 000 lbf) 3600 rpm (-20°F to 150°F)
Intrusive 353 to 11 253 Nm 62 to 1112 kN 1800 to -29°C to 66°C

SB and SBD Multi-Turn (260 to 8300 ft-lb) (14 000 to 250 000 lbf) 3600 rpm (-20°F to 150°F)
Non-Intrusive, 54 to 2033 Nm -55°C to 70°C

QX Quarter-Turn (40 to 1500 ft-lb)
— 5 to 120 s
(-67°F to 156°F)
Non-Intrusive, 24 to 337 Nm 3 to 40 kN 3 to -30°C to 70°C

QXM Multi-Turn (18 to 250 ft-lb) (593 to 9065 lbf) 24 rpm (-22°F to 156°F)
Non-Intrusive, 27 to 2307 Nm 35 to 333 kN 15 to -60°C to 70°C

MX Multi-Turn (20 to 1700 ft-lb) (8000 to 75 000 lbf) 200 rpm (-76°F to 158°F)
flowserve.com 87
Electric – Quick Reference, cont’d.
Product Sub-Type Topology Comm. Meth. Max. Tran. Max. Devc. Max. Dist.
Multi-drop (single
Network 1200 m
Modbus DDC Controls
ended/redundant Master-Slave 19.2 Kbps 250
(without repeaters)
loop for MX)
Redundant Modbus
Modbus Ethernet Network 1.52 km (without
bi-directional loop protocol over 38.4 Kbps 250
TCP/IP Controls
or daisy chain RS-485 or Ethernet
repeaters)
240/network —
Foundation Fieldbus Network Multi-drop, Point- Publisher/
31.25 Kbps 32/segment 1900 m/segment
H1 with DTM Controls to-Point, Tree Subscriber
(with repeater)
Multi-drop,
PROFIBUS DP V1 with Network 1200 m
Point to Point, Master-Slave 1.5 Mbps 127
Redundancy and DTM Controls
Daisy Chain
(without repeaters)
Network Multi-drop, 127 1200 m

PROFIBUS PA Controls Point-to-Point, Tree
Master-Slave 31.25 Kbps
(31 per repeater) (without repeaters)
Network Multi-drop, Linear

DeviceNet Controls Trunkline/Dropline
Master-Slave 500 Kbps 64 500 m
Hart Network Multi-drop,

Master-Slave 1.2 Kbps 15 1800 m/network
with DTM Controls Point-to-Point
All network PCBs meet EMC requirements to European Directive 2004/108/EC and vibration/seismic
requirements to Machinery Directive 2006/42/EC.
I N T R U S I V E M U LT I - T U R N
L120
From commercial power feedwater and steam systems, to oil and gas refining and coking, to water filtration and
treatment, the L120 has a solid record in the most demanding applications.
• Proven safety with explosion-proof certification, torque overload protection, plus SPECIFICATIONS
resistance to lightning, EMI, fire, vibration and high-pressure steam Torque: 136 to 81 600 Nm
• Longer service life from aluminum and ductile iron housings, plus anti-friction (100 to 60 000 ft-lb)
bearing-supported alloy steel worm shafts with bronze worm gears Thrust: 4500 to 225 000 kN
• Broad application flexibility via integration with most network protocols through (10 000 to 500 000 lbf)
UEX electronic controls package Output Speed: 750 to 3000 rpm
Limitorque • Extreme environment performance available from weatherproof, submersible and Temp: -50°C to 65°C (-56°F to 150°F)
explosion-proof construction options
Refer to literature LMENBR1200
SMB
Introduced in the 1960s, SMB actuators are used by the U.S. Navy, every nuclear power facility in the U.S., and
virtually every other industrial environment.
• Long service life with rugged with cast iron housing and precision-machined SPECIFICATIONS
gearing Torque: 20 to 81 349 Nm
• Extreme environment performance enabled by nuclear, weatherproof, submersible (15 to 60 000 ft-lb)
or explosion-proof construction Thrust: 36 to 2224 kN
• Lower maintenance and downtime owing to torque-limiting feature, which (8000 to 500 000 lbf)
Limitorque de-energizes the motor to prevent valve damage in the event of an obstruction Output Speed: 1800 to 3600 rpm
• Fully qualified for nuclear applications to IEEE 384, 323 and 344 Temp: -29°C to 66°C (-20°F to 150°F)
SB and SBD
These spring-compensated extensions of the SMB product line are available for applications where thermal expansion
may pose a jammed-valve risk, or where valve discs are subject to extremely high-speed closure.
• High-temperature capability enabled by design that allows for thermal expansion SPECIFICATIONS
and contraction of the valve stem and actuator stem nut Torque: 353 to 11 253 Nm
• High-speed performance made possible by spring-loaded stem nut, which (260 to 8300 ft-lb)
absorbs the seating shock caused by rapid closing Thrust: 62 to 1112 kN
• Longer service life via impact-dampening capability, which enables actuators to (14 000 to 250 000 lbf)
Limitorque function at speeds as high as three times normal rates Output Speed: 1800 to 3600 rpm
• Optimized performance for stem contraction and torque back-seating applications Temp: -29°C to 66°C (-20°F to 150°F)
available with double-compensating SBD configuration
flowserve.com 89
ELECTRIC
NON-INTRUSIVE, QUARTER-TURN
QX
The QX design builds on more than 20 years of proven MX technology to provide all the user-preferred features in a
quarter-turn smart actuator package.
• Greater process control with non-contacting absolute encoders that provide accurate SPECIFICATIONS
position sensing Torque: 54 to 2033 Nm (40 to
• B.I.S.T., built-in self-test which never needs batteries to retain position data, even in 1500 ft-lb)
the event of main power loss Output Speed: 5 to 120 s
• Extreme environment performance made possible by non-intrusive design, 100% Temp: -55°C to 70°C (-67°F to 156°F)
Limitorque solid-state controls, and reliable digital communication control system
• Flexible control configurations, setup and diagnostics in 11 languages, and advanced Refer to literature LMENBR3302
brushless DC motor that supports most global voltages, AC or DC at flowserve.com/library.
N O N - I N T R U S I V E , M U LT I - T U R N
QXM
A smart, non-intrusive electronic valve actuator with a maximum of 20 drive sleeve turns. Designed for limited, short
stroke, light torque rising stem valve applications such as choke or control valves.
• Lower operating costs compared to pneumatic actuators, with the added advantages SPECIFICATIONS
of electrical operation Torque: 24 to 337 Nm; (18 to 250 ft-lb)
• Greater process control from accuracy that meets and exceeds EN 15714 (Class D) Thrust: 3 to 40 kN; (593 to 9065 lbf)
and IEC 60034 standards for modulating service Output Speed: 3 to 24 rpm
• Increased reliability via electro-magnetic noise protection of analog process control Temp: -30°C to 70°C (-22°F to 156°F)
Limitorque signals
N O N - I N T R U S I V E , M U LT I - T U R N
MX
Introduced in 1997 and into its third generation, the MX is built upon a wealth of experience and performance in valve
actuation. Thousands are installed in all major market segments.
• Broad versatility owing to a wide variety of configurations, including torque-only, SPECIFICATIONS

thrust-based, linear thrust base and rising stem applications Torque: 27 to 2307 Nm (20 to
• Increased uptime from patented absolute positioning encoder that never needs 1700 ft-lb)
batteries and B.I.S.T. built-in self-test Thrust: 35 to 333 kN;
• Instant actuator status and valve position in 11 languages provided by graphical (8000 to 75 000 lbf)
display with local control switches with solid-state Hall effect devices Output Speed: 15 to 200 rpm
Limitorque • Low-temperature capability to -60°C (-76°F) with arctic temperature and solid-state Temp: -60°C to 70°C (-76°F to 158°F)
starter options for modulation to 1200 starts per hour
Leading the Charge in Electric Innovation
Flowserve was one of the first companies to introduce electric
actuators back in the 1980s. Since then, we’ve significantly
increased their efficiency while dramatically reducing their
cost. In recent years, these advances have reached a tipping
point that makes electric actuators the first choice for a wide
variety of applications. Today’s electric actuators can provide
superior positioning accuracy for control or modulating
functions, plus invaluable diagnostic and process data.
NETWORK CONTROLS
Modbus DDC
Limitorque ensures complete integration with Modbus DDC. Connect up to 250 actuators with a single twisted-pair
cable on an RS-485 network to a PLC/SCADA system or Limitorque Master Station.
®
• Greater process control in even the largest networks made possible by support for SPECIFICATIONS
up to 250 actuators Topology: Multi-drop (single ended/
• Increased efficiency, security and safety via Master Station option, enabling redundant loop for MX)
complete single-source control and diagnostics for MX, QX, L120 and LY units Comm. Meth: Master-Slave
• Complies with EMC requirements to European Directive 2004/108/EC and Max. Trans. Rate: 19.2 Kbps
vibration/seismic requirements to Machinery Directive 2006/42/EC Max. Devices: 250
Max. Dist: 1200 m (without repeaters)
Refer to literature LMENIM2329
and LMENFL5100 at flowserve.com/
library.
NETWORK CONTROLS
Modbus Ethernet TCP/IP

Combining the simplicity of the Modbus protocol with the widespread Ethernet standard, Limitorque products with
Modbus Ethernet TCP/IP connect to any Modbus network that supports TCP/IP and RS485 systems.
®
• Greater process control enabled by support for up to 250 devices SPECIFICATIONS

• Increased flexibility and reduced costs via off-the-shelf Ethernet tools, permitting Topology: Redundant bi-directional
control from a DCS, PLC or PC loop or daisy chain
• Easy installation with simple module that connects directly to Modbus terminals Comm. Meth: Modbus protocol over
• Optimized communication performance supported by baud rate options from 1.2K RS-485 or Ethernet
up to 38.4K Max. Trans. Rate: 38.4 Kbps
• Complies with ODVA CIP specifications for internet protocols, Industrial Ethernet Max. Devices: 250
(IE) regulations IEC 61158 (Fieldbus) and IEEE 802 Max. Dist: 1.52 km (without repeaters)
Refer to literature LLMENIM2329 at
flowserve.com 91
ELECTRIC
NETWORK CONTROLS
Foundation Fieldbus H1 with DTM

Limitorque actuators with Foundation Fieldbus can act as a link active scheduler and time master for regulating
communication on a fieldbus segment.
• Broad network versatility from support for multiple topologies, including point-to- SPECIFICATIONS
point, bus with spurs, daisy chain, tree or combinations of these Topology: Multi-drop, Tree,
• Ease of installation and setup with direct connection to PLC or DCS systems from Point-to-Point
major manufacturers, including Emerson, Honeywell, ABB, GE and Yokogawa Comm. Meth: Publisher/Subscriber
• Increased performance, safety and environmental compliance from Flowserve Max. Trans. Rate: 31.25 Kbps
ValveSightTM support Max. Devices: 240/network;
• Complies with EMC requirements to European Directive 2004/108/EC and 32/segment (with repeater)
vibration/seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 1900 m/segment
NETWORK CONTROLS
PROFIBUS DP V1 with Redundancy and DTM

Limitorque actuators with PROFIBUS DP are designed to operate sensors and actuators via a centralized controller in
production (factory) automation applications.
• Reduced maintenance and related operating costs via intuitive software that SPECIFICATIONS
proactively identifies maintenance needs, preventing unscheduled shutdowns Topology: Multi-drop, Point-to-Point,
• Increased efficiency enabled by network that allows users to communicate in real Daisy Chain
time with every device and monitor diagnostics information, including alarms Comm. Meth: Master-Slave
• Complies with EMC requirements to European Directive 2004/108/EC Max. Trans. Rate: 1.5 Mbps
• Complies with Profibus specification, Slave-Redundancy_2.212_v12 and transfers Max. Devices: 127
communication for both flying and system redundancy in ≤ 500 ms per specification Max. Dist: 1200 m (without repeaters)
• Supports NAMUR NE-107
and LMENFL2336 at flowserve.com/
library.
NETWORK CONTROLS
PROFIBUS PA
Limitorque actuators with PROFIBUS PA are used to monitor and control process automation applications.
• Broad application flexibility via analog and digital input/output function blocks SPECIFICATIONS
• Ease of installation and setup made possible by direct connection to PLC or DCS Topology: Multi-drop, Tree,
systems from major manufacturers, including Emerson, Honeywell, ABB and Yokogawa Point-to-Point
• Increased performance, safety and environmental compliance from Flowserve Comm. Meth: Master-Slave
ValveSight support Max. Trans. Rate: 31.25 Kbps
• Complies with EMC requirements to European Directive 2004/108/EC and vibration/ Max. Devices: 127 (31 per repeater)
seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 1200 m (without repeaters)
NETWORK CONTROLS
DeviceNet
Limitorque actuators integrate seamlessly with DeviceNet. DeviceNet is a digital, multi-drop network that connects and
serves as a communication network between industrial controllers and field devices.
• Broad application flexibility via support for multiple communication hierarchies and SPECIFICATIONS
message prioritization Topology: Multi-drop, Linear Trunkline/
• Greater reliability and reduced downtime assured by cyclic redundancy checking Dropline
(CRC), auto retries, and bus-powered network interface that allows alarm information Comm. Meth: Master-Slave
to be communicated when actuator loses main power Max. Trans. Rate: 500 Kbps
• Complies with EMC requirements to European Directive 2004/108/EC and vibration/ Max. Devices: 64
seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 500 m
NETWORK CONTROLS
Hart with DTM

Limitorque actuators with HART (Highway Addressable Remote Transducer) allow secondary masters, such as
handheld communicators, to be connected without interfering with the plant control system.
• Greater process control, asset management efficiency and safety made possible SPECIFICATIONS
by enabling the use of both centralized control/monitoring and smart field devices Topology: Multi-drop, Point-to-Point
• Faster diagnostic feedback and summaries due to burst mode that enables Comm. Meth: Master-Slave
response of up to three commands continuously Max. Trans. Rate: 1.2 Kbps
• Complies with EMC requirements to European Directive 2004/108/EC and Max. Devices: 15
vibration/seismic requirements to Machinery Directive 2006/42/EC Max. Dist: 1800 m/Network
Refer to literature LMENFL2340
or LMENIM2340 at flowserve.com/
library.
flowserve.com 93
V Series Bevel
ACTUATION & INSTRUMENTATION | GEARBOXES
GEARBOXES
Whether for manual or motorized operation, Flowserve quarter- and multi-turn gearboxes
stand up to the toughest performance requirements and environmental challenges. Trouble-
free operation, high uptime and rugged dependability are engineered into every unit
through high-strength gearing, robust housings and roller bearing-supported shafts. Broad
application versatility is achieved via weatherproof and submersible constructions and a
wide range of output speeds and torques.
Gearboxes – Quick Reference

Product Sub-Type Torque to Thrust to Temperatures
V 52 000 Nm 7650 kN -35°C to 90°C

Multi-Turn
Series Bevel (38 350 ft-lb) (1.7 million lbf) (-31°F to 194°F)
SR 23 000 Nm 3500 kN -35°C to 90°C

Multi-Turn
Series Spur (16 984 ft-lb) (787 000 lbf) (-31°F to 194°F)
WG 442 000 Nm -35°C to 90°C

Quarter-Turn —
Series Worm (326 000 ft-lb) (-31°F to 194°F)
HBC 126 204 Nm -29°C to 66°C

Quarter-Turn —
Series Worm (93 000 ft-lb) (-20°F to 150°F)
flowserve.com 95
GEARBOXES
M U LT I - T U R N
V Series Bevel
V Series bevel gearboxes are designed for manual and motorized operation for industrial gate and globe valves as well as
slide gates.
• Broad application versatility provided by excellent sealing of mating surfaces, which SPECIFICATIONS
allows for weatherproof or temporary submersion applications Torque to: 52 000 Nm (38 350 ft-lb)
• Increased uptime facilitated by roller bearing-supported shaft and high-strength bevel Thrust to: 7650 kN (1.7 million lbf)
gearing, which are rated for extremely high thrust and torque requirements Temp: -35°C to 90°C (-31°F to 194°F)
• Longer service life via ductile iron housing and roller bearing-supported shafts and
drive sleeve that provide durability Refer to literature LMENFL3602
Limitorque at flowserve.com/library.
M U LT I - T U R N
SR Series Spur
The SR Series is a solid-performing, multi-turn, spur gearbox designed for manual or motorized operation of gate and
globe valves as well as slide gates.
• Well suited for high vibration or tight space requirements owing to parallel input shaft SPECIFICATIONS
and output drive sleeve Torque to: 23 000 Nm (16 984 ft-lb)
• Application versatility provided by available weatherproof and submersible Thrust to: 3500 kN (787 000 lbf)
constructions as well as a wide range of output speeds and torques Temp: -35°C to 90°C (-31°F to 194°F)
• Increased uptime facilitated by roller bearing-supported shaft and high-strength
gearing, which are rated for extremely high thrust and torque requirements Refer to literature LMENIM3701
Limitorque at flowserve.com/library.
• High strength and durability provided by ductile iron housing and roller bearing-
supported shafts and drive sleeve
QUARTER-TURN
WG Series Worm
The WG Series of worm gearboxes offers unsurpassed quality and longevity in a wide variety of weatherproof, submersible
and buried-service applications.
• Extraordinary range of output speeds and torques made possible by compatibility with SPECIFICATIONS
a wide array of numerous electric actuators Torque to: 442 000 Nm (326 000 ft-lb)
• Reduced downtime provided by the removable, top-entry, splined valve shaft adapter, Temp: -35°C to 90°C (-31°F to 194°F)
which ensures proper engagement of the valve stem
• Increased uptime due to rugged ductile iron housing, roller bearing-supported shaft Refer to literature LMENFL2102
and well-designed sealing, which stands up to tough conditions at flowserve.com/library.
Limitorque
ACTUATION & INSTRUMENTATION | GEARBOXES
QUARTER-TURN
HBC Series Worm

The HBC is the strongest worm gearbox on the market. It delivers consistent, trouble-free performance in demanding
applications, ranging from nuclear power plants to critical service flow control in hydroelectric plants.
• Broad application versatility provided by ability to actuate a wide range of devices, SPECIFICATIONS
both manually or motorized, at a considerable range of output speeds and torques Torque to: 126 204 Nm (93 000 ft-lb)
• Increased uptime due to bronze worm gear paired with alloy steel worm shaft Temp: -29°C to 66°C (-20°F to 150°F)
• Lower maintenance costs due to heavy-duty construction; proven in use for more
than 50 years to be rugged and dependable Refer to literature LMENBR3500
• Ease of operation made possible by valve position pointer, which makes at-a- at flowserve.com/library.
Limitorque glance position checking easier than ever
Smart Solutions for the World’s

Toughest Applications
No matter how extreme the environment or strict the regulations,
customers the world over trust Flowserve actuation and positioning
products to provide reliable, intelligent control. Whether your devices
need to endure polar ice or desert heat, provide fail-safe protection
in explosive atmospheres or nuclear power stations, or control
complicated modulating processes with pinpoint accuracy,
Flowserve has an actuation solution that’s right for your application.
flowserve.com 97
40R
ACTUATION & INSTRUMENTATION | FLUID POWER
FLUID POWER
Whether you need fail-safe action, high-torque power or high-speed functionality, Flowserve
fluid power actuators are built for the world’s toughest jobs. Reliable operation, reduced
maintenance and longer service life are made possible by the simplicity, efficiency and
flexibility built into every design. From nuclear power plants to offshore drilling platforms,
the world’s most critical infrastructures rely on Flowserve for rugged, efficient actuators with
service lifespans of a quarter-century or more.
Fluid Power – Quick Reference*

Product Sub-Type Torque Thrust MAWP Temperatures
Pneumatic — 550 kNm 12 barg -60°C to 160°C

LPS Scotch Yoke (405 659 ft-lb)
—
(174 psig) (-76°F to 320°F)
Pneumatic — 5500 Nm 12 barg -60°C to 160°C

LPC Scotch Yoke (4057 ft-lb)
—
(174 psig) (-76°F to 320°F)
RG, ARG Pneumatic — 248 kNm 10.3 barg -55°C to 149°C

—
and WRG Scotch Yoke (2.2M in-lb) (150 psig) (-67°F to 300°F)
-30°C to 80°C
Pneumatic — 60 to 20 000 Nm 8 barg
Turnex™ Linkage (44 to 1475 ft-lb)
—
(116 psig)
(-22°F to 176°F); to -40°C
(-40°F) on request
Pneumatic — 7100 Nm 8.3 barg -40°C to 150°C

F39 Rack & Pinion (62 835 in-lb)
—
(120 psig) (-40°F to 302°F)

40R Rack & Pinion (62 835 in-lb)
—
(120 psig) (-40°F to 302°F)

33R Rack & Pinion (20 436 in-lb)
—
(80 psig) (-40°F to 302°F)
flowserve.com 99
Fluid Power – Quick Reference, cont’d.
Product Sub-Type Torque Thrust MAWP Temperatures

P61 Rack & Pinion (9408 in-lbs)
—
(120 psig) (-40°F to 302°F)
Pneumatic — 5005 Nm 8 barg -50°C to 150°C

Supernova™ Rack & Pinion (44 294 in-lb)
—
(120 psig) (-55°F to 302°F)

SXL Rack & Pinion (6770 in-lb)
—
(120 psig) (-55°F to 302°F)
Pneumatic — 5 to 1285 Nm 6 barg -60°C to 70°C

NR Rotary (43 to 11 381 in-lbs)
—
(80 psig) (-76°F to 158°F)
Pneumatic — 8 to 4160 Nm 10.3 barg -60°C to 177°C

VR Rotary (72 to 36 820 in-lbs)
—
(150 psig) (-76°F to 350°F)
Pneumatic — 0.25 to 60 kN 6 barg -40°C to 80°C

FlowAct™ Linear
—
(56.2 to 13 488.5 lbf) (87 psig) (-40°F to 176°F)
Pneumatic — 15.85 to 262.53 kN 10.3 barg -40°C to 177°C

VL Linear
—
(3564 to 59 020 lbf) (150 psig) (-40°F to 350°F)

VL-C Linear
—
(3564 to 30 150 lbf) (150 psig) (-40°F to 350°F)

VL-ES Linear
—
(16 350 to 37 420 lbf) (150 psig) (-40°F to 350°F)

VL-UHC Linear
—
(3564 to 28 300 lbf) (150 psig) (-40°F to 176°F)
Series 2 Pneumatic — -40°C to 80°C

— to 35.0 kN (7868 lbf) 6 barg (87 psig)
Type KP Linear (-40°F to 176°F)
Series 4 Pneumatic — 1.4 to 4.2 barg -30°C to 80°C

— to 25.5 kN (5735 lbf)
Type KA Linear (20 to 60 psig) (-22°F to 176°F)
550 kNm 345 barg -60°C to 160°C

LHS and LHH Hydraulic
(405 659 ft-lb) (5000 psig) (-76°F to 320°F)
550 kNm 105 barg -40°C to 160°C

LDG Direct Gas
(405 659 ft-lb) (1500 psig) (-40°F to 320°F)

P N E U M AT I C — S C O T C H Y O K E
LPS
Ideal for medium or large valve actuation and any application requiring robust design, long service life and high-speed
operation. Meets the most stringent safety and performance standards for oil and gas applications.
• Low total cost of ownership provided by 25-year design life and maintenance SPECIFICATIONS
intervals up to six years Torque: 550 kNm (405 659 ft-lb)
• High-speed performance with reduced size, weight and consumption made MAWP: 12 barg (174 psig)
possible by highly efficient design Temp: -60°C to 160°C (-76°F to 320°F)
• Modular construction allows easy on site maintenance without special tools and
Limitorque For more information, refer to
without removal from the valve
• Regulatory compliance with the highest industry standards, including EN 15714 LFENBR0001 or LFENFL0001.
and IEC 61508 (SIL 3 capable) Refer to literature LFENBR0001
or LFENFL0001 at flowserve.com/
library.
LPC
Suitable for pneumatic on-off, light modulating and control applications of small or medium quarter-turn valves in
general and protective services. Also useable in safety services up to SIL 3 in accordance with IEC 61508.
• Low total cost of ownership provided by proven design with 25-year life cycle and SPECIFICATIONS
maintenance intervals up to five years (or per EN 15714 endurance testing) Torque: 5500 Nm (4057 ft-lb)
• Application versatility enabled by flexible field conversion from Fail Close CW to MAWP: 12 barg (174 psig)
Fail Open CCW and easy retrofitting via specially designed coupling interface Temp: -60°C to 160°C (-76°F to 320°F)
Limitorque • Superior reliability and durability above typical industry standards, thanks to
heavy-duty design and excellent corrosion resistance Refer to literature LFENBR0002
• Regulatory compliance with the toughest industry standards, including EN 15714 or LFENTB0002 at flowserve.com/
and ISO 9001 library.
RG, ARG and WRG

A ductile cast iron actuator series, ideal for general process and chemical applications where highly standardized
pneumatic actuators are required. It offers more than 250 torque profiles and significantly reduces transverse loads.
• Easier installation in tight spaces via pull-to-compress design and concentric SPECIFICATIONS
nested spring configuration plus easy on-site field reconfiguration Torque: 248 kNm (2.2M in-lb)
• Increased efficiency from canted yoke and support system, which delivers MAWP: 10.3 barg (150 psig)
approximately 20% higher break torque Temp: -55°C to 149°C (-67°F to 300°F)
• Greater process control via bidirectional travel stops that allow precise
adjustment of open and closed positions Refer to literature AXEBR1002
Automax at flowserve.com/library.
• Environmental protection assured by IP67M (temporary submersion) rating and
Accord
marine-grade epoxy surface treatment
Worcester
flowserve.com 101
FLUID POWER
P N E U M AT I C — L I N K A G E
Turnex
The Turnex is a heavy-duty actuator for high-performance modulating control. It is also used for on-off service.
• Maintenance-free operation enabled by robust linkage system with bushing, providing SPECIFICATIONS
optimum torque curve for quarter-turn valves and eliminating play Torque: 60 to 20 000 Nm
• Seamless integration with NAF control valve package provided by unique direct (44 to 1475 ft-lb)
mounting concept MAWP: 8 barg (116 psig)
• Installation ease enhanced by internal air passages, eliminating external pipes Temp: -30°C to 80°C (-22°F to 176°F);
• Minimizes spare parts with unique system of sleeves for different stem diameters, to -40°C (-40°F) on request
plus more than three decades of parts consistency
NAF Refer to literature Fk 74.59
P N E U M AT I C — R A C K & P I N I O N
LRP
The Limitorque LRP actuator is robust and reliable. It is designed for high-performance automation of quarter-turn valves
in a wide range of applications.
• Improved reliability, performance stability and service life enabled by unique piston SPECIFICATIONS
support rods that ensure side loads are transmitted through the bearings, not the body Torque: 1700 Nm (1250 ft-lb)
• Efficient torque matching ensured by the linear torque curve of the balanced double MAWP: 8 barg (116 psig)
rack and pinion design plus a large range of sizes Temp: -40°C to 150°C (-40°F to 302°F)
• Installation ease and application flexibility with ISO 5211 mounting with star drive
Limitorque output as well as Namur VDI/VDE 3845 top mounting and solenoid mounting patterns Refer to literature LFENBR0009
F39
High-cycle pneumatic power for on-off or throttling control of rotary valves and dampers. Available in double-acting or
spring-return configurations.
• Longer service life enabled by piston support rods that eliminate the need for the body SPECIFICATIONS
to be used as a bearing surface Torque: 7100 Nm (62 835 in-lb)
• Increased efficiency from balanced double rack-and-pinion, eliminating side loads MAWP: 8.3 barg (120 psig)
• Faster operation speed is a standard feature, thanks to unique design enabling Temp: -40°C to 150°C (-40°F to 302°F)
unrestricted air flow through guide rods
• Increased plant and personnel safety via long screws, allowing complete release of Refer to literature WCENBR1003
Worcester at flowserve.com/library.
spring energy during disassembly

40R
Recognized as the leading name in the quarter-turn pneumatic actuator market for half a century. With 11 sizes
available, torque output can be closely matched to the required valve torque.
• Longer service life enabled by piston support rods that eliminate the need for the body SPECIFICATIONS
to be used as a bearing surface Torque: 7100 Nm (62 835 in-lb)
• Increased safety plus ease of maintenance from anti-blowout pinion, airflow through MAWP: 8.3 barg (120 psig)
support rods, and long end cap screws to release spring energy Temp: -40°C to 150°C
• Application flexibility made possible by large size range and Namur VDE/VDI 3845 top- (-40°F to 302°F)
Norbro mounting pattern for easy fitting and interchangeability of ancillary equipment
• Minimizes space requirements with compact fail-safe option, available in same body Refer to literature NBEBR0003
size as double-acting configuration at flowserve.com/library.
33R
A 180-degree actuator derived from the world-renowned Norbro 40R, designed to compliment the Worcester Series
18/19 multi-way ball valve.
• Longer service life enabled by piston support rods that eliminate the need for the SPECIFICATIONS
body to be used as a bearing surface Torque: 2309 Nm (20 436 in-lb)
• Increased safety plus ease of maintenance from anti-blowout pinion, airflow MAWP: 5.5 barg (80 psig)
through support rods, and long end cap screws to release spring energy Temp: -40°C to 150°C (-40°F to 302°F)
• Application flexibility made possible by large size range and Namur VDE/VDI 3845
Norbro top-mounting pattern for easy fitting and interchangeability of ancillary equipment Refer to literature NBEBR0002
• Easy installation in tight spaces via spring-return version, available in same body or NBEBR0003 at flowserve.com/
size as double-acting configuration, creating a compact fail-safe option library.
P61
The P61 brings new levels of control to batch filling operations. Based on the 40R, it is designed specifically to provide
rapid, repeatable and highly accurate filling control for weigh/measuring processes.
• Greater process control assured by two-stage operation which allows high flow SPECIFICATIONS
followed by repeatable trickle flow before closing Torque: 1063 Nm (9408 in-lb)
• Longer service life enabled by piston support rods that eliminate the need for the MAWP: 8.3 barg (120 psig)
body to be used as a bearing surface Temp: -40°C to 150°C (-40°F to 302°F)
Norbro • Increased safety from bolted-on cover sleeve, anti-blowout pinion, airflow through
support rods, and long end cap screws to release spring energy Refer to literature NBEBR0004
or NBEBR0003 at flowserve.com/
library.
flowserve.com 103
FLUID POWER
Supernova
Supernova ASAP series rack and pinion actuators are designed for butterfly, plug or ball valves, and offer one compact
design for double acting and spring return.
• Increased efficiency and cycle life from precision die-cast pistons with large SPECIFICATIONS
cylinder bearings Torque: 5005 Nm (44 294 in-lb)
• Greater precision and reliability assured by integral travel stops in both directions, MAWP: 8 barg (120 psig)
plus 10 degrees of overtravel for precise adjustment Temp: -50°C to 150°C (-55°F to 302°F)
• Longer, trouble-free service life enabled by precision-extruded hard anodized
Accord Refer to literature ACENBR0004
aluminum body and a one-piece, factory-lubricated, nitride-protected pinion gear
• Ease and flexibility of installation via dual ISO 5211 mounting pattern or ACENBR0001 at flowserve.com/
library.
SXL
Ideal for corrosive environments, the SXL Series utilizes a 316 stainless steel body with stainless steel or aluminum pistons
and springs. Optional polished finishes for sanitary applications also available.
• Longer service life and lower maintenance cost from corrosion-resistant materials SPECIFICATIONS
• Greater process control enabled by bi-directional travel stops, with 5° overtravel and Torque: 765 Nm (6770 in-lb)
10° undertravel adjustment in each direction MAWP: 8.3 barg (120 psig)
• Installation ease via ISO 5211 mounting with Namur VDE/VDI 3845 top-mounting Temp: -50°C to 150°C (-55°F to 302°F)
pattern for easy fitting and interchangeability of ancillary equipment
Refer to literature LPR0006
Automax at flowserve.com/library.
P N E U M AT I C — R O TA RY
NR
The Flowserve Valtek NR diaphragm rotary actuator features excellent sensitivity that provides quick, accurate movements
for precise control.
• Long operating life enabled by rolling diaphragm that creates minimal wear SPECIFICATIONS
• Lower maintenance and parts cost assured by simple design Torque: 5 to 1285 Nm
• Increased efficiency from ISO 9001-compliant design, allowing direct mounting of (43 to 11 381 in-lb)
positioners for minimal lost motion MAWP: 6 barg (80 psig)
Temp: -60°C to 70°C (-76°F to 158°F)
Valtek Refer to literature VLENIM0064

P N E U M AT I C — R O TA RY
VR
The Flowserve Valtek VR cylinder actuator is a high-pressure, compact actuator with high torque and pneumatic stiffness
for excellent throttling capabilities.
• Greater process control enabled by standard splined shaft connection that SPECIFICATIONS
eliminates backlash Torque: 8 to 4160 Nm
• Lower maintenance costs, greater ease of installation, and compliance with (72 to 36 820 in-lbs)
seismic requirements assured by compact, lightweight and rugged design MAWP: 10.3 barg (150 psig)
• Long service life via low-friction bearings that provide millions of cycles with Temp: -60°C to 177°C (-76°F to 350°F)
Valtek minimal wear while minimizing hysteresis
• Increased plant and personnel safety made possible by air-purged, fully Refer to literature VLATB031
enclosed transfer case at flowserve.com/library.
P N E U M AT I C — L I N E A R
FlowAct
The FlowAct pneumatic diaphragm actuator is a high-thrust, multi-spring actuator for direct or reverse action — easy
installation and field reversible without additional parts.
• High-speed performance enabled by low volume between diaphragm and case SPECIFICATIONS
• Greater efficiency from fabric-reinforced, roll-type diaphragm that maintains Thrust: 0.25 to 60 kN (56.2 to
linear stem positioning 13 488.5 lbf)
• Lower maintenance cost made possible by maintenance-free stem bushing MAWP: 6 barg (87 psig)
Temp: -40°C to 80°C (-40°F to 176°F)
Valtek Refer to literature SAENTBFACT
VL
The VL Series is the standard set of actuators for Valtek control valves, providing precise control and reliable
performance for more than 30 years.
• Increased efficiency provided by substantially higher thrust capabilities compared SPECIFICATIONS

to diaphragm actuators, allowing tighter valve shutoff Thrust: 15.85 to 262.53 kN (3564
• Installation and maintenance ease made possible by exceptionally compact and to 59 020 lbf)
lightweight aluminum cylinder MAWP: 10.3 barg (150 psig)
• Ease of maintenance further enabled by durable construction and cylinder design, Temp: -40°C to 177°C (-40°F to 350°F)
Valtek which provides easy access to all internal components
• Lower installation and replacement costs with standard O-rings for static and Refer to literature VLENBR0002
dynamic seals at flowserve.com/library.
flowserve.com 105
FLUID POWER
VL-C
Offering identical springs and all the advantages of Flowserve standard aluminum actuators, the VL-C replaces all
aluminum parts with carbon steel.
• High performance enabled by replacing all aluminum parts with carbon steel SPECIFICATIONS
• Lower maintenance costs and time from simple design Thrust: 15.85 to 134.11 kN (3564
• Broad nuclear application flexibility provided by a variety of options and to 30 150 lbf)
accessories, allowing the VL cylinder to fit into almost any application requiring MAWP: 10.3 barg (150 psig)
high thrust and low maintenance Temp: -40°C to 177°C (-40°F to 350°F)
Valtek • Low inventory carrying costs enabled by lower-cost VL soft goods that are easier
to find Refer to literature VLENBR0002
VL-ES
Using many of the same design concepts as the VL-C, the VL-ES offers external spring cans for applications where longer
strokes or unusually high spring thrust are required.
• Longer service life — up to 2 million cycles — from dynamic quad seal design, SPECIFICATIONS
stronger springs, plug stem jam nut, and thrust bearings that prevent windup Thrust: 72.73 to 166.45 kN (16 350
• Installation and maintenance ease made possible by exceptionally compact and to 37 420 lbf)
lightweight aluminum cylinder MAWP: 10.3 barg (150 psig)
• Ease of maintenance via spring cylinder actuator design requiring the removal of just Temp: -40°C to 177°C (-40°F to 350°F)
two parts to access all internal components
Valtek • Lower installation and replacement costs thanks to standard O-rings for static and Refer to literature VLENBR0002
dynamic seals at flowserve.com/library.
VL-UHC
For applications where ultra high cycle (UHC) life is needed, VL-UHC Series actuators offer up to 2 million full stroke cycles
with periodic soft goods replacement.
• Significantly longer service life provided by dynamic quad seals, plug stem jam nut, SPECIFICATIONS
recessed O-ring adjusting screw seal, and stronger springs with stress-reducing Thrust: 15.85 to 125.88 kN (3564
thrust bearings to 28 300 lbf)
• Lower maintenance costs and time from simple design that requires removal of just MAWP: 10.3 barg (150 psig)
two parts to access all internal components Temp: -40°C to 80°C (-40°F to 176°F)
Valtek • Broad nuclear application flexibility provided by a variety of options and accessories,
allowing the VL cylinder to fit into almost any application requiring high thrust and low Refer to literature VLENBR0002
maintenance at flowserve.com/library.

Series 2 Type KP
Stainless steel actuators for standard use. Multi-spring design, fail-open or fail-close position, and various accessories
such as handwheels or limit stops make the KP actuator a frequent choice among operators.
• Broad application versatility offered by a wide range of sizes, integrated options SPECIFICATIONS
and accessories Thrust: to 35.0 kN (7868 lbf)
• Increased durability from stainless steel material, which provides superior corrosion MAWP: 6 barg (87 psig)
resistance, even without a protective coating Temp: -40°C to 80°C
• Installation ease and flexibility enabled by compact variations with enclosed (-40°F to 176°F)
accessories
Refer to literature KMEEBR0021
Kämmer
Series 4 Type KA
Compared to other manufacturers’ diaphragm actuator designs, Series 4 offers much higher thrust, compact design
and lighter weight. Field-reversible design may require no additional parts.
• Lower maintenance costs made possible by rugged positioner and internal design SPECIFICATIONS
that protects all moving parts against damage and dirt T hrust: to 25.5 kN (5735 lbf)
• Increased plant and personnel safety enabled by multiple-spring design, MAWP: 1.4 to 4.2 barg (20 to 60 psig)
improving safety of fail-safe mode Temp: -30°C to 80°C (-22°F to 176°F)
• Broad application versatility enabled by a wide variety of top-mounted options,
including handwheels, proximity switches and electric switches Refer to literature KMEEBR003
Kämmer at flowserve.com/library.
HYDRAULIC
LHS and LHH

Suitable for on-off, modulating and control applications of quarter-turn valves in general and protective services.
Also useable in safety services up to SIL 3 in accordance with IEC 61508.
• Longer service life and lower maintenance provided by proven design with SPECIFICATIONS
25-year life cycle and maintenance intervals up to six years Torque: to 550 kNm (405 659 ft-lb)
• Broad application versatility enabled by true modular design for flexible and easy MAWP: 345 barg (5000 psig)
field conversion Temp: -60°C to 160°C (-76°F to 320°F)
• Regulatory compliance assured by reliable design that meets a wide range of
general service, protective service and safety application standards, including Refer to literature LFENBR0003
Limitorque and LFENFL0003 at flowserve.com/
ESD / HIPPS and SIL Level 3 in accordance with IEC 61508
• Extreme environment performance available with polar or offshore variants library.
flowserve.com 107
FLUID POWER
DIRECT GAS
LDG
A high-pressure pneumatic, piston-type, Scotch yoke actuator designed to operate on high-pressure pneumatic
supply fluids, including pipeline gases and nitrogen. Certified for SIL 3.
• Reduced equipment footprint due to compact dimensions and design SPECIFICATIONS

• Improved lifespan with 25-year design life and maintenance interval up to six Torque: to 550 kNm (405 659 ft-lb)
years, or as prescribed in EN 15714 for high-cycle applications MAWP: 105 barg (1500 psig)
• Simplified on-site maintenance for standard activities such as replacement of Temp: -40°C to 160°C (-40°F to 320°F)
Limitorque
Scotch yoke sliding block without removing the actuator from the valve
• Reduced environmental impact through Limitorque’s high-pressure rated MHPC Refer to literature LFENTB0005
control group that minimizes gas consumption and exhaust at flowserve.com/library.

109
flowserve.com
Logix 3200MD

ACTUATION & INSTRUMENTATION | POSITIONERS
POSITIONERS
Dramatic improvements in process uptime, reliability and yield are facilitated at lower costs
with the Flowserve portfolio of ultra-high precision positioners. Return-to-operation times are
significantly reduced by advanced prognostic and diagnostic solutions that not only identify
field problems, but expedite corrective actions. All models offer industry-leading embedded
measurement, data reduction and diagnostic functionality, while control system-independent
user interfaces facilitate performance configuration, operation and diagnosis with a single view.
Positioners – Quick Reference*

Product Sub-Type Air Capacity Air Consumption Repeatability Temperatures
20.4 Nm3/h @ 4 bar 0.5 Nm3/h @ 4 bar -40°C to 76°C

StarPac® 3 Digital
(12 SCFM @ 60 psi) (<0.3 SCFM @ 60 psi)
0.25%
(-40°F to 170°F)
21 Nm3/h @ 6 bar <0.018 Nm3/h @ 6 bar -40°C to 80°C

D3 Digital
(12.5 SCFM @ 87 psi) (0.01 SCFM @ 87 psi) — zero bleed
<0.5%
(-40°F to 176°F)

D20 Digital
(4.2 SCFM @ 87 psi) (0.071 SCFM @ 87 psi)
<0.2%
(-4°F to 185°F)

D30 Digital
(29 SCFM @ 87 psi) (0.3 SCFM @ 87 psi)
<0.5%
(-40°F to 176°F)

Apex 9000 Digital
(4.2 SCFM @ 87 psi) (0.071 SCFM @ 87 psi)
<0.2%
(-4°F to 185°F)
30.6 Nm3/h @ 4.1 bar 0.082 to 0.637 Nm3/h @ 4.1 bar -52°C to 85°C
Logix 3800 Digital
(18 SCFM @ 60 psi) (0.048 to 0.375 SCFM @ 60 psi)
≤0.25%
(-61.6°F to 185°F)
20.8 to 30.6 Nm3/h @ 4.1 bar 0.082 to 0.637 Nm3/h @ 4.1 bar -52°C to 85°C
Logix MD+ Digital
(12.2 to 18 SCFM @ 60 psi) (0.048 to 0.375 SCFM @ 60 psi)
≤0.25%
(-61.6°F to 185°F)
flowserve.com 111
Positioners – Quick Reference, cont’d.
Product Sub-Type Air Capacity Air Consumption Repeatability Temperatures
20.8 Nm3/h @ 4.1 bar 0.082 Nm3/h @ 4.1 bar -52°C to 85°C
Logix 420 Digital
(12.2 SCFM @ 60 psi) (0.048 SCFM @ 60 psi)
≤0.25%
(-61.6°F to 185°F)

Logix 3200MD Digital
(12 SCFM @ 60 psi) (<0.3 SCFM @ 60 psi)
<0.05%
(-40°F to 176°F)

Logix 3400MD Digital
(12 SCFM @ 60 psi) (<0.3 SCFM @ 60 psi)
<0.05%
(-40°F to 176°F)
25.3 to 32.4 Nm3/h @ 6 bar 0.59 to 1.32 Nm3/h @ 6 bar -40°C to 85°C
P5 and EP5 Analog
(14.8 to 18.8 SCFM @ 87 psi) (0.35 to 0.78 SCFM @ 87 psi)
≤0.5%
(-40°F to 185°F)
23.7 to 44.4 Nm3/h @ 6 bar 0.53 Nm3/h @ 6 bar -20°C to 85°C

Apex 4000 Analog
(13.9 to 26.1 SCFM @ 87 psi) (0.31 SCFM @ 87 psi)
0.5%
(-4°F to 185°F)
25.3 to 32.4 Nm3/h @ 6 bar 0.59 to 1.32 Nm3/h @ 6 bar -40°C to 85°C
Apex 7000 Analog
(14.8 to 18.8 SCFM @ 87 psi) (0.35 to 0.78 SCFM @ 87 psi)
≤0.5%
(-40°F to 185°F)

VALVES | LINEAR
ACTUATION
D I G I TA L
StarPac 3
& INSTRUMENTATION
The StarPac 3 digital positioner offers repeatability, accuracy and quick system response time with a small footprint
and simple installation.
• Greater process control with built-in diagnostics compared to traditional control SPECIFICATIONS
CONTROL
loop technology Air Cap: 20.4 Nm3/h @ 4 bar
• Significantly higher response time via built-in process sensors with a sample rate (12 SCFM @ 60 psi)
of 16 times per second and typical loop time of 3 milliseconds Air Con: 0.5 Nm3/h @ 4 bar
• Greater accuracy from control valve with digital positioner, including valve position (<0.3 SCFM @ 60 psi)
sensor and actuator pressure sensors Repeatability: 0.25%
Valtek • Lower installation and operating costs enabled by compact design that eliminates Temp: -40°C to 76°C (-40°F to 170°F)
Kammer separate line taps and long runs of straight piping
D I G I TA L
| POSITIONERS
D3
The D3 is suitable for linear or rotary valves, single- or double-acting actuators, and special applications. Available with
general purpose, intrinsically safe and explosion-proof housings, with plug-in modules for limit switches and feedback.
• Lower operational cost made possible by zero-bleed pneumatic relay that enables SPECIFICATIONS
very low air consumption to minimize electricity costs and meet EPA bleed limits Air Cap: 21 Nm3/h @ 6 bar
for natural gas applications (12.5 SCFM @ 87 psi)
• Installation and configuration ease enabled by friction clutch, five simple keys and Air Con: <0.018 Nm3/h @ 6 bar (0.01
large graphic LCD display SCFM @ 87 psi) – zero bleed
PMV • Broad application versatility with Hart, PROFIBUS PA, PROFIBUS DP, Foundation Repeatability: <0.5%
Fieldbus and industry-leading IEC ISA100 wireless communication technology Temp: -40°C to 80°C (-40°F to 176°F)
• ATEX, IECEx, CSA, FM and SIL 2 approvals available with some configurations
Refer to literature PMENBR0001
or PMENBR0021 at flowserve.com/
library.
D I G I TA L
D20
This compact digital positioner suits both linear and rotary actuators in single-acting applications. Very high control
precision on even the smallest valves. IS, NI and explosion-proof versions.
• Greater process control with very high precision, even on the smallest valves, plus SPECIFICATIONS
add-in switches and 4-20 mA position feedback options Air Cap: 7.2 Nm3/h @ 6 bar
• Installation and operation ease from friction clutch, compact design, and single- (4.2 SCFM @ 87 psi
button quick auto-calibration feature that tunes the D20 in seconds Air Con: 0.12 Nm3/h @ 6 ba
• Broad application versatility made possible by flexible design that allows (0.071 SCFM @ 87 psi)
mounting to VDI/VDE 3845 (rotary) and VDI/VDE 3847 (linear with integrated Repeatability: <0.2%
PMV tubing) standards Temp: -40°C to 85°C (-4°F to 185°F)
• ATEX, IECEx, CSA and FM approvals available with some configurations
library.
flowserve.com 113
POSITIONERS
D I G I TA L
D30
The D30 is a robust, intelligent positioner with very high air capacity. Based on proven digital technology, it features a
large, high-performance spool valve controlled by a unique intelligent control algorithm.
• High-volume performance enabled by robust, high-capacity design that eliminates the SPECIFICATIONS
need for boosters Air Cap: 45.6 Nm3/h @ 6 bar
• Installation and operation ease from quick calibration and friction clutch to simplify (29 SCFM @ 87 psi)
commissioning plus a preloaded spring to eliminate play in the feedback mechanism Air Con: 0.5 Nm3/h @ 6 bar
• Broad application versatility via modular design that suits almost any control valve — (0.3 SCFM @ 87 psi)
PMV small or large, rotary or linear; options also include remote mounting of positioner Repeatability: <0.5%
• Lower maintenance costs and downtime with ValveSight DTM predictive diagnostics Temp: -40°C to 80°C (-40°F to 176°F)
library.
D I G I TA L
Apex 9000
The Apex 9000 is a compact digital positioner designed specifically for VDI/VDE 3845 rotary actuators. It offers excellent
control at an affordable price.
• Installation and operation ease from friction clutch, compact design plus quick SPECIFICATIONS
calibration and commissioning Air Cap: 7.2 Nm3/h @ 6 bar
• Greater process control with add-in switches and 4-20 mA position feedback options (4.2 SCFM @ 87 psi)
• Increased plant and personnel safety with intrinsically safe, non-incendive, or Air Con: 0.12 Nm3/h @ 6 bar
explosion-proof FM, CSA, IECEx and ATEX options
Accord (0.071 SCFM @ 87 psi)
Repeatability: <0.2%
Temp: -40°C to 85°C (-4°F to 185°F)
Refer to literature ACENBR0007
D I G I TA L
Logix 3800
Latest generation Digital HART and Foundation Fieldbus positioners designed for superior performance and reliability.
The Logix 3800 Series can be easily configured using local buttons, handhelds or ValveSight software.
• SIL 3 capable, robust construction works in the harshest conditions for temperature, SPECIFICATIONS
vibration, dirt, moisture, etc. Air Cap: 30.6 Nm3/h @ 4.1 bar
• High performance and precision control are provided by sensitive non-contact (18 SCFM @ 60 psi)
feedback sensor coupled with poppet-style relay. Predictive algorithms continuously Air Con: 0.082 to 0.637 Nm3/h @ 4.1 bar
monitor the health of the valve and actuator. (0.048 to 0.375 SCFM @ 60 psi)
• Simple to use, one-button setup automatically configures the zero, span and gain of Repeatability: ≤0.25%
Valtek the positioner for most valves in less than 60 seconds. Temp: -52°C to 85°C (-61.6°F to 185°F)
Automax • Adaptable design is configurable to interface with valve, process and control system
Kammer needs using HART, Foundation Fieldbus, 4-20 or discrete I/O signals. Refer to literature LGENBR3100-00

D I G I TA L
Logix MD+
Digital HART positioners with state-of-the-art piezo technology for superior performance and reliability. The Logix MD+
Series can be easily configured using local buttons, HART handheld and ValveSight software.
• Greater process control enabled by fast CPU, precision components, inner loop SPECIFICATIONS
control and advanced control algorithms Air Cap: 20.8 to 30.6 Nm3/h @ 4.1
• Increased reliability via temperature and humidity sensors, which detect bar (12.2 to 18 SCFM @ 60 psi)
developing issues and prevent failures Air Con: 0.082 to 0.637 Nm3/h @ 4.1
• Greater durability from heavy-duty housing, providing tough protection from dust, bar (0.048 to 0.375 SCFM @ 60 psi)
liquids and impact in the most demanding environments Repeatability: ≤0.25%
Valtek • Hazardous area performance assured by intrinsically safe electronics that meet Temp: -52°C to 85°C (-61.6°F to 185°F)
Automax ATEX, IECEx and North America (cFMus)
Kammer Refer to literature LGENBR0109
D I G I TA L
Logix 420
The Logix 420 is a compact, cost-competitive solution for the single-acting, explosion-proof, intrinsically safe and
non-incendive markets. Supports HART 6 and 7 protocols.
• Installation and operation ease assured by one-button calibration, easy user SPECIFICATIONS
interface, LCD screen and ValveSight DTM software Air Cap: 20.8 Nm3/h @ 4.1 bar
• Greater accuracy and reliability made possible by precision components, inner (12.2 SCFM @ 60 psi)
loop control and advanced control algorithms Air Con: 0.082 Nm3/h @ 4.1 bar
• Comprehensive online diagnostics and intuitive health display (0.048 SCFM @ 60 psi)
Valtek • Explosion-proof compliance with Class I Division 1 and ATEX Ex d installations, Repeatability: ≤ 0.25%
Automax intrinsically safe design certified for Class I Division 1 and Ex ia applications, plus Temp: -52°C to 85°C (-61.6°F to 185°F)
Kammer non-incendive approvals
Refer to literature LGENBR0106
D I G I TA L
Logix 3200MD
A digital HART positioner with state-of-the-art piezo technology to provide superior performance and reliability. Easily
configured using local buttons, HART handheld or ValveSight software.
• Installation ease assured by automatic calibration and tuning SPECIFICATIONS

• Faster diagnostic feedback and summaries made possible by burst mode Air Cap: 20.4 Nm3/h @ 4 bar
• Greater process control with 4-20 mA position feedback card option (12 SCFM @ 60 psi)
Air Con: 0.5 Nm3/h @ 4 bar
(<0.3 SCFM @ 60 psi)
Valtek Repeatability: <0.05%
Automax Temp: -40°C to 80°C (-40°F to 176°F)
or LGENIM0059 at flowserve.com/
library.
flowserve.com 115
POSITIONERS
D I G I TA L
Logix 3400MD
A digital Foundation Fieldbus positioner with state-of-the-art piezo technology to provide superior performance and
reliability. ITK 6.1 certified.
• Installation ease assured by automatic calibration and tuning SPECIFICATIONS

• Faster diagnostic feedback and summaries made possible by burst mode Air Cap: 20.4 Nm3/h @ 4 bar
• Easily configured using local buttons, FF handheld or ValveSight software (12 SCFM @ 60 psi)
• Function blocks for AO, PID, DI, DO, input selector and output splitter Air Con: 0.5 Nm3/h @ 4 bar
(<0.3 SCFM @ 60 psi)
Repeatability: <0.05%
Valtek Temp: -40°C to 80°C (-40°F to 176°F)
Automax
or LGENBR3405 at flowserve.com/
library.
A Worldwide Network Keeps

Your Business in Motion
Flowserve actuators are known for their dependability and ruggedness.
But, when you need service, every member of the Flowserve team is
committed to minimizing your downtime. Quick Response Centers and
Blue Ribbon Service Centers are strategically located in the Americas,
China, India, Middle East, and Europe to make sure you receive
premium service and expertise whenever you need it — even with
very short lead times.
ANALOG
P5 and EP5
Fast and accurate general purpose positioners available in pneumatic (P5) or electropneumatic (EP5) configurations.
Choose from explosion-proof (EP5-EX), fail freeze (EP5-FS) and intrinsically safe (EP5-IS) options.
• Enhanced performance from high-gain, high-capacity spool valve assembly, providing SPECIFICATIONS
very quick and accurate actuator and valve response plus simple commissioning with Air Cap: 25.3 to 32.4 Nm3/h @ 6 bar
non-interactive, zero-span adjustment (14.8 to 18.8 SCFM @ 87 psi)
• Longer service life assured by robust, simple design, delivering maximum reliability in Air Con: 0.59 to 1.32 Nm3/h @ 6 bar
all environments (0.35 to 0.78 SCFM @ 87 psi)
• Versatility from compact, modular design, allowing for simple addition of I/P
PMV Repeatability: ≤0.5%
converters and F5 feedback unit; suitable for single- or double-acting applications Temp: -40°C to 85°C (-40°F to 185°F)
Refer to literature PMENBR00008 or
PMENBR0006 at flowserve.com/
library.

ANALOG
Apex 4000
A compact, lightweight and cost-efficient positioner, the Apex 4000 is suitable for all rotary or linear valves, single- and
double-acting.
• Corrosive environment capability assured by epoxy powder-coated aluminum SPECIFICATIONS

construction of all exposed parts, plus gold-plated spool valve Air Cap: 23.7 to 44.4 Nm3/h @ 6 bar
• Greater reliability from compact, rugged design with few moving parts (13.9 to 26.1 SCFM @ 87 psi)
• Broad application versatility provided by multiple cam options Air Con: 0.53 Nm3/h @ 6 bar
• Quick and simple calibration uses thumbwheels and requires only a flat-head (0.31 SCFM @ 87 psi)
Accord screwdriver; span adjustment performed internally with external zero adjustment Repeatability: 0.5%
Automax • Easy field upgradability to electro-pneumatic I/P options without removing cover Temp: -20°C to 85°C (-4°F to 185°F)
PMV Refer to literature AXAPS014
ANALOG
Apex 7000
The Apex 7000 Series provides accurate valve positioning with advanced features. Usable with 3–15 psi pneumatic
control signals, or optional current-to-pressure transducer for 4-20 mA signal input.
• Corrosive environment capability assured by epoxy powder-coated aluminum SPECIFICATIONS

construction of all exposed parts, plus gold-plated spool valve Air Cap: 25.3 to 32.4 Nm3/h @ 6 bar
• Greater reliability from compact, rugged design with few moving parts (14.8 to 18.8 SCFM @ 87 psi)
• Broad application versatility provided by multiple cam options Air Con: 0.59 to 1.32 Nm3/h @ 6 bar
• Installation ease with quick and simple non-interacting, zero-span adjustment (0.35 to 0.78 SCFM @ 87 psi)
Accord • Easy field upgradability to electro-pneumatic I/P options without removing cover Repeatability: ≤0.5%
Automax Temp: -40°C to 85°C (-40°F to 185°F)
PMV Refer to literature AXENPS0125
or AXENBR0006 at flowserve.com/
library.
flowserve.com 117
XCL/XML Series
Ultraswitch

ACTUATION & INSTRUMENTATION | SWITCH BOXES
SWITCH BOXES
Flowserve switch boxes have a proven track record for accurate and reliable position
signaling in linear and rotary applications. Providing both visual and remote electrical
position indications, these cost-effective, compact units offer unparalleled performance
with ease of installation and calibration. Rugged, corrosion-resistant enclosures have
multiple switch options and meet IP66/67 and NEMA Type 4X standards. Intrinsically safe,
non-incendive and explosion-proof designs ensure safe, reliable operation in hazardous
environments.
Switch Boxes – Quick Reference

Product Sub-Type No. of Switches Temperatures
WS/WM -40°C to 80°C

Switch Boxes 0 to 2
Series Ultraswitch® (-40°F to 180°F)
PS/PM -40°C to 80°C

Switch Boxes 2 or 4
Series Ultraswitch (-40°F to 180°F)
DS/DM -55°C to 85°C

Switch Boxes 0 to 4
XCL/XML -40°C to 85°C

Switch Boxes 0 to 4
-40°C to 85°C
F5 Series Switch Boxes 2
(-40°F to 185°F)
-20°C to 80°C
Aviator II Ultraswitch Switch Boxes 0 to 4
(-4°F to 80°F)
flowserve.com 119
SWITCH BOXES
SWITCH BOXES
WS/WM Series Ultraswitch

Intrinsically safe and non-incendive compact switch box for chemical, petrochemical, food and beverage, municipal,
wastewater and pharmaceutical applications. Meets requirements for ATEX and cCSAus hazardous locations.
• Easy installation ensured by compact housing with multiple mounting possibilities and SPECIFICATIONS
up to four conduit entries with pre-wired switches No. of Switches: 0 to 2
• Configuration flexibility due to range of domed and flat indicators plus low profile units Temp: -40°C to 80°C (-40°F to 180°F)
without indicators
• Ingress protection ensured by design that meets IP66/67 and NEMA Type 4X standards Refer to literature AXENBR0135
• Choice of aluminum or corrosion-resistant resin enclosures at flowserve.com/library.
Automax
PMV
SWITCH BOXES
PS/PM Series Ultraswitch

Intrinsically safe and non-incendive, the PS/PM features a lightweight, modular design with corrosion-resistant engineered
resin enclosure. It is ideal for chemical, petrochemical, municipal, wastewater and pharmaceutical applications.
• Large range of global IS, NI and mb certificates enables use in all major applications SPECIFICATIONS
worldwide No. of Switches: 2 or 4
• Application flexibility due to the ability to be easily and directly mounted onto Temp: -40°C to 80°C (-40°F to 180°F)
actuators for both rotary and linear applications with multiple switch options
• Optional continuous position feedback and bus communication Refer to literature PMENBR0018
• Ingress protection ensured by design that meets IP66/67 and NEMA Type 4X standards at flowserve.com/library.
Automax
PMV
SWITCH BOXES
DS/DM Series Ultraswitch

The DS/DM Ultraswitch provides reliable position signaling for the highest class Ex d IIC/Group A hazardous location areas.
Available with aluminum or stainless steel enclosure for chemical, oil and gas, pharmaceutical and offshore applications.
• Meets IP66 and NEMA Type 4X standards and is offered for general purpose, SPECIFICATIONS
weatherproof and IIC/Group A explosion-proof hazardous locations No. of Switches: 0 to 4
• Highly configurable, with numerous options for switches, housing materials and Temp: -55°C to 85°C (-67°F to 180°F)
terminals, among many others
• Easy installation owing to multiple mounting possibilities, up to three conduit entries Refer to literature PMENBR0020
and pre-wired switches at flowserve.com/library.
Automax
PMV

ACTUATION & INSTRUMENTATION | SWITCH BOXES
SWITCH BOXES
XCL/XML Series Ultraswitch

The XCL/XML position indicator is globally certified explosion-proof and flame-proof for oil and gas, chemical,
petrochemical, food and beverage, municipal, wastewater and pharmaceutical applications.
• Ease of use provided by UltraDome™ visual indicator, which provides a wide- SPECIFICATIONS
angle view of the valve position, and Quick-Set™ cams, which offer easy, tool- No. of Switches: 0 to 4
free adjustment of sensing position Temp: -40°C to 85°C (-40°F to 180°F)
• Long service life provided by durable die cast aluminum housing with dichromate
undercoat and electrostatic powder topcoat for corrosion resistance Refer to literature AXENBR0006
• CSA/ATEX-approved for hazardous locations at flowserve.com/library.
Automax • Application versatility owing to a watertight position indicator and multiple
PMV mounting options for any rack and pinion, Scotch yoke or other rotary actuator
SWITCH BOXES
F5 Series
Feedback system offering the ability to add switches (mechanical or proximity), a potentiometer or a 4-20 mA
transmitter to the P5/EP5 analog positioners. Intrinsically safe and explosion-proof enclosure versions available.
• Reliable operation provided by a compact and sturdy design with vibration SPECIFICATIONS
resistance No. of Switches: 2
• Optimal performance resulting from a cam and spindle that are not splined to Temp: -40°C to 85°C (-40°F to 185°F)
achieve 100 percent resolution, which can be critical when used on control valves
• Application versatility owning to a wide range of limit switches and modular Refer to literature PMENBR0005
standard or explosion-proof housings that need no special mounting pieces at flowserve.com/library.
PMV
SWITCH BOXES
Aviator II Ultraswitch
Integrated on-off valve controller with industry-leading capacity up to Cv 4.5. Meets the corrosive, hazardous and
non-hazardous location valve control and positioning needs of chemical, oil and gas, and other industries.
• Secure operation in hazardous environments ensured by an internal pilot solenoid SPECIFICATIONS

coil that contains and protects the coil No. of Switches: 0 to 4
• Longer service life due to internally vented, tapered tee spool valve that prevents Temp: -20°C to 80°C (-4°F to 80°F)
the ingress of corrosive atmospheres and permits bidirectional self-cleaning
• Lower total cost of ownership resulting from the internal pilot solenoid coil Refer to literature ACENPS0100
that also simplifies wiring, reduces installation time and eliminates expensive at flowserve.com/library.
Automax
explosion-proof conduit and fittings
PMV
flowserve.com 121
ValveSight DTMs for HART or
Fieldbus Communications

ACTUATION & INSTRUMENTATION | SOFTWARE
SOFTWARE
Make your operation more profitable and easier to manage with ValveSight software
solutions, intelligent digital tools backed by more than two centuries of Flowserve fluid
management expertise. Designed to be easy to use with minimal training, ValveSight
enhances the entire equipment lifecycle. From easy installation and commissioning to
superior operational control and maximum valve life, our software solutions help you get the
most from every device while minimizing costly delays and downtime.
Software – Quick Reference

Product Sub-Type Specifications
ValveSight for • System Requirements: Windows XP, Windows 7, Windows 8, Windows 10
Positioners and Software • Compatibility: HART, PROFIBUS, Foundation Fieldbus, FDT/DTM
Switch Boxes • Equipment: valves, actuators, positioners and control signals
ValveSight DTMs • System Requirements: Windows XP, Windows 7, Windows 8, Windows 10

for HART or Fieldbus Software • Compatibility: Foundation Fieldbus; HART 6 and 7; FDT 1.2 and 2.0
Communications • Equipment: valves, actuators, positioners
• System Requirements: Windows XP, Windows 7, Windows 8, Windows 10

ValveSight DTM Software • Compatibility: StarPac 3, FDT 2.0, Modbus
• Major Systems: positioners, control systems
flowserve.com 123
SOFTWARE
SOFTWARE
ValveSight for Positioners and Switch Boxes

A proactive diagnostic solution for on-off and control valves that can be seamlessly integrated into host control or plant
asset management systems, improving plant efficiency without sacrificing safety and reliability.
• Reduced downtime enabled by early detection of emerging health issues and wear of SPECIFICATIONS
valves, actuators and positioners, preventing costly unplanned shutdowns • System Requirements: Windows XP,
• Reduced maintenance costs from proactive identification of components needing Windows 7, Windows 8, Windows 10
replacement • Compatibility: HART, PROFIBUS,
• Increased safety and efficiency via continuous online monitoring, equipment health Foundation Fieldbus, FDT/DTM
tests, and prevention of on-off valves sticking in end positions • Equipment: valves, actuators,
PMV • Reduced startup costs from proven interoperability with numerous hosts and positioners and control signals
communication protocols; plus quick and easy local or remote commissioning
SOFTWARE
ValveSight DTMs for HART or Fieldbus Communications

ValveSight software is designed to help engineers and maintenance personnel responsible for managing HART or Fieldbus
positioners by simplifying setup, calibration, configuration and diagnostics.
• Decreased maintenance costs via predictive diagnostics able to identify and assess SPECIFICATIONS
the severity of developing problems in valves, actuators, positioners or control loop • System Requirements: Windows XP,
configurations while the process is online and operating Windows 7, Windows 8, Windows 10
• Reduced downtime made possible by real-time condition monitoring, including long- • Compatibility: Foundation Fieldbus;
term trends, event capture, signatures, logs, hysteresis, deadband, repeatability and HART 6 and 7; FDT 1.2 and 2.0
Logix linearity (HDRL) testing • Equipment: valves, actuators,
• Simple, accurate installation and operation enabled by integrated calibration and positioners
configuration tools and contextual help system
Refer to literature LGENSF0014
and VSENBR0004 at flowserve.com/
library.
SOFTWARE
ValveSight DTM
StarPac ValveSight DTM is the software used by the revolutionary StarPac, enabling rapid flow measurement and
intelligent control. Improves operations at a cost lower than conventional control systems.
• Greater process control from system that gives users a unique, integrated view at a SPECIFICATIONS
single point • System Requirements: Windows XP,
• Greater efficiency with automatic PID control for fast integral adjustments to liquid Windows 7, Windows 8, Windows 10
flow, P1, P2, delta pressure, temperature, gas flow or auxiliary 4-20 mA signals • Compatibility: StarPac 3, FDT 2.0,
• Configuration and operation ease enabled by FDT/DTM 2.0 user interface with Modbus
Valtek integrated help system • Major Systems: positioners, control
systems
Refer to literature FLENMN0066-02l

ACTUATION & INSTRUMENTATION | SOFTWARE
125
flowserve.com
INDEX
Numbers B
33R......................................................... 103 Big Max BX2001....................................... 34

40R......................................................... 103 Bolted Gland – Iron.................................. 78
1878 Piston Check................................... 70 Bolted Gland – Steel................................. 79
1878 Swing Check................................... 71 BTV........................................................... 35
1878 T-Pattern.......................................... 64
C
1878 Y-Pattern.......................................... 62
CavControl................................................ 52
A ChannelStream......................................... 53
AKH2........................................................ 26 CPT........................................................... 40
AKH2-300................................................. 26 Cryogenic Ball.......................................... 22
AKH2A...................................................... 27 Cryogenic Ball Valve................................ 25
AKH3........................................................ 27 CryoSeal................................................... 22
AKH5........................................................ 27
D
AKH6 Fully Lined Tank Drain.................... 29
D3........................................................... 113
AKH7-KP.................................................. 28
D20......................................................... 113
AKH8........................................................ 28
D30......................................................... 114
AMP3........................................................ 29
DeviceNet................................................. 93
Anchor/Darling Piston (Lift) Check........... 70
DiamondBack........................................... 53
Anchor/Darling Swing Check Valve.......... 71
DIPV – Double-Isolation............................ 80
Anchor/Darling Tilting Disk....................... 72
Double Block and Bleed.......................... 24
Anchor/Darling T-Pattern.......................... 64
Double Disk.............................................. 57
Anchor/Darling Y-Pattern.......................... 63
Double-Isolation – Steel............................ 81
Apex 4000.............................................. 117
DS/DM Series Ultraswitch...................... 120
Apex 7000.............................................. 117
Duball DL.............................................20, 41
Apex 9000.............................................. 114
Dynamic Balance – Iron........................... 79
Aviator II Ultraswitch............................... 121
Dynamic Balance – Steel......................... 79

E L
Edward Blow-off....................................... 62 L120......................................................... 89

Edward Bolted Bonnet.................. 62, 63, 69 LDG........................................................ 108
Edward Tilting Disk................................... 71 LHS and LHH......................................... 107
EK71......................................................... 21 Logix 420................................................ 115
Equiwedge............................................... 56 Logix 3200MD........................................ 115
Equiwedge MSIV/MFIV............................. 56 Logix 3400MD........................................ 116
Logix 3800.............................................. 114
F
Logix MD+.............................................. 115
F5 Series................................................. 121
LPC......................................................... 101
F39......................................................... 102
LPS......................................................... 101
FK75M...................................................... 20
LRP......................................................... 102
FK76M...................................................... 23
FK79......................................................... 20 M
Flanged Ball............................................. 21 Mach 1...................................................... 77

Flex Wedge.............................................. 56 Mark 100................................................... 45
Flite-Flow.............................................61, 69 Mark 200................................................... 45
Flite-Flow Main Steam Isolation................ 61 Mark Eight................................................ 46
FlowAct................................................... 105 Mark One.................................................. 44
Foundation Fieldbus H1 with DTM........... 92 Mark One Three-Way................................ 44
Mark One-X.............................................. 44
G
Mark Two.................................................. 46
G4............................................................. 77
MaxFlo 4................................................... 38
G4Z-HF..................................................... 77
McCANNASEAL....................................... 30
H MegaStream............................................. 51
Hart with DTM........................................... 93 Modbus DDC............................................ 91
HBC Series Worm..................................... 97 Modbus Ethernet TCP/IP.......................... 91
HK35......................................................... 23 Multiport Series – Steel and Iron.............. 78

MX............................................................ 90
flowserve.com 127
INDEX
N
NAF Check............................................... 72 Slab Gate.................................................. 57

NR........................................................... 104 Slimseal.................................................... 35
SMB.......................................................... 89
P
Split Wedge.............................................. 57
P5 and EP5............................................. 116
SR Series Spur......................................... 96
P61......................................................... 103
StarPac 3................................................ 113
ProCap Capping Valve............................. 22
Stealth....................................................... 51
PROFIBUS DP V1 with Redundancy
Subsea..................................................... 24
and DTM................................................... 92
Super-H.................................................... 82
PROFIBUS PA........................................... 92
Super Nordstrom – Steel.......................... 78
PS/PM Series Ultraswitch....................... 120
Super Nordstrom Two-Bolt Cover –
Q Iron........................................................... 80
QX............................................................. 90 Super Nordstrom Two-Bolt Cover –
QXM.......................................................... 90 Steel......................................................... 80
Supernova.............................................. 104
R
Survivor..................................................... 51
RG, ARG and WRG................................ 101
SXL......................................................... 104
Rising Stem Ball Valve (RSBV)................. 26
T
S
T4E........................................................... 83
SB and SBD.............................................. 89
Taper Plug................................................ 81
Screwed Gland Type – Iron...................... 81
Three-piece Ball....................................... 21
Series 2 Type KP.................................... 107
TIPV – Twin Isolation................................. 82
Series 4 Type KA.................................... 107
TMCBV..................................................... 40
Setball....................................................... 38
TMCBV C2, N2 and Z2............................. 52
Setball SF................................................. 39
Torex....................................................35, 39
ShearStream HP....................................... 38
Trunnball DL........................................25, 40
SideWinder............................................... 53
Turnex..................................................... 102
Sight Glass Series.................................... 29
TX3 ......................................................... 34

U
Univalve...............................................61, 69
Valdisk................................................ 34, 39
Valtek GS ................................................. 46
ValveSight DTM...................................... 124
ValveSight DTMs for HART or Fieldbus
Communications..................................... 124
ValveSight for Positioners and
Switch Boxes.......................................... 124
VB2........................................................... 24
VB3........................................................... 24
VL........................................................... 105
VL-C........................................................ 106
VL-ES...................................................... 106
VL-UHC.................................................. 106
V-Port........................................................ 28
VR........................................................... 105
V Series Bevel.......................................... 96
VT1........................................................... 30
VW1.......................................................... 23
WG Series Worm...................................... 96
WS/WM Series Ultraswitch..................... 120
XCL/XML Series Ultraswitch................... 121
Z-Trim....................................................... 52
flowserve.com 129
flowserve.com 131
Flowserve Corporation Flowserve Corporation has established industry leadership in the design and manufacture of its products.
When properly selected, this Flowserve product is designed to perform its intended function safely during
5215 North O’Connor Blvd. its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve
products might be used in numerous applications under a wide variety of industrial service conditions.
Suite 2300 Although Flowserve can provide general guidelines, it cannot provide specific data and warnings for all
possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper
Irving, Texas 75039-5421 USA sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user
should read and understand the Installation Instructions included with the product, and train its employees
Telephone: +1 937 890 5839 and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are
supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory
results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or
implied, regarding any matter with respect to this product. Because Flowserve is continually improving and
upgrading its product design, the specifications, dimensions and information contained herein are subject to
change without notice. Should any question arise concerning these provisions, the purchaser/user should
contact Flowserve Corporation at any one of its worldwide operations or offices.
©2018 Flowserve Corporation. All rights reserved. This document contains registered and unregistered
trademarks of Flowserve Corporation. Other company, product, or service names may be trademarks or service
FLS-1002a (E/A4) February 2018 marks of their respective companies.

flowserve.com

Instrumentation and Valves PDF

Uploaded by

Copyright:

Available Formats

Instrumentation and Valves PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Instrumentation and Valves PDF

Uploaded by

Copyright:

Available Formats

VALVE, ACTUATION AND

Valves Introduction. . . . . . . . . . . . . . . . . . . . 15 Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . 51

Rotary Control Valves Check Valves

Fluid Power Actuation

Our industry-leading portfolio of pumps, seals, valves and actuation

Flowserve has an unrivaled combination of

Flowserve offers the world’s most

Technology and Insights Local Support Worldwide

World-class valve performance is assured by a full portfolio of quarter-turn, rotary,

Flowserve also offers precision actuation and instrumentation for every

Every intelligent flow control solution is designed to deliver industry-leading

Even as we meet today’s challenges, we’re looking ahead to tomorrow’s

Flowserve can trace its expertise in flow control back Accord™

OIL AND GAS

SERVICES THAT DRIVE SAFETY, RELIABILITY AND PERFORMANCE

PARTS, REPAIRS, UPGRADES AND FIELD SERVICES

• Repair and Upgrades — From machining to mechanical upgrades to

• Replacement Parts and Components — Using its broad network of

• Field Services — From maintenance to management, highly qualified

• Technical Assessments — Flowserve can perform system audits to

• Reliability Services — Flowserve offers standard solutions to improve

• Engineering Support — Flowserve engineers can engage remotely

ASSET MANAGEMENT AND OPTIMIZATION

EDUCATION AND TRAINING

aggressive, you’ll find Flowserve valves Butterfly. . . . . . . . . . . . . . . . . . . . . . . . . 33

configurations they require, engineered Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

to meet requisite performance and safety

It’s a portfolio of brands for quarter-

Ball – Quick Reference*

DN 65 to 200 PN 16 to 40 -48°C to 230°C

DN 15 to 50 PN 16 to 250 -105°C to 650°C

DN 25 to 400 PN 10 to 40 -30°C to 250°C

DN 25 to 400 PN 10 to 40 -30°C to 250°C

DN 8 to 150 PN 100 -46°C to 230°C

DN 15 to 250 PN 20 to 50 -46°C to 315°C

DN 8 to 150 PN 100 -196°C to 82°C

* Additional products shown on next two pages

DN 15 to 200 PN 20 to 110 -196°C to 200°C

ProCap DN 500 to 750 PN 16 -30°C to 250°C

DN 25 to DN 50 PN 16 to 160 -105°C to 650°C

DN 50 to 500 PN 150 to 260 -105°C to 650°C

DN 50 to 1600 PN 20 to 420 -46°C to 220°C

Double DN 50 to 1200 PN 20 to 420 -196°C to 400°C

Cryogenic DN 25 to 1400 PN 20 to 420 -196°C to 200°C

DN 150 to 900 PN 10 to 40 -30°C to 250°C

Rising Stem Ball DN 25 to 600 PN 10 to 320 -196°C to 600°C

DN 15 to 350 PN 16 -10°C to 200°C

DN 25 to 150 PN 50 -10°C to 200°C

DN 25 to 150 PN 16 -10°C to 350°C

DN 25 to DN 50 For glass -10°C to 200°C

DN 15 to 150 PN 16 -10°C to 200°C

DN 25 to 150 Varies, depending Varies, depending

DN 25 to 150 PN 16 -10°C to 200°C

DN 25 to 150 PN 16 -10°C to 200°C

AKH6 Fully Lined DN 25x50 to 150x200 PN 16 -10°C to 200°C

DN 15 to 450 PN 20 to 260 -196°C to 815°C

• Environmental and regulatory compliance made possible by design engineered to SPECIFICATIONS

ProCap Capping Valve

• Reduced fugitive emissions made possible by welded-body construction, which SPECIFICATIONS