Tutorial 520
Tutorial 520
While This is Just a Written Tutorial Of using windows phone internals I am Just Providing Its
Tutorial.
All Work Is Done By HealthCliff,
He Is Owner And Creator Of WindowsPhoneInternals.
Warning:This tool may cause irrevocable damage and/or data loss when applied to any
target device. As such please ensure that you fully comprehend and accept the Disclaimer
and warnings before proceeding any further.
Means That This Can Really Brick Your Lovely Wp Device, The Developer (HealthCliff)
Or anyone is not responsible For any Damage caused to your Phone. You are all
responsible for every action You take.
Supported Phones:
Lumia 520, 521, 525, 620, 625, 720, 820, 920, 925, 928, 1020 and 1320 are supported. These
bootloaders can be unlocked.
Supported OS:
8.10.12393.890
8.10.12397.895
8.10.14219.341
8.10.14226.359
8.10.14234.375
8.10.15116.125
8.10.15148.160
10.0.10512.1000
10.0.10536.1004
10.0.10549.4
10.0.10581.0
10.0.10586.11
10.0.10586.36
Requirements,
1.WindowsPhoneInternals -Get It > here.
2.Windows Device Recovery Tool - Get It > here
3.SBL3(Optional But Required) - In attachment
4.Compatible FFU Image For Your Phone.(You Can Get It with Windows Device Recovery
Tool or WDRT.)
5.Drivers(Installed With WDRT).
6.Lumia Emergency Flash Loaders - You will Get It from here.
The Tools And Resources At No. 3,4,6 Differ From Phone to Phone So i WIll Tell You How To
Get This All.
Preparation:
3.Engineering SBL3.
3.1: Look For Attachment I Have Provided SBL3 Of all lumia phones in Just a zip!!
3.2: Download And Extract It.
3.3: Look For Your Phone's SBL3 And Backup That file to a safe place.
Real Instructions,Finishing Up
Now its time to unlock your boot loader and Enable root access,
Make Sure You Got All Necessary Files.
1.Unlocking BootLoader.
1.1: Connect WP to PC via Data Cable and Run WindowsPhoneInternals.
1.2: Tap On Manual mode then Switch to Flash Mode.
1.3: Click On Unlock BootLoader And Load All Your Resource(FFU,Hex,etc)
1.4: Click On continue And Wait Till It Unlock Your Bootloader with sbl3 enabled.
1.5: Wait For Success Message And Your Bootloader is Unlocked.
In Case if you bricked your device you can just follow my new post it maybe can help you.
Take steps given in this article to try to solve most bricked lumia device.
Attached Files
Engineering-SBL3s.zip - [Click for QR Code] (1.37 MB, 9364 views)
https://forum.xda-developers.com/windows-phone-8/development/fix-dead-phone-bricked-
bootloader-t3496232
[FIX][LUMIA]Dead Phone,Bricked
bootloader,infinite boot loop,Boot Failed etc.
Hello all lumia owners ,with the release of windows phone internals there is a great rush to
unlock bootloader and install custom rim.
In previous post I have posted about unlocking bootloader and enabling root access but what if
you have bricked your lumia?
In That case Please read this thread and fix your lumia.
Lumia can be bricked by bad updating phone or disconnection in update or something else it
might also be bricked by flashing custom Rom.
REQUIREMENTS
1.Windows Device Recovery Tool (WDRT)- Get it here
2.FFU image for your phone.(Larger than 1gb)(If you have custom rom then skip ffu image and
jump to method 2) - check here
3.Drivers (Installed with WDRT)
Instruction
Method 1
Method 2 (Easy)
If you didn bricked your device in flashing or unlocking bootloader then Its better to jump out
method 1 as it is more easy for you.
Or if you have custom rom for your phone and not want to download full original ffu then stay
here.
2. Go to :
For 32bit window.
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool
For 64bit window.
C:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool
Or whatever install folder you selected.
3. Hold shift and right click on your mouse and click open command windows here.
4. Paste thor2 -mode uefiflash -ffufile " " in cmd and click enter.(This will start searching your
phone)
4. Press And Hold Poweroff + Lower Volume Button (Dont release it if your phone turn on
automatically)(Especially in Bootloop).
5. Connect your phone to PC ( of course using USB cable).
6. if it detect Your device it will take you to Flash Screen (Ignore errors as it appear becuase in
ffu location we take " " and its completely normal.)
7. Run Windowsphone internals and now it will detect your phone in flash mode.
8. Now you can Flash Custom rom (if bootloader unlocked) or just flash stock ffu image (dont
need unlocked bootloader.)
Done
I will try to find more and more method to fix brick lumia until then this method is best or just
send device to service center if this didn't fixed.