tx2 en

You are on page 1of 2

TX2 Digital Load Cell Transmitters

Precise Digital Weighing Data to PLC / DCS or PC

RS-232C
RS-485
Modbus RTU
Modbus TCP/IP
Profibus DP
Profinet
CANopen
EtherNet/IP
EtherCAT
CC-Link
Powerlink

Features TX2 digital transmitter family is designed for static or


• Communication: Reliable data dynamic weighing and force measurement processes to
transfer with industrial
provide fast and accurate digital data through RS-232C,
communication protocols
for various for PLC / DCS RS-485, Ethernet TCP/IP and bus systems as Profibus,
or PC systems Modbus TCP, Modbus RTU, Profinet, CANopen, EtherNet/IP,
• High speed: 800 conversion/sec. EtherCAT, CC-Link, Powerlink.
• Weighing functions: Zeroing &
taring, power-on zero, AZT, net Weighing functions such as Zeroing, Taring, Power-On zero,
indication at power on, motion Net indication at power on, Motion detection, etc. are
detection
integrated in TX2 transmitters. Configurable vibration
• Software support: Windows
based BAYKON xFace software suppression digital filter settings and calibration with test
for calibration and setup via PC weight or electronic calibration without test weights ( eCal )
• eCal: Electronic calibration without via Windows based BAYKON xFace software. DIN rail type
test weight enclosure provides easy montage in control panel.
• Vibration filter: Configurable
active filter for stable weight
TX2 Specifications
TX2 Series Instruments TX2 AD : RS-232C / RS-485 TX2 CO : CANopen
TX2 EN : Ethernet / Modbus TCP/IP TX2 EI : EtherNet/IP
TX2 MB : Modbus RTU TX2 EC : EtherCAT
TX2 PB : Profibus DP TX2 CC : CC-Link
TX2 PN : Profinet TX2 PL : Powerlink
A/D Converter
Type 24 bit Delta-Sigma ratiometric with integral analog and digital filters
Conversion rate Up to 800 measurements per second
Minimum input voltage < 1 mV
Minimum input sensitivity 0.1µV per interval
Analogue input range 0 mV to 18 mV unipolar or -18 mV to 18 mV bipolar
Linearity Within 0.0015% FS, 2 ppm/°C
Resolution Internal up to 8 000 000; External up to 100 000 counts in Weighing / Force modes,
1 000 000 counts for unipolar input and for selected range in Count mode and
2 000 000 counts for bipolar input and for selected range in Count mode
Calibration and Programming
Calibration By etalon weights: Via xFace software or fieldbus
eCal: Electronic calibration without etalon weights via xFace
Count mode: All instruments are adjusted in production for equal performance. Calibration at PLC side
Digital filter 10 step adjustable digital adaptive filter
Weighing functions Tare, zero, auto zero tracking, motion detection, auto-zero at power-up, net indication at power on
Load Cell
Excitation 5 VDC, max. 100 mA
Number of load cells Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel
Connection 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection
Communication
Serial Interface RS-232C 9600 baud, 8 None 1, Continuous or demand (BSI mode)
Serial Interface RS-485 (TX2 AD / TX2 MB) 1200 to 57600 baud, 7 even/odd, 8 None 1, demand (BSI mode) or Modbus RTU
Modbus RTU interface (TX2 MB) Up to 31 units on the bus, Baudrate up to 57600
Ethernet / Modbus TCP/IP (TX2 EN) 10Mbits (half duplex), galvanically isolated
Profibus DP V1 interface (TX2 PB) 9,6 kbits/s to 12 Mbits/s automatic baudrate detection
ProfiNet interface (TX2 PN) 100Mbits (full duplex), galvanically isolated
CANopen interface (TX2 CO) 10 kbits/s to 1 Mbits/s automatic baudrate detection
EtherNet/IP (TX2 EI) 10 Mbit/s or 100 Mbit/s, full duplex, galvanically isolated
Adressing: Assign DHCP or manual IP with PC software
EtherCAT (TX2 EC) 100 Mbit/s, full duplex, galvanically isolated
CC-Link (TX2 CC) 156 kbps - 10 Mbps communication speed
Adressing: Up to 64 stations per network
Powerlink (TX2 PL) 100Mbit/s, half duplex
Power Supply and Others
Power Supply 10 to 28 VDC, min 60mA – max. 600 mA (According to model and connected load cell units )
Enclosure Between -15°C and +55°C at 85% RH max, non-condensing
Operation Conditions Polyamide, for DIN-rail mount, protection class IP20
(Specifications are subject to change without notice. 04.04/2017)

Typical Application

RS-232C
RS-485
Modbus RTU
Modbus TCP/IP
Profibus DP
Profinet
CANopen
EtherNet/IP
EtherCAT
CC-Link
Powerlink

Kimya Sanayicileri O.S.B Organik Cad. No:31


Tepeoren 34956 Tuzla / Istanbul / TURKEY
+90 216 593 26 30 +90 216 593 26 38
in fo @ ba yk o n. com baykon.c om

You might also like