Scribd Logo
Upload

Welcome to Scribd!

  • 237 views

    TS 500-2000 Example 001

    Uploaded by

    RMM
    This document summarizes an example problem from the Turkish TS 500-2000 concrete design code. It tests the flexural and shear design of a simply supported rectangular beam subjected to a uniform load. ETABS was used to calculate the flexural and shear reinforcement, which matched independent hand calculations exactly. Key outputs like moment, tension reinforcement area, shear force, and shear reinforcement area were identical between ETABS and the independent analysis.

    Copyright:

    © All Rights Reserved

    TS 500-2000 Example 001

    Uploaded by

    RMM
    237 views4 pages
    This document summarizes an example problem from the Turkish TS 500-2000 concrete design code. It tests the flexural and shear design of a simply supported rectangular beam subjected to a uniform load. ETABS was used to calculate the flexural and shear reinforcement, which matched independent hand calculations exactly. Key outputs like moment, tension reinforcement area, shear force, and shear reinforcement area were identical between ETABS and the independent analysis.

    Original Description:

    ACI 318-14 Example 002

    Copyright

    © © All Rights Reserved

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes an example problem from the Turkish TS 500-2000 concrete design code. It tests the flexural and shear design of a simply supported rectangular beam subjected to a uniform load. ETABS was used to calculate the flexural and shear reinforcement, which matched independent hand calculations exactly. Key outputs like moment, tension reinforcement area, shear force, and shear reinforcement area were identical between ETABS and the independent analysis.

    Copyright:

    © All Rights Reserved
    237 views4 pages

    TS 500-2000 Example 001

    Uploaded by

    RMM
    This document summarizes an example problem from the Turkish TS 500-2000 concrete design code. It tests the flexural and shear design of a simply supported rectangular beam subjected to a uniform load. ETABS was used to calculate the flexural and shear reinforcement, which matched independent hand calculations exactly. Key outputs like moment, tension reinforcement area, shear force, and shear reinforcement area were identical between ETABS and the independent analysis.

    Copyright:

    © All Rights Reserved
    You are on page 1of 4

    Software Verification

    PROGRAM NAME: ETABS


    REVISION NO.: 0

    TS 500-2000 Example 001


    Shear and Flexural Reinforcement Design of a Singly Reinforced Rectangle

    EXAMPLE DESCRIPTION
    The flexural and shear strength of a rectangular concrete beam is tested in this
    example.

    A simply supported beam is subjected to a uniform factored load of 36.67 kN/m.


    This example is tested using the Turkish TS 500-2000 concrete design code. The
    flexural and shear reinforcing computed is compared with independent results.

    GEOMETRY, PROPERTIES AND LOADING


    230mm
    CL A

    60 mm 550 mm

    A
    Section A-A
    6m

    Material Properties Section Properties Design Properties


    E= 25.000x106 kN/m2 d = 543.75 mm fck = 30 MPa
    ν= 0.2 fy = 420 MPa

    Clear span, L = 6000 mm


    Overall depth, h = 550 mm
    Width of beam, b = 230 mm
    Effective depth, d = 490 mm
    Concrete strength, fck = 30 MPa
    Yield strength of steel, fyk = 420 MPa
    Concrete unit weight, wc = 0 kN/m3
    Modulus of elasticity, Ec = 25x103 MPa
    Modulus of elasticity, Es = 2x105 MPa
    Poisson’s ratio, v = 0.2

    -1
    Software Verification
    PROGRAM NAME: ETABS
    REVISION NO.: 0

    TECHNICAL FEATURES TESTED


     Calculation of flexural and shear reinforcement
     Application of minimum flexural and shear reinforcement

    RESULTS COMPARISON

    Percent
    Output Parameter ETABS Independent Difference

    Design Moment, Md (kN-m) 165.02 165.02 0.00%

    Tension Reinf, As (mm2) 1022 1022 0.00%

    Design Shear, Vd (kN) 110.0 110.0 0.00%

    Shear Reinf, Asw/s (mm2/mm) 0.2415 0.2415 0.00%

    COMPUTER FILE: TS 500-2000 EX001

    CONCLUSION
    The computed results show an exact match with the independent results.

    TS 500-2000 Example 001 - 2


    Software Verification
    PROGRAM NAME: ETABS
    REVISION NO.: 0

    HAND CALCULATION

    Flexural Design
    The following quantities are computed for the load combination:
    f ck 30
    f= = = 20
    γ mc 1.5
    cd

    f yk 420
    =
    f yd = = 365
    γ ms 1.15
    ε cu Es
    cb = d = 304.6 mm
    ε cu Es + f yd
    amax = 0.85k1cb = 212.3 mm
    where, k1 = 0.85 − 0.006 ( f ck − 25 ) = 0.82 , 0.70 ≤ k1 ≤ 0.85
    0.8 f ctd
    =
    As ,min = bd 315.5 mm 2
    f yd

    0.35 f cu 0.35 30
    =
    Where f ctd = = 1.278
    γ mc 1.5

    COMB1
    ωd = 36.67 kN/m

    Md =
    ωd L2
    8
    ∙
    = 36.67 62/8 = 165.02 kN-m

    The depth of the compression block is given by:

    2 Md
    a =−
    d d2 − = 95.42 mm
    0.85 fcd b
    Compression steel not required since a < amax.

    The area of tensile steel reinforcement is given by:

    Md 165E6
    As = =
     a 365 • ( 490 − 95.41/ 2 )
    f yd  d − 
     2

    As = 1022 mm2

    TS 500-2000 Example 001 - 3


    Software Verification
    PROGRAM NAME: ETABS
    REVISION NO.: 0

    Shear Design
    The shear demand is computed as:
    ωL
    Vd = =110.0 kN at face of support for this example
    2
    The shear force is limited to a maximum of,
    = =
    Vmax 0.22 fcd Aw 496 kN
    The nominal shear strength provided by concrete is computed as:
     γN 
    =Vcr 0.65 fctd bd 1 + d
      =93.6 kN, where N d = 0
     Ag 
    = =
    Vc 0.8Vcr 74.9 kN
    The shear reinforcement is computed as follows:
    If Vd ≤ Vcr

     Asw  f ctd mm 2
    =
      =
    0.3 b 0.2415 (min. controls) (TS 8.1.5, Eqn 8.6)
     s min f ywd mm

    If Vcr ≤ Vd ≤ Vmax

    =
    Asw (=
    Vd − Vc )
    0.1962
    mm 2
    (TS 8.1.4, Eqn 8.5)
    s f ywd d mm

    TS 500-2000 Example 001 - 4

    You might also like