Scribd
Upload
102 views

Control and PLC

The 50-hour PLC and Control course covers various topics including classic control components, sensors, wiring, control diagrams, Siemens PLC types, digital/analog I/O, programming in TIA Portal, data types, math operations, timers/counters, basic and advanced projects, and SCADA systems. Hands-on training will utilize equipment such as Siemens S7 PLCs, contactors, circuit breakers, timers, and sensors. The creativity club will provide 10-15 PCs, desks, power outlets, and other equipment to support the 10-day course. The cost for each student is 300 JD.

Uploaded by

Ahmad Abunassar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views

Control and PLC

The 50-hour PLC and Control course covers various topics including classic control components, sensors, wiring, control diagrams, Siemens PLC types, digital/analog I/O, programming in TIA Portal, data types, math operations, timers/counters, basic and advanced projects, and SCADA systems. Hands-on training will utilize equipment such as Siemens S7 PLCs, contactors, circuit breakers, timers, and sensors. The creativity club will provide 10-15 PCs, desks, power outlets, and other equipment to support the 10-day course. The cost for each student is 300 JD.

Uploaded by

Ahmad Abunassar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PLC and Control course.

50 training hour

Main concept:

1- Classic control component:


-circuit breaker.
-contactors.
-Timers.
-counters.
-Fuses.
-push button.
-switches
2- Type of sensors and load cell.
3- Wiring and calculate the diameter of wires needed
4- Read, Design simple control circuits and diagram:
-control diagram how to read and understand.
-apply basic control diagram using hardware.
5- Drawing basic control diagram using AutoCAD electrical.
6- Types of Siemens plc:
-s7-200.
-s7-300.
-s7-400.
-s7-1200.
-s7-1500.
-ET200sp
7- Concept of digital I/O in Siemens plc.
8- Concept of analog I/O in Siemens plc.
9- How to use Tia portal to Programming Siemens controller.
10- Data type and how to use the correct data type.
11- Math and comparator operation.
12- Data block, function block, Organization block.
13- Timer and counter specifications.
14- Using Tia portal to programming basic projects.
15- Calibration of sensors linear and nonlinear.
16- Concept of PWM and PID
17- How to use PWM and PID in tia portal.
18- Way of thinking to solve problem and give the correct solution.
19- Using Tia portal to programming advance projects.
20- Introduction to Scada system.
21- Final project.
Needed from creativity club for the course:
- PC core i5 (10-15) .
- Desks (10-15).
-220vac electrical points (10-15).
-Power supply 24vdc (10-15).
-Data show.
- Whiteboard.
-Coffee for the break for 10 days.

I’ll provide at least (5) panels prepared with hardware needed for the
course:
-plc s7-1200.
-contactors.
-Circuit breakers.
-Timers.
-Temperature sensors.
-Wires.
-Push button.
-Industrial lamps

Cost of course:
300 JD for each student.

You might also like