Starrett Kezi Akcios 2010

10 20 30 40 50 60 70 80 90 100 110 PRECISION TOOLS
CATALOGUE www.starrett.co.uk • +44 (0)1835 863501

Athol, Massachusetts, USA
Laguna Hills, California, USA
Waite Park, Minnesota, USA
Cleveland, Ohio, USA
Mount Airy, North Carolina, USA Santo Domingo, Dominican Republic
2
MANUFACTURED AND MARKETED WORLDWIDE
STARRETT CORPORATE HEADQUARTERS AND INTERNATIONAL LOCATIONS
Jedburgh, Scotland
Suzhou, China
The L.S. Starrett Company has been involved

in precision tool manufacturing since 1880,
sold products worldwide since the 1890s and
introduced its first saw blade in about 1904.
Starrett Distribution Centers and Offices Headquartered in Athol, MA since its

Factories founding, Starrett has a tradition and
reputation so rich and solid that the words
“quality” and “Starrett” have become
Itu, São Paulo, Brazil
synonymous.
The Company employs over 2,000 people

worldwide with sales of over $200,000,000.
3
CONTENTS
CALIPERS
06 Water Resistant Electronic Digital Calipers
06 Electronic Digital Calipers
06 Long Range Electronic Digital Calipers
06 Dial Calipers
06 Vernier Calipers
06 Vernier Calipers With Fine Adjustment
07 Long Range Vernier Calipers
07 Carbon Fibre Calipers
7 Internal/External Caliper
7 Pocket Slide Caliper
MICROMETERS
8, 9 Electronic Digital Micrometers
09 Standard Outside Micrometers
09 Micrometer Sets
09 Micrometer Stand
10 Precision End Measuring Rods
10 Outside Micrometers With Interchangeable Anvils
10 Blade Type Micrometers
10 Disc Type Micrometers
10 Sheet Metal Micrometers
11 Mul-T-Anvil Micrometers
11 Rounded Anvil Micrometers
11 V-Anvil Micrometers
11 Stainless Steel Can Seam Micrometers
12 Depth Micrometers
12 Electronic Digital Depth Micrometer
12 Electronic Digital Micrometer Heads
13 Standard Micrometer Heads
13 Long Range Micrometer Heads
13 Solid-Rod Inside Micrometers
14 Tubular Inside Micrometers

BORE GAUGE SETS
13 3 Point Internal Bore Gauge Micrometer Sets
14 3 Point Electronic Digital Internal Micrometers
14 Bore Gauge Sets
GAUGES
7 Electronic Digital Depth Gauges & Accessories
7 Vernier Depth Gauges
8 Electronic Digital Height Gauges
12 Dial Indicator Groove Gauges
15 Small Hole Gauges
15 Telescoping Gauges
17 Dial Gauge Stands
19 Thickness Gauges
19 Engineers’ Combination Taper, Wire & Thickness Gauge
19 Taper Gauges
20 “Feeler Stock” Thickness Gauges
21 Screw Pitch Gauges
21 Radius Gauges
27 Saw Tension Gauge
27 Crankshaft Distortion Dial/Strain Gauge
4
CONTENTS
INDICATORS
15 Dial Indicators
15 Electronic Digital Indicators
16 Electronic Digital Indicators - Wisdom® Plus
16 Dial Test Indicators
16 Universal Back-Plunger Dial Indicators
17 Indicator Holders
GAUGE BLOCK SETS

26 Gauge Block Sets
26 Rectangular Gauge Block Accessories

GRANITE SURFACE PLATES
26 Charcoal Black Granite Surface Plates
26 Granite Surface Plate Stands
28 Granite Surface Plate Cleaner
GENERAL PRECISION MEASURING INSTRUMENTS, SERVICE

& REPAIR TOOLS
18 Precision Steel Squares
18 Combination Sets
18 Steel Rules
21 Spring Dividers
21 Spring Calipers
22 Universal Bevel Vernier Protractor
22 Steel Protractor
22 Angle Meter
22 Dual-Vee Magnetic V-Block
22 V-Blocks & Clamps
22 Precision Level
23 Bench Level
23 Machinists’ Levels
23 Adjustable Parallels
23 Steel Parallels
24 Automatic Centre Punches
24 Centre Punches
24 Drive Pin Punches
24 Long Range Drive Pin Punches
24 Brass Drive Pin Punches
25 Pin Vises
25 T-Handle Tap Wrenches
25 Pocket Scriber
25 Edge Finders
25 Centre Finders
27 Pocket Laser Tachometer
27 Shaft Alignment Clamp Sets
28 M1 All Purpose Lubricant
28 Tool & Instrument Oil
5
CaliperS - DIGITAL, DIAL & VERNIER
797 series - WATER RESISTANT Electronic 1201 & 1202 series - dial calipers
DIGITAL CALIPERS
1201M-150
The Starrett 1201 and 1202 Dial Calipers • Knife edge contacts for inside and outside
797B-6/150 have the ability to provide quick, accurate measurements.
measurement of outside and inside diameters • Adjustable bezel.
and depth. The dial caliper is the most • Lock screws for sliding jaw and dial bezel.
versatile precision hand tool on the market. • Thumb-operated fine adjustment roll.
IP65 PROTECTION AGAINST COOLANT, • Instant inch/mm conversion.
Cat No Range Graduation Item No
WATER, DIRT AND DUST. • Fine adjustment thumb wheel.
• IP65 level of protection against foreign 1201M-150 150mm BQ994
The Starrett 797 Electronic Caliper provides an 0.01mm
matter. 1201M-200 200mm BQ995
IP65 level of protection against coolant, water,
• Large, easy to read LCD display.
dirt and dust in hostile shop environments. 1202M-150 150mm BQ996
• Hardened stainless steel measuring
In addition to being coolant and water
surface for long life. 1202M-200 200mm 0.02mm BQ997
resistant, the 797 also offers excellent
• Zero the reading at any position. 1202M-300 300mm BQ998
protection against other contaminants.
• Output port.
1202-6 6” BQ9991
Cat No Range Graduation Item No 1202-8 8” 0.001” BQ9993
797B-6/150 150mm / 6” DM610 1202-12 12” BQ9995
797B-8/200 200mm / 8” 0.01mm / 0.0005” DM612

797B-12/300 300mm / 12” DM614 125 series - vernier calipers
799 series - Electronic digital CaliperS

125MEB-6/150
The 125 Series is a high quality, basic vernier • High quality basic vernier caliper.
799-6/150 caliper that offers both inch and metric • Lock screw for sliding jaw.
measurement. • Hardened stainless steel depth rod.
• Sharp, black graduations on the satin
finished bar.
799 Electronic Calipers are light, comfortable, • Instant inch/mm conversion.
easy to use and constructed with features • Zero the reading at any position. Cat No Range Graduation Item No
that have made Starrett slide calipers the • Fine adjustment thumb wheel.
machinists’ first choice for many years. 125MA-150 150mm BR5820
• Lightweight, ergonomic design.
Offering a slim, streamlined profile, a large • Large, easy to read LCD display. 125MA-200 200mm 0.02mm BR5824
clear easy to read LCD display, long life
battery and function buttons for zero and 125MA-300 300mm BR5828
inch/mm. 125MB-150 150mm BR5822
125MB-200 200mm 0.05mm BR5826
125MB-300 300mm BR5830
799-6/150 150mm / 6” DM620
125MEA-6/150 150mm / 6” BR550
799-8/200 200mm / 8” 0.01mm / 0.0005” DM625
125MEA-8/200 200mm / 8” 0.02mm / 0.001” BR578
799-12/300 300mm / 12” DM630
125MEA-12/300 300mm / 12” BR564
125MEB-6/150 150mm / 6” BR555
799 series - long range electronic 125MEB-8/200 200mm / 8” 0.05mm / 1/128” BR561
digital CaliperS 125MEB-12/300 300mm / 12” BR567
125MEAW series - vernier caliperS

799AZ-24/600 with fine adjustment
799 Series also offers a small selection of • Instant inch/mm conversion.

long range calipers measuring from 600mm • Zero the reading at any position.
125MEAW-5/130
(24”) to 1000mm (40”). • LCD characters are 13mm (1/2”) high.
• Fine adjustment thumb wheel.
Cat No Range Graduation Item No 125MEAW-5/130 0 - 130mm / 0 - 5” BR5902
799AZ-24/600 600mm / 24” DM6302 125MEAW-7/180 0 - 180mm / 0 - 7” 0.02mm / 0.001” BR5904
0.01mm / 0.0005”
799AZ-40/1000 1000mm / 40” DM6305 125MEAW-11/280 0 - 280mm / 0 - 11” BR5906
6
Calipers & DEPTH gauges
1251 series - long range vernier CaliperS 1025 series - POCKET SLIDE CALIPER
1251MEA-20/500
Long range vernier caliper complete with fine • Sharp, black graduations on the satin Range Depth Of Width Of Graduation
adjustment thumb wheel. finished bar. Cat No Size Item No
Outside Inside Jaws Nibs Closed Slide Stock
• Fine adjustment thumb wheel.
0-96mm/ 6-100mm/ 36mm/ 6mm/ 1/2mm
1025ME-130 130mm / 5” mm DP767
Cat No Range Graduation Item No 0-3.3/4” 1/4-4” 1.3/8” 0.236” 64ths
1251MEA-12/300 300mm / 12” BR5860

1251MEA-20/500 500mm / 20” BR587 3753 SERIES - ELECTRONIC digital
0.02mm / 0.001”
1251MEA-24/600 600mm / 24” BR588 DEPTH GAUGEs & Accessories
1251MEA-40/1000 1000mm / 40” BR5890
5000 series - Carbon Fibre CaliperS

3753A-6/150
This light, portable and easy to use • Hardened stainless steel body and slide
depth gauge is reliable and accurate for for long life.
measurements to 0.01mm (0.0005”). • Fine adjustment thumb wheel.
• Sharp, easy to read LCD display.
• Hook attachment is furnished with the
gauge, making it possible to take readings
• Strong, lightweight and stable carbon • Large easy to read display with resolution from the edge of the workpiece to edges
fibre bar. 0.01mm/0.0005”. of slots, grooves, shoulders and other ID
• Ti N coated stainless steel jaws. • MM/Inch conversion. length dimensioning.
• Tight, smoothly fitted slides for maximum • Output port. • Lock to hold the slide in position.
accuracy and easy adjustment. • Two preset modes to install any reading at • Instant inch/mm conversion.
• Locknut to hold measurement. any point.
• Screw-type adjusting nut allows for fine • Ability to zero the reading at any position. Cat No Range Graduation / Description Item No
measuring adjustment. • Packed in a wooden case.
3753AZ-6/150 150mm / 6” DR9450
3753AZ-8/200 200mm / 8” 0.01mm / 0.0005” DR9453
3753AZ-12/300 300mm / 12” DR9456
B5000BZ-20/500 500mm / 20” DR9600 3648-180 180mm Base Extension With Screws DR94250
B5000BZ-24/600 600mm / 24” 0.01mm / 0.0005” DR9603 3648-260 260mm Base Extension With Screws DR94251
B5000BZ-40/1000 1000mm / 40” DR9606 3648-320 320mm Base Extension With Screws DR94252
448 series - VERNIER DEPTH gauges

5006 series - internal / external Caliper
These are easy to use, very accurate depth • Heads are hardened, ground and lapped.
gauges. They are designed for measuring the • Measuring blades are hardened and
• Stainless steel construction. • MM/Inch conversion. depths of holes, slots and recesses and for ground and have accurate and sharp
• Interchangeable ball contact standard. • Output port. inspecting jig, fixtures and die work. They are machine divided graduations.
• Other contacts available on special •Two preset modes to install any reading at also ideal for measuring from a plane surface • Slide lock nut to hold measurement.
request. any point. to toolmakers’ buttons for locating centre • Screw type adjusting nut allows for fine
• Tight, smoothly fitted slides for maximum • Ability to zero the reading at any position. distances. measuring adjustment.
accuracy and easy adjustment. • Packed in a wooden case. • All metric graduations read to 0.02mm with
• Lock nut to hold measurements. the bar graduated in 0.5mm increments.
• Large easy to read display with resolution
0.01mm/0.0005”. Cat No Range Blades Furnished Base Length x Width Item No
448MEZ-6 0 - 150mm / 0 - 6” One (150mm / 6”) CV732
448MEZ-12 0 - 300mm / 0 - 12” One (300mm / 12”) 70 x 6.35mm / CV734
Internal: 42-350mm / 1.654”-13.780” 2.3/4” x 1/4”
5006BZ-14/350 0.01mm / 0.0005” DR9620 Two (150mm / 6” &
External: 0-270mm / 0”-10.630” 448MEZ-612 0 - 300mm / 0 - 12” CV752
300mm / 12”)
7
Height Gauges & EXTERNAL micrometerS
electronic digital height gauges 795 / 796 Series - Electronic digital

with or without output Micrometers with or without output
3751AZ-6/150
795MEXFL-25
Starrett 795 and 796 Electronic Micrometers • IP67 level of protection against coolant,
provide an IP67 level of protection against water, dust and dirt.
coolant, water, chips, dirt, dust and other • Starrett no-glare satin chrome finish on
contaminants in hostile shop environments. thimble and sleeve.
The 795 includes an RS232 output port for • Balanced, tapered frame for comfortable
data transmission. and accurate measuring.
The 796 has all of the features of the 795 • Micro-lapped carbide measuring faces.
except that it does not include output. • Extremely hard and stable one piece
Both micrometers have carbide measuring spindle, the heart of our accuracy and
faces. smooth operating one piece friction
thimble.
796MXFL-25 DM6015
0 - 25mm / 0 - 0.984” 0.001mm / 0.00005”
795MEXFL-25 DM6005
733 / 3734 series - electronic digital

3751AZ-6/150 - Supplied In micrometers with or without output
Aluminium Case
Starrett 3751 Electronic Height Gauge features • Instant inch/mm conversion. 733MEXFL-25
an easy to read display, hardened, stainless • Zero the reading at any position.
steel bar for long life and a hardened, ground • Lock to hold slide in position.
and lapped base with finger grooves which • Vertical bar is back from the edge of the
The 733 and 3734 are full function electronic • Carbide measuring faces.
provides fine adjustment movement with nose to provide better stability.
outside micrometers complete with a full • Ability to zero reading at any position.
ease. • Manual on/off plus a built in automatic
range of features. • 733 Series - Output signal, PRESET button
off after 5 minutes of non use.
The 733 Series is offered in a wide variety to install any reading at any position.
of sizes up to 150mm (6”) complete with an • Install minimum and maximum limits.
output port for transmitting data. • Automatic switch OFF after 30 minutes of
The 3752 Electronic Height Gauge is a full • Clear bar graduations in 5mm increments.
The 3734 Series is available in a 0-25mm non-use.
featured, versatile and economic solution for • Instant inch/mm conversion.
(0-1”) version. No output port available. • Instant inch/mm conversion.
most height measurement applications. All • Large LCD display.
• 3734 No output.
measuring information from these tools can • “Hold” control feature retains a reading at
be entered directly into Starrett Data Collection any position.
Systems for analysis, data collection and hard • Ability to retain and return to the true zero
copy documentation. reading of the height gauge. Cat No Range Graduation Item No
733MEXFL-25 0 - 25mm / 0 - 1” DL966920
Cat No Range Graduation Item No 733MEXFLZ-50 25 - 50mm / 1 - 2” DL966921
3751AZ-6/150 150mm / 6” 0.01mm / 0.0005” DR9430 733MEXFLZ-75 50 - 75mm / 2 - 3” DL966922

0.001mm / 0.00005”
3752-24/600 600mm / 24” 0.01mm / 0.0005” DR9054 733MEXFLZ-100 75 - 100mm / 3 - 4” DL966923
733MEXFLZ-125 100 - 125mm / 4 - 5” DL966924
733MEXFLZ-150 125 - 150mm / 5 - 6” DL966925
3734xfl-1 0 - 25mm / 0 - 1” 0.001mm / 0.00005” dl9671
8
EXTERNAL micrometers, SETS & Accessories
3732 series - Electronic digital Cat No Range Graduation Item No

436xrl-7 6 - 7” cr652
micrometers without output 436xrl-8 7 - 8” cr692
436xrl-9 8 - 9” cr732
NEW 436xrl-10
436xrl-11
9 - 10”
10 - 11”
0.001” cr772
cr812
436xrl-12 11 - 12” cr852
V436.2MXRL-25 0 - 25mm CU9508

0.001mm
coming soon
V436.1MXRL-50 25 - 50mm CU9516
T436.1XRL-1 0 - 1” CU9412
0.0001”
T436.1XRL-2 1 - 2” CU9428
3732MEXFL-25 0 - 25mm / 0 - 1”
3732MEXFLZ-50 25 - 50mm / 1 - 2”
NEW Product S436 SERIES - micrometer sets with
Coming Soon.
3732MEXFLZ-75 50 - 75mm / 2 - 3” Available October 2009. standards
0.001mm / 0.00005”
3732MEXFLZ-100 75 - 100mm / 3 - 4” Image shown is a display
model only and the
3732MEXFLZ-125 100 - 125mm / 4 - 5” actual micrometer may
vary slightly.
3732MEXFLZ-150 125 - 150mm / 5 - 6”
436 SERIES - standard outside

micrometers S436.2MCXRLZ
436.2MXRL-25
Cat No Range Graduation Description Item No
Each set includes: 25, 50,
75, 100, 125 & 150mm
S436.2MCXRLZ 0 - 150mm 0.01mm CU9735
Micrometers, with Five
These are the most popular precision • Carbide measuring faces.
Standards, in Case
micrometers used by skilled workmen • Starrett satin chrome finish - no glare and
worldwide. They are accurate, rugged and rust resistant. Each set includes: 25, 50,
easy to use. • Extremely hard and stable one piece 75, 100, 125, 150, 175, 200,
S436MEXRLZ 0 - 300mm 0.01mm 225, 250, 275 & 300mm CU877
No other micrometer manufacturer can spindle (the heart of our accuracy). Micrometers, with Eleven
match the breadth and depth of the Starrett • Ring-type knurled lock nut for quick and Standards, in Case
product line. sure locking.
Each set includes:
1”, 2”, 3”, 4”, 5” & 6”
Cat No Range Graduation Item No S436.1CXRLZ 0 - 6” 0.001” CU9645
Micrometers, with Five
436.2MXRL-25 0 - 25mm CU9800 Standards, in Case
Each set includes:
436.1MXRL-50 25 - 50mm CU9514
1”, 2”, 3”, 4”, 5”, 6”, 7”, 8”,
436.1MXRL-75 50 - 75mm CU9522 S436EXrlSz 0 - 12” 0.001” 9”, 10”, 11” & 12” CU537
Micrometers, with Eleven
436.1MXRL-100 75 - 100mm CU9532 Standards, in Case
436.1MXRL-125 100 - 125mm CU9542
436.1MXRL-150 125 - 150mm
0.01mm
CU9552 3206 series - micrometer stand
436MXRL-175 150 - 175mm CS772
436MXRL-200 175 - 200mm CS812
436MXRL-225 200 - 225mm cs852
436mxrl-250 225 - 250mm cs892
436mxrl-275 250 - 275mm cs932
436mxrl-300 275 - 300mm cs972
436.1XRL-1 0 - 1” CU9408
436.1XRL-2 1 - 2” CU9424 A new universal holder complete with a • Adjustable position yolk.
436.1XRL-3 2 - 3” CU9438 heavier cast base. • Nylon holding pads.
0.001” • Non skid rubber pads.
436.1XRL-4 3 - 4” CU9450
436.1XRL-5 4 - 5” CU9460 Cat No Capacity Inclination Item No
436.1XRL-6 5 - 6” CU9470 3206 16mm / 5/8” 45° DR9420
9
micrometerS & Accessories
234 SERIES - PRECISION END MEASURING 486 SERIES - BLADE TYPE MICROMETERS
RODS WITH NON-ROTATING SPINDLE
234 Rod With Insulating Handle
These rods or “standards” are for checking • Manufactured from a special tool steel.
and setting micrometers of 50mm (2”) • Hardened ends and accurately lapped to a
capacity and larger, and are also used spherical radius.
on machine tools for comparing gauges, The Starrett 486 Series is designed for fast • Non-rotating spindle prevents blade
checking precision measuring tools, parallel and accurate measurements of circular form from turning in narrow slots or rolling off
surfaces, and many other types of work. tools, diameter and depth of narrow grooves, shoulder.
slots, keyways, recesses and depths between • Blade thickness is 0.8mm.
Cat No Range Item No Cat No Range Item No lands and fins. • Blades will measure to 8mm depths.
• Starrett satin chrome finish - no glare -
234MA-25 25mm CC437 234A-1 1” CC317
resists rust.
234MA-50 50mm CC442 234A-2 2” CC322
Cat No Range Graduation Item No Cat No Range Graduation Item No
234MA-75 75mm CC447 234A-3 3” CC327
486MP-25 0 - 25mm CZ142 486P-1 0 - 1” CZ082
234MA-100 100mm CC452 234A-4 4” CC332
486MP-50 25 - 50mm CZ152 486P-2 1 - 2” CZ092
234MA-125 125mm CC457 234A-5 5” CC337 0.01mm 0.001”
486MP-75 50 - 75mm CZ162 486P-3 2 - 3” CZ102
234MA-150 150mm CC462 234A-6 6” CC342
486MP-100 75 - 100mm CZ172 486P-4 3 - 4” CZ112
234MA-175 175mm CC467 234A-7 7” CC347
234MA-200 200mm CC472 234A-8 8” CC352
256 SERIES - DISC TYPE MICROMETERS
234MA-225 225mm CC477 234A-9 9” CC357
234MA-250 250mm CC482 234A-10 10” CC362
WITH ROTATING OR NON-ROTATING SPINDLES
234MA-275 275mm CC487 234A-11 11” CC367
234MA-300 300mm CC492 234A-12 12” CC372
234 Rods are also available without insulating handle. Cat No. changes to 234MB.
Please note that these standards are supplied with all micrometers that are furnished with
standards.
224 SERIES - OUTSIDE MICROMETERS These tools are used to measure the
thickness of work sections such as ribs,
• Exremely hard and stable one piece
spindle (the heart of our accuracy).
WITH INTERCHANGEABLE ANVILS lands, fins, cutting edges on form tools and • Micro lapped measuring faces.
chordal thickness of gear teeth. Because of • Tapered frame designed specifically for use
their large anvil and spindle faces, they are in narrow slots and tight places.
also useful for measuring the thickness of • Balanced frame and thimble design insure
sheet materials like paper, rubber, cardboard easy handling and better readability.
and plastics.
Cat No Range Graduation Item No Cat No Range Graduation Item No

256MRL-25 CH368 256RL-1 CH327
224marlz 0 - 25mm 0 - 1”
256MPN-25* CH377 256PN-1* CH332
0.01mm 0.001”
Unusual flexibility, plus a wide range of • Starrett satin chrome finish - no glare and 256MRL-50 25 - 50mm CH387 256RL-2 1 - 2” CH337
measurement makes the Starrett No.224 resists rust.
256MRL-75 50 - 75mm CH397 256RL-3 2 - 3” CH357
Series satin-chrome micrometers very • Advanced sleeve design with staggered
* Non-Rotating Spindle
popular in machine or automotive repair lines and distinct figures for precise and
shops and for all applications requiring a easy readability.
versatile micrometer. • Large thimble diameter with distinct 222 SERIES - SHEET METAL MICROMETERs
figures.
Graduation 0.01mm Graduation 0.001”
Standards Standards
Cat No Range Item No Cat No Range Item No
(mm) (Inches)
224MAARLZ 0 - 100mm 25, 50, 75 BZ742 224AARLZ 0 - 4” 1”, 2”, 3” BZ702
50, 75, 100, 224ARLZ 2 - 6” 2”, 3”, 4”, 5” BZ707
224MARLZ 50 - 150mm BZ747
125 224BRLZ 6 - 9” 6”, 7”, 8” BZ712
150,175,200, 6”, 7”, 8”, 9”,
224MGRLZ 150 - 300mm BZ757 224GRLZ 6 - 12” BZ717 These micrometers reach over the edge of • Balanced frame and thimble design insure
225,250,275 10”, 11”
224CRLZ 9 - 12” 9”, 10”, 11” BZ714 sheet metal and take measurements away easy handling and better readability.
300, 325,
224MDRLZ 300 - 400mm
350, 375
BZ767 12”,13”,14”, from the edge towards the centre. • 150mm throat depth.
224DRLZ 12 - 16” BZ727
15”
400, 425, Cat No Range Anvil Graduation Item No
224MERLZ 400 - 500mm BZ772 16”,17”,18”,
450, 475 224ERLZ 16 - 20” BZ732
19” 222MBXR-25 0 - 25mm 0.01mm BZ482
500, 525, 20”,21”,22”, Flat
224MJRLZ 500 - 600mm BZ777 224JRLZ 20 - 24” BZ737 222BXR-1 0 - 1” 0.001” BZ417
550, 575 23”
10
micrometers
220 series - mul-T-anvil micrometers 207 SERIES - STAINLESS STEEL CAN SEAM
MICROMETERs
A new development in micrometer design and • Balanced frame and thimble design insure
patent is held by Starrett. This micrometer easy handling, better readability.
will handle a wide variety of measurements • Ring type knurled lock nut for quick and
impossible to obtain with regular micrometers, sure locking.
such as measuring the wall thickness of • A choice of smooth friction thimble for
tubing, cylindrical walls from a hole or slot uniform pressure or the combination
to an edge, many hard-to-reach locations ratchet and speeder for uniform pressure
and the thickness of screw heads, shoulder and quicker adjustment.
lengths, etc. Starrett Can Seam Micrometers are made of • Satin finish stainless steel - no glare - rust
stainless steel and designed to measure the and stain resistant.
Cat No Range Graduation Item No thickness and depth of can seams. The No. • Advanced sleeve design with staggered
220MXRL-25 0 - 25mm 0.01mm BZ050
207 Series is used to measure the seam at lines and distinct figures for precise and
the outside bottom edge of the dome on the easy readability.
220XRL-1 0 - 1” 0.001” BY927 top of an aerosol can. • The No. 207 Series has a snub nose which
permits measuring aerosol type cans.
• Extremely hard and stable one piece
576 & 577 Series - rounded anvil
micrometers Cat No Range Graduation Item No
207MZ 0 - 9.5mm 0.01mm BX642
207Z 0 - 0.375” 0.001” BX637
208 SERIES - STAINLESS STEEL CAN SEAM

MICROMETERs
Ideal for measuring the wall thickness of • 576 Series can get into holes as small as
parts such as solid and split bearings, tubing, 8mm (5/16”) and measure up to 13mm
sleeves, collars, rings, various cylinders and (1/2”).
also measuring from the inside of a hole to • 577 Series can get into holes as small as
an edge. 9.5mm (3/8”) and measure up to 25mm
(1”).
Cat No Range Minimum Diameter Graduation Item No

208MDZ
576MXR 0 - 13mm 8mm 0.01mm DC647
577MXP 0 - 25mm 9.5mm 0.01mm DC765
576XR 0 - 1/2” 5/16” 0.001” DC637
577XP 0 - 1” 3/8” 0.001” DC757

Starrett Can Seam Micrometers are made of • Satin finish stainless steel - no glare - rust
stainless steel and designed to measure the and stain resistant.
thickness and depth of can seams. The No. • Advanced sleeve design with staggered
483 SERIES - V-ANVIL MICROMETERS 208 Series is used to measure the thickness lines and distinct figures for precise and
of the seam at the top and bottom of a flat- easy readability.
topped can. • Quick and easy adjustment.
• Extremely hard and stable one piece

208MZ Without Depth Gauge BX757
These micrometers are used to check out-of- • Direct measuring of three fluted tools. 0 - 9.5mm 0.01mm
208MDZ With Depth Gauge BX762
roundness from centreless grinding or other • Advanced sleeve design with staggered
machining operations. They are also used lines and distinct figures for precise and 208Z Without Depth Gauge BX742
0 - 0.375” 0.001”
for measuring odd fluted taps, milling cutters easy readability. 208DZ With Depth Gauge BX752
and reamers.
Cat No Range No of Flutes It Will Measure Graduation Description Item No

483MXRL-25 2 - 25mm 0.01mm Ratchet Stop, CY842
3 Lock Nut,
T483XRL-1 0.093 - 1” 0.0001” Tapered Spindle CY812
11
Groove Gauge, DEPTH micrometerS & MICROMETER HEADS
1175 series - dial indicator groove 440 & 445 SERIES - DEPTH MICROMETERS
gauges
Starrett 440 Gauge Micrometers are furnished • Reading surfaces have a satin chrome
with a 64mm (2.1/2”) base and 3.2mm (1/8”) finish that resists rust.
diameter measuring rods. • Ring-type lock nut for quick and sure
The 445 Series Gauge Micrometers are locking.
furnished with 100mm (4”) bases and have • Combination ratchet and speeder for
A lightweight gauge is used for in-process The reference jaw can be mounted in two 4mm (5/32”) diameter measuring rods. uniform pressure and quicker adjustment.
or bench inspection of oil grooves, snap positions on the range adjusting bar. The bar Other base sizes are available.
ring retainer grooves, “O” ring seat retainer itself is also adjustable for greater or lesser
grooves and similar internal recesses. It is range. A fine adjustment screw and a lock Cat No Range Graduation Base No Of Rods Rod Diameter Description Item No
also useful for checking bore dimensions are also provided. 440MZ-75RL 0 - 75mm 3 CV147
and testing for taper, bell-mouth and out-of-
440MZ-150RL 0 - 150mm 0.01mm 63.5mm 6 3.2mm CV152
roundness. • Supplied with two sets of jaws, both readily
The movable, sensitive gauging contact interchangeable. 440MZ-225RL 0 - 225mm 9 CV157
has a 12.7mm (2.1/2”) retractable range • Three sets of contacts are furnished (Styles 440Z-3RL 0 - 3” 3 With CV127
and transfers the measurement through a 1-10, 2-10, 2-20) that can be attached to Ratchet
440Z-6RL 0 - 6” 0.001” 2.1/2” 6 1/8” Stop CV132
linear, friction-free transfer mechanism to the ends of the jaws without replacing the
& Lock Nut
the dial indicator. The lower reference jaw entire jaw. Contacts have flush ends so that 440Z-9RL 0 - 9” 9 In Case CV142
is fixed and supports the entire weight of grooves at the bottom of blind holes can be 445MBZ-75RL 0 - 75mm 3 CV452
the gauge and the operator’s hands, thus gauged. The contacts are hardened steel
preventing incorrect gauging pressure and with a hard chrome finish for long life. 445MBZ-150RL 0 - 150mm 0.01mm 100mm 6 4mm CV457
false readings. 445MBZ-225RL 0 - 225mm 9 CV462
Cat No Range Graduation Item No 749 SERIES - ELECTRONIC digital DEPTH

1175MZ 9.5 - 150mm 0.01mm DQ767 MICROMETER with output
1175z 0.375 - 6” 0.0005” dq762
STYLE 1-10 STYLE 2-10, 2-20 UPPER JAW

1.25” (32) PROF. PT30915
UPPER JAW 2.50” (64)
MAX. GAUGE DEPTH
.100” .024” PT30916 B MAX. GAUGING DEPTH
(2.54)
A
WILL
ENTER
3.00” (76.2)
GROOVE I.D.
.375” (9.5)
MAX.
GROOVE I.D.
The Starrett 749 has a wide 0-150mm (0- • Adjustable measuring rods are 4mm
MIN.
BORE 6”) range for measuring the depth of most (5/32”) in diameter.
LOWER JAW
LOWER
JAW
holes, slots, shoulders and projections. The • Instant inch/mm conversion.
CONTACT
MOUNTING SCREW
PT30914 CONTACT
MOUNTING SCREW
PT30913
WILL 100mm (4”) base is hardened for long lasting • Ability to zero the reading at any position.
08272-0 ENTER
PT03497 MIN.
BORE
precision. Features include ring-type lock nut • Large, high contrast LCD digital readout.
and combination ratchet and speeder. • With data ouput.
Contact Set Specifications
Style 1-10 is for the smaller jaws and can enter a 9.5mm (0.375”) bore. Styles 2-10 and 2-20 are Cat No Range Graduation Base Item No
used on the larger jaws to reach a range up to 150mm (6”).
749MEBZ-150 0 - 150mm / 0 - 6” 0.001mm / 0.0001” 100mm (4”) DM251
Contact Part No (PT)

Will Enter
Minimum Bore
Maximum Groove
I.D.
A B 762 SERIES - ELECTRONIC digital MICROMETER HEADS WITH
Set
Upper Lower mm inch mm inch mm inch mm inch ROTATING OR NON-ROTATING SPINDLES & with output
Style 1-10 30917 30917 9.5 0.375” 75 3” 2.5 0.100” 0.6 0.024”
Style 2-10 30918 30919 17.5 0.690” 125 5” 3.6 0.140” 0.8 0.034”
Style 2-20 30920 30921 25 1” 150 6” 6.7 0.265” 1.3 0.051”
• Starrett designed microprocessor. • Instant inch/mm conversion.

• Carbide measuring faces. • With data ouput.
• Ability to zero reading at any position. • Attractive black wrinkle finish on frame.

762MEXFL-25 Friction Thimble, Lock Nut DM3930
0 - 25mm / 0 - 1”
762NXRL* 0.001mm / 0.00005” Ratchet Stop, Lock Nut DM3910
762MEXFL-50 0 - 50mm / 0 - 2” Friction Thimble, Lock Nut DM3940
* Non-Rotating Spindle
12
micrometer heads & INSIDE micrometers
460 SERIES - standard MICROMETER 124 SERIES - SOLID-ROD INSIDE

heads MICROMETERS
Measuring I.D. with

These are plain micrometer heads with no micrometer and rod.
lock nut or ratchet.

460MB 0 - 13mm 0.01mm CW987 124MBZ
460b 0 - 1/2” 0.001” CW977
The most popular inside micrometers • Hardened and ground anvils on rods,
because of their lightness, ease of use and adjustable for length. Head anvil is
range. Ideal for measuring inside diameters hardened and ground.
463 SERIES - standard MICROMETER of cylinders and rings, measuring parallel • Each rod marked with length.
surfaces, etc. • Rods are insulated.
heads Rod diameters are approximately 6mm (1/4”) • Measuring rods are solid and assembled
on the A and B sizes, and approximately on one side of the micrometer head.
8.5mm (11/32”) on the C size. Each rod has • Quick-reading figures - every thousandth
individual length adjustment for the anvil by numbered on inch reading tools.
means of special wrenches included.
Reading surfaces are satin finished stainless
Cat No Range Graduation Movement No Of Measuring No Of Spacing Item No
steel for easy readability.
Of Screw Rods Collars
Cat No Range Graduation Description Item No 124MAZ 50 - 200mm 6 BR452
13mm One 12mm
463MRL Ratchet Stop, Lock Nut CX082 124MBZ 50 - 300mm 10 BR462
0.01mm
463ML 0 - 13mm 0.01mm Lock Nut CX077 One 25mm,
124MCZ 200 - 800mm 25mm 4 BR472
463MP Plain CX072 Two 50mm
463L 0 - 1/2” 0.001” Lock Nut CX012 124AZ 2 - 8” 6 BR412

1/2” One 1/2”
124BZ 2 - 12” 0.001” 10 BR422
124CZ 8 - 32” 1” 4 One 1”, Two 2” BR432
263 SERIES - MICROMETER heads

78 SERIES - 3 POINT INTERNAL BORE
GAuGE MICROMETER SETS
• Satin chrome finish, produces no glare. • With or without ring type knurled lock nut
• Available with reverse reading if required. for quick and sure locking.

263MRL* Ratchet Stop, Lock Nut CI307
263ML* 0.01mm Lock Nut CI302

0 - 25mm
263mp* Plain CI297
V263MRL* 0.001mm Ratchet Stop, Lock Nut CI322
263L 0 - 1” 0.001” Lock Nut CI252 The 78 Series feature extended travel, reducing • Resolution 0.005mm (.0002”).
* 0 - 25mm models specify clamping diameter 12 or 12.7mm. 12.7mm sent unless otherwise ordered. the need to exchange anvils. The ground • 3-Point contact with carbide measuring
contact points seat the internal micrometer faces on all 3-point heads above 12.5mm
faster and more accurately than the spherical (1/2”).
63 SERIES - LONG RANGE contacts found in other gauges. • Ratchet stop ensures consistent
measurements.
MICROMETER heads • Self-centering contacts for true readings.
Cat No Range No of Heads No of Rings Item No

S78MXTCZ 6 - 10mm 2 1 BN6871
S78MXTDZ 10 - 20mm 3 2 BN6872
• Ring type lock nut for quick and sure • With combination ratchet and speeder for S78MXTEZ 20 - 50mm 3 2 BN6873
locking. uniform pressure and quicker adjustment. S78MXTFZ 50 - 100mm 3 2 BN6874
S78XTCZ 1/4 - 3/8” 2 1 BN6880
S78XTDZ 3/8 - 3/4” 3 2 BN6881
63MRL* 0 - 50mm 0.01mm BM477
Ratchet Stop, Lock Nut S78XTEZ 3/4 - 2” 3 2 BN6882
63RL 0 - 2” 0.001” BM452
* 0 - 25mm models specify clamping diameter 12 or 12.7mm. 12.7mm sent unless otherwise ordered. S78XTFZ 2 - 4” 3 2 BN6883
13
inside micrometers & BORE Gauges
823 SERIES - TUBULAR INSIDE 3089 series - bore gauge sets

MICROMETERS
3089M-181-160J
Measuring inside diameter

using convenient handle
823MAZ attached to the micrometer.
Starrett 823 Series Micrometers are highly • 140mm long, covenient handle included
useful tools for internal linear measurements on A and B micrometers may be clamped
such as measuring cylinders, rings, setting where it will provide correct balance and
calipers, comparing gauges and measuring reach.
parallel surfaces. • Interchangeable anvils on 13mm and
The extension rods are made of steel tubing, 25mm heads.
light in weight, yet extremely rigid. Rods are • Each rod is marked with length.
approximately 9.5mm (3/8”) diameter to meet • Tubular measuring rods are lightweight, yet
the requirements of mechanics who prefer this extremely rigid.
larger diameter. By removing the hardened • Both the adjustable anvils on rods and the
and ground anvil ends (end caps) of the head anvil are hardened and ground.
micrometer head, the rods may be attached • Lock nut included with 25mm heads.
to either or both ends of the micrometer as
preferred.
Cat No Range Graduation Movement Of Screw Description Item No

823MAZ 40 - 200mm With 6 Rods & Handle DN672
13mm
823MBZ 40 - 300mm 0.01mm With 8 Rods & Handle DN677
823MEZ 100 - 1000mm 25mm With 10 Rods DN682
823AZ 1.1/2 - 8” With 5 Rods & Handle DN642
1/2”
823BZ 1.1/2 - 12” 0.001” With 8 Rods & Handle DN647
823CZ 4 - 24” 1” With 7 Rods DN652
780 SERIES - 3 POINT ELECTRONIC digital

INTERNAL MICROMETERS with output
METRIC BORE GAUGE SET
Suitable for a wide range of bore • Carbide Tipped Anvil.

measurements. • Ergonomic design with non-slip insulating
grip.
• All anvils laser marked for easy selection.
Starrett 780 Series provide IP65 level of • Wide measurement range without • 0.01mm graduated dial.
protection against coolant, water and dirt in changing anvils.
hostile shop environments. In addition, they • Resolution to 0.001mm (0.00005”). Cat No Range Graduation Item No
offer extended travel, reducing the need to • Carbide measuring faces on sizes above 3089M-181-10J 6 - 10mm DR9396
exchange anvils. 12.5mm (1/2”) diameter.
The ground contact points seat the internal • Includes instant inch/mm conversion and 3089M-181-18J 10 - 18mm DR9399
micrometer faster and more accurately preset + and - functions. 3089M-181-35J 18 - 35mm DR9402
than the spherical contacts found in other • IP65 level of protection against coolant,
3089M-181-50J 35 - 50mm 0.01mm DR9405
gauges. water, dirt and dust.
These rugged and accurate internal • Includes an RS232 output port for data 3089M-181-160J 50 - 160mm DR9408
micrometers are available individually or in transmitting.
3089M-181-250J 160 - 250mm DR9411
sets from 6mm (1/4”) to 200mm (8”).
3089M-181-450J 250 - 450mm DR9414
Cat No Range Graduation No Of Heads No Of Rings Item No 3089Z-131-715J 0.7 - 1.5” DR9416
S780XTCZ 6 - 10mm / 1/4 - 3/8” 2 1 DM4460
0.003mm / 0.0001” 3089Z-131-1424J 1.4 - 2.4” 0.0005” DR9417
S780XTDZ 10 - 20mm / 3/8 - 3/4” DM4461
3089Z-131-26J 2 - 6” DR9418
S780XTEZ 20 - 50mm / 3/4 - 2” 3 DM4462
0.004mm / 0.00015” 2 S3089MZ-181-160J Metric Bore Gauge Set, Set Contains, 3089M-181-35J, 50J & 160J DR9415
S780XTFZ 50 - 100mm / 2 - 4” DM4463
Imperial Bore Gauge Set, Set Contains, 3089Z-131-715J, 1424J
S3089z-131-6j DR94185
S780XTGZ 100 - 200mm / 4 - 8” 0.006mm / 0.00025” 4 DM4464 & 26J
14
bore gauges & dial & electronic indicatorS
829 & 831 SERIES - SMALL HOLE GAUGES 3025 & 3081 series - dial indicators
3025-481
S829EZ - Full Ball S831EZ - Half Ball With Flat Bottom
These small hole gauges are well balanced • Hardened-ball measuring surface with two • Supplied with tolerance hands and bezel
tools, ideal for accurately measuring small -point contact. lock.
holes, slots, grooves and recesses in all kinds • Radius on each gauge is less than the • 3025 and 3081 Series Indicators supplied
of work. minimum diameter to be measured, which with long life jewel bearings.
Accurate measurements are obtained by provides the two-point contact necessary • All indicators supplied with lug backs.
slightly “rocking” these gauges in the hole for maximum accuracy.
to be measured. This will guarantee contact • Smooth, sensitive adjustment for better Dial Diameter: 57mm
at the true diameter. The final size is then feel, giving more accurate measurements. Cat No Range Graduation Dial Reading Item No
obtained by measuring over the ball contacts • The adjustment of the gauge beyond their
3025-481 10mm BJ275
with a micrometer. range is restricted by a safety stop that
prevents breakage. 3025-481/5 5mm 0.01mm 0 - 100 BJ276
3025-681 20mm BJ2765
Cat No Description Range Length Item No
3025-257J 1mm 0.001mm 0 - 200 BJ230
3.2 - 5.1mm / 0.125 - 0.200” 75mm / 2.7/8”
5.1 - 7.6mm / 0.200 - 0.300” 80mm / 3.1/8” Dial Diameter: 43mm

S829EZ Set of 4 in Case DO242 Cat No Range Graduation Dial Reading Item No
7.6 - 10.2mm / 0.300 - 0.400” 85mm / 3.3/8”
3081-481/5 5mm 0.01 mm 0 - 100 BO022
10.2 - 12.7mm / 0.400 - 0.500” 90mm / 3.1/2”
3.2 - 5.1mm / 0.125 - 0.200” 70mm / 2.13/16”
5.1 - 7.6mm / 0.200 - 0.300” 80mm / 3.1/8”

S831EZ Set of 4 in Case DO497
7.6 - 10.2mm / 0.300 - 0.400” 85mm / 3.3/8”
10.2 - 12.7mm / 0.400 - 0.500” 90mm / 3.1/2”

3600 series - electronic digital
indicators
579 SERIES - TELESCOPING GAUGES
3600 Series Electronic Indicators have • Large easy to read LCD display.
simple, powerful, easy-to-use functions, all at • AGD group 2 size.
an attractive price. Versions are available for • Range: 12.7mm or 0.500”
metric/inch and metric only. • Reverse travel (± control indicates
direction.
Cat No Description Range Handle Length Item No • Zero setting at any position.
• 9.5mm diameter stem for mm/inch model
8 - 13mm / 5/16 - 1/2”
(8mm on metric only model).
13 - 19mm / 1/2 - 3/4” • Lug-on-centre-back + additional flat back.
S579GZ Set of 4 in Case 60mm / 2.3/8” DC902
19 - 32mm / 3/4 - 1.1/4” • Dust cap.
• Long battery life.
32 - 54mm / 1.1/4 - 2.1/8”
One of each of S579GZ plus two below Cat No Range Graduation Item No
S579HZ Set of 6 in Case 54 - 89mm / 2.1/8 - 3.1/2” 60mm / 2.3/8” DC907 3600M-5 12.5mm 0.01mm DR90524
89 - 150mm / 3.1/2 - 6” 82mm / 3.1/4” 3600-5 12.5mm / 0.5” 0.01mm / 0.0005” DR90523
15
dial & electronic indicators
2700 SERIES - WISDOM® PLUS 196 series - UNIVERSAL BACK-PLUNGER

ELECTRONIC digital INDICATORS DIAL INDICATORS
F2710-0M
This is our most versatile line of electronic • Preset mode to install any reading at any
indicators, available in three styles, in addition point in the display. Reading is retained Starrett 196 Series Indicators is one of the Then the contact should be brought against
to a remote display and accompanying probe even if the indicator is turned off. most versatile indicators available. Over the work with enough pressure to give the
series. • T.I.R.: Displays the difference between the the years, this tool has been improved by hand one full turn. Set the hand at zero by
All indicators feature a glass scale design highest and lowest values reached. methods and materials but, the basic design rotating the dial with the knurled bezel. This
with an unsurpassed accuracy of ± two • Tolerancing: Permits the entering of high is unchanged. The design has withstood the provides one full rotation of the hand both
resolutions when measuring from a known and low tolerances. When tolerances are test of time and beaten all competition. to the right and left of zero, showing a rise
standard. exceeded, the display will flash. Numbers While there is a need for indicators with finer or drop in the work and the amount of that
All have rugged, sealed enclosures as well. are retained even if the indicator is turned graduations, this indicator with graduations variation.
off. to 0.02mm and 0.001” will handle by far the
• Minimum reading hold. majority of jobs. Shank diameter is 6.35mm • Accurate and reliable.
• Hold button to freeze display: Displays and (1/4”). Antimagnetic models are also available • Simple to operate.
holds the reading after the measurement in series numbers 196A6Z and 196B6. • Rugged with few moving parts.
has been taken. For full use, the operator first chooses the • Smooth in operation.
• Feature Lock: Unique feature locks user proper contact from the three hardened • Inexpensive - the best indicator value you
selections so that a wrong button push will contact points that come with each model. can buy.
not change your settings.
Cat No Graduation Range Dial Reading Description Item No
Cat No Range Resolution No Of Resolutions Available Item No
Indicator With 3 Contact
F2710-0M 6mm / 0.250” 0.001mm / 0.00005” 10 DR891652 196MA1Z Points, Adaptor, 4 BW792
0 - 100 Attachments*, In Case
F2720-1M 0.002mm / 0.0001” 6 DR891675
15mm / 0.600” (Yellow Dial)
F2720-3M 0.01mm / 0.0005” 4 DR891678 Indicator With 3 Contact
196MB1 BW827
Points and Adaptor Only
F2730-0M 25mm / 1” 0.001mm / 0.00005” 8 DR891697 0.02mm 5mm
196MA5Z Points, Adaptor 196R, 4 BW794
Attachments*, In Case
dial test indicators 0 - 50 - 0
(Yellow Dial)
196MB5 BW832

196A1Z Points, Adaptor, 4 BW762

196B1 BW797
0 - 100
Antimagnetic Indicator
196A6Z With 3 Contact Points, 4 bw782
0.001” 0.200”
Antimagnetic Indicator With
Designed to be positioned for easy and • Dial Test Indicators meet or exceed 196B6
3 Contact Points Only
bw817
accurate readability the versatility of the angle DIN Standard.
head, combined with the square mounts • Reversible contact point direction for Indicator With 3 Contact
eliminates the need for having both vertical versatility. 196A5Z Points, Adaptor, 4 bw777
and horizontal style test indicators. • Precision, gear driven design with smooth, Attachments*, In Case
0 - 50 - 0
jeweled movement. Indicator With 3 Contact
• For extreme accuracy we recommend 196B5 bw812
positioning the lever contact so that it is
approximately 15° from being horizontal * Attachments include Clamp, Tool Post Holder, Snug & Hole Attachment. For more detailed information, see Catalogue 31B.
with the workpiece.

Cat No Range Graduation Dial Reading Accessories Item No
3808MA 2 Standards DR90585
0.2mm 0.002mm 0 - 100 - 0
3808MAC 6 Standards DR90586
3809MA 2 Standards DR9059

0.8mm 0.01mm 0 - 40 - 0
3809MAC 6 Standards DR90596
16
dial gauge stands
magnetic base indicator holders 665 Series - DIAL GAUGE STAND
3657aa With Fine

Adjustment
C
B
3657MTW Flex-O-Post
Indicator Holder
This is the most versatile dial indicator holder long gauge-holding rod (C). The base post
with an extremely stable base (A) that is can be conveniently located anywhere along
215mm (8.1/2”) long x 57mm (2.1/4”) wide the 215mm (8.1/2”) T-slot in the base.
at the bottom. It can inspect workpieces on
the top surface of the ground base or within Please note that the indicator is sold
a working area defined by the 200mm (8”) seperately.
660 With Triple Jointed upright base post (B) and the 238mm (9.1/2”)
Arm & Fine Adjustment
Cat No Length of Base Height Total Gauge Holding Rod Length Item No
665Z 215mm 200mm 238mm DH180
653 series - dial GAUGE STAND

with cast iron base
661A Mini Magnetic Base &
Indicator Holder
Starrett Magnetic Base Indicator Holders are The new Starrett 661A Mini Magnetic Base
for use with all Starrett Test, Back Plunger, and Indicator Holder is ideal when using a
AGD, Dial and Miniature-Dial Indicators. Also dial test indicator or universal indicator.
accommodates similar indicators of other Simple moveability for set up and adjusting.
manufacturers.
The Starrett 3657MTW is supplied complete • Very sensitive fine-adjustment thumb screw
with the flexible post, assembled of short on 3657AA and 660.
tubular steel sections and precision ball • 660 Series - Small but, powerful magnetic
joints, linked by an internal steel cable. It can base, with 70lbs holding force.
be adjusted to any position and locked by • 660 Series - Articulating arm with powerful
turning a lever near the magnetic base. central locking knob, provides full 360°
The Starrett 660 Series Magnetic Base horizontal positioning and over 180°
Indicator Holder with Triple-Jointed Arm is vertical positioning. This bench type comparator is ruggedly built The hand lifting lever on the indicator raises
compact and versatile and comes complete • 661 Series - NEW DESIGN. Universal for in-process and final inspection work. the spindle and releases it to contact the
with three adjustable pivots controlled mechanical device and extension stem. The dial indicator can be adjusted vertically work.
by a single knob for fast, easy indicator • 661 Series - Simple to use. and locked in any position. A sliding ring Vertical capacity 235mm (9.1/4”) and throat
positioning. with locking screw below the beam permits depth of 125mm (5”) and a vertical indicator
swinging the indicator to either side. The ring fine adjustment of up to 12.7mm (1/2”).
Cat No Dimensions Height Total Column Item No also acts as a safety device, preventing the
3657AA 63 x 55 x 50mm 230mm Standard DJ600 beam from accidentally dropping. Please note that the indicator is sold
There is a fine adjustment on the beam for seperately.
380mm Vertical Reach final indicator setting.
3657MTW 250mm Flexible Post DG752
250mm Horizontal Reach
660 40 x 35 x 30mm 190mm 3 Adjustable Pivots DG912 Cat No Description Item No
661A 30mm Base Diameter 103mm Mini Standard DG915 653 Comparator With Cast Iron Base, Without Indicator DF687
17
precision squares, combination sets & steel rules
3020 & 60 Series - precision steel combination sets

squares
With Base
3020-6
• Stainless steel base and blade. A complete substitute for a whole set of lock bolts, scriber, spirit level in both square
• Blade and base are hardened, ground common solid try squares, a 45 degree mitre, head and protractor head, direct reading
and lapped. a depth gauge, a height gauge, a marking double 180° protractor scale, and a hardened
or scribing gauge, a level, a plumb and by steel, machine-divided blade.
Cat No Specifications Accuracy Item No
withdrawing the blade, it can also be used as Forged and hardened heads and centre
3020M-75 75mm DR93580 a precision rule. heads, cast iron protractor head with smooth,
3020M-100
The Starrett 435 Series Combination Squares black enamel finish.
100mm 0.005mm per DR93581
are the very best sets available, with reversible
3020M-150 150mm 150mm of blade DR93582
Cat No Range Graduation Blade Item No
3020M-300 300mm DR93583
9m-300 300mm mm & 1/2mm BH047
S3020MZ Set Of 4 (One Of Each Size Listed Above) DR93590
9m-600 600mm Both Sides BH057
3020-3 3” DR93555
9ME-300 300mm / 11.3/4” BH052
3020-4 4” 0.0002” per DR93556
9ME-600 600mm / 23.1/2” 1/2mm & 32nds One Side BH062
3020-6 6” 6” of blade DR93557 Regular
435ME-300 300mm / 11.3/4” mm & 64ths Reverse Side CQ842
3020-12 12” DR93560
435ME-600 600mm / 23.1/2” CQ847
435-12-4R 12” 8ths, 16ths, Quick Reading, CQ812

Plain - Without Base 435-24-4r 24” 32nds, 64ths CQ852
635 Series - steel rules

60F-200
• Stainless steel blade.

• Blade is hardened, ground and lapped.

Spring Tempered With MM Graduations
60F-75 75 x 50mm BM1450
Cat No Length Width x Thickness Graduation Item No
60F-100 100 x 70mm 0.005mm per BM1452
150mm of blade C635-150 150mm 19 x 1.2mm DE607
60F-150 150 x 100mm BM1454
C635-300 300mm 25.4 x 1.2mm DE612
60F-200 200 x 130mm BM1456 mm & 1/2mm Both Sides
C635-500 500mm 29 x 1.2mm DE617
C635-1000 1000mm 32 x 1.2mm DE622
Bevel - Without Base
636 Series - steel rules

60B-200
• Stainless steel blade.

• Blade is hardened, ground and lapped.
Spring Tempered With MM/Inch Graduations
60B-50 50 x 40mm BM1400 Cat No Length Width x Thickness Graduation Item No
60B-75 75 x 50mm BM1402 C636ME-150 150mm / 5.3/4” 19 x 1.2mm DE731
0.005mm per 150mm
60B-100 100 x 70mm BM1404 C636-300 300mm / 11.3/4” 25.4 x 1.2mm 32nds & 1/2mm On One Side DE737
of blade
60B-150 150 x 100mm BM1406 C636-500 500mm / 19.1/2” 29 x 1.2mm 64ths & mm On Reverse DE742
60B-200 200 x 130mm BM1408 C636-1000 1000mm / 39.1/4” 32 x 1.2mm DE747
18
thickness gauges
3015 series - thickness gauge 66, 173 & 467 Series -

thickness gauges
3015MA
Cat No Range (mm) No of Leaves Size of Leaves Item No

After inserting work between the measuring • Indicators have jewel bearings and
0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35,
contacts, releasing the lever will cause continuous dials. 66MA 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 20 12.7 x 77mm BM607
the spindle to contact the work, giving an 0.75, 0.80, 0.85, 0.90, 0.95, 1.00
accurate size reading because measuring
pressure is independent of the user. 173MAT 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 12.7-7 x 77mm BU762
173MCT 0.10, 0.15, 0.20, 0.30, 0.40, 0.50 12.7-7 x 152mm BU767
13
Cat No Range Graduation Throat Depth Item No 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15,
467M 12.7 x 114mm CX577
3015MA 0 - 10mm 0.01mm 63mm DP634 0.20, 0.30, 1.00, 2.00, 3.00, 5.00
3015A 0 - 0.5” 0.001” 2.1/2” DP6335 Note:

66MA and 467M Series - MM Reading 173 Series - MM Reading Thickness Gauges
Thickness Gauges With Straight Leaves. With Tapered Leaves.
269 series - taper gauges

245 SERIES - engineers’ combination
taper, wire & thickness gauge
These gauges are for determining hole sizes Made of tempered steel with a locking device
in dies and all kinds of other work. They read for fixing any leaf in position for use.
in 0.02mm or thousandths of an inch.
Consisting of a wire gauge, a taper gauge Series 245 has a taper gauge leaf for Cat No Range Graduation Length No of Leaves Item No
for measuring slot widths, and an assortment measuring slot widths from 1/64” - 3/16” in
of thickness gauge leaves all folding within a 64ths of an inch, the reverse side having a 3” 269MA 2 - 12mm 64mm 10 CI802
0.02mm
compact steel case. The gauge measures scale graduated in 8ths and 16ths. It has nine 269MB 12 - 25mm 70mm 13 CI807
12.7mm wide x 120mm long (1/2” x 4.3/4”) thickness or feeler leaves as follows:
269A 0.100 - 0.500” 2.1/2” 8 CI792
and has a locking device to lock any leaf or 0.002”, 0.003”, 0.004”, 0.006”, 0.008”, 0.010”, 0.001”
leaves in position. 0.012”, 0.015” and 1/16”. 269B 0.500 - 1” 2.3/4” 10 CI797
Series 245M has a taper gauge leaf for
measuring slot widths from 0.5 - 5mm in
0.5mm, the reverse side having an 80mm
scale graduated in mm and 1/2mm. It has
270 series - taper gauge
eleven thickness or feeler leaves as follows:
0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15, 0.20,
0.30, 1 and 2mm.
Cat No Description Item No

With Taper Gauge, English Standard Wire Gauge and 11mm
245M CD957
Reading Thickness Gauge Leaves
The 270 Series Taper Gauge is a very useful length for quick and convenient measuring of
With Taper Gauge, English Standard Wire Gauge and 9 inch tool, especially for bearing work and for slot widths, etc.
245 CD952
Reading Thickness Gauge Leaves gauging slots. One side is graduated from 0.010” to 0.150”
The gauge is made of quality tool steel 11mm in thousandths of an inch and the reverse
(7/16”) wide by 160mm (6.1/4”) long and side from 0.3mm to 4mm in one-twentieth of
is accurately tapered throughout its entire a mm (0.05mm).

270 0.3 - 4mm / 0.010 - 0.150” 0.05mm / 0.001” CI913
19
feeler gauge stock
667 series - THICKNESS GAUGE 666 SERIES - FEELER STOCK

“FEELER STOCK” ROLL IN DISPENSER
Metric gauges 300mm long. Inch gauges 12” long.
Cat No Thickness Item No

Metric rolls 7.6M length. Imperial rolls 25’ length.
667M-3 0.03mm DH812
667M-4 0.04mm DH817 Cat No Thickness Item No
667M-5 0.05mm DH822 666M-3 0.03mm DH467
667M-6 0.06mm DH827 666M-4 0.04mm DH472
667M-8 0.08mm DH837
666M-5 0.05mm DH477
667M-10 0.10mm DH842
666M-6 0.06mm DH482
667M-15 0.15mm DH847
666M-8 0.08mm DH492
667M-20 0.20mm DH852
666M-10 0.10mm DH497
667M-25 0.25mm DH857
667M-30 0.30mm DH862 666M-15 0.15mm DH502
667M-35 0.35mm DH867 666M-20 0.20mm DH507
667M-40 0.40mm DH872 666M-25 0.25mm DH512

667M-45 0.45mm DH877 666M-30 0.30mm DH517
667M-50 0.50mm DH882 666M-35 0.35mm DH522
667-1/2 0.0005” DH637
666M-40 0.40mm DH527
667-1 0.001” DH642
666M-45 0.45mm DH532
667-1.1/2 0.0015” DH647
666M-50 0.50mm DH537
667-2 0.002” DH652
666-1 0.001” DH232
667-2.1/2 0.0025” DH657
667-3 0.003” DH662 666-1.1/2 0.0015” DH337
667-4 0.004” DH667 666-2 0.002” DH342
667-5 0.005” DH672 666-2.1/2 0.0025” DH347

667-6 0.006” DH677 666-3 0.003” DH352
667-7 0.007” DH682 666-4 0.004” DH357
667-8 0.008” DH687 666-5 0.005” DH362
667-9 0.009” DH692
666-6 0.006” DH367
667-10 0.010” DH697
666-7 0.007” DH372
667-11 0.011” DH702
666-8 0.008” DH377
667-12 0.012” DH707
666-9 0.009” DH382
667-13 0.013” DH712
667-14 0.014” DH717 666-10 0.010” DH387
667-15 0.015” DH722 666-11 0.011” DH392
667-16 0.016” DH727 666-12 0.012” DH397

667-17 0.017” DH732 666-13 0.013” DH402
667-18 0.018” DH737 666-14 0.014” DH407
667-19 0.019” DH742
666-15 0.015” DH412
667-20 0.020” DH747
666-16 0.016” DH417
667-21 0.021” DH752
666-17 0.017” DH422
667-22 0.022” DH757
666-18 0.018” DH427
667-23 0.023” DH762
666-19 0.019” DH432
667-24 0.024” DH767
666-20 0.020” DH437
667-25 0.025” DH772
666-21 0.021” DH442
667-26 0.026” DH777
667-27 0.027” DH782 666-22 0.022” DH447
667-28 0.028” DH787 666-23 0.023” DH452
667-29 0.029” DH792 666-24 0.024” DH457

667-30 0.030” DH797 666-25 0.025” DH462
20
thread gauges, radius gauges & spring calipers
SCREW PITCH GAUGES 167 & 272 SERIES - RADIUS GAUGES
S167MCHZ 272MA
Quickly determine the pitch of various threads, ends, each leaf having teeth corresponding
these gauges consist of a substantial steel to a definite pitch, marked on each leaf.
case with a number of folding leaves at both
International Metric Standard - 60° Threads Radii or fillets can be checked or laid out 272 Series - An external and internal radius on
Cat No Range of Pitches No of Leaves Pitches In MM Item No easier, faster and more accurately with Starrett each leaf permits both concave and convex
167 Series Radius Gauges. They are available surfaces to be measured. The leaves are
0.25,0.30,0.35,0.40,0.45,0.50,0.55,0.60,0.65,
individually and in sets. Each set is furnished specially shaped for use in any position at any
156M 0.25 - 2.50mm 0.70,0.75,0.80,0.85,0.90,1,1.10,1.20,1.25,1.30, BT072
1.40,1.50,1.60,1.70,1.75,1.80,1.90,2,2.50 in an attractive case which provides complete angle to measure fillets and radii in corners or
28 protection and easy, instant selection of the against shoulders. Each leaf is stamped with
0.5,0.75,1,1.10,1.25,1.50,1.75,2,2.50,3,3.50,4, right gauge size for the job. a radius size and has an eccentric mounting
159M 0.5 - 11.5mm 4.50,5,5.50,6,6.50,7,7.50,8,8.50,9,9.50,10, BT282
10.50,11,11.50 for clearance between the leaf and the case
when opened.
Whitworth Standard - 55° Threads Cat No Radii Range Increments No of Leaves Item No
S167MCHZ 0.5 - 15mm 0.5mm - 1mm 22 BU402
Cat No TPI Range No of Leaves Threads Per Inch (TPI) Item No
3.1/2,4,4.1/2,5,6,7,8,9,10,11,12,13,14,16,18, 272MA 0.75 - 5mm 0.25mm 18 CJ142
476 3.1/2 - 60 30 CY592
19,20,22,24,25,26,28,30,32,36,40,44,48,50,60
272MB 5.5 - 13mm 0.5mm 16 CJ147
American National - 60° Threads 73, 79 & 83 Series - spring-Type

Cat No TPI Range No of Leaves Threads Per Inch (TPI) Item No dividers & calipers
2.1/4,2.3/8,2.1/2,2.5/8,2.3/4,2.7/8,3,3.1/4,
155 2.1/4 - 28 27 3.1/2,4,4.1/2,5,5.1/2,6,7,8,9,10,11,12,13,14, BS967
16,18,20,24,28
4,4.1/2,5,5.1/2,6,7,8,9,10,11,11.1/2,12,13,14,
6 4 - 42 30 15,16,18,20,22,24,26,27,28,30,32,34,36, BG802
38,40,42
4,4.1/2,5,6,7,8,9,10,11,11.1/2,12,13,14,16,
474 4 - 80 28 CY382
18,20,24,27,28,32,36,40,44,48,56,64,72,80
First Corner 17 Leaves:
4,4.1/2,5,5.1/2,6,7,
8,9,10,11,11.1/2,12,13,14,15,16,18
Second Corner 17 Leaves:
472 4 - 84 51 20,22,24,26,27,28,30,32,34,36,38,40,42, CY172
44,46,48,50 73B-6 83B-6
Third Corner 17 Leaves:
52,54,56,58,60,62,64,66,68,70,72,74,76,78, 79B-6
Quick adjusting spring
80,82,84
nut makes fast, accurate
settings.
Cat No Size and Approx. Capacity Type Item No

83B-4 100mm / 4” BO298
83B-6 150mm / 6” Spring Divider BO303

With Quick Adjusting
83B-8 200mm / 8” Spring Nut BO307
83B-12 300mm / 12” BO317
79B-4 100mm / 4” BN718
79B-6 150mm / 6” Outside Spring Caliper BN723

79B-8 200mm / 8” Spring Nut BN727
79B-12 300mm / 12” BN737
73B-4 100mm / 4” BN198
73B-6 150mm / 6” Inside Spring Caliper BN203

73B-8 200mm / 8” Spring Nut BN207
73B-12 300mm / 12” BN217
21
protractors, angle meter, v-blocks & level
359 SERIES - UNIVERSAL BEVEL 3566 series - dual-vee magnetic

VERNIER PROTRACTOR v-block
3566
C359BZ
Starrett Magnetic V-Blocks are designed for • A powerful, permanent magnet is
versatility and accuracy. All working surfaces controlled by a rotary switch and provides
These tools are designed for precision • Satin chrome finish on all reading surfaces. are precision ground with typical Starrett sufficient holding power for positive
measuring and for laying out angles. The • Sharp, machine divided graduations. accuracy to provide convenient set-ups for location.
protractor is one of the most valuable and • Machine divided graduations read to 5 inspection and light machining.
useful tools for the kit of every good toolmaker, minutes (1/12 of a degree) and accuracy is
inspector or machinist. finer than can be read. Cat No Dimensions Capacity Type Item No
• The most convenient, ultra sensitive fine 3566 95 x 70 x 95mm 44mm Individual DB627
adjustment for precision setting.
Cat No Length Graduation Item No

C359DZ 300mm / 12” 5 min. or 1/12 degree CN282
v-blocks & clamps
19 & 183 series - steel protractors
C183
C19
278
Starrett C19 and C183 Steel Protractors are • Double graduations from 0 -180° in
highly useful and accurate tools for setting opposite directions permitting the direct Starrett No. 278 V-Blocks are precision • Blocks are made of steel, hardened and
bevels, transferring angles, small squaring reading of angles and supplementary ground to extreme accuracy. The vees are ground and numbered in series so that the
tasks, checking cutter clearances within angles. central, parallel and square with the ends and vees in each set are always in alignment.
certain limits and many other applications. • The back of the tool is flat for ease of use. sides.
C183 Series has a rectangular head, thus • The blade can be locked firmly at any
providing four convenient working edges. angle by the lock nut. Cat No Dimensions Range Type Item No
• Satin chrome finish for ease of reading and
278 40 x 32 x 32mm 25mm / 1” Pair CJ612
resistance to rust.
568C 75 x 63 x 50mm 50mm / 2” Pair DB952
Cat No Blade Length Range Head Type Item No
578 133 x 86 x 75mm 100mm / 4” Individual DC770
C19 Semi-Circular BI572
150mm / 6” 0 - 180°
C183 Rectangular BV642
3097 series - precision level
AM-2 - angle meter
Starrett AM-2 Angle Meter offers a fast, easy • Large, readable scale for accurate Supplied In Aluminium Case
and inexpensive way to measure angles. readings from 0-90° in any quadrant.
• Magnetic base frees hands when used on
ferrous surfaces. • Main vials have seven graduations on each • Special alloy iron used to obtain freedom
• Measures any angle for pitch or slope. side of the bubble. from thermal effects.
• Handy rise, run, angle and pitch • Auxiliary level vial shows lateral position • One division equals 0.02mm/M or
information on back of tool. and assists in horizontal setting. (0.0005”) of an inch per foot.
Cat No Dimensions Item No Cat No Length Item No

AM-2 125 x 125mm DS0002 3097Z 200mm DR90520
22
levels & parallels
130 series - BENCH level 384 SERIES - STEEL PARALLELS
A very handy, compact bench level with a with black wrinkle finish and an accurately
sensitive and highly accurate single vial. machined base levelling surface.
The body is made of seasoned cast iron
Cat No Size Description Item No

130 85mm / 3.3/8” With Main Vial BR847
98 series - machinists’ levels
98-6
These levels have ground and graduated • The base of the levels features an involute
main vials. All sizes have a cross test vial groove running the length of the base,
except for the 100mm (4”) model. The 300mm which provides a reliable seat for round
(12”) has a plumb vial and the 450mm (18”) work such as pipes or shafting. Starrett 384 Series Steel Parallels are they are made from a special grade of tool
has a double plumb vial. hardened and ground to close limits. They steel, hardened and accurately ground on the
are indispensable for inspection and layout four sides. In tool rooms or machine shops,
Cat No Size Description Item No work or for various setups on drill presses, several pairs of these parallels will be of great
milling and grinding machines, shapers, value.
98-4 100mm / 4” Without Cross Test Vial BP422
etc. Furnished in pairs, 150mm (6”) length,
98-6 150mm / 6” BP427
With Cross Test Vial
98-8 200mm / 8” BP432
Cat No (Pair) Thickness Width Item No
98-12 300mm / 12” With Single Plumb Vial and Cross Test Vial bp437
384A 1/8” (3mm) 1” (25mm) CO662
98-18 450mm / 18” With Double Plumb Vial and Cross Test Vial bp447
384C 3/16” (5mm) 7/8” (22mm) CO672
154 SERIES - ADJUSTABLE PARALLELS 384E

1/4” (6mm)
3/4” (19mm) CO684
384F 1” (25mm) CO687
384G 1/2” (13mm) CO694

3/8” (10mm)
384H 3/4” (19mm) CO697
384M 3/8” (10mm) CO700
384N 1/4” (6mm) 1/2” (13mm) CO7001
384P 5/8” (16mm) CO7002
384R 3/8” (10mm) 1” (25mm) CO7003
384S 5/8” (16mm) CO7004

Starrett adjustable parallels provide a wide also convenient for use in machine vises for 384T CO7005
3/4” (19mm)
range of use in layout, gauging, inspection levelling or adjusting work on setups of milling
work and for setups on various machine tools. and grinding machines, shapers, planers, drill 384W 1/2” (13mm) 1” (25mm) CO7006
Their adjustable feature makes it possible presses and for many other applications. 384X 1.1/8” (28mm) CO7007
to adjust them to exact size by micrometer Parallels slide smoothly and can be easily
measurement and also permits use in adjusted. The smaller sizes A, B and C are 384Y 1.1/4” (31mm) CO7008
place of several solid-type parallels. These locked by one screw while the larger sizes, D, S384JZ Set Of 4 Pairs - Sizes A, C, E, G - In Case CO702
parallels are useful as gauges in checking E and F have two locks screws.
S384-1Z Set Of 4 Pairs - Sizes N, M, P, F - In Case CO707
the size of slots and openings. They are All parallels are 7mm (9/32”) thick.
S384-2Z Set Of 4 Pairs - Sizes G, H, R, M - In Case CO712
Cat No Range Length Item No S384-3Z Set Of 5 Pairs - Sizes S, T, W, X, Y - In Case CO713
154A 9.5mm - 12.7mm / 3/8” - 1/2” 45mm / 1.3/4” BS827
154B 12.7mm - 17.5mm / 1/2” - 11/16” 55mm / 2.1/8” BS832
154C 17.5mm - 24mm / 11/16” - 15/16” 70mm / 2.11/16” BS837
154D 24mm - 33mm / 15/16” - 1.5/16” 90mm / 3.9/16” BS842
154E 33 - 44mm / 1.5/16” - 1.3/4” 105mm / 4.3/16” BS847
154F 44 - 57mm / 1.3/4” - 2.1/4” 130mm / 5.1/16” BS852
S154SZ Set Of 4 Parallels - Sizes A, B, C, D - In Case BS862
S154LZ Set Of 6 Parallels - Sizes A, B, C, D, E, F - In Case BS857
23
punches
18 Series - automatic centre punches 248 series - long range drive pin
with adjustable stroke punches
18A
Rugged automatic punches have all-steel when downward pressure is applied.

handles and parts. These punches have a No hammer is required, making one hand
mechanism that automatically strikes a blow always free to steady the work.
Cat No Length Diameter Description Item No

18AA 100mm / 4” 11mm / 7/16” Punch BI447
Starrett Long Range Drive Pin Punches are tempered and have a knurled grip.
18A 125mm / 5” 14mm / 9/16” Punch BI452 extra-long, measuring 200mm (8”). The Designed to withstand hard use and provide
18C 130mm / 5.1/4” 17mm / 11/16” Heavy Duty Punch BI462
bodies are 115mm (4.1/2”) and the drive a most satisfactory punch for machine shop
pin sections are 90mm (3.1/2”) long. They and motor service work.
are well-proportioned, hardened, properly
117 SERIES - Centre PUNCHES
Cat No Length Diameter Punch Item No
248A 1/8” (3mm) CE332
248B 3/16” (5mm) CE337
248C 200mm / 8” 1/4” (6mm) CE342
248D 5/16” (8mm) CE347
248E 3/8” (9.5mm) CE352
S248PC Set of 5 Punches (1 of each size) in Protective Vinyl Case CE362
These centre punches are made of specially tempered. They are well proportioned, nicely
selected steel, hardened and properly finished and have a knurled finger grip.
Cat No Length Diameter At Top Of Tapered Pt Item No

117AA 75mm / 3” 1.5mm / 1/16” BQ592 B565 SERIES - BRASS DRIVE PIN PUNCHES
117A 2mm / 5/64” BQ597
117B 2.5mm / 3/32” BQ602

100mm / 4”
117C 3mm / 1/8” BQ607
117D 4mm / 5/32” BQ612
117E 125mm / 5” 6.5mm / 1/4” BQ617
S117PC Set Of 5 Punches - 117AA, A, B, C, D In Protective Case BQ627 SB565Z
565 SERIES - DRIVE PIN PUNCHES

Starrett regular punches, made of hardened, Ideal for softer material as the punches are
tempered steel able to withstand heavy duty much softer than the steel version.
work are occassionally too hard and can A good approach is to use a brass punch
damage softer materials. to gently produce the initial movement of
Hence, the introduction of our new brass delicate work then, finish the job with a steel
punches. punch.
S565WB
Cat No Length Diameter Punch Item No
Starrett 565 Series Drive Pin Punches are well grip. Each punch has the size stamped on B565A 1/16” (1.5mm) DB5230
proportioned, hardened, properly tempered, the head. B565B 3/32” (2.5mm) DB5231
nicely finished and have a knurled finger
B565C 1/8” (3mm) DB5232
Cat No Length Diameter Punch Item No B565D 5/32” (4mm) DB5233
565A 1/16” (1.5mm) DB477 4” (100mm)
B565E 3/16” (5mm) DB5234
565B 3/32” (2.5mm) DB482
B565F 7/32” (5.5mm) DB5235
565C 1/8” (3mm) DB487
B565G 1/4” (6mm) DB5236
565D 5/32” (4mm) DB492
4” (100mm) B565H 5/16” (8mm) DB5237
565E 3/16” (5mm) DB497
SB565Z Set of 8 Punches (1 of each size) in Protective Durable Fabric Pouch DB5238
565F 7/32” (5.5mm) DB502
565G 1/4” (6mm) DB507
565H 5/16” (8mm) DB512
S565WB Set of 8 Punches (1 of each size) in Red Round Plastic Box DB517
24
pIN VISES, TAP WRENCHES, SCRIBERS, EDGE FINDERS & CENTRE FINDERS
162 series - pin vises 827 series - edge finders

827MA
827MB
Work surfaces may be located easily, quickly located with this handy tool. Body and
and accurately with these edge finders. Work contacts are made of tool steel, hardened,
Pin vise handles are reduced in size so that and finger when filing small work.
with flat, straight edges, shoulders, grooves, ground and lapped to close tolerances for
they can be rapidly rotated between thumb
round work, studs, dowels or centre points diameter and concentricity.
and scribed lines - all can be accurately
Cat No Range Item No
162A 0 - 1mm / 0 - 0.040” BT622 How To Use:
162B 0.8 - 1.6mm / 0.030” - 0.062” BT627 Edge finders are easy to use. They are operations relative to the edge.
placed in a collet or chuck. The worktable is For locating centre points and scribed lines,
162C 1.3 - 3.2mm / 0.050” - 0.125” BT632 then traversed to obtain contact between the the pointed contact is used by putting a pencil
162D 2.9 - 4.8mm / 0.115” - 0.187” BT637 rotating edge finder and the work. Contact or rule against the centre point and making it
will shift to concentric position relative to run concentrically. Then the point is brought
Set of All 4 Sizes in
S162Z BT647 the body and with very slight additional down to the centre point or intersection of
Protective Vinyl Case
table adjustment, will move off centre with a scribed lines and the table is adjusted so
decided wobble. At this point, the centre of that when the tool barely touches the work,
the finder is exactly one-half the diameter of the lineup with the point in question can be
93 SERIES - T-HANDLE TAP WRENCHES the contact from the work edge, permitting
accurate location for other machining
ascertained.
Collet Adaptor
This is a timesaving accessory for our 827 Series Edge Finders.
It allows for quick installation and removal of the edge finder,
93C eliminating the need for collet changes on Bridgeports and
similar machines.
It can also be used with any other attachment with a 9.5mm
(3/8”) post.
Starrett 93 Series T-Handle Tap Wrenches withstand ordinary shop use.

are for holding taps, drills, reamers and other All wrenches have a sliding handle that is
small tools to be turned by hand. The body is frictionally held. This feature permits the Cat No Description Body Diameter Contact Diameter Item No
centred, enabling the worker to use it on lathe handle to be removed entirely or positioned
827MA 10mm 6mm DN984
centres or on an upright drilling machine to so that leverage can be applied when working Single End
start the tap straight. The jaws conform to the in close quarters. 827A 0.375” 0.200” dn974
tool being held, making it rigid and less apt
827MB 10mm 6mm & Pointed Contact DN985
to loosen. They are properly heat treated to Double End
827B 0.500” 0.200” & Pointed Contact dn979
Cat No Tap Size Square Shank Body Length Item No
93A 1.6 - 4.7mm 1/16” - 3/16” 1.6 - 4mm 1/16” - 5/32” 50mm / 2” BP292
PT28314 Collet Adaptor PT28314
93B 5.5 - 11mm 7/32” - 7/16” 4 - 6.4mm 5/32” - 1/4” 65mm / 2.1/2” BP297
93C 6.4 - 12.7mm 1/4” - 1/2” 4.7 - 8mm 3/16” - 5/16” 90mm / 3.1/2” BP302
93D 1.6 - 4.7mm 1/16” - 3/16” 1.6 - 4mm 1/16” - 5/32” 150mm / 6” BP307 828 series - CENTRE FINDER SET
93E 5.5 - 11mm 7/32” - 7/16” 4 - 6.4mm 5/32” - 1/4” 250mm / 10” BP312
93F 6.4 - 12.7mm 1/4” - 1/2” 4.7 - 8mm 3/16” - 5/16” 330mm / 13” BP317
S828HZ
70 SERIES - POCKET SCRIBER
70A
Attachments are snapped in chuck without
The handle is of steel, knurled and nickel knurled chuck and when not in use can be removing collet nut and clamped by a ball
plated. The scriber point is steel, properly reversed, telescoped into the handle and swivel joint.
hardened and finely tapered so that the locked by the chuck. The hexagon-shaped
location of the point is not obscured. head prevents rolling.
The scriber is held firmly in the handle by a 828A Wiggler / Centre Finder With Pointed Shank DO103
828B Ball Contact Only (6.35mm / 0.250” Ball) DO109

Cat No Length Point Item No
828C Disc Contact Only (2.54mm / 0.100” Disc) DO113
70A 125mm BM937
Steel 828D Offset Indicator Holder Only DO118
70B 145mm BM942
PT09186 Pointed Shank Only 09186
70AX 125mm BM947
Carbide S828HZ Wiggler / Centre Finder, Complete With Case & 4 Attachments, DY659
70BX 145mm BM952 No. 828B, C, D & PT09186
25
gauge blocks, ACCESSORIES, Granite surface plates & STANDS
gauge block sets charcoal black granite surface plates
Our charcoal black granite has a high quartz gauges rusting while setting on the plates.
content which provides greater resistance to Chosen specifically to minimise thermal
Manufactured from high grade steel to ISO wear and damage than other black granite expansion.
3650 Grade 0 or Grade 1. All sets include plates. All surface plates include UKAS Calibration
UKAS Calibration Certificate. This material has low water absorbtion rates, Certificate.
thus minimising the possibility of precision
Cat No Set Configurations No of Blocks in Case Item No
47
3047.0 1.005, 1.01 to 1.19 by 0.01mm step, 1.2 to 1.9 by DV0620
Grade “0” No Ledge
0.1mm step, 1-10 by 1mm step,
20-100 by 10mm step 47
3047.1 DV0621 Flatness Unilateral Approx
Grade “1” Surface Size Thickness
Cat No Tolerance Wt Item No
88
3088.0 1.0005, 1.001 to1.009 by 0.001mm step, 1.01 to 1.49 DV0622 mm Inch mm Inch mm Inch (Kgs)
Grade “0”
by 0.01mm step, 0.5 to 9.5 by 0.5mm step, 10-100
by 10mm step. 88 3040-25 400 x 250 16” x 10” 25 DU7100
3088.1 DV0623 100 4” 0.0012 0.000050”
Grade “1”
3040-40 400 x 400 16” x 16” 39 DU7102
3063-40 630 x 400 25” x 16” 113 DU7104

120 5” 0.0019 0.000075”
3063-63 630 x 630 25” x 25” 150 DU7106
3100-63 1000 x 630 40” x 25” 0.0025 0.000100” 225 DU7108

160 6”
3100-100 1000 x 1000 40” x 40” 0.0038 0.000150” 338 DU7110
Rectangular gauge block 3160-100 1600 x 1000 64” x 40” 200 8” 0.0050 0.000200” 599 DU7112
accessories 3200-100 2000 x 1000 80” x 40” 240 10” 0.0063 0.000250” 937 DU7114
surface plate stands
No of Steel
Individual Accessories
Accessories Included
EDP
Cat No No
Description Set No. AC 11.MA
Steel Croblox®
Half-Round Jaw **
RA 101. 2 91464
5mm Radius
Straight Jaw ** 91465 (104) Surface Size Approx Weight Stationery Stand
RA 104. RA 204. 2* Cat No
5mm Thick 91469 (204) mm Inch (Kgs) Item No
Clamps SD3063-40 630 x 400 25” x 16” 23 DU804
0 - 38mm Capacity RA 5. 1 92800 sd3063-63 630 x 630 25” x 25” 29 DU806
Scriber Point RA 11. 1 91424
sd3200-100 2000 x 1000 80” x 40” 66 DU814
Centre Point, 2mm C/L RA 112. 1 91466
Base Block, 25mm Thick Ra 113. 1 91467
Case (CS 9111) DT383 1 92299
* Croblox® jaws available as an option at extra ** Jaws are normally used in pairs, but
cost. Please specify. are ordered individually. Please order
accordingly.
26
SPECIAL APPLICATIONs
682 series - saw tension gauge 7793 series - pocket laser

tachometer kit with case
The Pocket Laser Tachometer is a digital, is programmable in both inch and metric
battery operated portable optical tachometer rates. It has TTL compatible pulse output
that can operate up to 25 feet from a reflective to trigger devices such as data collectors or
target using a laser light source. stroboscopes.
The powerful 32 function Tachometer/ Ergonomic design makes measurement of
Ratemeter, Totaliser/Counter and Timer speed and RPM simple.
The Starrett Saw Tension Gauge will check on either band saws of any type, or power Range Accuracy Item
for proper blade tension in either English or hacksaws. Cat No
Optical (RPM) Contact (RPM) Optical Contact No
metric and is graduated both in pounds and It is graduated to read up to 60,000 PSI
kilograms. or 4,000kg per cm2 and is furnished with S7793Z 5 to 200,000 0.5 to 20,000 ±0.01% of Reading ±0.05% of Reading DM595
The tension gauge can be read directly instructions, including suggested tensions.

668 series - shaft alignment
682EMZ Saw Tension Gauge DK037 clamp sets
696 series - crankshaft distortion

dial/strain gauge A
F G
C
D
E S668 mounted on coupling.
The Starrett Shaft Alignment Clamp is • Lightweight clamp design made of black
designed for fast, precise alignment of anodized aluminium.
motors, pumps, compressors, etc. This • Rigid 9.5mm (3/8”) diameter stainless steel
An ideal gauge for checking bearing A comparison of readings taken at top and system is capable of addressing radial and indicator posts provided in three lengths.
alignment or shaft deflection without bottom positions indicates any misalignment angular misalignment problems and can be • Extension plate allows for added radial
dismantling the engine. Also useful as a of cylinder and frame which results in local set up within minutes. clearance.
strain gauge on engine frames. This inside over-stress and eventual cracking of the • Heavy duty roller chain can accommodate
measuring gauge checks the distortion of frame neck. Products in photo (Cat No.): A. Chain Clamp up to a 190mm (7-1/2”) diameter shaft.
crankshafts webs. This distortion bears a A special spring tension in the dial indicator, Only (668); B. Extension Plate Screw, Washer • Sets are available with either two Starrett
direct relation to existing misalignment or the gauge is self-sustaining in any position (PT99529); C. 125mm (5”) Post (PT27981); Nos.196MB5 or 81-181J Indicators.
excessive bearing wear. The gauge makes without sacrificing necessary rigidity, thus D. 186mm (7-7/16”) Post (657G); E. 225mm • Excess roller chain can be secured to the
it possible to check bearing alignment or leaving the operators hands free. The contact (9”) Post (PT27982); F. Snug Complete side of the chain clamp.
undue shaft deflection without dismantling points are conical, with an approximate 60° (PT18724); G. Indicator Attachment (657Y). • A second shaft alignment clamp can be
the engine. Used on all diesel engine shafts included angle, hardened and ground to mounted across from the first clamp to act
and the centre crankshafts on any type of a sharp point, and will stay in place on 45° as a vertical “target” for face alignment.
engine or compressor, the gauge can also be surfaces.
applied as a strain gauge on engine frames Cat No Description Item No
while the engine is operating.
1 each: Chain Clamp, Extension Plate, Posts 125mm (5”), 186mm (7-7/16”),
S668A DH897
225mm (9”), Without Case
2 each: Chain Clamp, Extension Plate, Posts 125mm (5”), 186mm (7-7/16”),
S668BZ DH898
696MZ 61 - 458mm 0.02mm DK147 225mm (9”), With Case
27
m1 rust inhibitor & lubricant, surface plate cleaner & instrument oil
M1 series - all purpose lubricant
All purpose lubricant which forms a unique • Protection against corrosion.

air tight coating that simultaneously dries as • Releases seized nuts and bolts.
it protects, unlike other lubricants which stay • Displaces moisture/non conductive.
“wet” and attract dirt. • Cleans and protects tools and gauges.
• Preventative maintenance.
• Cleans and polishes.
• Stops squeaks and lubricates.
• Protects marine equipment.

M1-6 200ml Aerosol Can DR918
M1-12 400ml Aerosol Can DR9215
granite surface plate cleaner
Allows surface plates and other precision particles.

granite products to be kept in perfect The liquid cleaner, which also acts as a
condition. All granite products should degreaser and rust inhibitor, should be used
be cleaned frequently, this helps prevent without water to minimise the risk of rusting
abrasion of tools by dirt and other foreign tools.
Cat No Capacity Item No

Granite Surface Plate Cleaner 1 Quart (2 Pint) Bottle DU923
Granite Surface Plate Cleaner 1 Gallon Bottle DU927
Waterless Surface Plate Cleaner 0.5 Kg Container DU947
1620 series - tool & instrument oil
For mechanics, homeowners, sportsmen... worldwide to lubricate and protect our

This oil is the same extra-fine lubricant made precision measuring tools and instruments.
to our specifications and used in our factories
Cat No Capacity Item No

1620 110ml DR712
28
REFERENCE TABLES
Decimals To Millimeters Millimeters To Inch Millimeters To Inch

Decimal mm Decimal mm mm Decimal mm Decimal mm Decimal mm Decimal
0.001 0.0254 0.500 12.7000 0.01 0.00039 0.64 0.02520 1 0.03937 64 2.51969
0.002 0.0508 0.510 12.9540 0.02 0.00079 0.65 0.02559 2 0.07874 65 2.55906
0.003 0.0762 0.520 13.2080 0.03 0.00118 0.66 0.02598 3 0.11811 66 2.59843
0.004 0.1016 0.530 13.4620 0.04 0.00157 0.67 0.02638 4 0.15748 67 2.63780
0.005 0.1270 0.540 13.7160 0.05 0.00197 0.68 0.02677 5 0.19685 68 2.67717
0.006 0.1524 0.550 13.9700 0.06 0.00236 0.69 0.02717 6 0.23622 69 2.71654
0.007 0.1778 0.560 14.2240 0.07 0.00276 0.70 0.02756 7 0.27559 70 2.75591
0.008 0.2032 0.570 14.4780 0.08 0.00315 0.71 0.02795 8 0.31496 71 2.79528
0.009 0.2286 0.580 14.7320 0.09 0.00354 0.72 0.02835 9 0.35433 72 2.83465
0.590 14.9860 0.10 0.00394 0.73 0.02874 10 0.39370 73 2.87402
0.010 0.2540 0.11 0.00433 0.74 0.02913 11 0.43307 74 2.91339
0.020 0.5080 0.600 15.2400 0.12 0.00472 0.75 0.02953 12 0.47244 75 2.95276
0.030 0.7620 0.610 15.4940 0.13 0.00512 0.76 0.02992 13 0.51181 76 2.99213
0.040 1.0160 0.620 15.7480 0.14 0.00551 0.77 0.03031 14 0.55118 77 3.03150
0.050 1.2700 0.630 16.0020 0.15 0.00591 0.78 0.03071 15 0.59055 78 3.07087
0.060 1.5240 0.640 16.2560 0.16 0.00630 0.79 0.03110 16 0.62992 79 3.11024
0.070 1.7780 0.650 16.5100 0.17 0.00669 0.80 0.03150 17 0.66929 80 3.14961
0.080 2.0320 0.660 16.7640 0.18 0.00709 0.81 0.03189 18 0.70866 81 3.18898
0.090 2.2860 0.670 17.0180 0.19 0.00748 0.82 0.03228 19 0.74803 82 3.22835
0.680 17.2720 0.20 0.00787 0.83 0.03268 20 0.78740 83 3.26772
0.100 2.5400 0.690 17.5260 0.21 0.00827 0.84 0.03307 21 0.82677 84 3.30709
0.110 2.7940 0.22 0.00866 0.85 0.03346 22 0.86614 85 3.34646
0.120 3.0480 0.700 17.7800 0.23 0.00906 0.86 0.03386 23 0.90551 86 3.38583
0.130 3.3020 0.710 18.0340 0.24 0.00945 0.87 0.03425 24 0.94488 87 3.42520
0.140 3.5560 0.720 18.2880 0.25 0.00984 0.88 0.03465 25 0.98425 88 3.46457
0.150 3.8100 0.730 18.5420 0.26 0.01024 0.89 0.03504 26 1.02362 89 3.50394
0.160 4.0640 0.740 18.7960 0.27 0.01063 0.90 0.03543 27 1.06299 90 3.54331
0.170 4.3180 0.750 19.0500 0.28 0.01102 0.91 0.03583 28 1.10236 91 3.58268
0.180 4.5720 0.760 19.3040 0.29 0.01142 0.92 0.03622 29 1.14173 92 3.62205
0.190 4.8260 0.770 19.5580 0.30 0.01181 0.93 0.03661 30 1.18110 93 3.66142
0.780 19.8120 0.31 0.01220 0.94 0.03701 31 1.22047 94 3.70079
0.200 5.0800 0.790 20.0660 0.32 0.01260 0.95 0.03740 32 1.25984 95 3.74016
0.210 5.3340 0.33 0.01299 0.96 0.03780 33 1.29921 96 3.77953
0.220 5.5880 0.800 20.3200 0.34 0.01339 0.97 0.03819 34 1.33858 97 3.81890
0.230 5.8420 0.810 20.5740 0.35 0.01378 0.98 0.03858 35 1.37795 98 3.85827
0.240 6.0690 0.820 20.8280 0.36 0.01417 0.99 0.03898 36 1.41732 99 3.89764
0.250 6.3500 0.830 21.0820 0.37 0.01457 1.00 0.03937 37 1.45669 100 3.937010
0.260 6.6040 0.840 21.3360 0.38 0.01496 38 1.49606
0.270 6.8580 0.850 21.5900 0.39 0.01535 39 1.53543
0.280 7.1120 0.860 21.8440 0.40 0.01575 40 1.57480
0.290 7.3660 0.870 22.0980 0.41 0.01614 41 1.61417
0.880 22.3520 0.42 0.01654 42 1.65354
0.300 7.6200 0.890 22.6060 0.43 0.01693 43 1.69291
0.310 7.8740 0.44 0.01732 44 1.73228
0.320 8.1280 0.900 22.8600 0.45 0.01772 45 1.77165
0.330 8.3820 0.910 23.1140 0.46 0.01811 46 1.81102
0.340 8.6360 0.920 23.3680 0.47 0.01850 47 1.85039
0.350 8.8900 0.930 23.6220 0.48 0.01890 48 1.88976
0.360 9.1440 0.940 23.8760 0.49 0.01929 49 1.92913
0.370 9.3980 0.950 24.1300 0.50 0.01969 50 1.96850
0.380 9.6520 0.960 24.3840 0.51 0.02008 51 2.00787
0.390 9.9060 0.970 24.6380 0.52 0.02047 52 2.04724
0.980 24.8920 0.53 0.02087 53 2.08661
0.400 10.1600 0.990 25.1460 0.54 0.02126 54 2.12598
0.410 10.4140 0.55 0.02165 55 2.16535
0.420 10.6680 1.000 25.4000 0.56 0.02205 56 2.20472
0.430 10.9220 0.57 0.02244 57 2.24409
0.440 11.1760 0.58 0.02283 58 2.28346
0.450 11.4300 0.59 0.02323 59 2.32283
0.460 11.6840 0.60 0.02362 60 2.36220
0.470 11.9380 0.61 0.02402 61 2.40157
0.480 12.1920 0.62 0.02441 62 2.44094
0.490 12.4460 0.63 0.02480 63 2.48031
29
ALPHABETICAL INDEX
ITEM PAGE ITEM PAGE

A Micrometer
Angle Meter 22 Outside Disc Type 10
C Electronic Digital With/Without Output 8, 9
Calipers Carbon Fibre 7 Interchangeable Anvils 10
Dial 6 Mul-T-Anvil 11
Electronic Digital 6 Rounded Anvil 11
Inside Spring 21 Sheet Metal 10
Internal / External 7 Standard 9
Outside Spring 21 Standard Micrometer Sets 9
Pocket Slide 7 V-Anvil 11
Vernier 6 O
Vernier, Long Range 7 Oil M1® All Purpose 28
Water Resistant Electronic Digital 6 Tool and Instrument 28
Clamps V-Blocks and Clamps 22 P
Combination Sets 18 Parallels Adjustable 23
D Steel 23
Dividers Spring 21 Pocket Laser Tachometer 27
E Protractor Steel 22
Edge Finders 25 Universal Bevel Vernier 22
G Punches Automatic Centre 24
Gauge Block Sets 26 Centre 24
Gauges Bore, Dial 14 Drive Pin 24
Depth, Electronic Digital 7 Drive Pin, Brass 24
Depth, Vernier 7 Drive Pin, Long Range 24
Engineers’ Combination (Taper, Wire, Thickness) 19 R
“Feeler” Stock / Thickness 20 Rules Steel 18
Height, Electronic Digital 8 S
Radius 21 Scribers Pocket 25
Saw Tension 27 Shaft Alignment Clamp Sets 27
Screw Pitch 21 Squares Precision Steel With / Without Base 18
Small Hole 15 Stands Dial Gauge 17
Taper 19 Dial Gauge With Cast Iron Base 17
Telescoping 15 Granite Surface Plate 26
Thickness 19 Indicator 17
Granite Surface Plates 26 Magnetic Base 17
Granite Surface Plate Cleaner 28 Micrometer 9
I V
Indicators Dial 15 V-Blocks Large 51mm (2”) Capacity (No.568) 22
Dial, Crankshaft Distortion 27 Large 102mm (4”) Capacity (No.578) 22
Dial, Groove 12 Magnetic, Dual-Vee 22
Dial Test 16 Steel (No.278) 22
Dial, Universal Back Plunger 16 Vises Pin 25
Electronic Digital 15 W
Electronic Digital - Wisdom® Plus 16 Wiggler / Centre Finders 25
L Wrenches T-Handle Tap 25
Levels Bench 23
Machinists’ 23
Precision 22
M
Micrometer
Depth Electronic Digital 12
Standard 12
Heads Electronic Digital With Rotating/Non-Rotating Spindle 12
Long Range 13
Standard Steel 13
Inside Electronic Digital Internal 3 Point 14
End Measuring Rods 10
Internal Bore Gauge Micrometer Sets 3 Point 13
Solid Rod 13
Tubular 14
Outside Blade Type 10
Can Seam, Stainless Steel 11
30
NUMERICAL index
CAT NO DESCRIPTION PAGE CAT NO DESCRIPTION PAGE

M1 M1 All Purpose Lubricant 28 579 Telescoping Gauges 15
AM-2 Angle Meter 22 635 Steel Rules 18
6 Screw Pitch Gauge 21 636 Steel Rules 18
9 Combination Sets 18 653 Dial Gauge Stand With Cast Iron Base 17
18 Automatic Centre Punches 24 660 Magnetic Base Indicator Holder 17
19 Steel Protractor 22 661 Mini Magnetic Base Indicator Holder 17
60 Precision Steel Squares 18 665 Dial Gauge Stand 17
63 Long Range Micrometer Heads 13 666 Feeler Stock Roll In Dispenser 20
66 Thickness Gauge 19 667 Thickness Gauge “Feeler Stock” 20
70 Pocket Scribers 25 668 Shaft Alignment Clamp Sets 27
73 Inside Spring Caliper 21 682EMZ Saw Tension Gauge 27
78 3 Point Internal Bore Gauge Micrometer Sets 13 696MZ Crankshaft Distortion Dial / Strain Gauge 27
79 Outside Spring Caliper 21 733 Electronic Digital Micrometers 8
83 Spring Caliper 21 749 Electronic Digital Depth Micrometer 12
93 T-Handle Tap Wrenches 25 762 Electronic Digital Micrometer Heads 12
98 Machinists’ Levels 23 780 3 Point Electronic Digital Internal Micrometers 14
117 Centre Punches 24 795 Electronic Digital Micrometer 8
124 Solid-Rod Inside Micrometers 13 796 Electronic Digital Micrometer 8
125 Vernier Calipers 6 797 Water Resistant Electronic Digital Calipers 6
130 Bench Level 23 799 Electronic Digital Calipers 6
154 Adjustable Parallels 23 823 Tubular Inside Micrometers 14
155 Screw Pitch Gauge 21 827 Edge Finders 25
156 Screw Pitch Gauge 21
828 Wiggler / Centre Finders 25
159 Screw Pitch Gauge 21
829 Small Hole Gauges 15
162 Pin Vises 25
831 Small Hole Gauges 15
167 Radius Gauge Set 21
1025 Pocket Slide Caliper 7
173 Thickness Gauges 19
1175 Dial Indicator Groove Gauges 12
183 Steel Protractor 22
1201 Dial Calipers 6
196 Universal Back Plunger Dial Indicators 16
1202 Dial Calipers 6
207 Stainless Steel Can Seam Micrometers 11
1251 Long Range Vernier Calipers 7
208 Stainless Steel Can Seam Micrometers 11
1620 Tool & Instrument Oil 28
220 Mul-T-Anvil Micrometers 11
2700 Electronic Digital Indicators - Wisdom® Plus 16
222 Sheet Metal Micrometers 10
3015 Thickness Gauges 19
224 Outside Micrometers With Interchangeable Anvils 10
3020 Precision Steel Squares With Base 18
234 Precision End Measuring Rods 10
3025 Dial Indicators 15
245 Engineers’ Combination Gauges 19
3040 Granite Surface Plates 26
248 Long Range Drive Pin Punches 24
3047 Gauge Block Sets 26
256 Disc Type Micrometers 10
3063 Granite Surface Plates 26
263 Micrometer Heads 13
SD3063 Granite Surface Plate Stands 26
269 Taper Gauges 19
3081 Dial Indicator 15
270 Taper Gauge 19
3088 Gauge Block Sets 26
272 Radius Gauges 21
278 V-Blocks & Clamp 22 3089 Bore Gauge Sets 14
359 Universal Bevel Vernier Protractor 22 3097 Precision Level 22
384 Steel Parallels 23 3100 Granite Surface Plates 26
435 Combination Sets 18 SD3100 Granite Surface Plate Stands 26
436 Standard Outside Micrometers 9 3160 Granite Surface Plates 26
S436 Standard Outside Micrometer Sets 9 SD3160 Granite Surface Plate Stands 26
440 Depth Micrometers 12 3200 Granite Surface Plates 26
445 Depth Micrometers 12 SD3200 Granite Surface Plate Stands 26
448 Vernier Depth Gauges 7 3206 Micrometer Stand 9
460 Standard Micrometer Heads 13 3566 Dual-Vee Magnetic V-Block 22
463 Standard Micrometer Heads 13 3600 Electronic Digital Indicators 15
467 Thickness Gauge 19 3648 Base Extension With Screws For 3753 Series 7
472 Screw Pitch Gauge 21 3657 Magnetic Base Indicator Holders 17
474 Screw Pitch Gauge 21 3732 Electronic Digital Micrometer 9
476 Screw Pitch Gauge 21 3734 Electronic Digital Micrometer 8
483 V-Anvil Micrometers 11 3751 Electronic Digital Height Gauge 8
486 Blade Type Micrometers 10 3752 Electronic Digital Height Gauge 8
565 Drive Pin Punches 24 3753 Electronic Digital Depth Gauges 7
B565 Brass Drive Pin Punches 24 3808 Dial Test Indicator 16
568 V-Blocks & Clamp 22 3809 Dial Test Indicator 16
576 Rounded Anvil Micrometers 11 5000 Carbon Fibre Caliper 7
577 Rounded Anvil Micrometers 11 5006 Internal / External Caliper 7
578 V-Blocks & Clamp 22 7793Z Pocket Laser Tachometer Kit 27
31
The L S Starrett Company Limited
Oxnam Road
Jedburgh
Scotland
TD8 6LR
Tel: +44 (0)1835 863501

Fax: +44 (0)1835 863018
Email: [email protected]
Web: www.starrett.co.uk

Starrett Kezi Akcios 2010

Uploaded by

Copyright:

Available Formats

Starrett Kezi Akcios 2010

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Starrett Kezi Akcios 2010

Uploaded by

Copyright:

Available Formats

10 20 30 40 50 60 70 80 90 100 110 PRECISION TOOLS

CATALOGUE www.starrett.co.uk • +44 (0)1835 863501

Laguna Hills, California, USA

Waite Park, Minnesota, USA

Cleveland, Ohio, USA

Mount Airy, North Carolina, USA Santo Domingo, Dominican Republic

The L.S. Starrett Company has been involved

Starrett Distribution Centers and Offices Headquartered in Athol, MA since its

The Company employs over 2,000 people

GAUGE BLOCK SETS

GENERAL PRECISION MEASURING INSTRUMENTS, SERVICE

Cat No Range Graduation Item No 1202-8 8” 0.001” BQ9993

797B-6/150 150mm / 6” DM610 1202-12 12” BQ9995

797B-8/200 200mm / 8” 0.01mm / 0.0005” DM612

799 series - Electronic digital CaliperS

125MEAW series - vernier caliperS

799 Series also offers a small selection of • Instant inch/mm conversion.

1251MEA-12/300 300mm / 12” BR5860

5000 series - Carbon Fibre CaliperS

448 series - VERNIER DEPTH gauges

electronic digital height gauges 795 / 796 Series - Electronic digital

733 / 3734 series - electronic digital

Cat No Range Graduation Item No 733MEXFLZ-50 25 - 50mm / 1 - 2” DL966921

3751AZ-6/150 150mm / 6” 0.01mm / 0.0005” DR9430 733MEXFLZ-75 50 - 75mm / 2 - 3” DL966922

3734xfl-1 0 - 25mm / 0 - 1” 0.001mm / 0.00005” dl9671

3732 series - Electronic digital Cat No Range Graduation Item No

436xrl-12 11 - 12” cr852

V436.2MXRL-25 0 - 25mm CU9508

436 SERIES - standard outside

234 Rod With Insulating Handle

Cat No Range Graduation Item No Cat No Range Graduation Item No

207MZ 0 - 9.5mm 0.01mm BX642

207Z 0 - 0.375” 0.001” BX637

208 SERIES - STAINLESS STEEL CAN SEAM

Cat No Range Minimum Diameter Graduation Item No

577MXP 0 - 25mm 9.5mm 0.01mm DC765

576XR 0 - 1/2” 5/16” 0.001” DC637

577XP 0 - 1” 3/8” 0.001” DC757

Cat No Range Graduation Description Item No

Cat No Range No of Flutes It Will Measure Graduation Description Item No

Cat No Range Graduation Item No 749 SERIES - ELECTRONIC digital DEPTH

STYLE 1-10 STYLE 2-10, 2-20 UPPER JAW

Contact Part No (PT)

Style 2-20 30920 30921 25 1” 150 6” 6.7 0.265” 1.3 0.051”

• Starrett designed microprocessor. • Instant inch/mm conversion.

Cat No Range Graduation Description Item No

460 SERIES - standard MICROMETER 124 SERIES - SOLID-ROD INSIDE

Measuring I.D. with

Cat No Range Graduation Item No

463L 0 - 1/2” 0.001” Lock Nut CX012 124AZ 2 - 8” 6 BR412

263 SERIES - MICROMETER heads

Cat No Range Graduation Description Item No

263ML* 0.01mm Lock Nut CI302

V263MRL* 0.001mm Ratchet Stop, Lock Nut CI322

Cat No Range No of Heads No of Rings Item No

S78MXTDZ 10 - 20mm 3 2 BN6872

823 SERIES - TUBULAR INSIDE 3089 series - bore gauge sets

Measuring inside diameter

Cat No Range Graduation Movement Of Screw Description Item No

780 SERIES - 3 POINT ELECTRONIC digital