0% found this document useful (0 votes)
96 views4 pages

Using Tetra

Maury Precision Flanges (MPF) provide precise mating of waveguide flanges, improving connection consistency and repeatability over standard flanges. MPF flanges are used on Maury calibration kits and low VSWR components. They mate with various standard flange types depending on the band. MPF flanges have precision index holes and optional alignment pins to ensure precise alignment during repeated connections.

Uploaded by

nokiaa7610
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
96 views4 pages

Using Tetra

Maury Precision Flanges (MPF) provide precise mating of waveguide flanges, improving connection consistency and repeatability over standard flanges. MPF flanges are used on Maury calibration kits and low VSWR components. They mate with various standard flange types depending on the band. MPF flanges have precision index holes and optional alignment pins to ensure precise alignment during repeated connections.

Uploaded by

nokiaa7610
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Coaxial & Waveguide Adapters

Waveguide Flange Information


Maury Precision Flanges (MPF)
Description
Maury MPF flanges are designed to provide precise mating of
flanges when repeated connections are required or in systems
where optimum waveguide alignment is critical. Some MPF series
flanges also allow mating to more than one type of flange interface,
which amplifies their versatility and economy when mating
different flange types within a band. Please refer to the "mates with"
column in the chart below to see the possible combinations.
MPF flanges are provided on components used in Maury
calibration kits or on low VSWR components such as waveguide to MPF flanges also have a raised outer ring which prevents the
coax adapters with VSWR of 1.10 or better. mating surfaces from cocking due to uneven torque applied to the
flange bolts. To obtain complete technical descriptions, please
MPF flanges in WR22 and smaller waveguide (millimeter wave
request the data sheets shown in the Maury Data Sheet column.
sizes) provide dramatic improvements in connection consistency,
repeatability and serviceability versus standard UG flanges, while NOTE: All Maury MPF flanges have precision index holes.
still maintaining mating compatibility with these older designs (see Corresponding slip-fit alignment pins are also available. Together,
Maury data sheet 5E-030). As in larger waveguide sizes, these these ensure precise alignment and repeatable mating in
flanges have two precision index holes and slip-fit alignment pins. waveguide connections. All Maury waveguide VNA calibration kit
(Threaded pins may also be installed in the standard four-pin components come with MPF flanges. Alignment pins are available
pattern when mating to standard UG flanges. Both types of pins are separately. See Maury data sheet 3A-996 for details.
removable, making the flange face available for servicing.)

Maury Precision Flange Reference Chart


BAND EIA WR NUMBER MPF DESIGNATION MATES WITH MAURY DATA SHEET
L 650 MPF650 UG417A/U (without groove)
R 430 MPF430 UG435/U (without groove) 5E-016
D 340 MPF340 CPR340F
S 284 MPF284 UG53/U, UG54A/U, CPR284 5E-002
S 284 MPF284B UG53/U, UG54A/U, CPR284, CMR284 5E-002A
S 284 MPF284C UG53/U, UG54A/U 5E-002B
E 229 MPF229 CPR229, CMR229 5E-003
E 229 MPF229B CPR229 5E-003A
G 187 MPF187 UG149A/U, UG148B/U, CPR187 5E-004
G 187 MPF187C UG149A/U, UG148B/U 5E-004A
F 159 MPF159 CPR159, CMR159 5E-011
F 159 MPF159B CPR159 5E-011A
C 137 MPF137 UG344/U, UG343A/U, CPR137 5E-005
C 137 MPF137C UG344/U, UG343A/U 5E-005A
H 112 MPF112 UG51/U, UG138/U, CPR112F & G 5E-001
H 112 MPF112B UG51/U, UG52/U 5E-001A
H 112 MPF112C UG51/U, UG52/U, CMR112 5E-001C
HS 102 MPF102 UG1493 5E-014
X 90 MPF90 UG39/U, UG40A/U, CPR90 5E-006
X 90 MPF90A UG39/U, UG40A/U, CMR90 5E-006
X 90 MPF90B UG39/U, UG40A/U 5E-006A
M 75 MPF75A & B M3922/70-004 & -005 5E-007
P 62 MPF62 UG419/U, UG541A/U 5E-008
N 51 MPF51A & B M3922/70-010, -011, -012, -022, -023, -024 5E-012
N 51 MPF51C Agilent Type, UBR180 5E-013
K 42 MPF42 UG595/U, UG596/U 5E-009
Q 34 MPF34 UG595U, UG596/U, UG1530/U 5E-019
U 28 MPF28 UG599/U, UG600/U 5E-010
J 22 MPF22 UG383/U 5E-030
T 19 MPF19 UG383/U 5E-030
V 15 MPF15 UG385 5E-031
Y 12 MPF12 UG385 5E-031
Z 10 MPF10 UG385 5E-031

MAURY MICROWAVE CORPORATION 128 VNA Calibration Kits, Microwave Components & Adapters
Coaxial & Waveguide Adapters

Standard Waveguide Flange Specifications

WR650 WG6 R14 WR430 WG8 R22


UG417A/U (without groove) UG435B/U (without groove)
Dimensions inches mm Dimensions inches mm
A 5.44 138.18 A 4.19 106.38
B 8.69 220.73 B 6.34 161.04
E 2.31 58.69 E 1.72 43.69
F 1.25 31.73 F 0.94 23.83
G 2.37 60.30 G 1.79 45.39
H 3.94 100.00 H 2.79 70.99
Hole Dia. 0.330 1 8.20 Hole Dia. 0.257 1 6.71

WR284 WG10 R32 WR229 WG11A R40


UG53/U CPR229F UDR40
Dimensions inches mm Dimensions inches mm
A 2.76 70.20
A 5.31 134.87
B 3.89 98.73
B 4.75 120.65 E 1.05 26.67
F 0.50 12.70
Hole Dia. 0.257 1 6.50
G 1.07 27.18
H 1.62 41.15
Hole Dia. 0.257 1 6.50

WR187 WG12 R48 WR159 WG13 R58


UG149/U UAR48 CPR159 UDR58
Dimensions inches mm Dimensions inches mm
A 2.44 61.98
A 3.64 92.33
B 3.18 80.77
B 3.25 82.55 E 0.88 22.35
F 0.38 9.53
Hole Dia. 0.330 1 5.13
G 0.50 12.70
H 1.27 32.26
Hole Dia. 0.257 1 6.50

WR137 WG14 R70


UG344/U UAR70
Dimensions inches mm
A 3.13 79.50
B 2.75 69.85
Hole Dia. 0.199 1 5.16

1 English and metric hole sizes may differ slightly.

MAURY MICROWAVE CORPORATION 129 VNA Calibration Kits, Microwave Components & Adapters
Coaxial & Waveguide Adapters

Standard Waveguide Flange Specifications

WR112 WG15 R84 WR90 WG16 R100


UG51/U UBR84 UG39/U UBR100
Dimensions inches mm Dimensions inches mm
A 1.875 1 47.90 A 1.625 1 41.40
E 0.737 18.72 E 0.640 16.26
F 0.676 17.17 F 0.610 15.49
Hole Dia. 0.169 2 4.255 Hole Dia. 0.169 2 4.255

WR75 WG17 R120 WR62 WG18 R140


COM’L UBR120 UG419/U UBR140
Dimensions inches mm Dimensions inches mm
A 1.50 1 38.83 A 1.31 1 33.30
E 0.561 14.25 E 0.478 12.14
F 0.520 13.21 F 0.497 12.63
Hole Dia. 0.144 2 4.085 Hole Dia. 0.144 2 4.085

WR51 WG19 R180 WR42 WG20 R220


COM’L UG595/U UBR220
Dimensions inches mm Dimensions inches mm
A 1.31 1 33.27 A 0.875 1 22.41
E 0.497 1 12.62 E 0.335 8.51
F 0.478 1 12.14 F 0.320 8.13
Hole Dia. 0.144 2 3.658 Hole Dia. 0.116 2 3.07

WR34 WG21 R260


UG1530
Dimensions inches mm
A 0.875 1 22.41
E 0.335 1 8.51
F 0.320 1 8.13
Hole Dia. 0.116 2 3.07

1 CAUTION: U.S. MIL and commercial flange dimensions differ from IEC flanges.
2 English and metric hole sizes may differ slightly.

MAURY MICROWAVE CORPORATION 130 VNA Calibration Kits, Microwave Components & Adapters
Coaxial & Waveguide Adapters

Standard Waveguide Flange Specifications

WR28 WG22 R320 WR22 WG23 R400


UG599/U UG383/U
Dimensions inches mm Dimensions inches mm
A 0.75 19.05 A 1.13 28.85
E 0.265 6.73 B 0.94 23.81

F 0.250 6.35 C Holes 4-40 UNC-2B

Hole Dia. 0.116 2.98 D Holes 0.063 1.613


E Dowels 0.061 1.555

WR19 WG24 R500 WR15 WG25 R620


UG383/U UG385/U
Dimensions inches mm Dimensions inches mm
A 1.13 28.85 A 0.750 19.05
C Holes 4-40 UNC-2B B 0.563 14.29
D Holes 0.063 1.613 C Holes 4-40 UNC-2B
E Dowels 0.061 1.555 D Holes 0.063 1.613
All Holes 0.938 23.81 E Dowels 0.061 1.555

WR12 WG26 R740 WR10 WG27 R900


UG387/U UG387/U
Dimensions inches mm Dimensions inches mm
A 0.750 19.05 A 0.750 19.05
B 0.563 14.29 B 0.563 14.29
C Holes 4-40 UNC-2B C Holes 4-40 UNC-2B
D Holes 0.063 1.613 D Holes 0.063 1.613
E Dowels 0.061 1.555 E Dowels 0.061 1.555
All Holes 0.563 14.29 All Holes 0.563 14.29

MAURY MICROWAVE CORPORATION 131 VNA Calibration Kits, Microwave Components & Adapters

You might also like