Scribd Logo
Upload

Welcome to Scribd!

  • 90 views

    Repport UT CS - 7

    Uploaded by

    daemsal
    This document summarizes an ultrasonic examination of welding on pipes for a gas field development project in Algeria. The examination was performed according to API 1104 standards using Olympus ultrasound equipment with 4 MHz probes. Flaws were found in two locations between 220-230 degrees and 240-246 degrees, each measuring over 11mm in depth. The flaws caused the welds to be rejected under the acceptance criteria.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Repport UT CS - 7

    Uploaded by

    daemsal
    90 views1 page
    This document summarizes an ultrasonic examination of welding on pipes for a gas field development project in Algeria. The examination was performed according to API 1104 standards using Olympus ultrasound equipment with 4 MHz probes. Flaws were found in two locations between 220-230 degrees and 240-246 degrees, each measuring over 11mm in depth. The flaws caused the welds to be rejected under the acceptance criteria.

    Original Description:

    ut

    Original Title

    Repport UT CS -7

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes an ultrasonic examination of welding on pipes for a gas field development project in Algeria. The examination was performed according to API 1104 standards using Olympus ultrasound equipment with 4 MHz probes. Flaws were found in two locations between 220-230 degrees and 240-246 degrees, each measuring over 11mm in depth. The flaws caused the welds to be rejected under the acceptance criteria.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    90 views1 page

    Repport UT CS - 7

    Uploaded by

    daemsal
    This document summarizes an ultrasonic examination of welding on pipes for a gas field development project in Algeria. The examination was performed according to API 1104 standards using Olympus ultrasound equipment with 4 MHz probes. Flaws were found in two locations between 220-230 degrees and 240-246 degrees, each measuring over 11mm in depth. The flaws caused the welds to be rejected under the acceptance criteria.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    1 of 1

    Report No.: 7
    ULTRASONIC EXAMINATION
    SHEET
    CERTIFICATE Date: 01/11/2012
    Project
    IN SALAH GAS SOUT FIELDS Bonatti Job
    DEVELOPMENTS PROJECT DZ 3001

    ITEM DESCRIPTION welding examination confirmation UT CS 32X11,1mm

    APPLICABLE CODE APPLICABLE PROCEDURE APPLICABLE SPECIFICATION / ACCEPTANCE CRITERIA

    UUOO-P-QQPF-000-3515 Rev A API 1104

    EXAMINATION / SURFACE CONDITION:


    AS WELDED PWHT CAPPING CLEANNING
    YES ✘ NO YES NO ✘ YES NO ✘ YES ✘ NO

    EQUIPMENT
    UT SET PROBE No 1 PROBE No 2 PROBE No 3 PROBE No 4
    TRADE MARK olympus olympus olympus
    TYPE EPOCH 600
    ANGLE BEAM 70 60
    WAVE TYPE TRANSVERS TRANSVERS
    PROBE AREA DIMENSIONS 8x9 8x9
    GAIN SETTING 56db 56db
    SCALE 50 mm 50 mm
    FREQUENCY 4 Mhz 4 Mhz
    SERIAL No. 120346104 821604 821198
    REFERENCE BLOCK same materiel CALIBRATION BLOCK: V1-V2 COUPLANT: IPRAGEL
    SCANNING DRAFT Kp 30 ML 67

    EXAMINATION RESULT
    DIMENSION TYPE ASSESSMENT
    LOCATION
    (FROM 12 O'CLOCK)
    LENGTH HIGH DEPTH LINEAR ROUNDED N/A ACCEPT REJECT

    220 -230 10cm 11.40mm ✘ ✘

    240 -246 6cm 11.40mm ✘ ✘

    REMARKS / NOTE:

    NOW ACCED 50% DAC

    Bonatti-Inspector Bonatti QA/QC PUIL ISG

    DATE: DATE: DATE: DATE:

    You might also like