Auger Forklift: Known Also As A Dumper Truck or Tipper Truck Is Used For Transporting Loose Material For Construction

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

AUGER drilling device, or drill bit, that usually includes a rotating helical FORKLIFT powered industrial truck used

powered industrial truck used to lift and move materials over


screw blade called a "flighting" to act as a screw conveyor to remove the drilled out material. short distances. The forklift was developed in the early 20th century by various companies,
including Clark, which made transmissions and Yale & Towne Manufacturing.

BULLDOZER a powerful tractor with a broad upright blade at the front EXCAVATOR are heavy construction equipment consisting of a boom,
for clearing ground. dipper, bucket and cab on a rotating platform known as the "house".

BACKHOE also called rear actor or back actor — is a type of excavating DUMPTRUCK known also as a dumper truck or tipper truck is used
equipment, or digger, consisting of a digging bucket on the end of a two-part articulated arm. for transporting loose material for construction.
BACKHOE is a heavy equipment machine used in construction to move CONCRETE MIXER is a device that homogeneously combines
aside or load materials such as asphalt, demolition debris, dirt, snow, feed, gravel, logs, raw cement, aggregate such as sand or gravel, and water to form concrete. A typical concrete
minerals, recycled material, rock, sand, woodchips, etc. mixer uses a revolving drum to mix the components.

ROAD ROLLER a compactor type engineering vehicle used to AGITATOR TRUCK/ CONCRETE MIXER often
compact soil, gravel, concrete, or asphalt in the construction of roads and foundations. Similar colloquially called a cement mixer) is a device that homogeneously combines cement,
rollers are used also at landfills or in agriculture. aggregate such as sand or gravel, and water to form concrete.

TRENCHER a piece of construction equipment used to dig trenches, CONCRETE BATCHING PLANT is equipment that
especially for laying pipes or electrical cables, for installing drainage, or in preparation for combines various ingredients to form concrete. Some of these inputs include water, air,
trench warfare.. admixtures, sand, aggregate, fly ash, silica fume, slag, and cement.
SCRAPERS can move dirt and aggregates quickly around a construction
site and is used primarily for digging and leveling large areas of land.

CRANE a type of machine, generally equipped with a hoist rope, wire ropes
or chains, and sheaves, that can be used both to lift and lower materials and to move them
horizontally.

CRANE TYPES

GRADER also commonly referred to as a road grader or a motor grader,


is a construction machine with a long blade used to create a flat surface during the grading
process.

GRADALL offers a unique range of excavator undercarriages that have


reshaped the industry idea of equipment mobility, both on and off highways. ELEVATION VIEW OF HEAVY EQUIPMENT

CONCRETE PAVERS typically use a "slipform" process to pave


roadways, first spreading fluid concrete placed on the grade with an auger, then removing
excess material with a strike-off plate

You might also like