Scribd
Upload
50 views1 page

Frame 30 Estructura 01

This document contains the results of a steel section check using the AISC-LRFD93 standard for a beam labeled Frame 30. The beam is an HE180B section that is 6.6 meters long. The check evaluates the beam for axial force, bending moments, shear, and torsion and finds it to be within allowable limits based on the specified loads. Key calculated values are presented including demands, capacities, and demand to capacity ratios. The beam passes all design checks.

Uploaded by

Richard Felip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views1 page

Frame 30 Estructura 01

This document contains the results of a steel section check using the AISC-LRFD93 standard for a beam labeled Frame 30. The beam is an HE180B section that is 6.6 meters long. The check evaluates the beam for axial force, bending moments, shear, and torsion and finds it to be within allowable limits based on the specified loads. Key calculated values are presented including demands, capacities, and demand to capacity ratios. The beam passes all design checks.

Uploaded by

Richard Felip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project

Job Number
Engineer
SAP2000
AISC-LRFD93 STEEL SECTION CHECK
Combo : DIS2C = 1.2 D + 1.2 OPE + 1.2 T + 1.6 VY+
Units : Kgf, m, C

Frame : 30 Design Sect: HE180B


X Mid : 4.300 Design Type: Beam
Y Mid : 0.000 Frame Type : Moment Resisting Frame
Z Mid : 4.450 Sect Class : Compact
Length : 6.600 Major Axis : 0.000 degrees counterclockwise from local 3
Loc : 3.300 RLLF : 1.000

Area : 0.007 SMajor : 4.257E-04 rMajor : 0.077 AVMajor: 0.002


IMajor : 3.831E-05 SMinor : 1.514E-04 rMinor : 0.046 AVMinor: 0.004
IMinor : 1.363E-05 ZMajor : 4.810E-04 E : 20389019158
Ixy : 0.000 ZMinor : 2.310E-04 Fy : 24000000.000

STRESS CHECK FORCES & MOMENTS


Location Pu Mu33 Mu22 Vu2 Vu3 Tu
3.300 4.115 -1698.786 2120.048 3301.969 148.903 0.307

PMM DEMAND/CAPACITY RATIO


Governing Total P MMajor MMinor Ratio Status
Equation Ratio Ratio Ratio Ratio Limit Check
(H1-1b) 0.596 = 0.000 + 0.164 + 0.432 0.950 OK

AXIAL FORCE DESIGN


Pu phi*Pnc phi*Pnt
Force Capacity Capacity
Axial 4.115 102668.116 141048.000

MOMENT DESIGN
Mu phi*Mn Cm B1 B2 K L Cb
Moment Capacity Factor Factor Factor Factor Factor Factor
Major Moment -1698.786 10389.600 1.000 1.000 1.000 1.000 0.500 1.646
Minor Moment 2120.048 4906.800 1.000 1.000 1.000 1.000 0.500

SHEAR DESIGN
Vu phi*Vn Stress Status Tu
Force Capacity Ratio Check Torsion
Major Shear 3301.969 19828.800 0.167 OK 0.000
Minor Shear 148.903 54432.000 0.003 OK 0.000

D:\TRABAJO EN OFICINA - 28-01-2018\SECTOR 1\SAP2000\ESTRUCTURA - 01.sdb 01/02/2019 14:30

You might also like