Scribd
Upload
271 views3 pages

PSE25-600-70 SOFTSTARTER: General Information

This document provides product information for the PSE25-600-70 softstarter. It can be used with main voltages from 208-600V AC and control supply voltages from 100-250V AC. It has an overload protection function and adjustable rated motor current from 30-100%. Key dimensions and technical specifications are listed, along with environmental conditions, certifications, and packaging details.

Uploaded by

Mario Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
271 views3 pages

PSE25-600-70 SOFTSTARTER: General Information

This document provides product information for the PSE25-600-70 softstarter. It can be used with main voltages from 208-600V AC and control supply voltages from 100-250V AC. It has an overload protection function and adjustable rated motor current from 30-100%. Key dimensions and technical specifications are listed, along with environmental conditions, certifications, and packaging details.

Uploaded by

Mario Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

PSE25-600-70

PSE25-600-70 SOFTSTARTER

—
General Information
Global Commercial Alias PSE25-600-70
Extended Product Type PSE25-600-70
Product ID 1SFA897102R7000
ABB Type Designation PSE25-600-70
EAN 7320500400609
Catalog Description PSE25-600-70 SOFTSTARTER
Long Description Softstarter PSE25-600-70 for max 600V main voltage and 100 - 250V 50/60Hz control supply voltage.

—
Ordering
Minimum Order Quantity 1 piece
Customs Tariff Number 85044090

—
Popular Downloads
Data Sheet, Technical Information 1SFC132005C0201
Instructions and Manuals 1SFC132057M0201

—
Dimensions
Product Net Width 90.000 mm
Product Net Height 245.000 mm
Product Net Depth / Length 185.500 mm
Product Net Weight 2.4 kg

—
Technical
Rated Operational Voltage Main Circuit 208 ... 600 V AC
Rated Control Supply Voltage (U s ) 100 ... 250 V AC

Rated Control Circuit Voltage (U c ) DC Operation 24 V

Rated Frequency (f) Main Circuit 50/60 Hz


Control Supply 50/60 Hz
Rated Operational Power - In-Line Connection (Pe) (230 V) 5.5 kW
(400 V) 11 kW
(500 V) 15 kW
Rated Operational Current - In-Line Connection (Ie) 25 A
PSE25-600-70 2
Service Factor Percentage 100 %
Overload Protection Build-in electronic overload protection
Integrated Electronic Overload Yes
Adjustable Rated Motor Current Ie 30 ... 100 %
Starting Capacity at Maximum Rated Current Ie 4xIe for 10s
Ramp Time During Start 1 ... 30 second [unit of time]
During Stop 0 ... 30 second [unit of time]
Initial Voltage During Start 30 ... 70 %
Step Down Voltage Special Ramp No %
Current Limit Function 1.5 … 7xIe
Switch for Inside Delta Connection No
Run Signal Relay Yes
By-pass Signal Relay Yes
Fault Signal Relay Yes
Overload Signal Relay Yes
Analog Outputs 4…20 mA
Signal indication completed start ramp (LED) Green
Signal indication ready to start/standby ON (LED) Green
Signal indication running R (LED) Green
Signal indication ramping up/down (LED) Green
Signal indication protection (LED) Yellow
Signal indication fault (LED) Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON 10
Time 50% OFF Time
Communication FiledBusPlug(Optional)
Degree of Protection acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
Terminal Type Screw Terminals
Connecting Capacity Main Circuit Rigid 1/2x2.5 ... 70 mm²
Connecting Capacity Control Circuit Rigid 1x2.5 mm²
Rigid 2x1.5 mm²
Connecting Capacity Supply Circuit Rigid 1x2.5 mm²
Rigid 2x1.5 mm²
Tightening Torque Main Circuit 9 N·m
Supply Circuit 0.5 N·m
Control Circuit 0.5 N·m
Product Main Type PSE25

—
Environmental
Ambient Air Temperature Storage -40 ... +70 °C
Operation -25 ... +60 °C
RoHS Status Following EU Directive 2002/95/EC August 18, 2005 and amendment

—
Certificates and Declarations (Document Number)
Declaration of Conformity - CE 2CMT003496
Environmental Information 1SFC132042D0201
Instructions and Manuals 1SFC132057M0201
RoHS Information 1SFC132043D0201

—
Container Information
PSE25-600-70 3
Package Level 1 Width 130 mm
Package Level 1 Depth / Length 295 mm
Package Level 1 Height 240 mm
Package Level 1 Gross Weight 2.65 kg
Package Level 1 EAN 7320500400609
Package Level 1 Units 1 piece
Package Level 2 Units 1 piece

—
Classifications
Object Classification Code Q
E-nummer 3302018
ETIM 4 EC002572 - Electronic motor control and protection device
ETIM 5 EC002572 - Electronic motor control and protection device

—
Categories
Low Voltage Products and Systems  → Control Products  → Softstarters  → Softstarters

You might also like