Date: 22.11.
07
Project No.
Client
Equipment
Vessel weight calculations
1 Geometric volume 1000 Lt Pl.Enter the value
Working volume 800 Lt
H:D ratio 2 Pl.Enter the value
Density Of Steel 7830 kg/m3
Density of liquid 1000 kg/m3
2 Shell Dimensions
Shell thickness 8.00 mm Pl.Enter the value
3 Dish Dimensions
Dish thickness 8.00 mm Pl.Enter the value
No. of dishes 2.00 Pl.Enter the value
4 Shell Jacket (Dimpled)
Jacket spacing 20.00 mm Pl.Enter the value
Jacket thickness 6.00 mm Pl.Enter the value
5 Shell Jacket (Limpet coil)
Pipe OD 60.30 mm Please maintain any +ve number
Thickness 2.00 mm to obtain the value enen if there
6 Shell Insulation
Insulation thickness 25.00 mm Pl.Enter the value
7 Shell Cladding
Cladding spacing 25.00 mm Pl.Enter the value
Cladding thickness 2.00 mm Pl.Enter the value
8 Dish jacket (if any)
Jacket spacing 50.00 mm Pl.Enter the value
Jacket thickness 0.00 mm Pl.Enter the value
9 Dish Insulation
Insulation thickness 0.00 mm Pl.Enter the value
10 Skirt Support
Skirt length mm Pl.Enter the value
Skirt thickness mm Pl.Enter the value
11 Leg support
Leg OD 88.90 mm Pl.Enter the value
Thickness 4.50 mm Pl.Enter the value
Leg length 800.00 mm Pl.Enter the value
No of Legs 3 Pl.Enter the value
12 Baffles
Baffle thickness 8.00 mm Pl.Enter the value
No. of baffles 4.00 Pl.Enter the value
13 Agitator Assembly
Shaft diameter 80.00 mm Pl.Enter the value
Shaft length 1200.00 mm Pl.Enter the value
Total weight of the vessel 894.82 kg
Other allowance 89.48 kg
Total Wt of the Empty vessel = 984.30 kg
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
ase maintain any +ve number
btain the value enen if there is no limpet coil
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
nter the value
Customer :
Cooling water Line Calculations
Geometric Volume 50 Lt.
Working Volume 40 Lt.
Cooling Time , T 30 Min
CoolingTemp gradient °C 1.0333333333 °C/min
Properties of Vessel
Empty Weight of vessel 140.00 Kg
Density of steel 7830 Kg / Mt 3
3-3-95,Table 3-118
Specific Heat , Cp 0.504 KJ / Kg O C 3-146,table 3-205
Initial Temperature 121 O
C
Final Temperature 90 O
C
Properties of Cooling water
Density 1000 Kg / Mt 3
Specific Heat , Cpc 4.2 KJ / Kg O C
Initial Temperature 25 O
C
Final Temperature 30 O
C
Temperature difference , DTc 5 O
C
Cooling after ESIP
Temperature difference , DT 31 O
C
Time forCooling 30 min
Heat Load 2187.36 KJ 520.8
Mass of water 104.16 Kg
Cooling water Required 208.32 Kg/hr
Volumetric Flow rate 0.20832 m3/hr
With 30 % Excess , Ms 0 m3/hr
Pipe Size :
Velocity , u 3 Mt / Sec
Pipe Inner Area Requiered , A = Ms / ( r * u ) 1.928888889E-05 Mt2
Pipe inner Diameter Required , Di = Sqrt (A * 4 / p ) 0.0049554205 Mt
5 mm
Proposed Pipe size DN25
OD 33.7 mm
ID 29.7 mm
Thickness 2 mm
Area of the pipe 0.0006928817 m2
Pressure delivered by DN25 250.5478225976 pa
0.0025054782 bar
Considering pressure 15 bar 1.157333333E-07 m2
Dia of the pipe 0.0003838452 m
0.3838452195 mm
Considering pressure 10 bar 1.736E-07 m2
Dia of the pipe 0.0004701125 m
0.470112464 mm
Considering pressure 5 bar 3.472E-07 m2
Dia of the pipe 0.0006648394 m
0.6648394225 mm
Considering pressure 3bar 5.786666667E-07 m2
Dia of the pipe 0.000858304 m
0.8583040037 mm
Considering pressure 2bar 0.000000868 m2
Dia of the pipe 0.0010512034 m
1.0512034266 mm
Date :
3-3-95,Table 3-118
3-146,table 3-205
Kcal
Proposed Pipe size DN65
OD 33.7 mm
ID 29.7 mm
Thickness 2 mm
Area of the pipe 0.0006928817 m2
Velocity of the pipe @3bar 3592.1286 m/sec
