Lighting

Ledinaire floodlight maxi

BVP106 LED100/740 PSU VWB100

LED module, system flux 10000 lm - 740 neutral white - Power

supply unit - Beam category A1 - 323 mm

The Ledinaire range contains a selection of popular off-the-shelf LED luminaires that
comes with the Philips high quality levels at a competitive price. Reliable, energy-efficient
and affordable – just what you need.

Product data

General Information luminaires - January 2018”: statistically there is

Number of light sources - no relevant difference in lumen maintenance

Lamp family code LED100S [ LED module, system flux 10000 lm] between B50 and for example B10. Therefore

Light source color 740 neutral white the median useful life (B50) value also

Light source replaceable No represents the B10 value.

Number of gear units 1 unit Constant light output No

Driver/power unit/transformer Power supply unit Number of products on MCB of 16 A type B 15

Driver included Yes RoHS mark RoHS mark

Optical cover/lens type Tempered glass Light source engine type LED

Luminaire light beam spread 100° x 100°

Connection Flying leads/wires Light Technical

Cable Cable 0.5 m with cable connector 3-pole Upward light output ratio 0

Protection class IEC Safety class I Standard tilt angle posttop -

Flammability mark For mounting on easily flammable surfaces Standard tilt angle side entry -

CE mark CE mark

ENEC mark - Operating and Electrical

Warranty period 3 years Input Voltage 220 to 240 V

Optic type outdoor Beam category A1 Input Frequency 50 to 60 Hz

Remarks *-Per Lighting Europe guidance paper Inrush current 38 A

“Evaluating performance of LED based Inrush time 0.25 ms

Datasheet, 2018, October 2 data subject to change

Ledinaire floodlight maxi

Power Factor (Min) 0.9 Init. Corr. Color Temperature 4000 K

Init. Color Rendering Index 78

Controls and Dimming Initial chromaticity (0.375, 0.379) SDCM<5

Dimmable No Initial input power 100 W

Power consumption tolerance +/-10%

Mechanical and Housing

Housing Material Aluminum die-cast Over Time Performance (IEC Compliant)
Reflector material Aluminum Control gear failure rate at median useful life 7.5 %

Optic material Glass 35000 h

Optical cover/lens material Tempered glass Lumen maintenance at median useful life* L70

Fixation material Steel 50000 h

Mounting device Mounting bracket adjustable

Optical cover/lens shape Flat Application Conditions

Optical cover/lens finish Clear Ambient temperature range -25 to +40 °C

Overall length 342 mm Performance ambient temperature Tq 25 °C

Overall width 265 mm Maximum dim level Not applicable

Overall height 85 mm

Effective projected area 0.085 m² Product Data

Width 323 mm Full product code 871869938406799

Order product name BVP106 LED100/740 PSU VWB100

Approval and Application EAN/UPC - Product 8718699384067

Ingress protection code IP65 [ Dust penetration-protected, jet-proof] Order code 912401483114

Mech. impact protection code IK08 [ 5 J vandal-protected] Numerator - Quantity Per Pack 1

Surge Protection (Common/Differential) Luminaire surge protection level until 4 kV Numerator - Packs per outer box 5

differential mode and 4 kV common mode Material Nr. (12NC) 912401483114

Net Weight (Piece) 3.550 kg

Initial Performance (IEC Compliant)

Initial luminous flux (system flux) 10000 lm

Luminous flux tolerance +/-10%

Initial LED luminaire efficacy 100 lm/W

Dimensional drawing

Ledinaire floodlight BVP105/106

Datasheet, 2018, October 2 2 data subject to change

Ledinaire floodlight maxi

© 2018 Philips Lighting Holding B.V. All rights reserved. Philips Lighting reserves the right to make changes in specifications

and/or to discontinue any product at any timewithout notice or obligation and will not be liable for any consequences resulting www.lighting.philips.com

from the use of this publication. 2018, October 2 - data subject to change