Scribd
Upload
240 views

Power Factor Meters

The document discusses different types of power factor meters. It describes single phase and three phase electrodynamometer power factor meters which measure the power factor using fixed and moving coils. It also describes rotating magnetic field and alternating field types of moving iron power factor meters. The power factor meter determines the load type on a transmission line and calculates losses by measuring the angle between voltage and current.

Uploaded by

Murali Artham Guptha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
240 views

Power Factor Meters

The document discusses different types of power factor meters. It describes single phase and three phase electrodynamometer power factor meters which measure the power factor using fixed and moving coils. It also describes rotating magnetic field and alternating field types of moving iron power factor meters. The power factor meter determines the load type on a transmission line and calculates losses by measuring the angle between voltage and current.

Uploaded by

Murali Artham Guptha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Power Factor Meter

Definition: The power factor meter measures the power factor of


a transmission system. The power factor is the cosine of the angle
between the voltage and current. The power factor
meter determines the types of load using on the line, and it
also calculates the losses occur on it.
The power factor of the transmission line is measured by dividing
the product of voltage and current with the power. And the value
of voltage current and power is easily determined by the
voltmeter, ammeter and wattmeter respectively. This method
gives high accuracy, but it takes time.
Types of Power Factor Meter
The power factor meter is of two types. They are
1.Electrodynamometer
a.Single Phase Electrodynammeter
b.Three Phases Electrodynamometer
2.Moving Iron Type Meter
a.Rotating Iron Magnetic Field
b.Number of Alternating Field
Single Phase Electrodynamometer Power Factor Meter
The construction of the single phase electrodynamometer is shown in the
figure below. The meter has fixed coil which acts as a current coil. This
coil is split into two parts and carry the current under test. The magnetic
field of the coil is directly proportional to the current flow through the
coil.
The meter has two identical pressure coils A and B. Both the coils are
pivoted on the spindle. The pressure coil A has no inductive resistance
connected in series with the circuit, and the coil B has highly inductive
coil connected in series with the circuit.
The current in the coil A is in phase with the circuit while the
current in the coil B lag by the voltage nearly equal to 90º. The
connection of the moving coil is made through silver or gold
ligaments which minimize the controlling torque of the moving
system.
The meter has two deflecting torque one acting on the coil A,
and the other is on coil B. The windings are so arranged that
they are opposite in directions. The pointer is in equilibrium
when the torques are equal.
Three Phase Electrodynometer Power Factor
Meter
The construction of the three phase meter is shown in the figure
below. The electrodynamometer is only useful for the balanced load.
The moving coil is placed at an angle of 120º. They are connected
across different phases of the supply circuit. Both the coil has a
series resistance.
The voltage across the coil A is V12 and the current across it IA1. The
circuit of the coil is resistive, and hence the current and voltage are in
phase with each other. Similarly, the voltage V13 and the current IB1 is in
phase with each other.
The phasor diagram of the three phase electrodynamic meter is shown
in the figure below.
Moving Iron Power Factor Meter
The moving iron instrument is divided into two categories. They are the
rotating magnetic field to some alternating fields.
A. Rotating Field Power factor Meter – The following are the essential
feature of the rotating magnetic field. The power factor meter has three
fixed coils, and their axes are 120º displaced from each other. The axes
are intersecting each other. The coils are connected to the three phase
supply with the help of the current transformer.
The P is the fixed coil connected in series with the high resistance circuit
across the phases 2 and 3. There is an iron cylinder across coil P. The
two iron vanes are fixed to the cylinder. The spindles also carry damping
vanes and pointer.

The phasor diagram of the power factor meter is shown in the figure.
The total torque of the meter is zero for steady state
deflection.

The coil P and the iron cylinders generate the alternating flux
which interacts with the flux of the fixed coils. The interaction
of the coil generates the moving system which determined the
phase angle of the current. The vanes of the power factor meter
are magnetized by the current of the moving coil which is in
phase with the system line voltage.
Advantages of Moving Iron power Power Factor
1.The meter requires large working force as compared to the
electrodynamometer type meter.
2.The coils of the moving iron instruments are fixed permanently.
3.The range of the scale extends up to 360º.
4.The construction of the meter is robust and simple.
5.The moving iron instrument is cheap as compared to
electrodynamic meter.

Disadvantages of moving iron instrument


1.The loss occurs in the iron part of the meter. The losses depend
on the load and the frequency of the meter.
2.The meter has low accuracy.
3.The calibration of the meter is affected because of the variation in
supply frequencies, voltage and waveforms etc.

You might also like