CMP Products Cable Gland Catalogue

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

CMP CMP PRODUCTS CABLE GLAND CATALOGUE

CMP EXPLOSIVE ATMOSPHERES PRODUCTS

TECHNICAL DATA

E1FW Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444


Mechanical Classifications* Impact = Level 8, Retention = Class D

E1FW Globally Approved, Explosive Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category B
Atmosphere Cable Gland
ATEX Certificate SIRA13ATEX1071X, SIRA13ATEX4077X
^ II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
For all types of Steel & Aluminium Wire Code of Protection
^ II 3G Ex nR IIC Gc, ^ IM2 Ex d I Mb, Ex e I Mb
Armoured Cables Compliance Standards EN 60079-0,1,7,15,31
IECEx Certificate IECEx SIR 13.0026X, IECEx SIM 14.0007X
• Metal-to-metal armour clamping
Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
• Direct & remote installation Compliance Standards IEC 60079-0,1,7,15,31
• Displacement type flameproof inner seal cCSAus Certificate 1310517
• Controlled outer ‘load retention’ seal Ex d IIC; Ex e II; Ex nR II; Class I, Div 2, Groups A,B,C,D, Class II, Div 2 Groups E,F,G, Class
Code of Protection
III, Encl Type T4X Class I, Zone 1, AEx e II / AEx nR II
• Unique OSTG prevents overtightening Compliance Standards
CAN/CSA-C22.2 No 0,18,25,30,174,94, CAN/CSA-E60079-0,1,7,15
ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0,1,7,15
• Designed to prevent Coldflow EAC Certificate
TC RU C-GB.ГБ05.B00138
(Formerly GOST R, K & B)
• -60˚C to +130˚C KCC Certificate 14-GA4BO-0257X
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 2 ABCD CCOE / PESO (India) Certificate P333688

• Globally marked, IECEx, ATEX & cCSAus NEPSI Certificate GYJ13.1140X / GYJ13.1282X

• EMC tested INMETRO Approval TÜV 12.0618X


RETIE Approval Number 03866
Marine Approvals LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA
Ingress Protection Rating IP66 as standard (IP67, IP68 available upon request)**
Deluge Protection Compliance DTS01:91 option available on request (white ferrule for identification purposes)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
Note : ** Refer to page 7 or www.cmp-products.com for further information on Ingress Protection Ratings

Cable Gland Selection Table


Refer to illustration at the top of the page
Available Entry Threads “C” Cable Overall
Across Across Combined Ordering
(Alternate Metric Thread Lengths Available) Bedding Cable Armour
Flats Corners Reference Cable
Cable Diameter Diameter Range Protrusion
Standard Option “D” “D” (*Brass Metric) Gland
Gland “A” “B” Length Shroud
Weight
Size Thread “F”
Thread Length Ordering (Kgs)
Metric NPT Length (NPT) NPT Min Max Min Max Min Max Max Max Size Type
(Metric) “E” Suffix
“E”
20s16 M20 15.0 1/2” 19.9 3/4” 3.1 8.6 6.1 13.1 0.8 1.25 24.0 26.4 72.5 20S16 E1FW 1RA PVC04 0.16
20S M20 15.0 1/2” 19.9 3/4” 6.1 11.6 9.5 15.9 0.8 1.25 24.0 26.4 70.0 20S E1FW 1RA PVC04 0.15
20 M20 15.0 1/2” 19.9 3/4” 6.5 13.9 12.5 20.9 0.8 1.25 30.5 33.6 73.0 20 E1FW 1RA PVC06 0.21
25S M25 15.0 3/4” 20.2 1” 11.1 19.9 14.0 22.0 1.25 1.6 37.5 41.3 89.0 25S E1FW 1RA PVC09 0.33
25 M25 15.0 3/4” 20.2 1” 11.1 19.9 18.2 26.2 1.25 1.6 37.5 41.3 89.0 25 E1FW 1RA PVC09 0.33
32 M32 15.0 1” 25.0 1 1/4” 17.0 26.2 23.7 33.9 1.6 2.0 46.0 50.6 86.0 32 E1FW 1RA PVC11 0.43
40 M40 15.0 1 1/4” 25.6 1 1/2” 22.0 32.1 27.9 40.4 1.6 2.0 55.0 60.5 90.0 40 E1FW 1RA PVC15 0.62
50S M50 15.0 1 1/2” 26.1 2” 29.5 38.1 35.2 46.7 2.0 2.5 60.0 66.0 91.0 50S E1FW 1RA PVC18 0.75
50 M50 15.0 2” 26.9 2 1/2” 35.6 44.0 40.4 53.0 2.0 2.5 70.1 77.1 95.0 50 E1FW 1RA PVC21 0.95
63S M63 15.0 2” 26.9 2 1/2” 40.1 49.9 45.6 59.4 2.0 2.5 75.0 82.5 102.0 63S E1FW 1RA PVC23 1.34
63 M63 15.0 2 1/2” 39.9 3” 47.2 55.9 54.6 65.8 2.0 2.5 80.0 88.0 104.0 63 E1FW 1RA PVC25 1.34
75S M75 15.0 2 1/2” 39.9 3” 52.8 61.9 59.0 72.0 2.0 2.5 90.0 99.0 115.0 75S E1FW 1RA PVC28 2.11
75 M75 15.0 3” 41.5 3 1/2” 59.1 67.9 66.7 78.4 2.5 3.0 100.0 110.0 117.0 75 E1FW 1RA PVC30 2.42
90 M90 24.0 3 1/2” 42.8 4” 66.6 78.6 76.2 90.3 3.15 4.0 114.3 125.4 147.0 90 E1FW 1RA PVC32 4.21
100 M100 24.0 4” 44.0 5” 76.0 90.9 86.1 101.4 3.15 4.0 123.0 135.3 140.0 100 E1FW 1RA LSF33 4.45
115 M115 24.0 4” 44.0 5” 86.0 97.9 101.5 110.2 3.15 4.0 133.4 146.7 162.0 115 E1FW 1RA LSF34 6.19
130 M130 24.0 5” 46.8 6” 97.0 114.9 110.2 123.2 3.15 4.0 152.4 167.6 174.0 130 E1FW 1RA LSF35 8.34
*Note : For material options please add the following suffix to change the Ordering Reference ; Brass (no suffix required), Nickel Plated Brass “5”, Copper Free Aluminium “1”
For NPT options please add the following digits to the material suffix ; 1/2” = 31, 3/4” = 32, 1” = 33, 1 1/4” = 34, 1 1/2” = 35, 2” = 36, 2 1/2” = 37, 3” = 38,3 1/2” = 39, 4” = 310 (Brass requires prefix “0”)
Examples: 32E1FW1RA534 = Nickel Plated Brass 1-1/4” NPT, 50SE1FW1RA035 = Brass 1-1/2” NPT, 20E1FW1RA5 = Nickel Plated Brass M20
Dimensions are displayed in millimetres unless otherwise stated

TDS547 ISSUE7 08/15 www.cmp-products.com

You might also like