A1

REVISION DESCRIPTION DATE

Project: Drawn By: K Coleman

Dressing Rooms Checked By: M Shinnors

Date: June 2016

Address: Newport AFC Roundhouse, Cooneen, Portroe, Nenagh, County Tipperary Scale: As Indicated A1

File: newport_TD_1_1.dwg

Drawing: DRAWING NO.

Member of The Royal Institute of the Architects of Ireland
Site Layout Plans
& Cross Sections
Tel: 067 34995 - Mob: 087 9875127
E-mail: [email protected]
Registered Architect:
Reg. No. 13081
TD-01
VAT No. 8321128M
PROJECT NO.
????
 A1 Ridge 109.535m Ridge 109.535m Ridge 109.535m NOTES:

GENERAL:
ue Black slates, by Tegral or similar Slated roofs to be of Thrutone Blue Black slates, by Tegral or similar ALL FINISHES AND FITTINGS TO BE AGREED WITH CLIENT.
verges & permanent proprietary over approved, with dry-fixed ridge & verges & permanent proprietary over
oughout, on 50mm x 35mm treated facia & ridge level ventilation throughout, on 50mm x 35mm treated ALL HABITABLE ROOMS TO BE VENTILATED.
ble roofing underlay on Ex 200x50mm timber cross battens on breathable roofing underlay on Ex 200x50mm
s @ 400mm ctrs, on treated timber wall Grade C18 treated timber rafters @ 400mm ctrs, on treated timber wall PROVIDE FOR THE CONTAINMENT OF RADON GAS IN ACCORDANCE
d wall plate straps along verges & plates with proprietary galvanised wall plate straps along verges & WITH CURRENT BUILDING REGULATIONS.
1780x780mm VELUX "INTEGRA" manually operated
18 treated timber ceiling joists @ eaves & Ex 200x50mm Grade C18 treated timber ceiling joists @ GGL306021U Pine framed rooflighst with --60 Pane
proprietary slating edge trim. 400mm ctrs. All verges to have proprietary slating edge trim. ALL STRUCTURAL TIMBERS TO COMPLY WITH SR 11 TABLES.
glazing and BDX Insulation Collar. 2 Nr indicated to
serve as emergency escape windows
Emergency Escape Rooflight ALL WORK TO BE CARRIED OUT AND ALL MATERIALS USED TO
COMPLY WITH CURRENT BUILDING REGULATIONS.

Black uPVC Gutters & Downpipes Emergency Escape Rooflight DO NOT SCALE FROM THIS DRAWING.
F.F.L. 104.090m F.F.L. 104.090m
Eaves Level 103.890m Eaves Level 103.890m Eaves Level 103.890m BUILDER IS TO TAKE RESPONSIBILITY FOR ALL ASPECTS OF SAFETY
ON SITE IN ACCORDANCE WITH CURRENT SAFETY AND HEALTH
Black uPVC Gutters & Downpipes REGULATIONS.
External Render to be of light napp plaster
hs all around finish & smooth plastered plinths all around Frosted glass to all shower & COPYRIGHT TO ALL DRAWINGS REMAIN THE PROPERTY OF MARTIN
dressing room windows throughout SHINNORS ARCHITECT.
External windows & doors to be
uPVC, double glazed, as per schedule N.B. PLEASE REVIEW THE ENCLOSED DRAWINGS CAREFULLY
BEFORE WORK BEGINS ON SITE AND ANY DISCREPENCIES OR
F.F.L. 100.840m F.F.L. 100.840m F.F.L. 100.840m
F.G.L. 100.690m F.G.L. 100.690m F.G.L. 100.690m PROBLEMS RELATING TO THE DRAWINGS OR THE BUILDING WORKS
CONTAINED WITHIN THE DRAWINGS SHOULD BE BROUGHT TO THE
ATTENTION OF THE SUPERVISING ARCHITECT.

FOUNDATIONS
THE FOUNDATIONS MUST HAVE AT LEAST A MINIMUM WIDTH
EQUAL TO THREE TIMES THE THICKNESS OF THE WALL IT IS
SUPPORTING. THE MINIMUM DEPTH OF FOUNDATION EXCAVATION
BELOW FINISHED GROUND LEVEL TO BE 900mm
THE MINIMUM THICKNESS OF CONCRETE TO BE 350mm. ENSURE
THAT ALL BLOCKWORK WALLS ARE BUILT FROM A FOUNDATION.
THE SPECIFICATIONS FOR THE ABOVE ARE BASED ON NORMAL
A B GROUND CONDITIONS

GROUND FLOOR SLAB

USE GOOD QUALITY HARDCORE EG. CLEAN, WELL GRADED BROKEN
STONE, 100mm MAX SIZE. COMPACTED IN LAYERS NOT EXCEEDING
225mm IN DEPTH. & BLINDED WITH A 50mm COVERING OF SAND.
External Windows: A DAMP PROOF MEMBEANE OF AT LEAST 1200 GAUGE MATERIAL TO
W12 W13 W14 W15 W16 W17 W18 W19 W20
External windows & doors to be double glazed uPVC with BE LAID, WITH JOINTS LAPPED AND SEALED. 100mm HIGH DENSITY
precast concrete cills with 100mm deep front faces. All RIGID INSLUATION TO BE PLACED ON TOP OF DAMP PROOF
lintels, unless noted otherwise, to be proprietary insulated MEMBRANE WITH 25mm HIGH DENSITY INSULATION TO BE PLACED
steel lintels by Steelite or similar approved. Internal Doors: ALONG EDGE OF FLOOR SLAB.
C2

All internal doors are to be oak veneered

with solid oak veneer panels, to matching RADON PROTECTION
Steel beams to Engineer's details timber frames with NO saddle to floor A SUMP MUST BE PROVIDED WITH CONNECTING PIPEWORK
thresholds. TERMINATIONG AND CAPPED AT SUITABLE POINTS OUTSIDE THE
EXTERNAL WALLS OF THE DWELLING. IN SITUATIONS WHERE THE
External Walls: W11 RADON LEVEL IS UNACCEPTABLY HIGH, AN APPROVED RADON
BARRIER OF LOW PERMEABILITY SHOULD ALSO BE USED.
All external cavity blockwork walls to be 350mm wide
typically, with 100mm thick solid blockwork rendered outer
FD30S Boiler Showers WC Showers WC WC Showers WC Showers Internal Floor Finishes:
Floors of changing rooms, lobby, shower areas CAVITY WALLS
leaf, painted to selected colour, 150mm wide cavity, W21 & toilets are to be leveled, as required, & tiled
including 100mm thick high density Kingspan "ThermaWall CAVITY BLOCKWORK CONSTRUCTION TO CONSIST OF 100mm
with non-slip floor tiles. INNER BLOCKWORK LEAF, 150mm CAVITY AND 100mm OUTER
TW50" partial cavity fill insulation board or similar approved, S6 S7 S8 S9
with 100mm thick solid blockwork fair-faced inner leaf. BLOCKWORK LEAF. 100mm THERMAWALL TW100 HIGH DENSITY
External wall cavities MUST be kept clear for between Internal Wall & Ceiling Finishes: INSULATION TO BE PLACED FIRMLY AGAINST OUTER FACE OF INNER
All internal walls & ceilings to be cleaned down, LEAF AND HELD IN POSITION WITH STAINLESS STEEL WALL TIES
150mm & 225mm below DPC level.
Storage prepped, sealed & painted with washable internal FITTED WITH INSULATION RETAINERS. ENSURE THAT CAVITY IS
grade, durable paint to selected colour. All KEPT CLEAR FOR BETWEEN 150mm AND 225mm BELOW DPC LEVEL.
internal joinery to be undercoated & then receive ALL WINDOW OPES TO HAVE A FULL DPC "WRAP" PLACED AT
1:12 gradient concrete
two coats of white satinwood paint HEADS, JAMBS AND CILLS.
ramp to threshold
Bench Seating: ROOF
Floor of Storage area to receive 2 coats of floor paint, walls Bench seating to be of smooth sanded & stained ADEQUATE TRIANGULATION OF THE ROOF SHOULD BE ACHIEVED
to be dust sealed & ceiling to receive 2 coats of paint to W10 hardwood laths. with all arises & sharp edges LEGEND: AT ALL TIMES. 100 x 75mm WALLPLATE TO BE FIXED TO TOP OF
selected colour. removed, screw-fixed to powder-coated mild SUPPORTING WALL WITH GALVANISED STRAPS AT 1.8m CENTRES.
Changing Changing Changing Changing ALL ROOF TIMBERS TO BE TREATED, WITH RAFTERS & CEILING
C2

steel brackets, which are to be secured to walls Solid Blockwork Walls

Storage Room 3 Room 4 Storage with anchor bolts JOISTS SET AT 400mm CENTRES. TIMBER PURLINS SHOULD BE
Room 1 Room 2 PROPPED AT REGULAR INTERVALS. COLLARS TO BE PLACED AT
1600mm CENTRES. VENTILATION TO ROOF SPACE SHOULD BE
Ground Floor Slab: 1:12 gradient concrete
ramp to threshold External Door/Window Schedule Ref ACHIEVED BY PROVIDING THE EQUIVALANT OF 10mm CONTINUOUS
150mm thick, mesh reinforced, power floated concrete W23
STRIP AT EAVES LEVEL.

ACO-Drain
floor (to 3-4mm tolerance), on 150mm rigid board
insulation, to minimum thermal conductivity 0.018 W/m.K. External Doors: FIRE SAFETY AND PREVENTION
Minimum 25mm thick rigid board insulation to floor slab W22 All external doors, except glazed uPVC double S3
WC Internal Door Schedule Ref EVERY BEDROOM SHOULD HAVE A WINDOW WHICH CAN BE USED
ACO-Drain

perimeter with 1200 gauge DPM on 50mm blinding on Min doors to main entrance lobby, are to be of solid AS AN ALTERNATIVE MEANS OF ESCAPE. AN ESCAPE WINDOW
225mm well compacted 50mm down hardcore. S11 hardwood, with matching frames, with secure NEEDS TO PROVIDE A CLEAR OPENABLE AREA OF 0.33sq/m WHICH
W9 S10 Steel Post Legend:
locking mechanism & TG&V vertical boarding to SHOULD INCLUDE A MINIMUM WIDTH OR HEIGHT OF 450mm. THE
panels & double glazed night light panels overhead Painted SHS corner post, anchored via BOTTOM OF THE WINDOW OPENING MUST BE NOT MORE THAN

C1
Internal Walls:
baseplate to foundation all to Engineer's details 1100mm AND NOT LESS THAN 800mm (600mm IN THE CASE OF
Internal walls to be unrendered, fair-faced blockwork,
Floor of Storage area to receive 2 coats of ROOFLIGHTS) ABOVE FLOOR LEVEL. A MAINS OPERATED FIRE
with pointed mortar joints, clear of snots, sealed &
floor paint, walls to be dust sealed & ceiling DETECTION AND ALARM SYSTEM MUST BE PROVIDED. BATTERY
painted to selected colour. Internal ceilings to receive Painted UB Column, anchored via baseplate OPERATED SYSTEMS ARE NOT ACCEPTABLE.

C2
to receive 2 coats of paint to selected colour.
ACO-Drain

3mm thick skim plaster finish on 12.5mm plasterboard, to foundation all to Engineer's details
painted to selected colour. S13 DISABLED ACCESS
W8 Seating S12 Seating Painted steel beam
Beam WHEELCAHIR ACCESS TO BE PROVIDED IN ACCORDANCE WITH
All abled-bodied WC's are to receive vandal-proof wash Disabled to Engineer's details
PART M OF THE TECHNICAL GUIDANCE DOCUMENTS 2010.
handbasin, wc pan & cistern, as well as 1 nr electric hand
dryers. All wash hand basins & wc cisterns are to be wall WC
mounted. Disable WC is to receive a full DOC M
sanitaryware pack including all related handrails etc, as
C2

well as 1 nr electric hand dryer C Hallway Wall with inner lobby doors to
have timber stud partition with S15 C
S5
S4 F.F.L. 100.840m skimmed plasterboard to each face S14
W7 W6 W5
Internal Stairs:
1:12 gradient concrete Internal staircase to be of cast in-situ or precast
ramp to threshold concrete, with non-slip finish to threads, to
architect's approval, with toe inserts. Landings,
balusters, handrails, and step rise and going must
W27
C1

comply with the current Technical Guidance

C1

W4
External Paths: Up Document Part K for stairs.

Pathway areas to be of 100mm thick mesh reinforced Screen Windows:

Full height glazed units to be of double glazed uPVC windows & W26 W28 W23
concrete, on 75mm sand & cement lean mix blinding, W3
except where noted otherwise. All grassed areas to be double doors, fixed to steel posts to Engineer's sizes, with
soil-prepared, seeded & ready for lawns. precast concrete cills with 100mm deep front faces to screens &
level access door threshold as detailed. All lintels, unless noted
C1

C1
C1

otherwise, to be proprietary insulated steel lintels by Steelite or

Underside of Covered Area: Steel beams to Engineer's details
similar approved. Lintels between steel posts, supporting glazed
Soffit to have an external smooth plaster finish on Ridge 109.535m
screens, to be of primed & painted structural steel angle sections, W24
12.5mm thick cement board screw-fixed to Ex 150x50mm or similar, to Engineers details
treated timber framework, fixed to underside of precast W2 Entrance Slated roofs to be of
floor slab units, filled with 150mm of HD insulation. Soffit
to be painted to selected colour.
Covered Area Lobby Thrutone Blue Black slates,
by Tegral or similar approved

ACO-Drain
C2

C2

C2

C2
External Blockwork Piers: Automatically Operated Vent
Piers to consist of painted, rendered 100mm thick (A.O.V.) rooflight over
blockwork wrapped around structural steel columns to stairwell, with 1.5m2 openable
Engineer's details
W1 area & connected to Fire
Emergency Escape Rooflight Alarm System for smoke
ventilation in the case of fire
A
Black uPVC Gutters & Downpipes
1:12 gradient concrete Eaves Level 103.890m
ramp to threshold
B External Render to be of light
napp plaster finish & smooth
Main Entrance, Disabled WC & plastered plinths all around
Store Room to have level access
provided, with a 1:12 gradient External windows & doors
concrete ramp to threshold to be uPVC, double glazed,
as per schedule
F.G.L. 100.690m

REVISION DESCRIPTION DATE

Project: Drawn By: K Coleman

Dressing rooms Checked By: M Shinnors

Date: June 2016

Address: Newport AFC Roundhouse, Cooneen, Portroe, Nenagh, County Tipperary Scale: As Indicated A1

File: newport_TD_1_1.dwg

Drawing: DRAWING NO.

Member of The Royal Institute of the Architects of Ireland
Elevations &
Ground Floor Plan
Tel: 067 34995 - Mob: 087 9875127
E-mail: [email protected]
Registered Architect:
Reg. No. 13081
TD-02
VAT No. 8321128M
PROJECT NO.
???
A1 NOTES:
1780x780mm VELUX "INTEGRA" manually operated GGL306021U
GENERAL:
Pine framed rooflighst with --60 Pane glazing and BDX Insulation
Black uPVC Gutters & Downpipes ALL FINISHES AND FITTINGS TO BE AGREED WITH CLIENT.
Collar. 2 Nr indicated to serve as emergency escape windows
ALL HABITABLE ROOMS TO BE VENTILATED.

Slated roofs to be of Thrutone Blue Black slates, by PROVIDE FOR THE CONTAINMENT OF RADON GAS IN ACCORDANCE
Tegral or similar approved, with dry-fixed ridge & WITH CURRENT BUILDING REGULATIONS.
verges & permanent proprietary over facia & ridge
level ventilation throughout, on 50mm x 35mm LEGEND: ALL STRUCTURAL TIMBERS TO COMPLY WITH SR 11 TABLES.
treated timber cross battens on breathable roofing
underlay on Ex 200x50mm Grade C18 treated timber ALL WORK TO BE CARRIED OUT AND ALL MATERIALS USED TO
Solid Blockwork Walls COMPLY WITH CURRENT BUILDING REGULATIONS.
rafters @ 400mm ctrs, on treated timber wall plates
with proprietary galvanised wall plate straps along
verges & eaves & Ex 200x50mm Grade C18 treated DO NOT SCALE FROM THIS DRAWING.
Emergency Emergency
Escape Escape timber ceiling joists @ 400mm ctrs. All verges to External Door/Window Schedule Ref W23
Roof Roof have proprietary slating edge trim. BUILDER IS TO TAKE RESPONSIBILITY FOR ALL ASPECTS OF SAFETY
Rooflight Rooflight
Light Light ON SITE IN ACCORDANCE WITH CURRENT SAFETY AND HEALTH
REGULATIONS.
Internal Door Schedule Ref S3
COPYRIGHT TO ALL DRAWINGS REMAIN THE PROPERTY OF MARTIN
SHINNORS ARCHITECT.
Steel Post Legend:
Painted SHS corner post, anchored via N.B. PLEASE REVIEW THE ENCLOSED DRAWINGS CAREFULLY

C1
baseplate to foundation all to Engineer's details BEFORE WORK BEGINS ON SITE AND ANY DISCREPENCIES OR
Internal Wall & Ceiling Finishes: PROBLEMS RELATING TO THE DRAWINGS OR THE BUILDING WORKS
All internal walls & ceilings to be cleaned down, CONTAINED WITHIN THE DRAWINGS SHOULD BE BROUGHT TO THE
Painted UB Column, anchored via baseplate ATTENTION OF THE SUPERVISING ARCHITECT.

C2
prepped, sealed & painted with washable internal
to foundation all to Engineer's details
grade, durable paint to selected colour. All
FOUNDATIONS
internal joinery to be undercoated & then receive Painted steel beam
Beam THE FOUNDATIONS MUST HAVE AT LEAST A MINIMUM WIDTH
two coats of white satinwood paint to Engineer's details EQUAL TO THREE TIMES THE THICKNESS OF THE WALL IT IS
SUPPORTING. THE MINIMUM DEPTH OF FOUNDATION EXCAVATION

C1
C1

C1
Internal Doors: BELOW FINISHED GROUND LEVEL TO BE 900mm
All internal doors are to be oak veneered THE MINIMUM THICKNESS OF CONCRETE TO BE 350mm. ENSURE
Entire First Floor deck to consist of 100mm thick with solid oak veneer panels, to matching THAT ALL BLOCKWORK WALLS ARE BUILT FROM A FOUNDATION.
100x100mm SHS structural steel columns to Engineer's
precast concrete "wideslab" units, with 125mm thick timber frames with NO saddle to floor THE SPECIFICATIONS FOR THE ABOVE ARE BASED ON NORMAL
details, supporting Treated timber purlins under rafters.
cast in-situ concrete, reinforced concrete screed thresholds. GROUND CONDITIONS
Columns to be fixed to 8mm thick base plates, fixed to
concrete screed with anchor bolts (sized to Engineer's over & skimmed 12.5mm thick plasterboarding to
details), in a 40mm deep, sunken pocket in the screed. sofft, on Ex 38x38mm treated timber battens, GROUND FLOOR SLAB
Exposed pocket is to be filled with non-shrink grout shot-fixed into soffit of precast units. S13 S14 External windows & doors to be uPVC, USE GOOD QUALITY HARDCORE EG. CLEAN, WELL GRADED BROKEN
W25 double glazed, as per schedule STONE, 100mm MAX SIZE. COMPACTED IN LAYERS NOT EXCEEDING
upon completion of the works
225mm IN DEPTH. & BLINDED WITH A 50mm COVERING OF SAND.
Ridge Line Overhead Dn A DAMP PROOF MEMBEANE OF AT LEAST 1200 GAUGE MATERIAL TO
BE LAID, WITH JOINTS LAPPED AND SEALED. 100mm HIGH DENSITY
External Render to be of light napp plaster RIGID INSLUATION TO BE PLACED ON TOP OF DAMP PROOF
finish & smooth plastered plinths all around MEMBRANE WITH 25mm HIGH DENSITY INSULATION TO BE PLACED
ALONG EDGE OF FLOOR SLAB.
Internal Floor Finishes:
Storage & Committee Meetings Room F.F.L. 104.090m Upstairs Area to have industrial grade RADON PROTECTION
A SUMP MUST BE PROVIDED WITH CONNECTING PIPEWORK
carpeting, on underlay, to selected colour
TERMINATIONG AND CAPPED AT SUITABLE POINTS OUTSIDE THE
EXTERNAL WALLS OF THE DWELLING. IN SITUATIONS WHERE THE
Internal Stairs:
RADON LEVEL IS UNACCEPTABLY HIGH, AN APPROVED RADON
Internal staircase to be of cast in-situ or precast
BARRIER OF LOW PERMEABILITY SHOULD ALSO BE USED.
concrete, with non-slip finish to threads, to
architect's approval, with toe inserts. Landings, CAVITY WALLS
balusters, handrails, and step rise and going must CAVITY BLOCKWORK CONSTRUCTION TO CONSIST OF 100mm
comply with the current Technical Guidance

C1
C1

C1
INNER BLOCKWORK LEAF, 150mm CAVITY AND 100mm OUTER
Document Part K for stairs. BLOCKWORK LEAF. 100mm THERMAWALL TW100 HIGH DENSITY
INSULATION TO BE PLACED FIRMLY AGAINST OUTER FACE OF INNER
LEAF AND HELD IN POSITION WITH STAINLESS STEEL WALL TIES
A.O.V.:
FITTED WITH INSULATION RETAINERS. ENSURE THAT CAVITY IS
Stairway to have 1.5m smoke vent at KEPT CLEAR FOR BETWEEN 150mm AND 225mm BELOW DPC LEVEL.
ceiling level extracting smoke to outside air ALL WINDOW OPES TO HAVE A FULL DPC "WRAP" PLACED AT
through roof covering . ventilation to HEADS, JAMBS AND CILLS.
comply with bs 5588-9:1999
ROOF
ADEQUATE TRIANGULATION OF THE ROOF SHOULD BE ACHIEVED
AT ALL TIMES. 100 x 75mm WALLPLATE TO BE FIXED TO TOP OF
SUPPORTING WALL WITH GALVANISED STRAPS AT 1.8m CENTRES.
ALL ROOF TIMBERS TO BE TREATED, WITH RAFTERS & CEILING
JOISTS SET AT 400mm CENTRES. TIMBER PURLINS SHOULD BE
PROPPED AT REGULAR INTERVALS. COLLARS TO BE PLACED AT
1600mm CENTRES. VENTILATION TO ROOF SPACE SHOULD BE
ACHIEVED BY PROVIDING THE EQUIVALANT OF 10mm CONTINUOUS
STRIP AT EAVES LEVEL.

FIRE SAFETY AND PREVENTION

EVERY BEDROOM SHOULD HAVE A WINDOW WHICH CAN BE USED
AS AN ALTERNATIVE MEANS OF ESCAPE. AN ESCAPE WINDOW
NEEDS TO PROVIDE A CLEAR OPENABLE AREA OF 0.33sq/m WHICH
SHOULD INCLUDE A MINIMUM WIDTH OR HEIGHT OF 450mm. THE
BOTTOM OF THE WINDOW OPENING MUST BE NOT MORE THAN
1100mm AND NOT LESS THAN 800mm (600mm IN THE CASE OF
ROOFLIGHTS) ABOVE FLOOR LEVEL. A MAINS OPERATED FIRE
DETECTION AND ALARM SYSTEM MUST BE PROVIDED. BATTERY
OPERATED SYSTEMS ARE NOT ACCEPTABLE.

DISABLED ACCESS
WHEELCAHIR ACCESS TO BE PROVIDED IN ACCORDANCE WITH
PART M OF THE TECHNICAL GUIDANCE DOCUMENTS 2010.

Showers Showers Showers Showers T

S
T
WC WC WC WC S
Boiler

Storage T T T T

Changing Changing
S Room 2 Room 3
T

T
T

Storage
Storage
T

T
T

Changing T

WC Room 1 Changing S
S S Room 4 Storage & Committee Meetings Room S
T

S S
T

T
T

S S
T

Disabled
T
Seating Seating
T F.F.L. 104.090m
WC All Dressing Room light fittings to
T
be vapour resistant & vandal proof
S S
A.O.V.:
E Hallway
Stairway to have 1.5m smoke vent at E
All Dressing Room radiators are to ceiling level extracting smoke to outside
F.F.L. 100.840m
be low level under-seat mounted T
air through roof covering . ventilation to
comply with bs 5588-9:1999
Up T T T

All external light fittings wall mounted at 1.8m above ffl on wall panels, 2.3m above ffl over door opes

All permanent ventilation is to be provided by means of a proprietary system of grilles & ducts. The use of wavin
pipework off-cuts through external is not permitted.
Entrance
Lobby The Electrical Sub-Contractor is to provide all necessary to complete the electrical installation in accordance with all
current regulations & guidance documents.

The Mechanical Sub-Contractors are to provide all necessary to complete the mechanical installations, in
accordance with all current regulations & guidance documents.

REVISION DESCRIPTION DATE

Project: Drawn By: K Coleman

Dressing rooms Checked By: M Shinnors

Date: June 2016

Address: Newport AFC Roundhouse, Cooneen, Portroe, Nenagh, County Tipperary Scale: As Indicated A1

File: newport_TD_1_1.dwg

Drawing: DRAWING NO.

Member of The Royal Institute of the Architects of Ireland
Elevations &
Ground Floor Plan
Tel: 067 34995 - Mob: 087 9875127
E-mail: [email protected]
Registered Architect:
Reg. No. 13081
TD-02
VAT No. 8321128M
PROJECT NO.
???
A1
Ridge 109.535m Ridge 109.535m

Roof Finishes:
Slated roofs to be of Thrutone Blue Black slates, by Tegral or similar
approved, with dry-fixed ridge & verges & permanent proprietary over Ground Floor Slab:
facia & ridge level ventilation throughout, on 50mm x 35mm treated 150mm thick, mesh reinforced, power floated concrete
timber cross battens on breathable roofing underlay on Ex 200x50mm floor (to 3-4mm tolerance), on 150mm rigid board
Grade C18 treated timber rafters @ 400mm ctrs, on treated timber insulation, to minimum thermal conductivity 0.018 W/m.K.
wall plates with proprietary galvanised wall plate straps along verges Minimum 25mm thick rigid board insulation to floor slab
& eaves & Ex 200x50mm Grade C18 treated timber ceiling joists @ perimeter with 1200 gauge DPM on 50mm blinding on Min
400mm ctrs. All verges to have proprietary slating edge trim. Attic 225mm well compacted 50mm down hardcore. Attic

First Floor Level Steel Columns: Internal Walls:

100x100mm SHS structural steel columns to Engineer's details, Internal walls to to First Floor Level to be unrendered, fair-faced blockwork,
supporting Treated timber purlins under rafters. Columns to be fixed to with pointed mortar joints, clear of snots, sealed & painted to selected F.F.L. 15.596m
8mm thick base plates, fixed to concrete screed with anchor bolts colour. Internal ceilings to receive 3mm thick skim plaster finish on 12.5mm
(sized to Engineer's details), in a 40mm deep, sunken pocket in the plasterboard, painted to selected colour.
screed. Exposed pocket is to be filled with non-shrink grout upon
completion of the works
Rooflights:
1780x780mm VELUX "INTEGRA" manually operated GGL306021U External Walls:
Pine framed rooflighst with --60 Pane glazing and BDX Insulation All external cavity blockwork walls to be 350mm wide typically, with 100mm
Storage & Committee Meetings Room Storage & Committee Meetings Room
Collar. 2 Nr indicated to serve as emergency escape windows thick solid blockwork rendered outer leaf, painted to selected colour, 150mm
wide cavity, including 100mm thick high density Kingspan "ThermaWall TW50"
First Floor Slab: partial cavity fill insulation board or similar approved, with 100mm thick solid
Entire First Floor deck to consist of 100mm thick precast concrete blockwork fair-faced inner leaf. External wall cavities MUST be kept clear for
"wideslab" units, with 125mm thick cast in-situ concrete, between 150mm & 225mm below DPC level.
reinforced concrete screed over & skimmed 12.5mm thick
Black uPVC gutters, downpipes, fascias & soffits
plasterboarding to sofft, on Ex 38x38mm treated timber battens,
shot-fixed into soffit of precast units. Void Underside of Covered Area: Void Void
Void
Soffit to have an external smooth plaster finish on 12.5mm thick cement board
F.F.L. 104.090m F.F.L. 104.090m
screw-fixed to Ex 150x50mm treated timber framework, fixed to underside of
Eaves Level 103.890m Eaves Level 103.890m
precast floor slab units, filled with 150mm of HD insulation. Soffit to be painted
External Windows: to selected colour. Boxing out around steel beam to be of plastered cement
External windows & doors to be double glazed uPVC with board on proprietary fixing system supported off the steel beam
precast concrete cills with 100mm deep front faces. All
External Blockwork Piers:
lintels, unless noted otherwise, to be proprietary insulated
Piers to consist of painted, rendered 100mm thick blockwork wrapped around
steel lintels by Steelite or similar approved.
structural steel columns to Engineer's details

Internal Wall & Ceiling Finishes: Screen Windows:

All internal walls & ceilings to be cleaned down, prepped, Full height glazed units to be of double glazed uPVC windows & double doors,
Changing fixed to steel posts to Engineer's sizes, with precast concrete cills with 100mm
sealed & painted with washable internal grade, durable paint Room 1 Showers Changing Room 2
to selected colour. All internal joinery to be undercoated & deep front faces to screens & level access door threshold as detailed. All lintels,
then receive two coats of white satinwood paint unless noted otherwise, to be proprietary insulated steel lintels by Steelite or
Showers similar approved. Lintels between steel posts, supporting glazed screens, to be of
External Render to be of light napp plaster finish & smooth primed & painted structural steel angle sections, or similar, to Engineers details
plastered plinths all around 1:12 gradient concrete
All entrance & exit doors to have "level access" throughout c/w proprietary
Internal Floor Finishes: Aco-Drainage channels laid 15mm below F.F.L. connected to new storm sewer system. ramp to threshold
Upstairs Area to have industrial grade carpeting, on underlay,
to selected colour F.F.L. 100.840m F.F.L. 100.840m F.G.L. 100.825m
F.G.L. 100.690m F.G.L. 100.690m F.G.L. 100.690m

External Paths:
Pathway areas to be of 100mm thick mesh reinforced concrete, on 75mm sand
& cement lean mix blinding, except where noted otherwise. All grassed areas to
be soil-prepared, seeded & ready for lawns.

Foundations: Ground Floor Slab:

All foundations to be 350mm deep, grade C28/35 in-situ 150mm thick, mesh reinforced, power floated concrete
concrete strip footings, to a min depth of 900mm below floor (to 3-4mm tolerance), on 150mm rigid board
Finished Ground Level, with 12mm diameter reinforcing mesh insulation, to minimum thermal conductivity 0.018 W/m.K.
to base, min of 50mm cover under & min 600mm laps. Minimum 25mm thick rigid board insulation to floor slab
perimeter with 1200 gauge DPM on 50mm blinding on Min
225mm well compacted 50mm down hardcore.

Ridge 109.535m

Roof Finishes:
Slated roofs to be of Thrutone Blue Black slates, by
Tegral or similar approved, with dry-fixed ridge &
verges & permanent proprietary over facia & ridge
level ventilation throughout, on 50mm x 35mm
treated timber cross battens on breathable roofing
underlay on Ex 200x50mm Grade C18 treated timber
rafters @ 400mm ctrs, on treated timber wall plates
with proprietary galvanised wall plate straps along
verges & eaves & Ex 200x50mm Grade C18 treated
timber ceiling joists @ 400mm ctrs. All verges to
External Walls: have proprietary slating edge trim.
All external cavity blockwork walls to be 350mm wide
typically, with 100mm thick solid blockwork rendered outer
leaf, painted to selected colour, 150mm wide cavity, A.O.V.:
including 100mm thick high density Kingspan "ThermaWall Stairway to have 1.5m smoke vent at ceiling
TW50" partial cavity fill insulation board or similar approved, level extracting smoke to outside air through
with 100mm thick solid blockwork fair-faced inner leaf. roof covering . ventilation to comply with bs
External wall cavities MUST be kept clear for between 5588-9:1999
150mm & 225mm below DPC level.

Internal Stairs:
Emergency Roof Roof Emergency Internal staircase to be of cast in-situ or precast
Internal Walls: Escape Light Light Escape concrete, with non-slip finish to threads, to
Internal walls to be unrendered, fair-faced blockwork, Rooflight Rooflight architect's approval, with toe inserts. Landings,
with pointed mortar joints, clear of snots, sealed & Storage & Committee Stairwell balusters, handrails, and step rise and going must
painted to selected colour. Internal ceilings to receive Meetings Room comply with the current Technical Guidance
3mm thick skim plaster finish on 12.5mm plasterboard, Document Part K for stairs.
painted to selected colour.

Underside of Covered Area: F.F.L. 104.090m

Internal Wall & Ceiling Finishes:
Soffit to have an external smooth plaster finish on All internal walls & ceilings to be cleaned down,
12.5mm thick cement board screw-fixed to Ex prepped, sealed & painted with washable internal
150x50mm treated timber framework, fixed to underside grade, durable paint to selected colour. All
of precast floor slab units, filled with 150mm of HD internal joinery to be undercoated & then receive
insulation. Soffit to be painted to selected colour. Boxing two coats of white satinwood paint
out around steel beam to be of plastered cement board
on proprietary fixing system supported off the steel beam External Render to be of light napp plaster
finish & smooth plastered plinths all around
External Blockwork Piers:
Piers to consist of painted, rendered 100mm thick Internal Doors:
blockwork wrapped around structural steel columns All internal doors are to be oak veneered
to Engineer's details Disabled WC Void with solid oak veneer panels, to matching
Under timber frames with NO saddle to floor
Stairs thresholds.
All entrance & exit doors to have "level access" throughout
c/w proprietary Aco-Drainage channels laid 15mm below
Seating Seating Internal Floor Finishes:
F.F.L. connected to new storm sewer system.
Upstairs Area to have industrial grade
F.F.L. 100.840m carpeting, on underlay, to selected colour
External Paths: F.G.L. 100.690m
Pathway areas to be of 100mm thick mesh F.G.L. 100.690m
reinforced concrete, on 75mm sand & cement
lean mix blinding, except where noted otherwise.
All grassed areas to be soil-prepared, seeded &
ready for lawns.

Foundations: Ground Floor Slab:

All foundations to be 350mm deep, grade C28/35 in-situ 150mm thick, mesh reinforced, power floated concrete
concrete strip footings, to a min depth of 900mm below floor (to 3-4mm tolerance), on 150mm rigid board
Finished Ground Level, with 12mm diameter reinforcing mesh insulation, to minimum thermal conductivity 0.018 W/m.K.
to base, min of 50mm cover under & min 600mm laps. Minimum 25mm thick rigid board insulation to floor slab
perimeter with 1200 gauge DPM on 50mm blinding on Min
225mm well compacted 50mm down hardcore.

REVISION DESCRIPTION DATE

Project: Drawn By: K Coleman

Dressing Rooms Checked By: M Shinnors

Date: June 2016

Address: Newport AFC Roundhouse, Cooneen, Portroe, Nenagh, County Tipperary Scale: As Indicated A1

File: newport_TD_1_2.dwg

Drawing: DRAWING NO.

Member of The Royal Institute of the Architects of Ireland
Cross Sections Tel: 067 34995 - Mob: 087 9875127
E-mail: [email protected]
Registered Architect:
Reg. No. 13081
TD-04
VAT No. 8321128M
PROJECT NO.
???
A1 NOTES:

GENERAL:
1 ALL FINISHES AND FITTINGS TO BE AGREED WITH CLIENT.

ALL HABITABLE ROOMS TO BE VENTILATED.

PROVIDE FOR THE CONTAINMENT OF RADON GAS IN ACCORDANCE

WITH CURRENT BUILDING REGULATIONS.

C2
ALL STRUCTURAL TIMBERS TO COMPLY WITH SR 11 TABLES.

ALL WORK TO BE CARRIED OUT AND ALL MATERIALS USED TO

1 COMPLY WITH CURRENT BUILDING REGULATIONS.
3 3
DO NOT SCALE FROM THIS DRAWING.
3
BUILDER IS TO TAKE RESPONSIBILITY FOR ALL ASPECTS OF SAFETY
ON SITE IN ACCORDANCE WITH CURRENT SAFETY AND HEALTH
REGULATIONS.

COPYRIGHT TO ALL DRAWINGS REMAIN THE PROPERTY OF MARTIN

SHINNORS ARCHITECT.
LEGEND: LEGEND:
3 N.B. PLEASE REVIEW THE ENCLOSED DRAWINGS CAREFULLY
Solid Blockwork Walls Solid Blockwork Rising Walls on BEFORE WORK BEGINS ON SITE AND ANY DISCREPENCIES OR
350mm deep, c28/35 cast PROBLEMS RELATING TO THE DRAWINGS OR THE BUILDING WORKS
in-situ concrete strip footings CONTAINED WITHIN THE DRAWINGS SHOULD BE BROUGHT TO THE
Steel Post Legend: ATTENTION OF THE SUPERVISING ARCHITECT.
Painted SHS corner post, anchored via

C1
Steel Post Legend: FOUNDATIONS
baseplate to foundation all to Engineer's details
THE FOUNDATIONS MUST HAVE AT LEAST A MINIMUM WIDTH
Painted SHS corner post, anchored via

C1
EQUAL TO THREE TIMES THE THICKNESS OF THE WALL IT IS
baseplate to foundation all to Engineer's details
Painted UB Column, anchored via baseplate SUPPORTING. THE MINIMUM DEPTH OF FOUNDATION EXCAVATION
2 2

C2
C2

to foundation all to Engineer's details BELOW FINISHED GROUND LEVEL TO BE 900mm

Painted UB Column, anchored via baseplate THE MINIMUM THICKNESS OF CONCRETE TO BE 350mm. ENSURE

C2
Painted steel beam to foundation all to Engineer's details THAT ALL BLOCKWORK WALLS ARE BUILT FROM A FOUNDATION.
Beam
to Engineer's details THE SPECIFICATIONS FOR THE ABOVE ARE BASED ON NORMAL
Painted steel beam GROUND CONDITIONS
Beam
to Engineer's details
GROUND FLOOR SLAB
USE GOOD QUALITY HARDCORE EG. CLEAN, WELL GRADED BROKEN
1 1 1 STONE, 100mm MAX SIZE. COMPACTED IN LAYERS NOT EXCEEDING
225mm IN DEPTH. & BLINDED WITH A 50mm COVERING OF SAND.
A DAMP PROOF MEMBEANE OF AT LEAST 1200 GAUGE MATERIAL TO
BE LAID, WITH JOINTS LAPPED AND SEALED. 100mm HIGH DENSITY
RIGID INSLUATION TO BE PLACED ON TOP OF DAMP PROOF
MEMBRANE WITH 25mm HIGH DENSITY INSULATION TO BE PLACED
ALONG EDGE OF FLOOR SLAB.

RADON PROTECTION
A SUMP MUST BE PROVIDED WITH CONNECTING PIPEWORK
TERMINATIONG AND CAPPED AT SUITABLE POINTS OUTSIDE THE
EXTERNAL WALLS OF THE DWELLING. IN SITUATIONS WHERE THE
RADON LEVEL IS UNACCEPTABLY HIGH, AN APPROVED RADON
BARRIER OF LOW PERMEABILITY SHOULD ALSO BE USED.

CAVITY WALLS
C2

CAVITY BLOCKWORK CONSTRUCTION TO CONSIST OF 100mm

INNER BLOCKWORK LEAF, 150mm CAVITY AND 100mm OUTER
BLOCKWORK LEAF. 100mm THERMAWALL TW100 HIGH DENSITY
INSULATION TO BE PLACED FIRMLY AGAINST OUTER FACE OF INNER
LEAF AND HELD IN POSITION WITH STAINLESS STEEL WALL TIES
FITTED WITH INSULATION RETAINERS. ENSURE THAT CAVITY IS
KEPT CLEAR FOR BETWEEN 150mm AND 225mm BELOW DPC LEVEL.
ALL WINDOW OPES TO HAVE A FULL DPC "WRAP" PLACED AT
HEADS, JAMBS AND CILLS.
C1

C1
350mm deep, C28/35 cast in-situ concrete ROOF
strip footing, to a minimum depth of 900mm ADEQUATE TRIANGULATION OF THE ROOF SHOULD BE ACHIEVED
below Finished Ground Level with 12mm AT ALL TIMES. 100 x 75mm WALLPLATE TO BE FIXED TO TOP OF
diameter reinforcing mesh to base of footing SUPPORTING WALL WITH GALVANISED STRAPS AT 1.8m CENTRES.
with 50mm cover under and minimum ALL ROOF TIMBERS TO BE TREATED, WITH RAFTERS & CEILING
C1

600mm laps. External wall cavity MUST be JOISTS SET AT 400mm CENTRES. TIMBER PURLINS SHOULD BE
C1

C1
kept clear for between 150mm & 225mm PROPPED AT REGULAR INTERVALS. COLLARS TO BE PLACED AT
below DPC level. Width varies depending on 1600mm CENTRES. VENTILATION TO ROOF SPACE SHOULD BE
width of rising wall - Refer to Sections ACHIEVED BY PROVIDING THE EQUIVALANT OF 10mm CONTINUOUS
STRIP AT EAVES LEVEL.

FIRE SAFETY AND PREVENTION

EVERY BEDROOM SHOULD HAVE A WINDOW WHICH CAN BE USED
AS AN ALTERNATIVE MEANS OF ESCAPE. AN ESCAPE WINDOW
C2

C2

C2

C2
NEEDS TO PROVIDE A CLEAR OPENABLE AREA OF 0.33sq/m WHICH
SHOULD INCLUDE A MINIMUM WIDTH OR HEIGHT OF 450mm. THE
BOTTOM OF THE WINDOW OPENING MUST BE NOT MORE THAN
1100mm AND NOT LESS THAN 800mm (600mm IN THE CASE OF
ROOFLIGHTS) ABOVE FLOOR LEVEL. A MAINS OPERATED FIRE
DETECTION AND ALARM SYSTEM MUST BE PROVIDED. BATTERY
OPERATED SYSTEMS ARE NOT ACCEPTABLE.

DISABLED ACCESS
1780x780mm VELUX "INTEGRA" manually WHEELCAHIR ACCESS TO BE PROVIDED IN ACCORDANCE WITH
operated GGL306021U Pine framed rooflighst with PART M OF THE TECHNICAL GUIDANCE DOCUMENTS 2010.
A B --60 Pane glazing and BDX Insulation Collar. 2 Nr
indicated to serve as emergency escape windows

Emergency Escape Rooflight

Emergency Escape Rooflight

350mm wide external cavity wall. Slated roofs to be of Thrutone Blue Black slates,
Cavity MUST be kept clear for between by Tegral or similar approved, with dry-fixed
100mm wide internal solid block on edge wall 215mm wide internal solid block on flat wall
150mm & 225mm below DPC level. ridge & verges & permanent proprietary over
facia & ridge level ventilation throughout
150mm thick, mesh reinforced,
150mm thick, mesh reinforced, 150mm thick, mesh reinforced, cast in-situ concrete floor slab
cast in-situ concrete floor slab cast in-situ concrete floor slab
F.F.L. F.F.L. F.F.L.

F.G.L.

C C
350mm deep x 1050mm wide, c28/35 cast 350mm deep x 800mm wide, c28/35 350mm deep x 915mm wide, c28/35
in-situ concrete strip footing, to a minimum cast in-situ concrete strip footing, to a cast in-situ concrete strip footing, to
depth of 900mm below Finished Ground Level minimum depth of 900mm below a minimum depth of 900mm below A.O.V.:
with 12mm diameter reinforcing mesh to base Finished Ground Level with 12mm Finished Ground Level with 12mm Stairway to have 1.5m smoke vent at
of footing with 50mm cover under and diameter reinforcing mesh to base of diameter reinforcing mesh to base of ceiling level extracting smoke to outside air
minimum 600mm laps. External wall cavity footing with 50mm cover under and footing with 50mm cover under and through roof covering . ventilation to comply
MUST be kept clear for between 150mm & minimum 600mm laps. minimum 600mm laps. with bs 5588-9:1999
225mm below DPC level.

Typical 350mm Wide External Wall Typical 100mm Wide Internal Wall Typical 215mm Wide Internal Wall
A B

Project: Drawn By: K Coleman

Dressing Rooms Checked By: M Shinnors

Date: June 2016

Address: Newport AFC Roundhouse, Cooneen, Portroe, Nenagh, County Tipperary Scale: As Indicated A1
REVISION DESCRIPTION DATE
File: newport_TD_1_1.dwg
Drawing: DRAWING NO.
Member of The Royal Institute of the Architects of Ireland
Foundation Plan,
Details &
Tel: 067 34995 - Mob: 087 9875127
E-mail: [email protected]
Registered Architect:
Reg. No. 13081
TD-05
VAT No. 8321128M
PROJECT NO:

Roof Layout Plan ???

A1

AJ
AJ AJ AJ
SVP
Beam

C2
BIGT

Boiler Showers WC Showers WC WC Showers WC Showers Boiler Showers WC Showers WC WC Showers WC Showers

Beam
LEGEND: AJ Storage Storage
Foul AJ & Sewer Line
AJ
Storm Water AJ & Storm Line
Changing Changing Changing Changing

C2
Storage Changing Changing Storage Storage Changing Changing Storage
Room 1 Room 2 Room 1 Room 2
New Precast Concrete ACO-Drain

ACO-Drain
Room 3 Room 4 Room 3 Room 4
LEGEND:

ACO-Drain
Aco-Drainage Channel
SVP AJ WC WC

Beam
Soil Vent Pipe
Solid Blockwork Walls
Back Inlet Gully Trap & Downpipe
BIGT

ACO-Drain
Steel Post Legend:
AJ Disabled Disabled Painted SHS corner post, anchored via

C1
WC WC baseplate to foundation all to Engineer's details

C2
Hallway Painted UB Column, anchored via baseplate

C2
to foundation all to Engineer's details

C1
1
Painted steel beam
Beam

Beam

Beam BeamC
Beam
Beam
Up Lintels between steel posts, Up to Engineer's details
supporting glazed screens, to be
of primed & painted structural Beam Beam
steel angle sections, or similar,

Beam
C1
For First Floor Level Structural

C1
Steel beams to

C1
to Engineers details
Covered Area Engineer's details Layout, Refer to First Floor
BIGT Entrance
Layout Plan on Drg T-03
Lobby Beam Beam Beam Beam Beam

C2
AJ AJ ACO-Drain

C2

C2

C2

C2

C2
A B
REF TYPE RATING LEAF OPE SIZE OPENING SWING HUNG
Vision
S1 Panelled
FD30s Single 2100x950mm Inward Right Hand Side
Vision
S2 Panelled
FD30s Single 2100x950mm Inward Left Hand Side
Vision
S3 Panelled
FD30s Single 2100x950mm Inward Right Hand Side
Vision
C C1 D S4 Panelled
FD30s Single 2100x950mm Inward Left Hand Side
Vision
S5 Panelled
FD30s Single 2100x950mm Inward Left Hand Side

S6 Cubicle N/A Single 2100x900mm Inward Right Hand Side

S7 Cubicle N/A Single 2100x900mm Inward Right Hand Side

S8 Cubicle N/A Single 2100x900mm Inward Left Hand Side

S9 Cubicle N/A Single 2100x900mm Inward Left Hand Side

Vision
S10 Panelled
FD30s Single 2100x950mm Outward Right Hand Side
Vision
S11 Panelled
FD30s Single 2100x950mm Outward Left Hand Side
Vision
S12 Panelled
FD30s Single 2100x950mm Inward Right Hand Side
Vision
S13 FD30s Single 2100x950mm Outward Right Hand Side
H Panelled
Vision
S14 Panelled
FD30s Single 2100x950mm Outward Right Hand Side

ALL Internal Doors to be Solid Oak Veneered & Framed, FULL VENEER PANELLED, with
No Saddle, Pull & Push Handles, Kicker-Plates, Cubcle Locks, Hinges, Door Closers etc
E, F G, I
E1 G1,
G2

TYPE REF REF Nr. WIDTH (W) HEIGHT (H) DESCRIPTION NOTES
W13, W15, Double Top Hung Single Toughened FROSTED
A W18,W20
1866mm 600mm
Casement Glass
Double Top Hung Single Toughened FROSTED
A W6 1750mm 600mm
Casement Glass
W5, W7, W12, W14, W16, Single Top Hung Toughened FROSTED
B W17, W18, W19
600mm 600mm
Single Casement Glass
Double Fixed Panes c/w
Toughened CLEAR
C W3 2300mm 2100mm Colour-Matched, Insulated Cladding to
Glass
Internal Corner Post on RHS
Double Fixed Panes c/w
Toughened CLEAR
C1 W23 2300mm 2100mm Colour-Matched, Insulated Cladding
Glass
to Internal Corner Post on LHS
Triple Locking, Double Leaf, Toughened CLEAR Glass, Level
D W1, W27 1800mm 2100mm Outward Opening, Glass Access Threshold & Door
Panelled Main Entrance Doors Closers

Toughened CLEAR
E W2, W24 1350mm 2100mm Single Fixed Pane
Glass

Toughened CLEAR
E1 W28, W28 750mm 2100mm Single Fixed Pane
Glass

Double Top Hung Single Casements

Over Single Fixed Pane c/w Toughened CLEAR
F W4 1350mm 2100mm
Colour-Matched, Insulated Cladding to Glass
External Corner Post on RHS
Single Leaf, Solid Panelled, Outward Chubb Lock, Pull Handle,
H = 2100mm
G W8 975mm
H1 = 490mm
Opening, Hung on Left Hand Side c/w Door Closer & Toughened
Single Fixed Pane Night Light Over CLEAR Glass to Night Light
Single Leaf, Solid Panelled, Outward Chubb Lock, Pull Handle,
H = 2100mm
G1 W9, W10, W11 950mm
H1 = 490mm
Opening, Hung on Right Hand Side c/w Door Closer & Toughened
Single Fixed Pane Night Light Over CLEAR Glass to Night Light
Single Leaf, Solid Panelled, Outward Chubb Lock, Pull Handle, Door
H = 2100mm
G2 W21 950mm
H1 = 490mm
Opening, Hung on Left Hand Side c/w Closer & Toughened CLEAR
Single Fixed Pane Night Light Over Glass to Night Light

Single Side Hung Single Un-Toughened

H W25 800mm 1300mm
Casement CLEAR Glass

Chubb Lock, Barrel Bolts, Pull

Solid Hardwood, Outward Opening,
Handles, Door Closers &
I W22 1800mm 2100mm Solid TG&V Panelled Double Door c/w
Toughened CLEAR Glass to
Double Fixed Pane Night Lights Over
Night Light

Colour to Client's Selection. All Frames to be UPVC Double Glazed Throughout. Toughened Glass to all
glazing below 800mm of FFL. MINIMUM CLEAR OPENING WIDTH TO EXTERNAL DOORS => 775MM
Project: Drawn By: K Coleman

Dressing Rooms Checked By: M Shinnors

Date: June 2016

Address: Newport AFC Roundhouse, Cooneen, Portroe, Nenagh, County Tipperary Scale: As Indicated A1
REVISION DESCRIPTION DATE
File: newport_TD_1_1.dwg
Drawing: DRAWING NO.
Member of The Royal Institute of the Architects of Ireland
Drainage Plan,
Structural Plan &
Tel: 067 34995 - Mob: 087 9875127
E-mail: [email protected]
Registered Architect:
Reg. No. 13081
TD-06
VAT No. 8321128M
PROJECT NO:
Schedules ???