Scribd
Upload
406 views2 pages

RTA M CutSheet

The RTA-M is an omni-directional microphone designed for use with Driverack units to provide accurate real-time audio analysis from 20 Hz to 20 kHz. It operates on phantom power supplied by Driverack, comes with a clip and case, and has a frequency response of 20 Hz to 20 kHz with a sensitivity of -63 dB and a maximum SPL of 120dB.

Uploaded by

JairoGR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
406 views2 pages

RTA M CutSheet

The RTA-M is an omni-directional microphone designed for use with Driverack units to provide accurate real-time audio analysis from 20 Hz to 20 kHz. It operates on phantom power supplied by Driverack, comes with a clip and case, and has a frequency response of 20 Hz to 20 kHz with a sensitivity of -63 dB and a maximum SPL of 120dB.

Uploaded by

JairoGR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

dbx RTA-M

The RTA-M is an omni-directional, flat frequency measurement microphone specially


designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz ,
ensuring accurate "pinking"/real-time analysis of your audio. It runs on phantom power
(supplied by the Driverack units) and comes with a clip and case.
Features:
Polar Pattern : omni-directional
Element : back electret-Condenser
Frequency Response : 20 Hz - 20 kHz
Impedance : 250 +/-30% (at 1,000Hz)
Sensitivity : -63 dB +-3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Operating Voltage : phantom power 9V-52VDC
Max. SPL : 120dB
SN Ratio: More than 66 dB (+ 66 dB)
Self Noise: -28 dB

You might also like